Database Develop

[Q] Flash Mode Reboots while connected

Hi, so I have a stock ICS rom on my lt30a, and im trying to put the Jelly Bean update. This is the first time im using flashtool but I did my research and knew everything I needed to do. One thing keeps preventing me from flashing it to my phone. I put the phone successfully in flash mode, green light, its recognized in flashtool, excellent, then after a short period of time my phone just reboots, shows the sony logo and is charging normally. I think my computer just keeps not recognizing the phone again and again but as far as I know all the drivers are installed.
Any ideas?
Cheers

Try holding the voldown button then holding then insert usb also make sure u hasbve usb debugging turned on on your phone it you are using flasttool can u please post the output log and post it here the log gives us the reason the fail is hsappening also make sure you are running the latest version of flashtool from here http://androxyde.github.com/index.html?1350585408000 just installit on the root of your pc hdd and try again

DrSt01eR said:
Try holding the voldown button then holding then insert usb also make sure u hasbve usb debugging turned on on your phone it you are using flasttool can u please post the output log and post it here the log gives us the reason the fail is hsappening also make sure you are running the latest version of flashtool from here http://androxyde.github.com/index.html?1350585408000 just installit on the root of your pc hdd and try again
Click to expand...
Click to collapse
im holding the v down dutton as i put the usb cable in. i have the latest version installed. By output log do you mean whats right on the flashtool screen? If so thats:
04/001/2013 21:01:30 - INFO - <- This level is successfully initialized
04/001/2013 21:01:30 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
04/001/2013 21:01:30 - INFO - You can drag and drop ftf files here to start flashing them
04/001/2013 21:01:36 - INFO - Device disconnected
04/003/2013 21:03:29 - INFO - Device connected in flash mode
04/004/2013 21:04:12 - INFO - Device disconnected
04/004/2013 21:04:20 - INFO - Device connected with USB debugging off
04/004/2013 21:04:20 - INFO - For 2011 devices line, be sure you are not in MTP mode
So after about 40s it just reboots. Very annoying

tesseraction said:
im holding the v down dutton as i put the usb cable in. i have the latest version installed. By output log do you mean whats right on the flashtool screen? If so thats:
04/001/2013 21:01:30 - INFO - <- This level is successfully initialized
04/001/2013 21:01:30 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
04/001/2013 21:01:30 - INFO - You can drag and drop ftf files here to start flashing them
04/001/2013 21:01:36 - INFO - Device disconnected
04/003/2013 21:03:29 - INFO - Device connected in flash mode
04/004/2013 21:04:12 - INFO - Device disconnected
04/004/2013 21:04:20 - INFO - Device connected with USB debugging off
04/004/2013 21:04:20 - INFO - For 2011 devices line, be sure you are not in MTP mode
So after about 40s it just reboots. Very annoying
Click to expand...
Click to collapse
Ok then looks like usb debugging is turned off goto developer options and turn it on and try flashtool again also make sure to allow mock locations in that same menu
hope this helps

Huh it says in developer options that usb debugging is on. I turned on mock locations and will try again. It could be the problem is with my computer or Windows 8 not flash tool or my phone
Sent from my LT30a using xda app-developers app

tesseraction said:
Huh it says in developer options that usb debugging is on. I turned on mock locations and will try again. It could be the problem is with my computer or Windows 8 not flash tool or my phone
Sent from my LT30a using xda app-developers app
Click to expand...
Click to collapse
turn off option then turn off phone then restart and reinable usb debugging

DrSt01eR said:
turn off option then turn off phone then restart and reinable usb debugging
Click to expand...
Click to collapse
Shame, didnt work. Ill keep trying but this sucks

one last thing make sure pc companion is not running and try with usb debugging off worth ashot or try a restart of your pc i have heard of win8 issues do uhave access to a diffrent pc not win 8 or even try a diffrent usb port on ur pc

Before connecting the phone, you must prepare the ftf file. Drag and drop it into the open window of flashtool and only connect the phone when promoted to
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?

I'm nervous about doing that because one time I did it and I just assumed there was a time out, so I quickly went into flash mode and started to flash the ftf file. It said preparing then a second into actually flashing it disconnected. I thought I had bricked my phone but it booted fine.
Sent from my LT30a using xda app-developers app

tesseraction said:
I'm nervous about doing that because one time I did it and I just assumed there was a time out, so I quickly went into flash mode and started to flash the ftf file. It said preparing then a second into actually flashing it disconnected. I thought I had bricked my phone but it booted fine.
Sent from my LT30a using xda app-developers app
Click to expand...
Click to collapse
Well, thats the way to do it. You must let flashtool prepare the files and only attach the phone when it prompts you to do so.
Tell me what happens when you do it. I cant help you if I dont know if it disconnects whilst actually flashing. Please copy and paste the log from flashtool

gregbradley said:
Well, thats the way to do it. You must let flashtool prepare the files and only attach the phone when it prompts you to do so.
Tell me what happens when you do it. I cant help you if I dont know if it disconnects whilst actually flashing. Please copy and paste the log from flashtool
Click to expand...
Click to collapse
Actually one thing I just noticed that my phone is doing which as far as I know has never happened before yesterday is when I hit turn off the phone turns off then reboots normally when it should just stay off. Might this be some contributing culprite. I cant try to flash it right now but i will when i can. Thanks for the help
Edit: Also just noticed that windows drivers is having trouble downloading S1 boot drivers. I dont know if this is relevant

tesseraction said:
Actually one thing I just noticed that my phone is doing which as far as I know has never happened before yesterday is when I hit turn off the phone turns off then reboots normally when it should just stay off. Might this be some contributing culprite. I cant try to flash it right now but i will when i can. Thanks for the help
Click to expand...
Click to collapse
NP
No need to say thanks, just hit someones thanks button if you want to say thanks.
That is a seperate issue from 303 or 195 FW, I beleive it is gone on 223 and 498 FW
But what you can try is to press volume up and power button to hard reset the phone. Do it untill it vibrates once AND THEN KEEP PRESSING UNTILL IT VIBRATES 3 MORE TIMES. Then try connecting in flashmode

gregbradley said:
NP
No need to say thanks, just hit someones thanks button if you want to say thanks.
That is a seperate issue from 303 or 195 FW, I beleive it is gone on 223 and 498 FW
But what you can try is to press volume up and power button to hard reset the phone. Do it untill it vibrates once AND THEN KEEP PRESSING UNTILL IT VIBRATES 3 MORE TIMES. Then try connecting in flashmode
Click to expand...
Click to collapse
just for clarity do i keep pressing the power button or the volume up button

tesseraction said:
just for clarity do i keep pressing the power button or the volume up button
Click to expand...
Click to collapse
Volume down for flashmode

gregbradley said:
Volume down for flashmode
Click to expand...
Click to collapse
sorry, i was refering to when you said keep pressing till it vibrates 3 more times, and if its the power button do i keep holding volume up as well? I know very noob questions but i dont want to brick my device etc

I should have asked this but is there actually a time out for the flash mode?

Power and volume up together until you get three vibrations. There is no time out for flash mode
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?

gregbradley said:
Power and volume up together until you get three vibrations. There is no time out for flash mode
Sent from my LT30p xda premium app.
How do I customise the signature on xda premium app?
Click to expand...
Click to collapse
Could the problem be driver related? When im in flash mode my computer starts to look for S1 boot but doesnt have enough time for it to download the necessary driver. If so can i get this driver from somewhere else?

tesseraction said:
Could the problem be driver related? When im in flash mode my computer starts to look for S1 boot but doesnt have enough time for it to download the necessary driver. If so can i get this driver from somewhere else?
Click to expand...
Click to collapse
Goto the flashtool folder and then into the driver folder.
Run the driver setup
Tick the box for the NX, TX, flashtool and fastboot

(SOLVED) Phone disconnects from flashmode shortly after connecting.

Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?

smash_07 said:
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
Click to expand...
Click to collapse
Which version of flashtool are you using?
Sent from my C6602 using xda premium

gire.prasad said:
Which version of flashtool are you using?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm using flashtool 0.9.10.1 on Windows 8 64-bit.
EDIT: Here's a log that may help
19/002/2013 04:02:35 - INFO - <- This level is successfully initialized
19/002/2013 04:02:35 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/002/2013 04:02:35 - INFO - You can drag and drop ftf files here to start flashing them
19/002/2013 04:02:40 - INFO - Device disconnected
19/003/2013 04:03:05 - INFO - Selected C6603_Generic Uk_No Branding.ftf
19/003/2013 04:03:05 - INFO - Preparing files for flashing
19/005/2013 04:05:46 - INFO - Please connect your device into flashmode.
19/006/2013 04:06:02 - INFO - Device connected in flash mode
19/006/2013 04:06:02 - INFO - Opening device for R/W
19/006/2013 04:06:02 - INFO - Reading device information
19/006/2013 04:06:02 - INFO - Phone ready for flashmode operations.
19/006/2013 04:06:02 - INFO - Current device : C6603 - CB5A1PKLNS - 1270-6350_R8A - 1269-5309_10.1.A.1.350 - GLOBAL-LTE_10.1.A.1.350
19/006/2013 04:06:02 - INFO - Start Flashing
19/006/2013 04:06:02 - INFO - Processing loader
19/006/2013 04:06:02 - INFO - Checking header
19/006/2013 04:06:02 - INFO - Flashing data
(It doesn't get pass this step and stays at 0%)

I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.

smash_07 said:
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
Click to expand...
Click to collapse
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium

gire.prasad said:
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,

smash_07 install pc companion and go through the steps for doing a software repair it will install the drivers, as the drivers dont always install properly from the flashtool drivers folder even though it says there installed, once the s1 boot drivers have installed cancel the software repair and then open flashtool and go through the normal steps and you should find it'll start flashing the software for you, as I had problems like you until I did what I posted, also make sure there is no other sony apps running as that can stop the flash from starting.
Sent from my C6603 using xda app-developers app

smash_07 said:
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
Click to expand...
Click to collapse
Confused, it is normal that it gets disconnected after some time but it is so peculiar that it disconnects so fast! Try the solution posted by the other guy and share the solution, ll figure out another way if it fails
Ps: Before starting flashtool make sure that adb isn't running. Open task manager in windows, kill adb.exe if present and then open flashtool, follow the guide I posted earlier and when the part comes that the preparation of files is complete and when you connect your device, make sure that none of sony related apps are running (sus, pcc, emma). If they do, EXIT them first (closing them will minimise them to system tray so exit them from there). This also can be done before opening flashtool.
Sent from my C6602 using xda premium

I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.

smash_07 said:
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
Click to expand...
Click to collapse
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.

shadowboy23 said:
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
Click to expand...
Click to collapse
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.

smash_07 said:
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
Click to expand...
Click to collapse
Have you installed the driver using the flashtool? Not talking about the PC companion driver?

shadowboy23 said:
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
Click to expand...
Click to collapse
I tried both ways, with the flashtool drivers and pc companion ones.

Am confused, 30 secs is more than enough to start the flashing process, are you saying that the flashing doesn't start in 30 secs? If so, that's why I told you not to connect the phone at start and after the preparation of files is complete and when it asks you to connect, try connecting and immediately the process should begin. Even if you have connected the device before, no probs. Flashtool don't need the phone till preparation of files is complete, so you disconnect whenever befor you want, the time where it pops a popup asking you to connect the device (shows an animation) is where you should properly conmect and leave it aside. It will and it should start immediately
Sent from my C6602 using xda premium

Got the problem!
It was the firmware package that is corrupted. I tried using the UK .434 instead and it flashed with no problems or hickups. So the drivers and the phone were working well all along and the problem was where we less expected, in the firmware package.
I got the UK .350 firmware from here so there must be an error that has to be addressed with it.
Many thanks for your help

Glad you made it, cheers!
Sent from my C6602 using xda premium

I found that running the 32 bit version of Flashtool solves the problem as well.

me too but my phone is TX, using flashtool 0.9.19.8

Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!

hey i am having same problem with sony xperia m dual c2004. During flashing in flashtool 0.9.13-22 all version tried i got same error 31 (A device attached is not functioning). Problem is my device auto disconnect after 30 second and reconnect in 3 second and this process goes in loop. On usb connect green led blink once and than no light for 30 second. My device is not functioning it has bootloop issue. Tried ftf files version 15.1.A.1.5 and 15.1.A.2.5 both give same results. Is this a hardware problem or i am doing some mistake. Please give me solution i am new here. Thanks in advance...

[Q] Xperia T - won't go past sony start sreen

Hi all, I'm new here and very much a novice when it comes to phones, operating systems etc so excuse me for the noob question and complete lack of knowledge...
My Xperia T developed a microphone fault whereby nobody could hear me when I called them (incredibly faint). I had the phone repaired at a local repair shop. Almost immediately upon receiving the phone back it developed a (What appears to be very common) battery fault, whereby it would reach 80% then shut down, restart, shut down, restart......
So, before returning it to the shop for further repairs I attempted a repair using the sony software. Half way through this repair the phone shut down!!! PC lost communication and I was left with a phone that simply displayed the 'Sony' start-up logo.
I have now returned to the shop and they have installed a new battery but are unable to get communication with the phone via the sony software (so basically they dont appear to be getting any further than me!). They are saying it is beyond repair - but I find that hard to believe? Surely it is just a software issue?
Can anyone advise what can be done? I am reluctant to write this phone off - surely it can be flashed with a new operating system or whatever needs to be done to what is essentially now a 'dumb' device?

This is the way to fix the software issue, ALL YOU DATA WILL BE LOST. And i'm not responsible for anything might happen to you device . DO THIS AT YOUR OWN RISK.
Google xperia t .145 ftf file
Google flashtool for xperia
Download them
When you have installed flashtool, go to its folder, install drivers (tick the TX, flashmode and fastboot drivers boxs)
Open flashtool, click the lightning logo, select flashmode
Put the firmware file you've downloaded to the firmware folder in flashtool folder.
Connect the phone in flashmode, hold power and volume up until it vibrates 3 times, now hold the vol down, plug your phone in the computer with flashtool running, you will now able to flash the firmware.
Good luck man.

tuzmaster_v2 said:
This is the way to fix the software issue, ALL YOU DATA WILL BE LOST. And i'm not responsible for anything might happen to you device . DO THIS AT YOUR OWN RISK.
Google xperia t .145 ftf file
Google flashtool for xperia
Download them
When you have installed flashtool, go to its folder, install drivers (tick the TX, flashmode and fastboot drivers boxs)
Open flashtool, click the lightning logo, select flashmode
Put the firmware file you've downloaded to the firmware folder in flashtool folder.
Connect the phone in flashmode, hold power and volume up until it vibrates 3 times, now hold the vol down, plug your phone in the computer with flashtool running, you will now able to flash the firmware.
Good luck man.
Click to expand...
Click to collapse
Thankyou very much for your reply!! Thats what I need, a step by step muppets guide!
To be honest I couldn't care less about any data, I'm way past that stage - if I can just have the phone working again I would be a very happy man (I'm fairly desperate as you can probably tell, Im running my business from an ancient, failing HTC desire following weeks of the shop having the sony!). I can't really afford to write off a phone I paid good money for 6 months back so need to have a go myself.
I am collecting the phone today so will give that a go.....

So I had a go at the above - got the flash tool installed (Emma?) etc and managed to get the software to see the phone - unfortunately though I had neglected to mention the phone is locked to a particular network, which Emma politely informs me.
So, I have attempted to follow unlocking instructions as per the sony instructions (on their website):
But I am stuck. I was getting nothing when using the volume down button and connecting. To get the computer to see the phone I have to press and hold the power button, the red led starts blinking 3 times, repeatedly. This causes windows to recognise the phone when plugged in via usb, but I was not being asked for drivers (as per sony step 13). I found the device in device manager and uninstalled drivers in an attempt to force this. Now all that happens is the device appears in the list as 'S1 Boot Load' with a yellow exclamation mark. However I have then tried installing drivers manually from the location where I copied 'android_winusb' to, but this does not work.
To compound the issue I think the battery problem is causing the phone to cycle. when connected the green led lights up for a bit, but then goes off, then back on, then red.....repeatedly. The device only appears in device manager as 'S1 boot load' when green. This gives a very short window to try to do anything.

Wrong flashtool, download the one from the Dev section and flash a stock FTF
Sent from my C6903 using XDA Premium 4 mobile app

gregbradley said:
Wrong flashtool, download the one from the Dev section and flash a stock FTF
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh right, first mistake then. The phone will still need unlocking first though I assume?

FASTdan2 said:
Oh right, first mistake then. The phone will still need unlocking first though I assume?
Click to expand...
Click to collapse
No, flashing a stock firmware works with locked bootloader

FASTdan2 said:
Oh right, first mistake then. The phone will still need unlocking first though I assume?
Click to expand...
Click to collapse
St.Jimmy90 said:
No, flashing a stock firmware works with locked bootloader
Click to expand...
Click to collapse
You do not even need root.

FASTdan2 said:
So I had a go at the above - got the flash tool installed (Emma?) etc and managed to get the software to see the phone - unfortunately though I had neglected to mention the phone is locked to a particular network, which Emma politely informs me.
So, I have attempted to follow unlocking instructions as per the sony instructions (on their website):
But I am stuck. I was getting nothing when using the volume down button and connecting. To get the computer to see the phone I have to press and hold the power button, the red led starts blinking 3 times, repeatedly. This causes windows to recognise the phone when plugged in via usb, but I was not being asked for drivers (as per sony step 13). I found the device in device manager and uninstalled drivers in an attempt to force this. Now all that happens is the device appears in the list as 'S1 Boot Load' with a yellow exclamation mark. However I have then tried installing drivers manually from the location where I copied 'android_winusb' to, but this does not work.
To compound the issue I think the battery problem is causing the phone to cycle. when connected the green led lights up for a bit, but then goes off, then back on, then red.....repeatedly. The device only appears in device manager as 'S1 boot load' when green. This gives a very short window to try to do anything.
Click to expand...
Click to collapse
I've been dealing with a similar problem. When connected to a wall charger is your phone cycling from Green to Red and keeps doing that? Also have you installed Sony PC Companion maybe your phone will get recognized from the drivers in that install.

Same problem
Hi, I am currently having the same problem. I have tried to use flashtools and I've got all the necessary drivers (I think) but once I put hold power button and vol+ (3 vibrations), then press vol-, connect to pc via USB and I get a temporary green led, which goes after about 5 seconds, and then my phone disconnects from my computer again. I really need my phone to work Could someone out there please help with this! I would really appreciate if someone responded very soon as I would like to get this sorted as soon as possible. Flashtools gives me these messages:
22/012/2013 23:12:07 - INFO - Device disconnected
22/029/2013 23:29:07 - INFO - Device connected in flash mode
22/029/2013 23:29:18 - INFO - Device disconnected
Also one more thing i'd like to add.. Once I go into that BLU thing, it keeps on asking me what device I have, so I select Xperia T and then it gives the following messages:
22/052/2013 22:52:26 - INFO - Your phone bootloader cannot be officially unlocked
22/052/2013 22:52:26 - INFO - You can now unplug and restart your phone
Might this have something to do with it? Any suggestions would be grateful! I've been at this for hours now and need to get this sorted
Thanks to any kind person who helps fix this!

z1 fully Dead Hard Brick

z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?

as I said in the other thread, turn on usb debugging

if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware

NiM72NiK said:
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
Click to expand...
Click to collapse
No i can't go into Flash Mode

srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
unfortunately your phone is hard bricked as its blinking red to everything and must open your phone and hard repair it
follow the instructions on the link below
hope it helps:
http://forum.xda-developers.com/showthread.php?t=2646405
and this is the latest s1 boot .use this one
forum.xda-developers.com/attachment.php?attachmentid=2771435&d=1401467170

ok u give more details for test point and confirm we can try for z1 sir

gregbradley said:
as I said in the other thread, turn on usb debugging
Click to expand...
Click to collapse
no i cant turn usb debugging its full dead ?

srichinu said:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
Click to expand...
Click to collapse
Open Flash Tools, select FTF and wait till it says connect your phone. Now hold down volume and plug in USB to PC
If continued, be happy
If not, unplug fully, and then again hold down volume, and then a bit plug in, like image in the link below
Sorry for bad explanation
I experienced brick about five times, and this my own-made method help me
http://d-h.st/FrT

I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?

srichinu said:
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
Click to expand...
Click to collapse
I think I got what you said
By this method, maybe PC says USB not recognized, but flashing will be done, with no problem
Sent from my C6903 using Tapatalk

MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...

NiM72NiK said:
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
Click to expand...
Click to collapse
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk

SaeedFazlollahzadeh said:
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
He has to open it connect the testpoint to GND and conmect the usb cable and repair it in emergency mode...

srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
Next time do not be so fast and lazy to read instructions provided by developer of the thing you have flashed. Being fast and thinking wrong and fast sometimes produce fatal thing to the your phone. I am sure you will be no lazy next time and I am sure you will be very careful in operations with your next phone
Whats happening when you press and hold for about 5 secconds power + volumeup button? If you see vibration than you are not in hard brick! If there is no vibration but your phone flashing red all time than its hard brick! If not hard brick you can enter into fastboot mode: disconnect usb cable, press and hold power+volume up until you see vibration, than hold volume up button and in same time connect usb cable. After than you must see blue led! If no blue led than probably try to replace usb drivers by installing sony pc companion, reboot computer after that! Allso make sure comuter device manager detect your phone propertly! After that try again all steps. If this not help and you have red light all time than probably your phone is dead! Hope this help.

USB Debugging

Hi Team,
All of a sudden while i was browsing with my xperia sp, the screen turned blue all of a sudden.
I tried to flash a new ftf BUT i havent turned my usb debugging on .... its off.
Is there any way to turn it on?
P.S. I cant open my mobile in order to turn it on
These are the errors i get after it starts running system.in
31/027/2014 11:27:07 - ERROR - Processing of system.sin finished with errors.
31/027/2014 11:27:07 - INFO - Ending flash session
31/027/2014 11:27:07 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed 0x30000510";
Do i have to download another ftf file?

thanman01 said:
Hi Team,
All of a sudden while i was browsing with my xperia sp, the screen turned blue all of a sudden.
I tried to flash a new ftf BUT i havent turned my usb debugging on .... its off.
Is there any way to turn it on?
P.S. I cant open my mobile in order to turn it on
These are the errors i get after it starts running system.in
31/027/2014 11:27:07 - ERROR - Processing of system.sin finished with errors.
31/027/2014 11:27:07 - INFO - Ending flash session
31/027/2014 11:27:07 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Block verification failed 0x30000510";
Do i have to download another ftf file?
Click to expand...
Click to collapse
These errors usually caused by no drivers. Install drivers first just to make sure. Go to Flashtool's Intall Dir\drivers and run the installer. Choose flashmode and fastboot. Scroll down a bit and choose Common drivers for Viskan board. Finish the installation.
You also need to flash when your phone is in its power down state. Did you do that? You can press the yellow button under the back cover using a pen, long enough, and release when 3 vibrations are completed.

hi mate and thanks for your respond.
I flash the latest ftf file and my phone opened normally.
I let it recharge for 2 hours and when i tried to open it again it showed me blue screen lol .
THe funny thing is that when i finished the flashing, the phoned opened normally lmao ... how can that happen now :/
Ill try what you said to me right now, i hope it works

Ok, i tried what you said but i guess my phone has no battery.
I recharge it now but i dont know if its recharging or not :/
I cant see the icon or the red bar that indicates that the phone is recharging.
How do i know if its recharging or no?

thanman01 said:
Ok, i tried what you said but i guess my phone has no battery.
I recharge it now but i dont know if its recharging or not :/
I cant see the icon or the red bar that indicates that the phone is recharging.
How do i know if its recharging or no?
Click to expand...
Click to collapse
Lol were your phone ran out of battery before flashing or while flashing?
Well you can leave it to charge say like 12 hours and try again.

There is a lol problem, my Sony PC Companion says that my phone is model C5302 LOL !!!! And my model is C5303 wtf hahaha

thanman01 said:
There is a lol problem, my Sony PC Companion says that my phone is model C5302 LOL !!!! And my model is C5303 wtf hahaha
Click to expand...
Click to collapse
It was caused by a line in build.prop.

and how do i fix that ? :/

thanman01 said:
and how do i fix that ? :/
Click to expand...
Click to collapse
Sorry I am as well not a professional. Also, I am not using a stock ROM to identify the proper line in build.prop.
But my best bet here is that you flashed a C5302 ROM that may have somehow changed the model of your XSP. I recommend flashing a proper C5303 ftf. If you aware, you can find the stock FTFs here