Related
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
smash_07 said:
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
Click to expand...
Click to collapse
Which version of flashtool are you using?
Sent from my C6602 using xda premium
gire.prasad said:
Which version of flashtool are you using?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm using flashtool 0.9.10.1 on Windows 8 64-bit.
EDIT: Here's a log that may help
19/002/2013 04:02:35 - INFO - <- This level is successfully initialized
19/002/2013 04:02:35 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/002/2013 04:02:35 - INFO - You can drag and drop ftf files here to start flashing them
19/002/2013 04:02:40 - INFO - Device disconnected
19/003/2013 04:03:05 - INFO - Selected C6603_Generic Uk_No Branding.ftf
19/003/2013 04:03:05 - INFO - Preparing files for flashing
19/005/2013 04:05:46 - INFO - Please connect your device into flashmode.
19/006/2013 04:06:02 - INFO - Device connected in flash mode
19/006/2013 04:06:02 - INFO - Opening device for R/W
19/006/2013 04:06:02 - INFO - Reading device information
19/006/2013 04:06:02 - INFO - Phone ready for flashmode operations.
19/006/2013 04:06:02 - INFO - Current device : C6603 - CB5A1PKLNS - 1270-6350_R8A - 1269-5309_10.1.A.1.350 - GLOBAL-LTE_10.1.A.1.350
19/006/2013 04:06:02 - INFO - Start Flashing
19/006/2013 04:06:02 - INFO - Processing loader
19/006/2013 04:06:02 - INFO - Checking header
19/006/2013 04:06:02 - INFO - Flashing data
(It doesn't get pass this step and stays at 0%)
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
smash_07 said:
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
Click to expand...
Click to collapse
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
gire.prasad said:
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
smash_07 install pc companion and go through the steps for doing a software repair it will install the drivers, as the drivers dont always install properly from the flashtool drivers folder even though it says there installed, once the s1 boot drivers have installed cancel the software repair and then open flashtool and go through the normal steps and you should find it'll start flashing the software for you, as I had problems like you until I did what I posted, also make sure there is no other sony apps running as that can stop the flash from starting.
Sent from my C6603 using xda app-developers app
smash_07 said:
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
Click to expand...
Click to collapse
Confused, it is normal that it gets disconnected after some time but it is so peculiar that it disconnects so fast! Try the solution posted by the other guy and share the solution, ll figure out another way if it fails
Ps: Before starting flashtool make sure that adb isn't running. Open task manager in windows, kill adb.exe if present and then open flashtool, follow the guide I posted earlier and when the part comes that the preparation of files is complete and when you connect your device, make sure that none of sony related apps are running (sus, pcc, emma). If they do, EXIT them first (closing them will minimise them to system tray so exit them from there). This also can be done before opening flashtool.
Sent from my C6602 using xda premium
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
smash_07 said:
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
Click to expand...
Click to collapse
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
shadowboy23 said:
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
Click to expand...
Click to collapse
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
smash_07 said:
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
Click to expand...
Click to collapse
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
shadowboy23 said:
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
Click to expand...
Click to collapse
I tried both ways, with the flashtool drivers and pc companion ones.
Am confused, 30 secs is more than enough to start the flashing process, are you saying that the flashing doesn't start in 30 secs? If so, that's why I told you not to connect the phone at start and after the preparation of files is complete and when it asks you to connect, try connecting and immediately the process should begin. Even if you have connected the device before, no probs. Flashtool don't need the phone till preparation of files is complete, so you disconnect whenever befor you want, the time where it pops a popup asking you to connect the device (shows an animation) is where you should properly conmect and leave it aside. It will and it should start immediately
Sent from my C6602 using xda premium
Got the problem!
It was the firmware package that is corrupted. I tried using the UK .434 instead and it flashed with no problems or hickups. So the drivers and the phone were working well all along and the problem was where we less expected, in the firmware package.
I got the UK .350 firmware from here so there must be an error that has to be addressed with it.
Many thanks for your help
Glad you made it, cheers!
Sent from my C6602 using xda premium
I found that running the 32 bit version of Flashtool solves the problem as well.
me too but my phone is TX, using flashtool 0.9.19.8
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
hey i am having same problem with sony xperia m dual c2004. During flashing in flashtool 0.9.13-22 all version tried i got same error 31 (A device attached is not functioning). Problem is my device auto disconnect after 30 second and reconnect in 3 second and this process goes in loop. On usb connect green led blink once and than no light for 30 second. My device is not functioning it has bootloop issue. Tried ftf files version 15.1.A.1.5 and 15.1.A.2.5 both give same results. Is this a hardware problem or i am doing some mistake. Please give me solution i am new here. Thanks in advance...
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
gregbradley said:
Hard reset it and repair using pccompanion if you have a locked bootloader.
If you have unlocked the bootloader then hard reset it and flash a stock ftf, wipe everything and exclude nothing
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks, will try. Should the battery be completely drained or full to try the PC Companion method?
Full
Sent from my LT30p using xda premium
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
matt4321 said:
Can you boot into CWM? can you recall exactly what you did? don't just copy and paste the instructions from the thread. anything out of the ordinary happen?
Click to expand...
Click to collapse
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
AsinineWazzo said:
Hi, I think it's dead I've been trying to PC Companion repair it, but it keeps disconnecting from PC Companion, I'm going to leave it to charge fully then try again. PC Companion was able to resume the download portion each time it disconnected, but now it's got to the update part it needs to start from scratch, but it looks to disconnect/reboot or something each time which interrupts the update process.
What I did, from memory, was to CWM flash .195 and kernel, on reboot it just came up with the "Sony" badge and went no further. I can't get back into CWM. I can't use flashmode in flashtool either as I can't connect the phone using the up or down volume. The only thing that seems to be working is the soft and hard reboot as I can feel the 1 or 3 vibrate happening. Once I reconnect now using PCC it connects for a short while then disconnects, nothing visible on the screen.
Click to expand...
Click to collapse
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
matt4321 said:
when you say you flashed .195, my firmware is .145, .195 is an ICS firmware, so if you've cross flashed then this is what is causing the problem. If you can get to the sony screen there should be a way to fix it!
Are you sure you can't enter flashmode? try again. turn the phone off, open flashtool, put the cable into the PC, not your phone, then hold the down button and don't let go, then connect the cable whilst still holding the down button.
EDIT: to confirm you do have the Xperia T, LT30p?
not LT30a and the TX?
Click to expand...
Click to collapse
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
AsinineWazzo said:
Ooops, typo, I was flashing to 9.1.A.1.145 from locked and rooted ICS.
When the LT30p gets enough battery it turns on, takes about 1 second to show the "Sony" label (after that is normally the "Xperia" label then the swooshing colours before the Android OS). I've left it on charge for the moment, it's showing a red LED.
Click to expand...
Click to collapse
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
matt4321 said:
you left it over night and it was still at the sony logo?
Did you try what I said about flashtool?
Click to expand...
Click to collapse
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
AsinineWazzo said:
I left it on overnight, Sony was displayed until I guess it ran out of battery. I haven't re-tried flashtool yet, charging it back up again.
Infact, I'm not sure if it got a partial update on PCC, but it doesn't look to be turning on now, not sure why. If I press the on button the red LED flashes, if I try to reset I just get the red LED flashing again.
If I connect it to flashtool, Sony is displayed, I get the following on flashtool:
22/057/2013 12:57:58 - INFO - <- This level is successfully initialized
22/057/2013 12:57:58 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
22/057/2013 12:57:58 - INFO - You can drag and drop ftf files here to start flashing them
22/058/2013 12:58:06 - INFO - Device disconnected
22/058/2013 12:58:14 - INFO - Device connected with USB debugging off
22/058/2013 12:58:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/058/2013 12:58:19 - INFO - Device disconnected
22/059/2013 12:59:14 - INFO - Device connected with USB debugging off
22/059/2013 12:59:14 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/059/2013 12:59:17 - INFO - Device disconnected
2/002/2013 13:02:58 - INFO - Selected LT30p_91.A.1.145_Orange Bond.ftf
22/002/2013 13:02:58 - INFO - Preparing files for flashing
22/003/2013 13:03:23 - INFO - Device connected with USB debugging off
22/003/2013 13:03:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
22/003/2013 13:03:27 - INFO - Device disconnected
22/003/2013 13:03:28 - INFO - Please connect your device into flashmode.
It just seems to disconnect itself almost immediately.
Click to expand...
Click to collapse
you're getting into flashtool, you'll be fine.
that's fine, when it does that, just take the phone out and connect again.
mine does this so it's normal.
Try, putting the FTF in first, then click ok or whatever to flash, then it'll say connect the phone, so connect the phone
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
gregbradley said:
You need usb debugging on.
So you will have to repair with pcccompanion before flashing with flashtool
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
AsinineWazzo said:
Holy **** sticks! I don't know how many times I tried doing the same thing over and over and over, but PCC ended up getting it's hooks in after the n'th attempt and I now have stock 9.1.A.1.145 installed! Looks like the official Sony PCC upgrade is Polish which is a bit weird, but I've got it into English anyway.
Am I chuffed?? Too bloody right I am!!
How many thanks can I give in one thread? I am very chuffed that you guys insisted that it wasn't a lost cause.
Last brave question from me... can I root the official 9.1.A.1.145
Click to expand...
Click to collapse
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
gregbradley said:
well done, glad it works
yes you can root it
search for bin4rys root method or doomlord easy root tool kit.
Click to expand...
Click to collapse
Cool, I now have JB rooted thanks to you guys and the Doomlord v18 easy rooting toolkit.
AsinineWazzo said:
Hi, I've been following XDA for some time and successfully rooted my older phones since the X10. I ran into trouble with my Xperia T though after attempting to upgrade it to 9.1.A.195. Something went awry after following (as closely as I thought I had done) the following thread http://forum.xda-developers.com/showthread.php?p=43953283
The outcome of it was that my phone is now completely unresponsive, I found another thread http://forum.xda-developers.com/showthread.php?t=2243299&page=2 which shows how to possibly recover a brick, but I'm wondering if any of you knowledgeable types can offer me any words of wisdom?
The Xperia T was just showing the initial "Sony" boot label and going no further, I left it on that screen alone to run out overnight as per the second thread, at the moment I'm guessing it's not quite run out as if I try to turn it on, I don't get anything on the screen, but the red LED flashes a few times. If I connect it to a charger now it goes back to turning on and only displaying the "Sony" boot label.
Is this Xperia a dead duck or can I fix it??
Click to expand...
Click to collapse
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
MalithMax said:
better you give it a try to flash the stock FTF... pretty sure it will work... :good:
Click to expand...
Click to collapse
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
gregbradley said:
Please read the thread before replying.
This advice has already been given and the OP has said the issue had been solved
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
so ???? does it make any big effect ?
MalithMax said:
so ???? does it make any big effect ?
Click to expand...
Click to collapse
gregbradley said:
Click to expand...
Click to collapse
haha lol.. OK :silly:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Thanks to everyone who helped problem has been solved
troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
Here is the solution:
http://forum.xda-developers.com/xperia-z/general/post-questions-help-troubleshooting-t2116920
troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
DO NO POST QUESTIONS IN GENERAL!!!!!!!!!!
btw.try another ftf
Sent from my C6603 using Tapatalk
Phone
androidfreak70 said:
DO NO POST QUESTIONS IN GENERAL!!!!!!!!!!
btw.try another ftf
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I am sorry i do not know much about phones or how to solve this problem i gues i must be doing this all wrong please can you put me through on steps on how to handle this? I am also sorry for posting where i shouldnt
troyg1 said:
I am sorry i do not know much about phones or how to solve this problem i gues i must be doing this all wrong please can you put me through on steps on how to handle this? I am also sorry for posting where i shouldnt
Click to expand...
Click to collapse
Ok no problem! all newbies post in wrong place
By the way:
Download latest flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get the FTF file for flashtool like THAT
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone repaired
Bro... All the "device not booting" problems are easy! Flashtool is your friend:angel:
Xperia wont boot
androidfreak70 said:
Ok no problem! all newbies post in wrong place
By the way:
Download latest flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get the FTF file for flashtool like THAT
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone repaired
Bro... All the "device not booting" problems are easy! Flashtool is your friend:angel:
Click to expand...
Click to collapse
I tried this and got this error
30/026/2014 08:26:02 - ERROR - Processing of loader.sin finished with errors.
30/026/2014 08:26:02 - INFO - Ending flash session
30/026/2014 08:26:02 - ERROR -
30/026/2014 08:26:02 - ERROR - Error flashing. Aborted
30/026/2014 08:26:03 - INFO - Device connected in flash mode
troyg1 said:
I tried this and got this error
30/026/2014 08:26:02 - ERROR - Processing of loader.sin finished with errors.
30/026/2014 08:26:02 - INFO - Ending flash session
30/026/2014 08:26:02 - ERROR -
30/026/2014 08:26:02 - ERROR - Error flashing. Aborted
30/026/2014 08:26:03 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
hmm
try SUS from http://www.sonymobile.com/in/tools/update-service/
download and install and you'll understand how to use it when you open it
Xperia™ Z (C6602) with tapatalk
troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
Whats your phone model 6603 or 6602
My Xperia Z wont boot
androidtweaker1 said:
Whats your phone model 6603 or 6602
Click to expand...
Click to collapse
its 6603
troyg1 said:
its 6603
Click to expand...
Click to collapse
using win 7 or 8?
My Xperia Z wont boot
androidtweaker1 said:
using win 7 or 8?
Click to expand...
Click to collapse
I am using win 8
Haven't you already fixed your problem?
This post in your duplicate topic suggests that you have. If so, then just say so instead of letting people carry on trying to help you.
Sent from my C6603 using Tapatalk
troyg1 said:
I am using win 8
Click to expand...
Click to collapse
Try this
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
as I said in the other thread, turn on usb debugging
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
NiM72NiK said:
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
Click to expand...
Click to collapse
No i can't go into Flash Mode
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
unfortunately your phone is hard bricked as its blinking red to everything and must open your phone and hard repair it
follow the instructions on the link below
hope it helps:
http://forum.xda-developers.com/showthread.php?t=2646405
and this is the latest s1 boot .use this one
forum.xda-developers.com/attachment.php?attachmentid=2771435&d=1401467170
ok u give more details for test point and confirm we can try for z1 sir
gregbradley said:
as I said in the other thread, turn on usb debugging
Click to expand...
Click to collapse
no i cant turn usb debugging its full dead ?
srichinu said:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
Click to expand...
Click to collapse
Open Flash Tools, select FTF and wait till it says connect your phone. Now hold down volume and plug in USB to PC
If continued, be happy
If not, unplug fully, and then again hold down volume, and then a bit plug in, like image in the link below
Sorry for bad explanation
I experienced brick about five times, and this my own-made method help me
http://d-h.st/FrT
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
srichinu said:
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
Click to expand...
Click to collapse
I think I got what you said
By this method, maybe PC says USB not recognized, but flashing will be done, with no problem
Sent from my C6903 using Tapatalk
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
NiM72NiK said:
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
Click to expand...
Click to collapse
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
SaeedFazlollahzadeh said:
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
He has to open it connect the testpoint to GND and conmect the usb cable and repair it in emergency mode...
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
Next time do not be so fast and lazy to read instructions provided by developer of the thing you have flashed. Being fast and thinking wrong and fast sometimes produce fatal thing to the your phone. I am sure you will be no lazy next time and I am sure you will be very careful in operations with your next phone
Whats happening when you press and hold for about 5 secconds power + volumeup button? If you see vibration than you are not in hard brick! If there is no vibration but your phone flashing red all time than its hard brick! If not hard brick you can enter into fastboot mode: disconnect usb cable, press and hold power+volume up until you see vibration, than hold volume up button and in same time connect usb cable. After than you must see blue led! If no blue led than probably try to replace usb drivers by installing sony pc companion, reboot computer after that! Allso make sure comuter device manager detect your phone propertly! After that try again all steps. If this not help and you have red light all time than probably your phone is dead! Hope this help.
Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
TMates said:
Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
Click to expand...
Click to collapse
Try to charge the phone for few hours and then flash stock rom via flashtool.
Rupant said:
Try to charge the phone for few hours and then flash stock rom via flashtool.
Click to expand...
Click to collapse
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
TMates said:
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
Click to expand...
Click to collapse
1. Download "C5303_12.1.A.1.207_AU.ftf" (Stock firmware) from here
2. Take of your back cover.
3. Open Flashtool (I expect you to have the Xperia SP drivers installed).
4. Turn off your phone by taking a pen and pressing the "off" hole and wait until it has vibrated 3x.
5. Press volume up (to get into flash mode) and connect your USB cable to the computer and wait until you get a green light.
6. Click on the flash icon in Flashtool and select flash mode. Now select the folder "Downloads" and select the "C5303_12.1.A.1.207_AU.ftf" file you have downloaded and wait 5-10 minutes.
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
TMates said:
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
Click to expand...
Click to collapse
Please click on "thanks" and what error do you get? Please tell us more.
CubeDev said:
Please click on "thanks" and what error do you get? Please tell us more.
Click to expand...
Click to collapse
still the same error stuck in repairing logo and when flashing always stuck in here my log :
23/005/2015 06:05:20 - INFO - <- This level is successfully initialized
23/005/2015 06:05:20 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/005/2015 06:05:25 - INFO - Device disconnected
23/005/2015 06:05:31 - INFO - Selected null
23/005/2015 06:05:31 - INFO - Flash canceled
23/006/2015 06:06:17 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/006/2015 06:06:17 - INFO - Preparing files for flashing
23/006/2015 06:06:31 - INFO - Please connect your device into flashmode.
23/006/2015 06:06:49 - INFO - Device connected in flash mode
23/006/2015 06:06:50 - INFO - Opening device for R/W
23/006/2015 06:06:50 - INFO - Reading device information
23/038/2015 06:38:43 - INFO - Unable to read from phone after having opened it.
23/038/2015 06:38:43 - INFO - trying to continue anyway
23/038/2015 06:38:43 - INFO - Start Flashing
23/038/2015 06:38:43 - INFO - Processing loader
23/038/2015 06:38:43 - INFO - Checking header
23/038/2015 06:38:43 - INFO - Ending flash session
23/038/2015 06:38:43 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
23/038/2015 06:38:43 - ERROR - Error flashing. Aborted
23/038/2015 06:38:49 - INFO - Device disconnected
23/052/2015 06:52:09 - INFO - Device connected with USB debugging off
23/052/2015 06:52:09 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/052/2015 06:52:14 - INFO - Device disconnected
23/004/2015 07:04:34 - INFO - Device connected with USB debugging off
23/004/2015 07:04:34 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/004/2015 07:04:39 - INFO - Device disconnected
23/050/2015 12:50:40 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/050/2015 12:50:40 - INFO - Preparing files for flashing
23/050/2015 12:50:58 - INFO - Please connect your device into flashmode.
23/051/2015 12:51:11 - INFO - Device connected in flash mode
23/051/2015 12:51:12 - INFO - Opening device for R/W
23/051/2015 12:51:12 - INFO - Reading device information
Click to expand...
Click to collapse
just stuck in there status and has several times i try results remain the same.
I've been looking at some of the threads with the same log problem remains unsuccessful.
sorry i use google translate and still bad.
Help
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
You need to install drivers again. They seem to be broken. Are you using Windows 8.1??
If yes, then disable driver signature verification and then install the drivers again.
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Kaneki Kun said:
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Click to expand...
Click to collapse
Debugging mode is only for a phone in turned on state.
When you flash the device you do it in Flashmode which has nothing to do with debugging mode on or off.
Just press the "Flash" button.
Select firmware from list.
Press OK, and go into Flashmode.
CubeDev said:
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Click to expand...
Click to collapse
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
thank you very much.
TMates said:
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
Click to expand...
Click to collapse
Please do not skip any step.
Hello? Could you report?
CubeDev said:
Hello? Could you report?
Click to expand...
Click to collapse
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
TMates said:
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
Click to expand...
Click to collapse
Hi, did you solve the problem. Because I have exactly the same problem with you.