Database Develop

[SOLVED][Q] Xperia T Semi or hard brick?

Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??

Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium

gregbradley said:
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks, will try. Should the battery be completely drained or full to try the PC Companion method?

Full
Sent from my LT30p using xda premium

Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?

matt4321 said:
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
Click to expand...
Click to collapse
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.

AsinineWazzo said:
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
Click to expand...
Click to collapse
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?

matt4321 said:
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
Click to expand...
Click to collapse
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.

AsinineWazzo said:
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
Click to expand...
Click to collapse
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?

matt4321 said:
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
Click to expand...
Click to collapse
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.

AsinineWazzo said:
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
Click to expand...
Click to collapse
you're getting into flashtool, you'll be fine.
that's fine, when it does that, just take the phone out and connect again.
mine does this so it's normal.
Try, putting the FTF in first, then click ok or whatever to flash, then it'll say connect the phone, so connect the phone

You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium

gregbradley said:
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145

AsinineWazzo said:
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
Click to expand...
Click to collapse
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.

gregbradley said:
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
Click to expand...
Click to collapse
Cool, I now have JB rooted thanks to you guys and the Doomlord v18 easy rooting toolkit.

AsinineWazzo said:
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Click to expand...
Click to collapse
better you give it a try to flash the stock FTF... pretty sure it will work... :good:

MalithMax said:
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
Click to expand...
Click to collapse
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium

gregbradley said:
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
so ???? does it make any big effect ?

MalithMax said:
so ???? does it make any big effect ?
Click to expand...
Click to collapse

gregbradley said:
Click to expand...
Click to collapse
haha lol.. OK :silly:

[Q] lost usb charging on mtp connection

could I have lost this after a failed attempt at getting into flashmode? And how to get it back? PCC or flashtool doesn't see the phone. USB charge works in MSC mode but still PCC and flashtool cannot see the phone. I've hit the little red button but no change. So I can't see away of flashing or updating via PCC until this is resolved.

nimekuwa said:
could I have lost this after a failed attempt at getting into flashmode? And how to get it back? PCC or flashtool doesn't see the phone. USB charge works in MSC mode but still PCC and flashtool cannot see the phone. I've hit the little red button but no change. So I can't see away of flashing or updating via PCC until this is resolved.
Click to expand...
Click to collapse
Try going into flashmode this way.
Hold volume down button, attach usb cable, keep volume down button pressed and then press and hold the power button until something happens (LED blink or vibrate) then let go of all buttons.
I had to do that on my Xperia T because getting into flashmode the normal way didn't work

gregbradley said:
Try going into flashmode this way.
Hold volume down button, attach usb cable, keep volume down button pressed and then press and hold the power button until something happens (LED blink or vibrate) then let go of all buttons.
I had to do that on my Xperia T because getting into flashmode the normal way didn't work
Click to expand...
Click to collapse
Thanks for the suggestion but it didn't appear to make any difference but something I realised is that I might have been holding the volume - fir too long. Also the green LED indicating flashmode doesn't stay on just flashes briefly. Still I was able to get PCC to see the flashmode and 'repair' it but it has made no difference. In USB mode MTP the battery is not charging hen connected to a PC and is when connected in MSC mode. I realise it is not hugely important but it would be nice to have it working the way it as two days ago PCC doesn't recognise the phone nor Media Go; maybe it is pc driver issue though I have uninstalled and reinstalled the pcc software.

Install flashtool and run the drivers.exe from the driver folder in the instalation folder of flashtool. Choose flashmode and fastboot drivers
Sent from my C6903 using xda premium

gregbradley said:
Install flashtool and run the drivers.exe from the driver folder in the instalation folder of flashtool. Choose flashmode and fastboot drivers
Sent from my C6903 using xda premium
Click to expand...
Click to collapse
Thanks, tried this and it didn't make any difference. I have same software installed at work and all works no problem so the setup on my home laptop is obviously not quite right so will do a complete wipe as best I can of software and try again.

[Q] Flash mode won't work

Hi!
My C903 cannot access flash mode. The led is flashing red and green like a second, then dissappear. Then I have to hold power+vol up to be able to start the phone. Everything else works great, fastboot and everything. I have flashed roms on this phone work flashtool before and it has worked great. I have DoomKernel and rooted stock. 290. Anyone know why the flash mode won't work. I have nandroid backup and unlocked bootloader, so I can try any suggestions.
Regards
Sent from my C6903 using XDA Premium 4 mobile app

which version of windows u are using..???....this might be drivers isssue....

You turn off your phone then when it is off you keep pushing volume down, connect to PC and the PC do not recognize the phone?

mohit378 said:
which version of windows u are using..???....this might be drivers isssue....
Click to expand...
Click to collapse
Win 7. It worked earlier. I have not changed anything, at least not in Windows. I guess it's the phone.
Sent from my C6903 using XDA Premium 4 mobile app

C_Karhu said:
Win 7. It worked earlier. I have not changed anything, at least not in Windows. I guess it's the phone.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Follow these steps....After clicking on “Flash” Button FlashTool will prepare file for flashing.Now enable USB Debugging on your phone and enable unknown sources option in your Xperia Z1 and switch it off. When prompted the notification of connecting your phone, connect it in flashmode.Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.
As soon as phone is detected by FlashTool, flashing beings and wait till it is finished.......
Where is ur fon getting error in above procedure?????

mohit378 said:
Follow these steps....After clicking on “Flash” Button FlashTool will prepare file for flashing.Now enable USB Debugging on your phone and enable unknown sources option in your Xperia Z1 and switch it off. When prompted the notification of connecting your phone, connect it in flashmode.Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.
As soon as phone is detected by FlashTool, flashing beings and wait till it is finished.......
Where is ur fon getting error in above procedure?????
Click to expand...
Click to collapse
I'm not at home right now, I will try as soon as possible.
Sent from my C6903 using XDA Premium 4 mobile app

mohit378 said:
Follow these steps....After clicking on “Flash” Button FlashTool will prepare file for flashing.Now enable USB Debugging on your phone and enable unknown sources option in your Xperia Z1 and switch it off. When prompted the notification of connecting your phone, connect it in flashmode.Press Volume down button and then insert usb in phone, you will see red and green light blink once, it means phone is connected in flashmode now.
As soon as phone is detected by FlashTool, flashing beings and wait till it is finished.......
Where is ur fon getting error in above procedure?????
Click to expand...
Click to collapse
Actually the only things that don't work is flash mode and that I can't charge phone while turned off. It boots into system and starts charging. Anything else works. When I try to flash with flashtool it says connect phone after preparing files to be flashed. The red/green led flashes, but no flash mode. Everything with the phone works, but not flash mode...
Sent from my C6903 using XDA Premium 4 mobile app

C_Karhu said:
Actually the only things that don't work is flash mode and that I can't charge phone while turned off. It boots into system and starts charging. Anything else works. When I try to flash with flashtool it says connect phone after preparing files to be flashed. The red/green led flashes, but no flash mode. Everything with the phone works, but not flash mode...
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know exactly why you want your phone in Flashmode but probably because you want flash something so if you don't mind wipe your phone try use PC Companion and repair the phone to stock, maybe is the custom rom making problems.

z1 fully Dead Hard Brick

z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?

as I said in the other thread, turn on usb debugging

if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware

NiM72NiK said:
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
Click to expand...
Click to collapse
No i can't go into Flash Mode

srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
unfortunately your phone is hard bricked as its blinking red to everything and must open your phone and hard repair it
follow the instructions on the link below
hope it helps:
http://forum.xda-developers.com/showthread.php?t=2646405
and this is the latest s1 boot .use this one
forum.xda-developers.com/attachment.php?attachmentid=2771435&d=1401467170

ok u give more details for test point and confirm we can try for z1 sir

gregbradley said:
as I said in the other thread, turn on usb debugging
Click to expand...
Click to collapse
no i cant turn usb debugging its full dead ?

srichinu said:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
Click to expand...
Click to collapse
Open Flash Tools, select FTF and wait till it says connect your phone. Now hold down volume and plug in USB to PC
If continued, be happy
If not, unplug fully, and then again hold down volume, and then a bit plug in, like image in the link below
Sorry for bad explanation
I experienced brick about five times, and this my own-made method help me
http://d-h.st/FrT

I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?

srichinu said:
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
Click to expand...
Click to collapse
I think I got what you said
By this method, maybe PC says USB not recognized, but flashing will be done, with no problem
Sent from my C6903 using Tapatalk

MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...

NiM72NiK said:
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
Click to expand...
Click to collapse
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk

SaeedFazlollahzadeh said:
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
He has to open it connect the testpoint to GND and conmect the usb cable and repair it in emergency mode...

srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
Next time do not be so fast and lazy to read instructions provided by developer of the thing you have flashed. Being fast and thinking wrong and fast sometimes produce fatal thing to the your phone. I am sure you will be no lazy next time and I am sure you will be very careful in operations with your next phone
Whats happening when you press and hold for about 5 secconds power + volumeup button? If you see vibration than you are not in hard brick! If there is no vibration but your phone flashing red all time than its hard brick! If not hard brick you can enter into fastboot mode: disconnect usb cable, press and hold power+volume up until you see vibration, than hold volume up button and in same time connect usb cable. After than you must see blue led! If no blue led than probably try to replace usb drivers by installing sony pc companion, reboot computer after that! Allso make sure comuter device manager detect your phone propertly! After that try again all steps. If this not help and you have red light all time than probably your phone is dead! Hope this help.

[SOLVED] Z3 Compact Bricked after flashing a wrong firmware

Hi guys, I'm currently having problems with my z3c. All happened by accidentally flashing the wrong firmware. After all the wrong flashing now my phone won't turn on nor it will go to "flashmode" using the sidekey method. Only way to get in the phone is by doing "Fastboot" method! Is there anyway i can fix this brick by flashing a stock firmware using fastboot method?
Thanks!

Have you tried holding power, volume up and volume down all together then release all except volume down and connect to the PC (that is ready to flash with flashmode)? Which rom did you try to flash? Normaly you should also be able to enter flashmode.
How do you try to enter flashmode?:
"Power off the Xperia phone and then press and hold Volume Down button while creating the connection between the phone and the computer."
fastboot is only ment for AOSP roms like cyanogenmod other sonys opensource stuff which all require a unlocked bootloader.

MyPictures said:
Have you tried holding power, volume up and volume down all together then release all except volume down and connect to the PC (that is ready to flash with flashmode)? Which rom did you try to flash? Normaly you should also be able to enter flashmode.
How do you try to enter flashmode?:
"Power off the Xperia phone and then press and hold Volume Down button while creating the connection between the phone and the computer."
fastboot is only ment for AOSP roms like cyanogenmod other sonys opensource stuff which all require a unlocked bootloader.
Click to expand...
Click to collapse
Yeah man, i tried everything. Up down and power. I flashed the incorrect firmware for my Z3C, then after the reboot it didn't turn on. it's weird i can't even get into flashmode using the down key and power. Whenever i try the power button it gives 3 vibrates then doesn't turn on at all. Is it fully hard bricked or will i be able to fix this?

Wait, I solved the flashmode. I can access the flashmode now. But theres a problem, I can't flash a firmware using flashtools because my USB-debugging is off and i cannot access my phone to turn it on. Is there anyway i can flash a firmware without usb-debugging? I got all the working adb drivers & etc.... just my debugging is off

Have you tried downgrading/flashing to stock fw 23. 0.A.293 (Device D5803) and then you can root from there.

Norup58 said:
Have you tried downgrading/flashing to stock fw 23. 0.A.293 (Device D5803) and then you can root from there.
Click to expand...
Click to collapse
I can't flash anything, because of USB Debugging off, Flashtool will only allow you to flash if your Debugging is on, and i can't turn on my usb debugging as my phone is bricked.
I need help to find a way to flash the stock firmware!

Adzkii said:
I can't flash anything, because of USB Debugging off, Flashtool will only allow you to flash if your Debugging is on, and i can't turn on my usb debugging as my phone is bricked.
I need help to find a way to flash the stock firmware!
Click to expand...
Click to collapse
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.

Norup58 said:
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.
Click to expand...
Click to collapse
Those are the steps i'm exactly doing, but it gives me an error saying "You must turn on USB Debugging" etc...
What version of flashtools did you use if it didn't ask you for debugging?

Adzkii said:
Those are the steps i'm exactly doing, but it gives me an error saying "You must turn on USB Debugging" etc...
What version of flashtools did you use if it didn't ask you for debugging?
Click to expand...
Click to collapse
Cant remember if I have upgraded but my present verison is 0.9.18.5 dated 2015-02-14 which is around the time I got my phone....but can see in the tut they are using 0.9.10.2 if that helps.
And if you look at #5 in tut it says: INFO - Device connected with USB debugging off

0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: omg dude this version is actually working, It's flashing without usb debugging Thanks

Adzkii said:
0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: This version is just giving errors in RED!
Click to expand...
Click to collapse
Are you flashing KK 23. 0.A.293 or LP?

Norup58 said:
Are you flashing KK 23. 0.A.293 or LP?
Click to expand...
Click to collapse
lol i got it working on this version you said. Flashed lollipop

Adzkii said:
lol i got it working on this version you said. Flashed lollipop
Click to expand...
Click to collapse
Well good for you :good::good:

Adzkii said:
0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: omg dude this version is actually working, It's flashing without usb debugging Thanks
Click to expand...
Click to collapse
Norup58 said:
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.
Click to expand...
Click to collapse
I'm having similar problems.
I'm trying to flash 23.4.A.0.546 lollipop but with latest flashboot version needs debugging on so I've downloaded and installed 0.9.10.2beta6 but when I try to flash the rom it says "please connect device in flashmode", If I disconnect the phone and then connect it again it will say "device disconnected" and then "device connected in flashmode" but nothing happens... Did you do anything in particular to bypass debugging mode needed problem?

InvisibleKnight said:
I'm having similar problems.
I'm trying to flash 23.4.A.0.546 lollipop but with latest flashboot version needs debugging on so I've downloaded and installed 0.9.10.2beta6 but when I try to flash the rom it says "please connect device in flashmode", If I disconnect the phone and then connect it again it will say "device disconnected" and then "device connected in flashmode" but nothing happens... Did you do anything in particular to bypass debugging mode needed problem?
Click to expand...
Click to collapse
I know its a pain in the bu.. but may I suggest you start from scratch. Use this tutorial: http://forum.xda-developers.com/z3-c...-keys-t3013343

Norup58 said:
I know its a pain in the bu.. but may I suggest you start from scratch. Use this tutorial: http://forum.xda-developers.com/z3-c...-keys-t3013343
Click to expand...
Click to collapse
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected

Zero-21XX said:
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected
Click to expand...
Click to collapse
Sorry about the broken link. Here's the correct one: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614

Zero-21XX said:
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected
Click to expand...
Click to collapse
It is possible your device is powered on but the screen is not working (I remember this from the Z1 root procees that required flashing a wrong firmware).
Try to force power down your phone first (press and hold power & volume up for 5 seconds) without the usb cable and reenter flashmode by holding volume down while inserting the usb cable.

kind3r said:
It is possible your device is powered on but the screen is not working (I remember this from the Z1 root procees that required flashing a wrong firmware).
Try to force power down your phone first (press and hold power & volume up for 5 seconds) without the usb cable and reenter flashmode by holding volume down while inserting the usb cable.
Click to expand...
Click to collapse
maybe but led should be turn green
when pc rebot and shows:

Zero-21XX said:
maybe but led should be turn green
when pc rebot and shows:
Click to expand...
Click to collapse
Did you install the drivers from flashtool ? For windows 8-10 you have to boot with disable driver verification or something similar. You can find a tutorial here http://forum.xda-developers.com/xpe...rs-windows-t2638680/post50100353#post50100353