Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
smash_07 said:
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
Click to expand...
Click to collapse
Which version of flashtool are you using?
Sent from my C6602 using xda premium
gire.prasad said:
Which version of flashtool are you using?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm using flashtool 0.9.10.1 on Windows 8 64-bit.
EDIT: Here's a log that may help
19/002/2013 04:02:35 - INFO - <- This level is successfully initialized
19/002/2013 04:02:35 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/002/2013 04:02:35 - INFO - You can drag and drop ftf files here to start flashing them
19/002/2013 04:02:40 - INFO - Device disconnected
19/003/2013 04:03:05 - INFO - Selected C6603_Generic Uk_No Branding.ftf
19/003/2013 04:03:05 - INFO - Preparing files for flashing
19/005/2013 04:05:46 - INFO - Please connect your device into flashmode.
19/006/2013 04:06:02 - INFO - Device connected in flash mode
19/006/2013 04:06:02 - INFO - Opening device for R/W
19/006/2013 04:06:02 - INFO - Reading device information
19/006/2013 04:06:02 - INFO - Phone ready for flashmode operations.
19/006/2013 04:06:02 - INFO - Current device : C6603 - CB5A1PKLNS - 1270-6350_R8A - 1269-5309_10.1.A.1.350 - GLOBAL-LTE_10.1.A.1.350
19/006/2013 04:06:02 - INFO - Start Flashing
19/006/2013 04:06:02 - INFO - Processing loader
19/006/2013 04:06:02 - INFO - Checking header
19/006/2013 04:06:02 - INFO - Flashing data
(It doesn't get pass this step and stays at 0%)
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
smash_07 said:
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
Click to expand...
Click to collapse
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
gire.prasad said:
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
smash_07 install pc companion and go through the steps for doing a software repair it will install the drivers, as the drivers dont always install properly from the flashtool drivers folder even though it says there installed, once the s1 boot drivers have installed cancel the software repair and then open flashtool and go through the normal steps and you should find it'll start flashing the software for you, as I had problems like you until I did what I posted, also make sure there is no other sony apps running as that can stop the flash from starting.
Sent from my C6603 using xda app-developers app
smash_07 said:
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
Click to expand...
Click to collapse
Confused, it is normal that it gets disconnected after some time but it is so peculiar that it disconnects so fast! Try the solution posted by the other guy and share the solution, ll figure out another way if it fails
Ps: Before starting flashtool make sure that adb isn't running. Open task manager in windows, kill adb.exe if present and then open flashtool, follow the guide I posted earlier and when the part comes that the preparation of files is complete and when you connect your device, make sure that none of sony related apps are running (sus, pcc, emma). If they do, EXIT them first (closing them will minimise them to system tray so exit them from there). This also can be done before opening flashtool.
Sent from my C6602 using xda premium
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
smash_07 said:
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
Click to expand...
Click to collapse
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
shadowboy23 said:
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
Click to expand...
Click to collapse
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
smash_07 said:
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
Click to expand...
Click to collapse
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
shadowboy23 said:
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
Click to expand...
Click to collapse
I tried both ways, with the flashtool drivers and pc companion ones.
Am confused, 30 secs is more than enough to start the flashing process, are you saying that the flashing doesn't start in 30 secs? If so, that's why I told you not to connect the phone at start and after the preparation of files is complete and when it asks you to connect, try connecting and immediately the process should begin. Even if you have connected the device before, no probs. Flashtool don't need the phone till preparation of files is complete, so you disconnect whenever befor you want, the time where it pops a popup asking you to connect the device (shows an animation) is where you should properly conmect and leave it aside. It will and it should start immediately
Sent from my C6602 using xda premium
Got the problem!
It was the firmware package that is corrupted. I tried using the UK .434 instead and it flashed with no problems or hickups. So the drivers and the phone were working well all along and the problem was where we less expected, in the firmware package.
I got the UK .350 firmware from here so there must be an error that has to be addressed with it.
Many thanks for your help
Glad you made it, cheers!
Sent from my C6602 using xda premium
I found that running the 32 bit version of Flashtool solves the problem as well.
me too but my phone is TX, using flashtool 0.9.19.8
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
hey i am having same problem with sony xperia m dual c2004. During flashing in flashtool 0.9.13-22 all version tried i got same error 31 (A device attached is not functioning). Problem is my device auto disconnect after 30 second and reconnect in 3 second and this process goes in loop. On usb connect green led blink once and than no light for 30 second. My device is not functioning it has bootloop issue. Tried ftf files version 15.1.A.1.5 and 15.1.A.2.5 both give same results. Is this a hardware problem or i am doing some mistake. Please give me solution i am new here. Thanks in advance...
Related
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
flash a latest version of JB,
or better yet, install PCCompanion (Just google it) and repair your phone that way
sikander3786 said:
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
Click to expand...
Click to collapse
did you try Phone Repair option in PC Companion?
Thanks for your replies.
I have also tried LT30p_9.1.A.1.140_CE_Skyfall.ftf but same result. I have also tried different versions of flashtool.
PC Companion can't detect my phone. I have tried 2 different computers and each one is stuck on install MTP drivers. I guess unless the drivers are installed, PC companion won't detect it.
I have also tried connecting the phone in flash mode but PC companion asks to restart the phone in normal mode.
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
gregbradley said:
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
Click to expand...
Click to collapse
PC companion still can't detect the phone. I have installed/re-installed all the drivers you mentioned.
As Flashtool isn't able to flash the .ftf firmware to the phone, is there any other firmware available that can be flashed via fastboot?
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
gregbradley said:
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Thanks for your suggestion.
Seems like EMMA only works with unlocked bootloaders. And my Xperia T can't be unlocked as USB debugging is off and there is no way I can turn it back on.
Further help needed, please.
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
gregbradley said:
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks, will try. Should the battery be completely drained or full to try the PC Companion method?
Full
Sent from my LT30p using xda premium
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
matt4321 said:
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
Click to expand...
Click to collapse
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
AsinineWazzo said:
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
Click to expand...
Click to collapse
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
matt4321 said:
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
Click to expand...
Click to collapse
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
AsinineWazzo said:
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
Click to expand...
Click to collapse
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
matt4321 said:
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
Click to expand...
Click to collapse
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
AsinineWazzo said:
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
Click to expand...
Click to collapse
you're getting into flashtool, you'll be fine.
that's fine, when it does that, just take the phone out and connect again.
mine does this so it's normal.
Try, putting the FTF in first, then click ok or whatever to flash, then it'll say connect the phone, so connect the phone
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
gregbradley said:
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
AsinineWazzo said:
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
Click to expand...
Click to collapse
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
gregbradley said:
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
Click to expand...
Click to collapse
Cool, I now have JB rooted thanks to you guys and the Doomlord v18 easy rooting toolkit.
AsinineWazzo said:
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Click to expand...
Click to collapse
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
MalithMax said:
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
Click to expand...
Click to collapse
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
gregbradley said:
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
so ???? does it make any big effect ?
MalithMax said:
so ???? does it make any big effect ?
Click to expand...
Click to collapse
gregbradley said:
Click to expand...
Click to collapse
haha lol.. OK :silly:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.
shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.
maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George
brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized
shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?
I don't even know how to start...
Just say, I want to try a lollipop on zr c5502.
and downloaded a fw from Xperifirm (and converted to ftf) and this tread http://forum.xda-developers.com/xperia-zr/general/stock-lollipop-android-5-0-2-build-10-6-t3114391
No error both while downloading.
But, I cant install either via flashtool
Firstly, my device wont get in flashmode green led only flash less than a second before gone. But flashtool said its connected, surely I cant flash anything.
I try fastboot blue led stay there, but flashtool dont show my device was connect in fastboot mode.
Then flashtool always show Device connected in flash mode. and I don't even connect my device to pc.
I've tried reinstall flashtool
change my usb cable and port
remove sd card from my phone
remove other usb component but mouse and keyboard
reinstall all flashtool driver.
Still problem
More data I can provide.
- Flashtool 0.9.18.5
- Xperifirm 4.5.3
- Windows 8.1 x64
- My device still working no bootloop, brick or anything wrong no button stuck or something like that
- Already bootloader unlocked
- My pc too
here a log from flashtool, while I doesn't connect my phone to my pc
23/014/2015 00:14:03 - INFO - Flashtool Version 0.9.18.5 built on 14-02-2015 15:30:00
23/014/2015 00:14:03 - INFO - Executing search strategies to find proxy selector
23/014/2015 00:14:03 - INFO - No proxy found for IE. Trying next one
23/014/2015 00:14:03 - INFO - Strategy firefox failed trying next one : No Firefox installation found
23/014/2015 00:14:03 - INFO - No proxy found for java. Trying next one
23/014/2015 00:14:32 - INFO - Syncing devices from github
23/014/2015 00:14:32 - INFO - Scanning devices folder for changes.
23/014/2015 00:14:37 - INFO - Pulling changes from github.
23/014/2015 00:14:41 - INFO - Devices sync finished.
23/014/2015 00:14:46 - INFO - Device connected in flash mode
can anyone help? thank you
Hi ZervZ,
First off, are you sure you have the proper usb drivers installed ?
also make sure to end any running adb connections by other software, ie: if you have bluestacks, genymotion or any other android emulator, make sure to close it completely and end the adb process using task manager (just to avoid any conflicts)
third, how do you boot in fastboot mode ?
it should be : completely turn off your device, connect the usb cable to the PC usb port (not the mobile yet), now press and keep holding the volume down key, while holding the volume down connect the micro usb to the device and continue holding the volume down key.
If this wasn't what you were doing, try it out and let me know what happend.
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
ZervZ said:
I'm surely a usb driver are properly installed. Every device but my phone work properly.
For flashtool drivers. Firstly, I've try installed only my device and flashmode+fastboot drivers = not working
then installed all driver that driver pack delivered = not working too. (both install with driver signing off, all green)
I'm not using or even installed any android emulator on my pc. only one program that I aware of conflict with flashtool is sony pc companion, which I'm not open it at all.
how I get in fastboot, same method as you provide but I used vol up, vol down for flashmode .(neither working with flashtool, even I've a blue led on, they still shown Ive connected in flashmode)
Now I'm try to uninstall a semc flash device driver and s1 service.
I think its a source of my problem, but problem is I can't. haha.
Might be need reinstall my windows
Edit: After I've restore my windows to the point before Ive install any drivers. Problem still persist, now its get worst, because pcc shown Ive connected sony device all the time .(same with flashtool.)
Click to expand...
Click to collapse
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
sourabhp said:
have you installed the drivers for ZR itself? when u installed Flashmode and fastboot drivers, u must have missed to tick the drivers for Lagan, Fusion3 board which are for ZR. reinstall all 3 I mentioned above and see if it works,
Also what version of flashtool are ou using? I am using 9.13 for my ZR which is recommended by the dev for first Z series phones. u may want to consider that as well
Click to expand...
Click to collapse
Well, yes I installed Lagan board on my my 1st try. Its wasn't work.
Then I just installed all of them, still wont work. Or even no driver installed from driver package. (only flashtool and connect my phone) that wont work too.
Same problem, but it can connected on 1st try, if I try to flash anything they will error and stay connected in flashmode again (Until I uninstalled a driver & reboot my pc)
As I said, flashtool 0.9.18 since its a latest version, might try 0.9.13 :good:
And.. I cant repair my phone via pcc too. Since they need to get in flashmode :crying:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
sourabhp said:
have u tried http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/ ?
Bootloader is unlocked so you can not repair using PCC
Click to expand...
Click to collapse
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
ZervZ said:
Oops. Totally forgot about UB can't use PCC haha.
Emma wont detect my device at all.
Flashtool 0.9.13 same problem persist, always shown connected in flashmode, even I doesnt connect my device
Might be a time to format my pc
Thank you guys :good:
Click to expand...
Click to collapse
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
sourabhp said:
read in above post about bluestacks, genymotion or any other android emulator,
May be thats the reason why flashtool always showing connected in flashmode, even though u have not connected the device
check and remove everything using adb.
formatting pc is last option :good:
Click to expand...
Click to collapse
Too late bro. hahaha
As I said only program I aware of interfere with flashtool are pcc. and everytime I used flashtool, I never open pcc.
Anyway after format and intstalled flashtool+driver. now its working normally.
Thank you for helping me to enjoy my lollipop :highfive:
ZervZ, I'm glad that you've solved your issue.
enjoy Lollipop
I flashed my Xperia SP with from Jellybeam to CM13 rom. I didn't create any backup, wiped clean everything including cache using twrp recovery. While the setup installed CM13 without any error but I downloaded the wrong gapps and the setup didn't accept those. So I chose to reboot the cell and since then it just stopped responding. Although it is showing the green led while plugged in via USB, it won't start in neither fastboot nor recovery mode.
I'm stuck here and have no idea what to do.
I tried installing PC companion, flashtools, SP flashtools, emma, everything. None of these detect my cell. I'm using Windows 10 (64 bit) and am at a dead end.
Any help would be appreciated.
UPDATE:
I managed to flash it with errors and now it's stuck in a SONY logo bootloop. Its starts, shows SONY logo for a while and then turns off again. Again it's not getting recognised by any flash tool, sony companion etc.
Help please.
Disable driver enforce on windows 10
Install driver fastboot and viskan driver
Use xperia flashtool, and flash stock rom ftf
hafizhlf said:
Disable driver enforce on windows 10
Install driver fastboot and viskan driver
Use xperia flashtool, and flash stock rom ftf
Click to expand...
Click to collapse
Installed the driver and flashed it with a rom but it's still stuck on the SONY logo. One more thing, It's bootloader wasn't unlocked when I messed up at the beginning. What can I do to save my phone?
goatface17 said:
Installed the driver and flashed it with a rom but it's still stuck on the SONY logo. One more thing, It's bootloader wasn't unlocked when I messed up at the beginning. What can I do to save my phone?
Click to expand...
Click to collapse
Unlock first
Use flashtool to unlock bootloader
Boot to fastboot > unlock bootloader using flashtool > enter unlock code
hafizhlf said:
Unlock first
Use flashtool to unlock bootloader
Boot to fastboot > unlock bootloader using flashtool > enter unlock code
Click to expand...
Click to collapse
Whether I try to flash it or unlock, phone boots up before the process is completed. I'm completely stumped here.
Hi! Still have the problem? I faced the same two days ago when I tried to change the on on my SP. But finally I could save the Phone by searching a bit on the net. Pls tell me if matter is still on and I try to translate the steps to english.
NagyAti said:
Hi! Still have the problem? I faced the same two days ago when I tried to change the on on my SP. But finally I could save the Phone by searching a bit on the net. Pls tell me if matter is still on and I try to translate the steps to english.
Click to expand...
Click to collapse
Yes, still stuck there. Can't flash it because phone boots mid-process and flashing aborts. Please help me out here.
goatface17 said:
Yes, still stuck there. Can't flash it because phone boots mid-process and flashing aborts. Please help me out here.
Click to expand...
Click to collapse
Hey!
Sad to hear, but maybe (I hope) this method will help you. Basically what you will get is an original Xperia SP with 4.1 android as it came from the factory.
You will need:
1. Sony Mobile Flasher by Androxyde" version 0.9.18.6. Don't know if newer version came or better. You can find it here in forums. http://forum.xda-developers.com/showthread.php?t=2489955
2. The basic ROM "12.0.A.2.254".
The method that helped me:
SP turned off. Cable not connected.
Start Sony Mobile Flasher (Flashtool) , give administrator rights.
Top left cornet click on the bolt and choose flashmode, then in firmware selector you can find and select the downloaded ROMs and kernels. Choose the official 4.1 (12.0.A.2.254). Click falsh so it starts to proceed.
Then a windows appears called "wait for flashmode".
Now. Grab your turned off SP press volume down and connect the usb to pc. Keep holding volume down button till flashtool starts to upload the system. (Hopefully it will be fast enough, and phone will not turn on. For me it was)
After flashtool is finished you will see:
09:50:53 - INFO - Flashing finished.
09:50:53 - INFO - Please unplug and start your phone
09:50:53 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
09:50:54 - INFO - Device connected in flash mode
Unplug and start the SP
If everything went as planned you have your phone back with stock 4.1 and 12.0.A.2.254 kernel.
you can find the firmwares here: https://mega.nz/#F!1xME0bZB!lGvex2Gc3cZFr3NoEFFWww!hgN3GBAC
NagyAti said:
Hey!
Sad to hear, but maybe (I hope) this method will help you. Basically what you will get is an original Xperia SP with 4.1 android as it came from the factory.
You will need:
1. Sony Mobile Flasher by Androxyde" version 0.9.18.6. Don't know if newer version came or better. You can find it here in forums. http://forum.xda-developers.com/showthread.php?t=2489955
2. The basic ROM "12.0.A.2.254".
The method that helped me:
SP turned off. Cable not connected.
Start Sony Mobile Flasher (Flashtool) , give administrator rights.
Top left cornet click on the bolt and choose flashmode, then in firmware selector you can find and select the downloaded ROMs and kernels. Choose the official 4.1 (12.0.A.2.254). Click falsh so it starts to proceed.
Then a windows appears called "wait for flashmode".
Now. Grab your turned off SP press volume down and connect the usb to pc. Keep holding volume down button till flashtool starts to upload the system. (Hopefully it will be fast enough, and phone will not turn on. For me it was)
After flashtool is finished you will see:
09:50:53 - INFO - Flashing finished.
09:50:53 - INFO - Please unplug and start your phone
09:50:53 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
09:50:54 - INFO - Device connected in flash mode
Unplug and start the SP
If everything went as planned you have your phone back with stock 4.1 and 12.0.A.2.254 kernel.
you can find the firmwares here: https://mega.nz/#F!1xME0bZB!lGvex2Gc3cZFr3NoEFFWww!hgN3GBAC
Click to expand...
Click to collapse
Thanks a lot brother. At first it didn't work when I flashed it with the latest version of Flasher. Then I installed the exact version you mentioned (0.9.18.6) and phone didn't boot during the flashing and now it's back to normal with the default 4.1 stock.
Thanks a bunch, you're a life saver for me. :highfive: