Database Develop

How to enter in to bootloader mode

Can anyone please guide me how to enter to bootloader mode? I want to upgrade my Radio. : :?
to get my XDA IIi into the bootloader, I keep trying the reccord button, power, and hard reset but it just does a hard reset and comes up with the O2 splash and then loads windows???
am I doing something wrong here?
Can anyone pls. advise me??
Priyal

To get to bootloader, you need to press and hold the power button, the action button (the d-pad) and the reset button for about 2 seconds until serial is displayed clearly on the screen.

where to find the reset button
i have krome navigator f1
i am holding dpad + power button but not able to find the reset button..please help me how to find it

hardreset.eu/images/o2_xda_2i_hard_reset_soft_reset.jpg

How can I verify Hard-SPL is installed?

I need to verify that its installed before I proceed to flash my rom.
Also, what is a .nbh file used for?

BorrowADolla said:
I need to verify that its installed before I proceed to flash my rom.
Also, what is a .nbh file used for?
Click to expand...
Click to collapse
Hold down the power button & camera button at the same time then press the reset button with your stylus and keep holding the power & camera button...you should see the following
KAISXXX MFG
SPL-1.0.Olipof
CPLD-8
XXX is your model number, IE 130 120 100

I just learned this myself yesterday....
You need to press only the camera button (a deep press) together with the SR slot, and hold until you get the tricolor screen.
No need to press the power button as well.

thanks, i have it

How can i format Diamond?

Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::

dont the manual spc how a hardreset is performed ?

Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.

download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory

Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.

rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right

what combination did you do to get to bootloader? just so we all know
im glad to help
Rory

rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.

go to bootloader is:
hold down button and press (red) reset button

Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse

I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.

HTC One Bricked...Please help!

My phone was rooted and I tried installing the update to my HTC One Developer Edition. The device is now stuck on the black screen with HTC logo in the middle and 4 exclamation points (in triangles) on the 4 corners. I tried running the RUU but it can't find the device and when I try to run it via the command prompt using the zip file I get the error code "failed (remote 90 hboot pre-update please flush image again immediately)." Does anyone have experience with this and is there ANY way I can unbrick my device without sending it back to HTC for repair!? I'm really frustrated but thanks in advance.
EDIT: I also can't get into the bootloader by holding down power down and the power button. It just reboots into the same screen.

NextNexus said:
My phone was rooted and I tried installing the update to my HTC One Developer Edition. The device is now stuck on the black screen with HTC logo in the middle and 4 exclamation points (in triangles) on the 4 corners. I tried running the RUU but it can't find the device and when I try to run it via the command prompt using the zip file I get the error code "failed (remote 90 hboot pre-update please flush image again immediately)." Does anyone have experience with this and is there ANY way I can unbrick my device without sending it back to HTC for repair!? I'm really frustrated but thanks in advance.
EDIT: I also can't get into the bootloader by holding down power down and the power button. It just reboots into the same screen.
Click to expand...
Click to collapse
You can power off your device ?
If so, try to hold vol down, hit power to power on your device and do not release vol down.
If not, I just can tell you to wait it's run off battery, plug it in and do what i said. I had more or less the same issue and i have managed to go into the bootloader.

Adim0 said:
You can power off your device ?
If so, try to hold vol down, hit power to power on your device and do not release vol down.
If not, I just can tell you to wait it's run off battery, plug it in and do what i said. I had more or less the same issue and i have managed to go into the bootloader.
Click to expand...
Click to collapse
No I can't power down the device. I can reboot it but it just reboots into the same screen. When you say you had the same issue, you let the battery run out and then did what exactly?

NextNexus said:
No I can't power down the device. I can reboot it but it just reboots into the same screen. When you say you had the same issue, you let the battery run out and then did what exactly?
Click to expand...
Click to collapse
I just was stucked in the splash screen. I was holding the vol down button (device off) and get to power the phone with power, but relseasing it (power, not vol down) right after he commence to boot and still hold on vol down. Then i go into bootloader menu.
I don't now if my english is good, because I'm not english :angel: But tell me if you can't understand what I mean

[Q] "Volume -" + "Power" doesn't work on my phone

I tried to Root my phone, first i start by unlocking it with HTC website help, everything was fine till the end of unlocking process. after that when i want to install Recovery i couldn't get to boot screen with holding down the Volume - and Power. Is there any other way to get to boot screen??!

hootan2003 said:
I tried to Root my phone, first i start by unlocking it with HTC website help, everything was fine till the end of unlocking process. after that when i want to install Recovery i couldn't get to boot screen with holding down the Volume - and Power. Is there any other way to get to boot screen??!
Click to expand...
Click to collapse
Go to Settings, then Power. By default, fast boot box will be checked. Uncheck that box. Then power off the phone and then, power+volume down buttons will get you into bootloader

raghav kapur said:
Go to Settings, then Power. By default, fast boot box will be checked. Uncheck that box. Then power off the phone and then, power+volume down buttons will get you into bootloader
Click to expand...
Click to collapse
Thank youuuuuu