i installed emanoN rom v7 a few months and reverting back to stock rom downloaded from samfirmware.com for some reasons
now i again flashed cyanogenmod 10.1 by rohan007(no doubt, its a great rom) :good: about a week ago
but it is too much for my mini to handle that....ram usage is always above 200 mb(why its said that mini has 384 mb ram while we get only 280 )
so i want to revert back to that stock rom which i dowloaded
but when i try to install from sd card-->choose file-->s5570ddkq7_ddkq6_INU
i get something like
e:/s5570_ddkq6_inu
(bad)
Installation aborted
WHY :crying: it worked earlier
PS: i tried from different microSD cards and copied for around 3 times to the microsd card
This will fix your problem (guides aren't mine)
Guide http://forum.xda-developers.com/showthread.php?t=1255305
Another good guide: http://forum.xda-developers.com/showthread.php?t=1551586
To root use "universal gingerbread root v.2.5"
I've tested with XWKTN ROM and all works fine.
Btw, test "chocobread" or "democracy" ROM's. Inmo they are good looking with good performance.
jeremypt said:
This will fix your problem (guides aren't mine)
Guide http://forum.xda-developers.com/showthread.php?t=1255305
Another good guide: http://forum.xda-developers.com/showthread.php?t=1551586
To root use "universal gingerbread root v.2.5"
I've tested with XWKTN ROM and all works fine.
Btw, test "chocobread" or "democracy" ROM's. Inmo they are good looking with good performance.
Click to expand...
Click to collapse
okk i got that...but do i need to download it again? (i am already past usage limit)
i have the file in .zip format which worked earlier through update from sd card in recovery mode
Galaxy_Addict said:
okk i got that...but do i need to download it again? (i am already past usage limit)
i have the file in .zip format which worked earlier through update from sd card in recovery mode
Click to expand...
Click to collapse
Open the ZIP (extract) in your computer. If you have 4 md5 files you need to flash using the 4 files method
If you have only 1 md5 file you need to flash using the 1 file method.
This is how you flash stock firmware, modded is flashed from SDcard using CWM.
jeremypt said:
Open the ZIP (extract) in your computer. If you have 4 md5 files you need to flash using the 4 files method
If you have only 1 md5 file you need to flash using the 1 file method.
This is how you flash stock firmware, modded is flashed from SDcard using CWM.
Click to expand...
Click to collapse
thanks mate for the info...there is a single .md5 file so i tried to flash using odin...but that odin is not detecting my phone
i think that my pc has all the drivers installed in it because i have the latest kies and usb mass storage,and usb tethering are working fine
odin worked when i first flashed my rom (emanoN v7)...but now its not working
any other alternatives please..!!!
you need to put the phone in download mode.
With the phone OFF, hold "volume down" + "power" + "home" untill you see the "download mode" screen.
Galaxy_Addict said:
thanks mate for the info...there is a single .md5 file so i tried to flash using odin...but that odin is not detecting my phone
i think that my pc has all the drivers installed in it because i have the latest kies and usb mass storage,and usb tethering are working fine
odin worked when i first flashed my rom (emanoN v7)...but now its not working
any other alternatives please..!!!
Click to expand...
Click to collapse
Just remove any model name from ops file & then place it in OPS field.
Remember, odin detects ur phone through the ops file..., no matter whether it's physically connected to pc or not (at that instant).
Disable kies b4 Starting.
Sent Via XDA™ Premium
jeremypt said:
you need to put the phone in download mode.
With the phone OFF, hold "volume down" + "power" + "home" untill you see the "download mode" screen.
Click to expand...
Click to collapse
i know that bro...i am not that much of a noob
Galaxy_Rohit said:
Just remove any model name from ops file & then place it in OPS field.
Remember, odin detects ur phone through the ops file..., no matter whether it's physically connected to pc or not (at that instant).
Disable kies b4 Starting.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
so do i need to rename the file from tass.ops to what?
not a noob
how will you flash a tar file with cwm and you said you were successful last time
ops's name must be TASS.ops
dheeraj (dhlalit11) said:
not a noob
how will you flash a tar file with cwm and you said you were successful last time
ops's name must be TASS.ops
Click to expand...
Click to collapse
when did i say that i flashed a tar file using cwm....i flashed the .zip file using cwm
does usb debugging has anything to do with this..?
can you tell which firmware comes in zipped file
either the firmware would be tar or tar. md5
no usb debugging is not related download mode is
dheeraj (dhlalit11) said:
can you tell which firmware comes in zipped file
either the firmware would be tar or tar. md5
no usb debugging is not related download mode is
Click to expand...
Click to collapse
take a look here, they are the original samsung firmwares and they come in zipped files - www.sammobile.com/firmware/
secondly i think i found the problem....in devices and printers- when i connect the phone it automatically shows "MSM7x27" unspecified device
u are missing drivers for it
i troubleshooted the problem and searched and installed many drivers for it but still no luck
when you will open the zip you will see tar files
ok lets be on the topic this means you have not installed tar files
download Kies latest version and install it
close it completely
open Odin and select files
boot mobile into download mode and connect it (do this after opening odin)
dheeraj (dhlalit11) said:
when you will open the zip you will see tar files
ok lets be on the topic this means you have not installed tar files
download Kies latest version and install it
close it completely
open Odin and select files
boot mobile into download mode and connect it (do this after opening odin)
Click to expand...
Click to collapse
already installed latest kies...closed it from task manager
tried doing that...yes there are tar files in the archive
i 'll try doing this on another laptop and let u know if it works
i finally found d problem....it is the msm7x27 missing on my laptop
its bcoz i recently upgraded to windows 8 pro 64 bit...it will work on any other pc running 7
the problem is resolved but still i want those drivers for windows 8 pro x64..if u found them please let me know
Related
Hi there,
i was trying to flash my samsung galaxy s and put darky's on it but for some reason i can't.
The recovery screen that pops op says recovery 3e (and every tutorial i found said 2e),
i try to "apply sdcard:update.zip
(i downloaded the update file from the darky roms thread)
and i get the error: failed to verify whole-file signature
signature verification failed, installation aborted.
i've got a samsung galaxy I9000XWJPA.
I've flashed the phone using z4root.
Then i've checked with terminal emulator that it's rooted.
I think that there's a problem with clockwork, or that i just didn't install that correctly, so i'm kinda stuck at the moment :s
could someone please help me?
First of all you should get the busybox file and flash it. Then copy the update.zip into the internal sd card and copy the darky rom too.
Before doing this i would restore it to factory settings. Dont root it with z4root, the busybox roots it and it allows you to open the update.zip
Try what i said and it should work.
Sent from my GT-I9000 using Tapatalk
You are on Android 2.2 which has the 3e recovery. 3e recovery doesn't allow using unsigned .zip files. You should first downgrade your recovery to 2e by flashing CF-root. After you downgrade your recovery, you'll be able to use any update.zip file.
You can find CF-root in this link:
http://forum.xda-developers.com/showthread.php?t=788108
Since you have XWJPA, you should download the JPA version from the second post. Instructions are in the first post.
Make sure you have 3-button recovery and download modes working before flashing.
oh that's via odin3 right?
i'll try that, thanks
Tell us if there's any problem.
Sent from my GT-I9000 using Tapatalk
hmm, i've followed all the steps, downloaded odin, and the CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar file, but the download screen only says "downloading, do not turn off target!!!
is there any particular setting or where to place the .tar file?
mavu said:
hmm, i've followed all the steps, downloaded odin, and the CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar file, but the download screen only says "downloading, do not turn off target!!!
is there any particular setting or where to place the .tar file?
Click to expand...
Click to collapse
Ok.
First of all disconnect the galaxy from the pc. Close odin. Open Odin, put in PDA CF-Root-XW_XEE_JPA-v1.2-Busybox-1.17.1.tar
Then shut down the galaxy. Reboot it again to download mode. Connect it via usb and then click start. Make sure re-partition isn't checked.
That's it. When setting up odin you can't have the galaxy connected to he computer. If something fails on download mode, you must always restart the download mode or it'll be stuck.
Good luck
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
mavu said:
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
Click to expand...
Click to collapse
It should recognize it when you connect it in download mode...
Mine recognizes it as COM4.
This may be simple, but restart your computer and phone and see if it works.
mavu said:
aha, found the problem:
there doesn't appear a comport in odin
new problem, how do i get the phone recognized?
Click to expand...
Click to collapse
It should recognize it when you connect it in download mode...
Mine recognizes it as COM4.
This may be simple, but restart your computer and phone and see if it works.
If not, re-install the drivers for your phone
hi mate i had exactly the same problems as you and it done my head in for about a day and a half but then someone gave me this advice and it worked a treat,
go to market
download sgs kernel
once done flash speedmod kernel using the app
re start phone
once done download darkys rom
reboot to download mode (should now have 2e)
flash zip
choose zip
find darkys
click yes instal darkys
job done
one thing i must point out in 2e is the back button on your phone is now the select button and the menu button on the bottom left is now your back button
hope this helps as it did for me
Restart your pc and make sure Kies is not working at all.
thanks man! reinstalling the drivers did the trick ten points for coldflid!!!
steve57925 said:
go to market
download sgs kernel
once done flash speedmod kernel using the app
re start phone
once done download darkys rom
reboot to download mode (should now have 2e)
flash zip
choose zip
find darkys
click yes instal darkys
job done
Click to expand...
Click to collapse
For the record, people do NOT have to flash Darkys or any other custom ROM to get 2e. Simply flashing a kernel that has Clockwork Recovery included will do the trick. Your reco to flash SpeedMod would have solved the problem without having to go further.
Very true but he wanted darkys which was the only reason I mentioned but good to point out for others reading the post
Sent from my GT-I9000 using XDA App
mavu said:
thanks man! reinstalling the drivers did the trick ten points for coldflid!!!
Click to expand...
Click to collapse
Im happy ir worked =]
Sent from my GT-I9000 using Tapatalk
steve57925 said:
Very true but he wanted darkys which was the only reason I mentioned but good to point out for others reading the post
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You're 100% correct - my mistake for missing it on the first go-around.
not a problem
Hello ,
I have a similar problem with my Galaxy S I9000 .
I've updated it via KIES to the latest Froyo ( 2.2 as it shows my phone ) .
Next , I tried to install the voodoo lagfix .
I downloaded the .zip file and renamed it to "update.zip" .
Then I copied it to my phone's sd card ( I connect to PC via usb and copied in the 'Phone' folder ) .
Next , I used the 3 buttons ( Volume UP + middle button + turn off button ) and it got into Recovery mode .
I selected the 'update.zip' file and accesed it , but it says :
"E: signature verification failed, installation aborted."
I have to downgrade to 2E first ?
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.
Hello XDA Community,
I am an 2 year XDA veteran, so i am properly familiar with all things related to XDA.
I currently own a Xperia X10 Mini Pro and a Xperia Mini Pro....
I tinker a lot with these 2 phones. SE phones mainly need fastboot.....
I just brought a Samsung Galaxy Note(SGN) N7000 (India) a few days back and am really excited to run CM9 on it.....
But i have alot of unanswered questions.....
So i just need the community's help...
1. Does the SGN have a stock recovery....????
My cousin has a Galaxy Tab 8.9 and it had a stock recovery. I just flashed a zip to root it and another zip for CWM......
2. What exactly is ODIN....?????
The Tab 8.9 had ODIN with a Recovery but our SGN does not seem to have one.......
3. Is it safe to upgrade to official Samsung ICS......????
There is alot of talk going on in the forum about HARD BRICKING our SGN if we upgrade........
4. What do i exactly have to do to get CWM......????
The guides in Development Section by dr.ketan have me totally confused, though i have rooted my SGN using DoomLord's Kit............
I am new to Samsung devices ant dont know the way they work.....
So any help will be extremely appreciated.......
Thanks.
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
lhamza said:
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
amey2606 said:
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Click to expand...
Click to collapse
You are talking about download mod just download your rom and put it on odin and start downloading
Sent from my I9300 using XDA Premium
Xalies said:
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
Click to expand...
Click to collapse
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
amey2606 said:
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
Click to expand...
Click to collapse
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
lhamza said:
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
amey2606 said:
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
Click to expand...
Click to collapse
ok. first tell me what rom do you want.
and from what country?
lhamza said:
ok. first tell me what rom do you want.
and from what country?
Click to expand...
Click to collapse
I installed ROM Manager from market but there is no recovery for SGN N7000......
I am from India (INU)
I wanted to update to the official Samsung ICS ROM........
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
lhamza said:
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
Click to expand...
Click to collapse
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
amey2606 said:
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
Click to expand...
Click to collapse
you can install it with odin mobile
http://turbobit.net/download/free/wcsc1f8j8p8c
here is the cwm link http://download.chainfire.eu/163/CF-Root/SGN/CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip?retrieve_file=1
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
lhamza said:
you can install it with odin
download it from attachement
the same thing choose pda then choose cwm and start
or flash it with odin mobile http://turbobit.net/download/free/wcsc1f8j8p8c
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
Click to expand...
Click to collapse
This is using ODIN, but how can i install CWM using stock recovery......?????
amey2606 said:
This is using ODIN, but how can i install CWM using stock recovery......?????
Click to expand...
Click to collapse
i change the last post check it
lhamza said:
i change the last post check it
Click to expand...
Click to collapse
ok thanks but i think i am still confused, a lot.....
odin is terrifying me (dont want to brick my note).......
i will try it later.....
XPERIA phones were not so complicated.
thanks for all your help though...... ;-)
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
lhamza said:
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
Click to expand...
Click to collapse
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Moved To Q&A
Please post all questions in the Q&A section
amey2606 said:
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Click to expand...
Click to collapse
Yes you can do that. Just search for it and you will find it
sent from my S9300 using XDA Premium
Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.
IReSky said:
Hello,
I'm pretty newbie when dealing with phones, yet pretty good with PCs in general. Which throws me off is mainly term used which means nothing to me. So I'll be as blunt as possible:
how can I reinstall my Samsung Galaxy Ace? Like a fresh install... I tried to do various things with it, ended up by installing jellybean 4.0 and not sure where but it went wrong but it doesn't boot now. I can enter PX-Recovery window, use all rooted functions. Best result I had was when device was booting after "installing a rom from sd card" was a blue screen when loading or just bright screen like the device is on yet nothing else.
Thanks in advance.
Click to expand...
Click to collapse
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402
I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Viper The Ripper said:
Yes, you can flash a fresh stock rom using Odin 4.38
Follow this guide
forum.xda-developers.com/showthread.php?t=1034145?
Here you have a useful Q&A Thread (How to get Root + CWM 5.0.2.6 Fixed, flash a stock rom, and many more...)
forum.xda-developers.com/showthread.php?p=42293402
Click to expand...
Click to collapse
IReSky said:
I was digging that thread and I couldn't find any working links. That thread led to few others websites/threads which also had OPS + Odin links thought they were useless too because none of the download links worked..
Any idea where could I get those OPS files from? I've managed to find Odin 4.38, now I only need the OPS.
Click to expand...
Click to collapse
Here you have it
Viper The Ripper said:
Here you have it
Click to expand...
Click to collapse
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Extract previously downloaded firmware
Open ODIN 4.38 on your PC and change OPS file name to
Cooper_v1.0.ops
Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
If archive contains only <filename>.tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Click to expand...
Click to collapse
IReSky said:
Shouldn't the zip contain all the OPS files that I would need to input in Odin?
Click to expand...
Click to collapse
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)
a
Viper The Ripper said:
No... ".ops" file is an unique file, Odin need it recognize your device model
Select ONE PACKAGE and continue the guide (the new firmwares)
Official Firmwares website, choose your country if you want
x
You'll find: Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC in FULL PACKAGE ROMS (normally old roms)
Click to expand...
Click to collapse
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?
IReSky said:
Kies doesn't wanna start when the phone is plugged yet starts with no device found and Odin says "Please connect phones !!".
I did format /system... could that be the cause?
Click to expand...
Click to collapse
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])
Viper The Ripper said:
No.
Restore a backup if you want and enable USB debug mode, unistall Kies, re-install Samsung drivers and try again using Odin.
You can try changing the USB port too (even using other PC, if you can [friend, brother, father...])
Click to expand...
Click to collapse
Sadly I didn't make a backup thinking it will work.. I will try the other things in a moment. thanks
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
arnouf said:
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
Click to expand...
Click to collapse
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
omarainea said:
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
Click to expand...
Click to collapse
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
arnouf said:
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
Click to expand...
Click to collapse
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
omarainea said:
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
Click to expand...
Click to collapse
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
arnouf said:
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
Click to expand...
Click to collapse
Or your nand is really broken
I've a similar issue in /data partition (it can't be writtable after a try to flash with Odin from a virtual machine) and I fixed it with the PIT file to repartition, reflash stock firmware and then a wipe/factory reset from stock recovery (I think it did a format)...
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
arnouf said:
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
Click to expand...
Click to collapse
I think the same as @omarainea have posted...
jolinnard said:
I think the same as @omarainea have posted...
Click to expand...
Click to collapse
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
arnouf said:
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
Click to expand...
Click to collapse
what did you do to break your device ??
omarainea said:
what did you do to break your device ??
Click to expand...
Click to collapse
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
arnouf said:
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
Click to expand...
Click to collapse
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
Click to expand...
Click to collapse
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
omarainea said:
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
Click to expand...
Click to collapse
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
arnouf said:
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
Click to expand...
Click to collapse
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
jolinnard said:
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
Click to expand...
Click to collapse
Heimdall works for our tablets. I use it for P7300, for example.
DemonGloom said:
Heimdall works for our tablets. I use it for P7300, for example.
Click to expand...
Click to collapse
Ok, so I don't know what could happen when I tried it, I think last time was in 2012 or maybe early 2013...