Stuck on recovery - Galaxy S I9000 Q&A, Help & Troubleshooting

I am new to this phone.I was running stock 2'3'6 and rooted through semophore.I flashed a jb rom with fullwipe,but stuck on samsung screen.restore from nandroid back also not working.as some one said in this forum,I downloaded and copied mackay kernal to ext sdcard.now sdcard wont recognize by recovery.now I am stuck on recoveryany gurus can help me....
Sent from my SCH-I535 using xda app-developers app.

AW: Stuck on recovery
Can you get into download mode? If yes try flashing stock firmware via odin again and then flash the cf root kernel.
Sent from my GT-I9000 using xda app-developers app

Flash Devil Kernel (the .tar file) in Download Mode via Odin and then when you see on the phone the Devil Logo, pull out the battery, place it back in and boot into recovery using the 3 button combo then you can wipe everything again and flash the rom you want from external sdcard or internal and the bootloop will be fixed
Sent from my GT-I9000 using Tapatalk 2

Related

[Q:] Need Bootloader file for ODIN

i Have Brike my Galaxy Note GT7000.
i see only the Boot Logo.
Via ODIN i am able to install the Stock Roms,
But this do not Fix the Boot Loop Problem.
i see in ODIN the Option "Phone Bootloader update"
can somebody send me a Bootloader file for any Stock ROM ICS or GB ?
or have anyone a other idea ? its my first Brike, so please help
After flashing have you wiped cache and data?
Sent from my GT-N7000 using xda app-developers app
Yes, but zu 99% the Wipe process hangs also up to 10 min, than the phone makes a restart.
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
SpyderTracks said:
When you flash a stock ROM via pc odin, does it complete successfully? If you're on stock ics, flash hydracore kernel via pc odin, then try to boot. Sounds like it's a corrupt kernel installation.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Its the same,
i have flash the Stock ICS via ODIN, and after this i have Flash the HydraCore v5.1
its the same, (now the Galaxy Note Logo has the Triangle to)
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
After installing hydracore... Try do a wipe cache dalvik and factory reset.
Sent from my GT-N7000 using xda premium
---------- Post added at 04:09 AM ---------- Previous post was at 04:09 AM ----------
Yellow triangle can be removed by triangle away
Sent from my GT-N7000 using xda premium
letters_to_cleo said:
try flashing back to stock GB and see if you can bootup your Note after. Usually corrupted bootloaders are fix when you flash back a stock ROM on it...if stock ICS does not work.. then try flashing your phone back to Stock GB.
Click to expand...
Click to collapse
I have try a Stock GB via ODIN, but its still the same
for what is the PhoneBootloader Update in ODIN, exist any Firmware for this ?
India KL3 having bootloader.(that's why i prefer it all time)
wipe cache and data after flashing said ROM.

How to install clockwork recovery without odin and computer?

Hi
My Rom is 2.3.6 JW8 and my laptop is in services center for some issue.
I want to install CM7 Rom and I have nand backup but clockwork recovery not support that feathers. It's Samsung stock recovery.
Sent from my GT-I9000 using Tapatalk 2
I think I found it:
Mobile odin
sgs Kernel flasher
Sent from my GT-I9000 using Tapatalk 2
I don't think mobile odin work for SGS and it doesn't install the cwm,correct me if im wrong..

back to stock rom

iam now on alliance rom and i want to try the original stock rom of 4.0.4
how can i do that?
Download the ics rom and flash it via pc odin
Search button also helps
http://forum.xda-developers.com/showthread.php?t=1424997
when you flash your new rom, it is recommended to flash safe kernel like this. Flashable through stock recovery.
http://forum.xda-developers.com/showthread.php?t=1901191
In my opinion the safest way is to flash gb rom and den go for ics.it is my opinion.
Customs kernel are safe but i would recommend you like this.
See if you flashed ics directly from alliance rom and you got stuck in bw den it wud be a problem for you.
Sent from my GT-N7000 using xda app-developers app
actually no need to flash twice. flash ics flash philz or any safe kernel. and do a factory reset.
I would suggest philz cuz it can be flashed from stock recovery and u will get cwm and root as well
thanksafter i flashed the safe kernel can i flash the stock rom from recovery?iits to much work and time to use pc odin.
You can use mobile odin for this.recovery flash is for custom roms.
Hit thanks button please
Sent from my GT-N7000 using xda app-developers app
ok.in mobile odin should i have to put tar file also in kernel option ?or just the rom file.
See if you hv already flashed a safe kernel then i dnt thnk.well pif not den put kernel in kernel and rom in open file.
Sent from my GT-N7000 using xda app-developers app
in mobile Odin just click on "open file" and select the ROM in tar,md5 format.. it will select all the other partitions automatically

Samsung logo and yellow sign and phone powers off

Hi all, if anyone could help me, it would be much appreciated, i had n7000ddlr1 rooted with exynosabuse and stock kernel..i tried PhilZ-cwm6-UBLS4-TCE-3.81.tar from pc odin and it said pass and all i got was samsung first logo with yellow exclamation and then phone does not power up...tried the power button but again shows the same logo and yellow triangle and nothing after that...please help....i can go to download and recovery mode though...help me..:crying:
Sounds like theres no rom installed, or a corrupt system.
do a factory reset in recovery (be sure philz kernel is installed before doing so) and then reboot, if it still fails to boot, flash a rom through recovery or stock firmware with odin.
the yellow triangle can be removed later using triangle away.
Hy Aron,
Merry Christmas.
Do you have angeloms kernel?
Thanks for the response..i have restored it already..i had custom stock rooted n stock kernel n i have tried to flash Cm10 n philz..i have tried first one from recovery mode using zip file n philz one from pc odin using .tar file (not sure if i had to use something else along with that file) both times i had issues n cant seem to get a custom kernel...can u help me get a custom kernel with step by step instructions..thanks..merry christmas...
Sent from my GT-N7000 using xda app-developers app
nokiamodeln91 said:
Hy Aron,
Merry Christmas.
Do you have angeloms kernel?
Click to expand...
Click to collapse
Yes I do, Would you like it ? PM me if you do
---------- Post added at 10:03 AM ---------- Previous post was at 10:01 AM ----------
treacherous_hawk said:
Thanks for the response..i have restored it already..i had custom stock rooted n stock kernel n i have tried to flash Cm10 n philz..i have tried first one from recovery mode using zip file n philz one from pc odin using .tar file (not sure if i had to use something else along with that file) both times i had issues n cant seem to get a custom kernel...can u help me get a custom kernel with step by step instructions..thanks..merry christmas...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
If you want to flash CM10, you need to flash a CM kernel before flashing the ROM, it wont install from philz kernel.
If you want to stay on TW, just download Philz latest kernel and flash it in recovery as you would a ROM, if you have stock recovery, flash it as an update.zip.
I did flash philz-cmw6-ubls4-tce-3.8.1.tar from pc odin n that is wen i got this issue of samsung logo n yellow icon n phone would shut down after that...should i have downloaded the same file as .zip n installed it from recovery mode?
Sent from my GT-N7000 using xda app-developers app
Phone shouldnt shut down regardless of anything really, are you sure its just not looping ?
The yellow triangle is normal for anything flashed through PC ODIN, unless its stock, use triangle away app to remove it once you are up and running.
Also, boot into recovery and do a factory reset, then see if your phone boots up, if not, flash a rom through recovery too.
I was trying to flash above mentioned kernel from pc odin n all it said kernel in pc odin n then pass n phone tried to auto restart after that n got first samsung screen with model number n yellow triangle n it shut down...i waited for 10 mins or so n nothing...i tried to power on the phone n still the same thing..i went to recovery mode n there was philz thing like all the options there (dont know what it is called) n restored it to previously backed up rom (i guess stock rom)..please suggest how should i flash kernel
Sent from my GT-N7000 using xda app-developers app
you restored the ROM from a backup using CWM ? the grey screen in recovery ? Are you able to boot normally now ?
Yes the grey screen n yes it is working fine now...how should i go about flashing kernel (philz)
Sent from my GT-N7000 using xda app-developers app
what rom are you on now ? check the ROM.Build number from about phone in settings and download that Philz kernel zip file on to external SD.
boot into recovery and select Apply Update from External Storage and select the zip file. thats it. Safe kernel / Rooted /CWM
This is what i have as in the screenshot...n can u plz link me to the exact kernel...i am on stock rom (i have titanium back up too n have uninstalled few stock apps too like google+ n social hub)
Sent from my GT-N7000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1901191
and you need DDLR9-INU kernel
But why couldnt i do it from pc odin...is it coz i flashed wrong kernel?
Sent from my GT-N7000 using xda app-developers app
You can flash using PC odin as well but that will increase the counter and leave a yellow triangle. The above method wont do that
If it was not wrong kernel n if it did not work with pc odin..will it work fyn from recovery mode? i mean ddlr9
Sent from my GT-N7000 using xda app-developers app
Seems you're flashing wrong kernel. You should flash kernel corresponding to the rom.
Sent from my GT-N7000 using xda premium
DDLRB or DDLR9 both will work. I just saw I pasted ddlr9.. This swiftkey changed DDLRB to DDLR9.. Damm

[Q] Not able to flash any rom..

Im on alliance jb rom and im not able to flash any rom except alliance rom. If i try to flash any rom ,after all wipes and formats its going to recovery automatically. And not even able to flash with mobile odin . Pc odin also not detecting my phone anybody plz help...!! ALL drivers and kies are installed properly. Plz help. Before few days i got yellow triangle and i removed it using triangle away apk.
Sent from my GT-N7000 using xda app-developers app
try changing the kernel to speedmod or philz and then try to flash the rom again..
I flashed using philz only bro... but when i try to flash stock rom with odin i have got pass message and after dat its showing status 7 error and going to recovery...
Sent from my GT-N7000 using xda app-developers app
Use a different kernel like cm10 to flash.

Categories

Resources