Database Develop

Size-agnostic SD Card CM7 gets stuck while installing CM7

Hi,
I am unable to post in the dev forums. hence opening this thread.
I am facing a problem installing sd card bootable CM7.
I am refering to the folowing thread: [ROM][CM7] Size-agnostic SD Card image and CM7 installer for SD Cards. with updater: http://forum.xda-developers.com/showthread.php?t=1000957
I do the following:
1. Burn the 9M image (that would unpack into ~130M disk image)
2. Put the downloaded CM nightly build on the sdcard
3. Put the card in the nook color and boot
4. The nook boots to the installation process...penguin image in a corner and starts the process
However, it gets stuck at "Writing superblocks and filesystem accouting information".
I dunno if its stuck or not......because the cursor keeps on blinking.
Its been about 30 minutes and the screen stays in the above status only.
For information, I am using 16gb Kingmax Class 10 microsd card.
Any help will be greatly appreciated.......

acme2ajax said:
Hi,
I am unable to post in the dev forums. hence opening this thread.
I am facing a problem installing sd card bootable CM7.
I am refering to the folowing thread: [ROM][CM7] Size-agnostic SD Card image and CM7 installer for SD Cards. with updater: http://forum.xda-developers.com/showthread.php?t=1000957
I do the following:
1. Burn the 9M image (that would unpack into ~130M disk image)
2. Put the downloaded CM nightly build on the sdcard
3. Put the card in the nook color and boot
4. The nook boots to the installation process...penguin image in a corner and starts the process
However, it gets stuck at "Writing superblocks and filesystem accouting information".
I dunno if its stuck or not......because the cursor keeps on blinking.
Its been about 30 minutes and the screen stays in the above status only.
For information, I am using 16gb Kingmax Class 10 microsd card.
Any help will be greatly appreciated.......
Click to expand...
Click to collapse
Ummm... did you unpack the image prior to burning it to your Sdcard?
In addition it is not proven yet to work on 16gig cards, it has only been tested up to 8gig cards.
Edit: Others now have posted that 16gig cards do not work.

And Class 10 cards are known to have issue with Nook.
Search TITLES in this Forum only for "card" for threads on sd cards.

ADude said:
And Class 10 cards are known to have issue with Nook.
Search TITLES in this Forum only for "card" for threads on sd cards.
Click to expand...
Click to collapse
Hi Adude...Thanks for the update.
Have a small doubt...
I am able to install and run successfully, the sdcard bootable CM7 bt image...which is for 2gb card.
I, then, expand that partition to the rest of the card.
So is it the size of the card thats the issue?
Can this 'size agnostic' image be modified to write only to 2 or 4 gb and then we can expand the rest. I will like to ask this question to verygreen, but i still have some posts to go till I can paste in dev forums.
Thanks again for the info.......

Bumping an old thread, since I have the exact same problem, and can't post in the proper thread as well.
But I used a 2GB class 2 card( I think, it's a generic card that you get in the bundle when you buy a phone) instead, but got the same message.
Did I harm the card in anyway? Can I use it again for this procedure? Or do I have to reflash it in some way?

BrotherZero said:
Bumping an old thread, since I have the exact same problem, and can't post in the proper thread as well.
But I used a 2GB class 2 card( I think, it's a generic card that you get in the bundle when you buy a phone) instead, but got the same message.
Did I harm the card in anyway? Can I use it again for this procedure? Or do I have to reflash it in some way?
Click to expand...
Click to collapse
Generic Class 2 card. You answered your own question, it's probably too slow.

Pity, that's the only card I have lying around.
I'm very new to this so sorry for some very basic questions. But:
1. How do I restore the card to it's original state? I tried the HPUSBFW.EXE file that is in the link above(how to flash a bootable SD guide) but it says that I need admin rights even though I already am admin. Is there any other way to restore the card?
2. I have another generic 2GB from a Sony X10 mini pro, but no idea to try that then? What kind of SD-card should I buy? Since I saw that too fast SD cards have problem as well.

I also can't post in the dev thread and am having issues with this. I'm using an 8gb sandisk class 4 microsd card. I used win32imager to burn the agnostic iso file to the card. Then I clicked exit, unmounted the drive, and plugged it back in. Now the drive shows as a 115mb drive with 107mb free. In gparted it shows as 2 partitions, 1 as 115mb and another as unallocated with the rest of the 8gb. Windows can't see the unallocated one though.
So right now I'm stuck and can't copy the nightly cm7 build onto the drive. Anyone know why it formatted it like this and what I can do to fix it?
Here's an image of what I'm talking about:

107 MB is enough
gmanpie said:
I also can't post in the dev thread and am having issues with this. I'm using an 8gb sandisk class 4 microsd card. I used win32imager to burn the agnostic iso file to the card. Then I clicked exit, unmounted the drive, and plugged it back in. Now the drive shows as a 115mb drive with 107mb free. In gparted it shows as 2 partitions, 1 as 115mb and another as unallocated with the rest of the 8gb. Windows can't see the unallocated one though.
So right now I'm stuck and can't copy the nightly cm7 build onto the drive. Anyone know why it formatted it like this and what I can do to fix it?
Here's an image of what I'm talking about:
Click to expand...
Click to collapse
The nightly CM7 -87 file has around 91 MB (here: http://download.cyanogenmod.com/get/cm_encore_full-87.zip), so you should have enough space to copy it onto your sd card. Actually, that leaves more than 15 MB available, so I suggest you also put the gapps in your SD card (here: http://android.d3xt3r01.tk/cyanogen/gapps/gapps-gb-20110307-signed.zip)
About the unallocated space, it will be partitioned by the installer accordingly once you boot the NC with your SD card in it.

Looks like it's working now. I fit the nightly build on there but couldn't fit gapps(144mb). I messed up my froyo install earlier trying to put cm7 on, so I was worried I'd be stuck with a half functional rom for my upcoming 14 hr flight :/
Ok, now for my next question. How do I install it to the emmc? I tried installing it through froyo, but when I deleted the system folder and reset it to factory settings it messed up the froyo install, so now the rom manager doesn't work.
[Edit:] going to try following this thread:
http://fineoils.blogspot.com/2011/04/nookcolor-with-cyanogen-mod-70-emmc.html

What? Gapps is ~5MB only. If you're trying to install with both at the same time verygreen's instructions say that you should flash CM7 and turn on wifi first, prior to flashing gapps.
To install to EMMC you need to burn a CWM SD card, plop the nightly zip on there, boot up with it, then install zip from SD card (select the nightly). Wipe caches/data. Remove CWM card, hit reboot option in CWM menu. You'll need to either have a fresh SD card or reformat the CWM card since CM7 on EMMC requires an SD card in. Instructions for doing this (step by step) are somewhere in General forum by eyeballer.
(Also of note: the info that 16GB cards do not work with this image is no longer true)

Could anybody use a 16Gb sd card so far? I bought one just for the nook and now I found out that its not working - damn! I can't give it back so what? pls help!

Earymgn said:
Could anybody use a 16Gb sd card so far? I bought one just for the nook and now I found out that its not working - damn! I can't give it back so what? pls help!
Click to expand...
Click to collapse
I used SanDisk 16Gb and everything worked like a charm.

stud_muffler said:
I used SanDisk 16Gb and everything worked like a charm.
Click to expand...
Click to collapse
I did too(both with issues and successfully), the only problem I had with my card is that with the size of cm7 and gapps you ahve to flash them separately, so do cm7 first, put the gapps on the boot partition then reboot into recovery.
if you don't do that you'll run out of space on the boot partition during installation.

I used verygreen's instructions to put CM& on a Sandisk 16 gig class 4. Worked the first time I tried. After CM7 I shut down, put gapps on, then rebooted into recovery.
I think the majority of the problems people are having is NOT READING the part in the verygreen instructions about using Sandisk cards.

Imbroglio said:
I used verygreen's instructions to put CM& on a Sandisk 16 gig class 4. Worked the first time I tried. After CM7 I shut down, put gapps on, then rebooted into recovery.
I think the majority of the problems people are having is NOT READING the part in the verygreen instructions about using Sandisk cards.
Click to expand...
Click to collapse
Sandisk is not required.. I've also used Transcend and Kingston. Class 4 and 6 between the three.
What is required is a card that's not crap, or works like crap in the Nook Color. An OS does a lot of small operations or uses a lot of small files, so even if the card is great at mass transfers but sucks at smaller ones, it's going to be a bad experience.
Sandisk is one way to avoid it. So if you're buying one, might as well make it Sandisk. Any others.... if it doesn't work right, try a different card. That easy.

PROBLEM: New CM7 Nightly, SD card, and EMMC

I'm new to the Nook, I've had it for just over a week and have been running CM7 stable on the sd card from day one. I decided to install the newest nightly (168 I think) bc of increased battery life.
I followed the sd card boot instructions I found on this forum and elsewhere: drag and drop new nightly onto sd card, boot into recovery, but the update wouldn't take. Took the plunge to wipe the sd card, rewrote the size agnostic boot image, put on the new nightly, nothing. What finally worked was me increasing the size of the boot partition to a gig, and then the new nightly finally installed.
Alls good right? NOPE. Now for some reason I can't access ANY files I have on my emmc! I have all my books and videos stored there bc of the limited sd card space, but now I can't access them on the new nightly like I did on the stable version. I can see the emmc files in the file manager, but when I try to open books with aldiko it says "sd card not found" or "operation could not be completed. " in settings it says that the sd card is unmounted, but when I go to mount it, my notification bar says the "sd card is damaged" and that "you may have to reformat the sd card." It also seems the sd card is recognized as "internal memory" in the storage part of the setting menu.
Help! Should I drop down to the previous nightly? Reduce the size of the boot partition? Please treat wiping the sd card again as a last resort. Thanks in advance for your help.
Sent from my DROID Pro using XDA App

My suggestion is getting a new uSD card.
What was your card capacity? 1GB?

votinh said:
My suggestion is getting a new uSD card.
What was your card capacity? 1GB?
Click to expand...
Click to collapse
Thanks for the response! This is really confusing me.
My sd card is an old 2 GB sandisk I took from an old berry I had.
But per my post above im not sure that the problem is with the sd card. It worked perfectly with cm7 stable. Im thinking maybe I messed up the installation process? Please help!
Sent from my DROID Pro using XDA App

votinh said:
My suggestion is getting a new uSD card.
What was your card capacity? 1GB?
Click to expand...
Click to collapse
Also, the actual problem here is not accessing the sd card, it is accessing books on the emmc! For some reason cm7 wont let me open books from my internal memory bc of an sd card issue. Im confused.
Again, the sd card worked perfectly in cm7 stable. AND cm7 is booting fine from the SD card! Please help folks!
Sent from my DROID Pro

SD card question

I am sure this has been covered before but I finally made a boot SD for CM7 and while it works pretty good I want to try a class 4 sandisk SD card to see if its any faster. My question is can I just copy everything from my card now to the new card and insert it in my Nook?

Raydee35 said:
I am sure this has been covered before but I finally made a boot SD for CM7 and while it works pretty good I want to try a class 4 sandisk SD card to see if its any faster. My question is can I just copy everything from my card now to the new card and insert it in my Nook?
Click to expand...
Click to collapse
Not using windows explorer. But you can get the free program win32diskimager. It can read your card and write the image to your PC. Then you can write it to your new card.
Sent from my Nook Color running ICS and Tapatalk

uSD Card Size
Hi,
I notice a lot of Rom images say will will work in a 4GB card.
Is there any problems using a larger card, like 8GB?
Thanks.
Everett1954

Yep. Use above method to put your image file on anything up to 32gig card; be sure you are using Sandisk brand, though. Small block read/write speed makes this the Nookers choice.

I just migrated from an 8gb to 16gb Sandisk card last night. I used win32diskimager to make an image of the 8gb card and then wrote that to the 16gb card. I then had to use a combination of Linux GParted and EASEUS partition manager to modify the partition sizes. I wanted to make more space available for apps instead of the 1GB (I upped it to 2GB), and expanded the CM7 partition to fill the remainder of the drive. I booted from the new card and everything seems to be working fine.

[Q] How to transfer all data in a hybrid TF card to a new card

Hi everybody:
Now I have installed hybrid CM10.1 on Nook HD in a 8G TF card. Then I would like to replace it with a new 32G card.
My question is how to transfer all the data, use the extra space and does not broke the system.
Thanks

Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thank you! It works.

leapinlar said:
Use win32diskimager to read the 8GB card to a file. The file will be 8GB. Then use win32diskimager to write that file to your new 32GB card. Then use partitioning software like Mini-Tool Partition Wizard to expand the last partition to the full size of the card.
The data on internal memory will remain and be unchanged. You should be able to boot the new SD just like it was the old one. The only difference will be your CM10SDCARD will be much larger.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here

badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
I had made an empty ".txt" file, then rename it to ".img". It may solve the problem.

badger60 said:
If I use the win32diskimager utility to read my working 8GB MicroSD Class4 card it sees nothing because using read will only accept IMG files. There must be something that I am missing here, so please fill in the missing details.
I was going to post an image I created using Snagit of what I see when I attempt what you suggested, but the forum software won't let me.
I plan on trying a clone operation with GParted from the working 8GB SD card to the 32Gb SDHC card. I will post my results here
Click to expand...
Click to collapse
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD

attempt number 25
leapinlar said:
Just type in a name. Like 8GB.img in the box. You do not have to actually create the file first, win32diskimager will create it. Then after it is done reading that write it back to your new card.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.

badger60 said:
OK. Thanks. I am giving that a shot. I am going to try it on the Sandisk 16GB class 4 card first and then on the Samsung 32 GB class 6 unit. I will post my results here.
The results were negative with theSandisk 16 GB class 4 and Samsung 32GB class 6 HDSC cards. The 32 GB card went into a loop with the appearance of the CWM graphics and back to the initial Nook image. I let it cycle perhaps 10 times. I then tried the 16 GB card and had the same results.
Click to expand...
Click to collapse
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD

leapinlar said:
Since that did not seem to work for you, another option is to make a nandroid backup with your old card to internal memory. You might also want to save your files that you have on CM10SDCARD. Then reburn the new card, let it set itself up, flash CM, the converter and gapps to it. Then before you reboot, restore the backup you made earlier. It should then be set up the same when you reboot. Then restore your CM10SDCARD files.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Click to expand...
Click to collapse
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid

badger60 said:
I do appreciate the advice, but it didn't work on either SDHC card.
Sent from my Nook HD+ running CM10.0 on Hybrid
Click to expand...
Click to collapse
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
What do you mean it didn't work? Where did it fail? During backup, during new SD creation or restore?
Edit: If somewhere along the line of your trying to fix this, you installed a new image to a card and booted with it before you did a nandroid backup of your old card, you wiped out the internal /data for the old card and it is not retrievable. If you did that, you just have to start over.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I followed your advice exactly. It appeared to work the same way that it did with the working 8GB SDHC card. I still have a nandroid backup of the old card on my PC. It just doesn't work on the two higher capacity SD cards I have. I see that I am going to have to look through the list and find the exact model of a 32 GB card that someone got working. It works fine on the Sandisk 8GB Class 4 card. The two Samsung cards (class 6) of 16 & 32 GB capacity that I own don't work. They are OK for storage use, but trying to install Android on them was a waste of time. I tried so many times. I used your tutorials and others tutorials unsuccessfully. A bum SD card is a bum SD card. I am not exactly a newbie at installing ROMs on devices . I have been doing it on my HTC Desire HD for about a year ever since HTC abandoned us and decided to not give us ICS or Jellybean for our expensive devices. I have Venom DHD on my HTC Desire HD at the moment. I am waiting for my new Samsung Galaxy s4 to arrive this week.

Nook HD+, CM10.1, no internal memory (above 2gig)

I installed Verygreen's latest sd card update (5/12) and when I go into setup and look at storage, I only see the 2 gig, not the 32 gig internal memory. I hadn't seen anyone else with this problem.

grover451 said:
I installed Verygreen's latest sd card update (5/12) and when I go into setup and look at storage, I only see the 2 gig, not the 32 gig internal memory. I hadn't seen anyone else with this problem.
Click to expand...
Click to collapse
That listing of internal memory is really the /data partition on the SD, not real internal memory. Your 32GB is listed under the other internal memory listing for internal SD.
Sent from my Nook HD+ running CM10.1 on emmc.

No internal memory (above 2 gig)
I'm looking in the settings app. Under storage, there is only listed Internal storage (1.97 gb) and SD card (12.5 GB). The sd card is 16 gb. There is no other internal memory listing nor an internal SD listing.
leapinlar said:
That listing of internal memory is really the /data partition on the SD, not real internal memory. Your 32GB is listed under the other internal memory listing for internal SD.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse

grover451 said:
I'm looking in the settings app. Under storage, there is only listed Internal storage (1.97 gb) and SD card (12.5 GB). The sd card is 16 gb. There is no other internal memory listing nor an internal SD listing.
Click to expand...
Click to collapse
It does not matter what system setting says. That was set up for running devices on internal memory, not SD. So the 1.97 is still your /data on SD, not the real internal memory. So look at sdcard with your file manager and you will see your external SD size. Look at emmc with file manager and it will show your internal media size (should be large). Since you are running on SD, /data is on SD and that confuses the CM settings readings.
Sent from my Nook HD+ running CM10.1 on emmc.

CM10.1, no internal memory (above 2 gigs)
Ok, I do see the capacity (27 g) when I'm in file manager, I just can't seem to find the directory.
grover451 said:
I'm looking in the settings app. Under storage, there is only listed Internal storage (1.97 gb) and SD card (12.5 GB). The sd card is 16 gb. There is no other internal memory listing nor an internal SD listing.
Click to expand...
Click to collapse

grover451 said:
Ok, I do see the capacity (27 g) when I'm in file manager, I just can't seem to find the directory.
Click to expand...
Click to collapse
What directory?
The issue you may be having is CM10.1 uses profiles, so they only give you a folder in internal media for your use. If you go to /int-data/media, you will see the entire media section that stock gives you. If you look there you will see a 0 folder, which is what CM10.1 lets you see as emmc for the primary user. If you add a second user, he gets a 10 folder. But you get the full capacity, just you don't see all the stock folders.
Sent from my Nook HD+ running CM10.1 on emmc.

CM10.1, no internal memory (above 2 gigs)
Ok, I finally downloaded a file manager that would let me see the /int-data folder. I went into the terminal and saw that the permission on this folder is set to --x for user.
I understand why android is setup this way, where the each user has his own folders, but there should be a default/initial user for the BN version that has read/write access to that folder.
leapinlar said:
What directory?
The issue you may be having is CM10.1 uses profiles, so they only give you a folder in internal media for your use. If you go to /int-data/media, you will see the entire media section that stock gives you. If you look there you will see a 0 folder, which is what CM10.1 lets you see as emmc for the primary user. If you add a second user, he gets a 10 folder. But you get the full capacity, just you don't see all the stock folders.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse

leapinlar said:
It does not matter what system setting says. That was set up for running devices on internal memory, not SD. So the 1.97 is still your /data on SD, not the real internal memory. So look at sdcard with your file manager and you will see your external SD size. Look at emmc with file manager and it will show your internal media size (should be large). Since you are running on SD, /data is on SD and that confuses the CM settings readings.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
How do I expand this internal memory to use the full SD card capacity? I can only load apps up to 1.97GB, but have 26GB free on the SD card.
Thanks.

mysbca said:
How do I expand this internal memory to use the full SD card capacity? I can only load apps up to 1.97GB, but have 26GB free on the SD card.
Thanks.
Click to expand...
Click to collapse
You have three options.
The easiest is to just use settings/apps to move each app to SD. That puts the app on the media part of the SD (the 26GB) and frees up a lot of the 1.97GB on the SD.
A more difficult option is to use partitioning software to increase the size of partition 3 on the SD (the 1.97).
Another easier option is to use my Hybrid system linked in my signature. It puts all the apps on real internal memory (very large, not limited to 1.97).
Sent from my Nook HD+ running CM10.1 on emmc.

Same Issue with SD patition.. can't move
leapinlar said:
You have three options.
The easiest is to just use settings/apps to move each app to SD. That puts the app on the media part of the SD (the 26GB) and frees up a lot of the 1.97GB on the SD.
A more difficult option is to use partitioning software to increase the size of partition 3 on the SD (the 1.97).
Another easier option is to use my Hybrid system linked in my signature. It puts all the apps on real internal memory (very large, not limited to 1.97).
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
--- Question: I have this same issue. I'm on 5/12 CM10.1 SD install. I have had other ROMs let you move the APPS to SD but no option in this build? I have 2gig for CM10.1 for everything. I have 12 gig free on SC CARD Partition? Ideas? Maybe I need to move to Hybrid version? Kinda weird why we have the SD partition but can't use it. Smooth so far though!

Rpimcguirk said:
--- Question: I have this same issue. I'm on 5/12 CM10.1 SD install. I have had other ROMs let you move the APPS to SD but no option in this build? I have 2gig for CM10.1 for everything. I have 12 gig free on SC CARD Partition? Ideas? Maybe I need to move to Hybrid version? Kinda weird why we have the SD partition but can't use it. Smooth so far though!
Click to expand...
Click to collapse
Hmm. I had not realized that option had not been activated in this ROM. Yes then, Hybrid is your next best option.
Sent from my Nook HD+ running CM10.1 on emmc.

Same issue with small 2gig space
grover451 said:
I installed Verygreen's latest sd card update (5/12) and when I go into setup and look at storage, I only see the 2 gig, not the 32 gig internal memory. I hadn't seen anyone else with this problem.
Click to expand...
Click to collapse
Did you find a solution? I have the same issue. I ran out of room with just 2gig...

Rpimcguirk said:
Did you find a solution? I have the same issue. I ran out of room with just 2gig...
Click to expand...
Click to collapse
The solutions are in my post a few days ago. Did you read the thread?
Sent from my Nook HD+ running CM10.1 on emmc.