My hTC HD7 is not reading the usb cable in the "red,blue,green,white screen"
is not setting "serial" or " USB" in the white border
but when i tur on my device and plug in the pc reds the usb and my phone
i have reset my phone and the phone is reset but still not read the usb cable on the "RED , Green, Blue, White" screen
sorry for my english :S
If you use the search button...
you'll find that I already answered this:
Goldcard method is the only option to downgrade this and get a fully functional bootloader.
Related
i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????
mrnicegoy said:
i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????
Click to expand...
Click to collapse
If it is reading your usb in the lower corner you are ok...just re-flash the rom.
***update? custom rom?? cid/sim unlocked??? If you answered NO to cid/sim unlocked, that NEEDS to be done first...if you have a G3 use lokiwiz or wizard service tool AFTER you reflash the stock rom from your provider. Once unlocked you can flash a custom rom. If you have a G4 phone that is a bit trickier. Read in the stickies for HOW TO's***
mrnicegoy said:
i was attempting to update my rom version on my 8125 and i guess my pc need to reset it's self while in the process of updating my phone. During my pc reboot it would not restart, due to my bios settings( my pc was to hot). It cooled off and when i started it back up my phone has
4 Colored srips (RED, GREEN, BLUE, AND WHITE)
It reads in the red strip
IPL 2.25
LOWER IN THE RED STRIP IT READS
SPL 2.25
IPL is in white letters and SPL is in yellow letters.
Also it reads RUU in the upper right corner of my screen.
when I plug in my usb cable it reads usb in the bottom left corner of my screen but nothing happens, Can someone please help me out on this?????
Click to expand...
Click to collapse
First of all download official carrier's Rom from it's website,
1. Make sure your phone is not Connected to the PC and remove the dummy card or SD/MMC card if any
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. when usb appear in the bootloader mode(tri color screen) at the bottom of the screen
5. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
If you have done the method of unlocking with lokiwiz,than go for the upgrading procedure as per the guide,you must read and correctly follow the whole method,don't skip any step,but if your phone still cid locked,then read and understand the method of unlocking,read the unlocking guide,after that continue with upgrade
I couldnt open my comm manager and decided to do a soft reset. Now, I get the ATT splash screen and then the HTC animated screen (Dutty's Series) 6.1 and nothing else. Any suggestions?
I did a hard reset, but PC does not recognize USB device. I am not stuck at the RED, GREEN, and BLUE screen...sigh - work in porgress.
What do you mean pc did not recognize phone during hard reset. The hone does not have to be hooked to the pc to hard reset. hold down both soft keys then insert stylus in the reset hole and hold until you get a white screen. then follow the prompts to wipe and reboot. all done.
Ok, I have done the hard reset, but when I try to flash the rom again to bring it back to original, the PC does not see the phone to be able to to do the ROM upgrade. So I get a time out. I am not versed well enough to do a rom upgrade from the card yet.
After the hard reset, I see a quick white screen flash..I think it says "Loading.... No File" or something to the like... then it goes back to the tri-color screen.
Put it in bootloader (instructions in wiki) - connect via your cable to your PC - it should say USB at the bottom of the tricolor PPC screen. Then flash a ROM. PM me if you have trouble.
Guilf said:
Put it in bootloader (instructions in wiki) - connect via your cable to your PC - it should say USB at the bottom of the tricolor PPC screen. Then flash a ROM. PM me if you have trouble.
Click to expand...
Click to collapse
I am in bootloader, connected the cable to the PC, it does say USB at the bootom of the tri-color screen (when I remove cable it says serial), but my PC does not see the phone as connected via USB. I believe I have a bad cable or like others my USB connector on the phone has bent pins. Sigh, phone is only 2 days old....
If your device is saying USB on the bootloader then the USB port is fine.
Its more likely that all you need to do is to restart your pc and then try again.
nisslow02 said:
I am in bootloader, connected the cable to the PC, it does say USB at the bootom of the tri-color screen (when I remove cable it says serial), but my PC does not see the phone as connected via USB. I believe I have a bad cable or like others my USB connector on the phone has bent pins. Sigh, phone is only 2 days old....
Click to expand...
Click to collapse
if it says usb then your pc is seeing your phone. however, i dont understand why u are flashing the rom again if all you did was a hard reset. the phone should still boot. we really need more information as to what you have done, not done, rom, radio etc.
Hi People
I think I have really bricked my Diamond for sure. I have read all the threads related to this problem and have tried all the possible fixes but to no avail.
Here is the problem: It is stuck on the first screen after tri colour screen showing the RGD info in red ink at the bottom right cornor. Pc wont recognize it and Active Sync 4.5 on xp is grey, not green.
I have done a few Hard resets and Soft resets. I have Olinex Hard Spl installed. Had Dutty's 1.6 working perfectly when decided to cook my own with Surface Kitchen. My first cooked rom worked fine and then I cooked another one with same base Stock rom , adding som programs and bam, this thing happened.
Please Help Help and yes I had flashed the same Diamond with every available cooked rom with no problem.
Thanks in advance. Lets not Die this beautiful Jewel.
Anyone please?
tararura said:
Anyone please?
Click to expand...
Click to collapse
Can you get it into bootloader mode??? If so, you should be fine to re-flash at that point.
I can get it to tri colour screen but it wont sync with pc ...?
tararura said:
I can get it to tri colour screen but it wont sync with pc ...?
Click to expand...
Click to collapse
So after getting to the tri-color screen and then plugging in the USB cable, you do not get "USB" at the bottom of the screen?????
Thanks for the quick reply..
Ok here is what I am doing. I perform the hard reset. Get the tri colour screen for couple of seconds and then it comes to the screen where it asks to press Volup to restore. I did it with the usb connected and usb disconnected but it wont sync. Active sync icon at the bottom on pc stays grey not green.
Pressing Volup on diamond restores, reboots and brings it back to 1st splash screen with RGD info at the bottom in red ink. aaaaah
When you are in bootscreen, connect via usb.
In the bottom off your screen you should see "usb"!
If this is what you see then flash one of the stock roms again.
After you've done this, your Diamond restarts and everything should be OK again!
Good luck!
Ok, do this:
1. Unplug the USB cable from the phone.
2. Hold down the Volume-down key and the Power button, then press (and let go of) the RESET button with your stylus.
3. When the tri-color screen appears, you can let go of the buttons.
4. The screen should say "Serial" at the bottom (in the gray color area).
5. Plug in the USB cable (The screen should change to "USB").
6. Run the RUU app to re-flash the phone.
That should get you back up and running.
To enter bootloader, turn phone off then press volume down and reset simultaneously and then power ono. If you have done this correctly it will remain there and the word "serial" appears at the bottom. Then plug in USB and the word changes to "USB" you can now flash ROM
When I flashed mine it also got stuck te first time because Windows found it necessary to install new USB driver when the Flash util wanted to connect to the HTC. The flash program jumped out leaving the diamond with the RGB screen...
But, after windows installed the new USB driver, I restarted the flash program and it finished just fine.
So if you cannot connect anymore I would try to find out if the USB driver has changed. Did you try connecting to another USB port?
Otherwise I would try to connect to another PC...
Hope it helps,
Beamer
fingers crossed
hope you unbricked it m8
@tararura
Be sure to come back and update the thread if you were successful. It may help others later if they search instead of starting another thread with a similar problem.
Holy smokes......
Its breathing again. Thank you TomInMB and Windoze9t8. Give yourselves a kiss for helping me out.
I used Windoze9t8's method and it came to the serial screen and then I flashed it with Dutty's.
So I was using hard reset method to get to bootloader screen, which was wrong.
So for everyone else, its Voldown and reset button at the same time for Bootloader screen.
Flashing is done and Active Sync recognized the Diamond.
Thanks again for everyone..... and I am sure that a few of us learnt the new trick from this thread.....
Glad to hear you're all set!!!! I sure would hate to have the feeling that my precious diamond was useless!!!!
Thats right , I already lost a lots of sleep trying to fix it last night..
Hello, i tried to upgrade my daimond (it's a 3 ita version). i use the spl software and it seems works. so after this i used RUU_Diamond_HTC_ITA_2.03.408.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe but the upgrading has been stopped to 100% for long time, so i take out the usb cable. i switched on the phone and it show only "touch diamond" label but the phone doesn't start.
so i have pushed in the same time, low volume button, enter button and reset button, and after released reset button (leving pushed the others two button) the display become 4 colors, and after fews second show this:"trigger usb host
retry Enter usb in red color)
the display show some row, like it was broken.
after fews minutes the system show the 4 colours screen, and serial label.
when i connect the usb cable,the label change from srial to usb, but the pc doesn't recognize the usb connection, so i can't do nothing for solving this problem. someone can help me please
tks robyone
Recently I have bought a used X1. One day, when the battery died, after charging it, a screen with 4 colour bars appeared (red, green, blue and white). There are also some signs on the screen:
KOVS110
SPL-0.72.01iNex
MicroP1-787
MicroP2-707.
On the bottom on the screen it says "Serial".
I cannot pass through this screen to get to use my phone as always. I tried to google this on the net but found some unrelated ROM-topics that didn't help me anyway, as I'm green as grass in these things.
Any ideas what to do? Thanks in advance for your help.
This might help. Disconnect the USB cable, remove the battery, then replace it and turn on the phone. As long as there is no problem, it should boot normally. But, the phone doesn't go into boot loader on it's own usually.
Well, that didn't help. Btw, what did you mean: "disconnect usb cable"? My phone wasn't in any way connected to a PC.
have you tried a hardreset?