Related
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
put your phone in download mode , and use odin to reflash a stock rom...then start again
thanks for reply. how can i reflash into stock rom is there any link where it shows the tutorial ?
thanks
nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
Flashing Video Guide for Stock XXJVU
now another problem comes in phone is not going into download mode?
could that b cause of battery gone down to less then 20%?
Your battery should be at least 50% before flashing.
i m not sure at the moment it was 90% before. my phone was going into download mode but i did 1click downloader and instaler at&t firmware and now its not going into download mode ??
You could try this nbkhan : Download Android sdk (google it as i cant post external links in forum yet)
Extract this at the loacation c:\AndroidSDK
Connect phone to PC and Install Drivers
now go to Start > RUN > type cmd
go to this directrory " c:\AndroidSDK\tools "
now type " adb reboot download "
Your phone will reboot and will go into bootmode.
You could also consider building or purchasing a usb jig(google it)
pc does not recognize my phone.
Were you were flashing an ics rom? if so you need nexus drivers installed on your comp which can be found here : w w w.multiupload.co.uk/BUCFT8M42N
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
nbkhan said:
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
Click to expand...
Click to collapse
You could try the one click unbrick from here : http://forum.xda-developers.com/showthread.php?t=1153310 , if that does not work you will have to buy/make a usb jig to force download mode.
Jigs are well worth the money, just a couple of £/$ and save your phone.
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.
Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T
Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App
if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium
I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.
picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app
HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
momsbest said:
HI XDA
I got this sgh-t599 tmobile phone yesterday. (didn't realize it was rooted) messed around/did factory reset without backup.
now im stuck in CWM recovery 6.0.3.6, Ive spent several hours readind and trying to fix this with no luck.
I tried using adb, kies etc. none can detect device. device drivers are installed(tried 'have disk'), it shows Samsung under device manager.
I can device list in adb and shows the numbers and "recovery" but when i try to use commands it says "waiting for device" or something.
from what i read, i need unsecure boot to restore firmware. where can i get this and how do i do it pls.
i have no mount usb option in cwm, when i try to recover/update from cwm it says aborted. in adb im able to reboot the phone with the commands but always reboots to cwm recovery or waiting for device. any help pls. i may have access to another rooted t599 if i am able to backup and recover it to this phone?:crying:
do you think local phone repair shop can fix this back to stock or rooted and for how much?
Click to expand...
Click to collapse
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
tys0n said:
You must have format system or something. A factory reset wipes cache and data, nothing else. There should be a homebrew odin-file somewhere in these t599 threads.
Click to expand...
Click to collapse
phone was rooted and had superuser etc on it. I didn't know about rooting, I did factory reset from the main menu which im pretty sure is what caused this. before that I was able to look through its apps where I saw the superuser,terninal and others, once factory reset it rebooted to cwm recovery and stuck there. there was no backup or side sdcard. only realized it was rooted after saw the cwm and stuck
odin doesnt detect phone either, downloaded/installed universal drivers still no go.
main issue is not being to able enable usb debug/download while still in cwm
repair shop says $30, about to run there
i caused my friends sgh-t599 to do that
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
tnx so much
Thank you very much.I looked for a stock rom/recovery image.etc.took me a while till I came across with this .it was a metro pcs/exhibit sgh_t599.I bricked it playing with it.u no.uninstalling unnecessary apps.lol.so my wife got mad.cause is not the first one.
Also had an alcatel,galaxy s3,etc.bricked of course.but thanks for the files.God bless
help
Hello guys , i got a very serious problem here . i'm using samsung galaxy exhibit t599 .
The problem is , why is the signal of my phone always EDGE .
if i setting to Wcdma only (3G) , the signal is gone ,it just like the provider isn't supporting 3G , but it is support . I already trying another provider , the same thing always happen.
pleasee help me , do u guys have any suggestion about what i am suppose to do ?
thank you.
shorty9210 said:
So... This might be late.... But I'm going to postthis for others .... So I was looking for ever for a way to unbrick his phone... Then hope Finley came .. After I read hard enough .. And came across a post for a stock pre-rooted tar file to be flashed with Odin...
^Odin V3.09
http://odindownload.com/
^PreRooted Stock ROM for SGH-T599
https://docs.google.com/uc?id=0B8oW93h4qD3-X3UxdFl5VlhzZVU&export=downloads
° so to unbrick you're SGH-T599 after downloading the two files above
1§t: put sgh-t599 in download mode(vol.down+home+power).... Plug in and press vol. Up
2ed: Open odin 3.09.. Wait for added to show up (mite have to unplug then re plug the phone)..
Click on AP and find 0B8oW93h4qD3-X3UxdFl5VlhzZVU.tar
........ It should take awhile ......
Then after you're phone boots up... An after you set everything up
.... GET two apps from the play store
° install one of the superuser apps
° then get a root checker as app
^EXTRAS(maybe needed)
°one of BusyBox apps from play store
° SU checker app from the play store
HOPE EVERYTHING WORKS WELL FOR ANYONE WHO NEEDS THIS TO ATTEMPT TO UNBRICK YOU'RE DEVICE
....
PS IM NOT RESPONSIBLE IF ANYTHING ELSE GOES WRONG
....
LAST BUT NOT LEAST I DID NOT MAKE THIS ROM... I JUST FOUND IT AND CAME UP WITH A EASY TO DO TUTORIAL
Click to expand...
Click to collapse
Can i use this on SGH-T599V?
Jay_SEAN said:
Can i use this on SGH-T599V?
Click to expand...
Click to collapse
Awe not going to lie but it's been a long time sense then lol but I have had success flashing ROMs from different veriants of models but to be safe I would download this specific one( http://d-h.st/Z5c )just to be safe an then fallow my steps.
Good luck hope it helps