[Q] [HELP] Dricked,tool not helping - LG Optimus 2x

Hello
So my phone is completely dead. I manage to restore the lg logo and go in the CWM revovery(with Optimus Toolkit 6 in 1 v1.1.1) ,but when I try to mount mass storage my PC say that I need to Format my disk. I tryed and it didn't help. CWM recovery is by far I got,before that I used smartflash, nvlfash(10a) and Full Brick Repair (Clean & Easy)(TOOL).
This Full Brick Repair (Clean & Easy) helped me 2 days ago when my phone stuck in lg logo,but now i just stop and say bootloader(bad data).
So what should I do if nothing works for me? Is there any why or my phone is completely bricked?
I'm sorry for bad english or if I wrote something stupid. And yes I looked on forum,google,and other forums and coludn't find anything
I hope this thread won't be deleted
Thanks in advance for help

tejMa_B said:
Hello
So my phone is completely dead. I manage to restore the lg logo and go in the CWM revovery(with Optimus Toolkit 6 in 1 v1.1.1) ,but when I try to mount mass storage my PC say that I need to Format my disk. I tryed and it didn't help. CWM recovery is by far I got,before that I used smartflash, nvlfash(10a) and Full Brick Repair (Clean & Easy)(TOOL).
This Full Brick Repair (Clean & Easy) helped me 2 days ago when my phone stuck in lg logo,but now i just stop and say bootloader(bad data).
So what should I do if nothing works for me? Is there any why or my phone is completely bricked?
I'm sorry for bad english or if I wrote something stupid. And yes I looked on forum,google,and other forums and coludn't find anything
I hope this thread won't be deleted
Thanks in advance for help
Click to expand...
Click to collapse
mate,
I am not sure if the tool kit you are mentioning about. But try to use this one which works perfectly for the O2X P990.maybe it is an issue of the CWM or bootloader if you dont have the correct ROM based on your bootloader.if you have a white LG logo then you are on the old bootloader....if you have the pink LG logo, then you are on the new boot loader.you have to choose the ROM according to the boot loader you have.the other one will not work.
ALL IN ONE TOOL KIT by Spyrosk the excellent developer
Hope this helps

Well with this tool I manage to Flash New Unlocked Bootloader with cwm recovery.
I managed to get in cwm,bet when i want the mass storage it PC say it the disk must be formated. So I tryed that couple of times and it didn't help.
So what should I do? Now I'm stuck in cwm recovery :S

tejMa_B said:
Well with this tool I manage to Flash New Unlocked Bootloader with cwm recovery.
I managed to get in cwm,bet when i want the mass storage it PC say it the disk must be formated. So I tryed that couple of times and it didn't help.
So what should I do? Now I'm stuck in cwm recovery :S
Click to expand...
Click to collapse
try this. http://forum.xda-developers.com/showthread.php?t=1975274
it unbricks your device automatic just follow the instructions
you will get on new Bootloader and cwm 6.x.x also cm10 will be your opperating system.
but if you dont bacup you data anyhow your data will be lost.

I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)

tejMa_B said:
I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)
Click to expand...
Click to collapse
Try another USB cable.
Sent from my LG-P990 using xda premium

tejMa_B said:
I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)
Click to expand...
Click to collapse
did you install the nvflash driver?

GUYS!!!! read again, he is stuck IN cwm, he wants to connect to USB mass storage... now I assume he wants to copy a rom into the external SD card, but he can't do it (obviously) because PC can't recognize the phone (but he is a noob, he doesnt know that).
Now to continue your quest you CANT connect you phone to your windows PC until you install a rom, to install a rom you need to have a file compressed in .zip in your microSD card, you need to remove your microSD card from your phone and use an USB adapter and plug it to your PC and copy a rom to your microSD card and insert it to your phone and now in CMW flash the rom (flash means intalling) and you're done , if you can't do it then download a stock rom in KDZ or FLS format, to flash your rom, but I seriously suggest you do the first recommendation, flash the rom with nvflash.
If you get stuck again don't forget to ask, some will want to help and reply :good:

Related

[Q] My legend brick!! help me please

when I turn on the phone restarts continuously at htc logo ... it turn on only when connected with cable to pc .. the phone does not see the sd and the pc does not see the phone .. I have already done hard reset but nothing.. I can not use adb and go into recovery(because the pc doesn't see the phone!) ... what should I do? please help me..
http://forum.xda-developers.com/showthread.php?t=751265
try follow that guide. It helped me
mertins said:
http://forum.xda-developers.com/showthread.php?t=751265
try follow that guide. It helped me
Click to expand...
Click to collapse
my pc don't recognize my phone..so sdk don't recognize the device..please help me..
reddev said:
my pc don't recognize my phone..so sdk don't recognize the device..please help me..
Click to expand...
Click to collapse
dudddeeeee calm down. let me start off by saying your phone is fine so relax. do you have an sdcard reader or something? basically something that will allow you to put a file on the sdcard and then back into the phone? cause all you gotta do is use this "update.zip" thingy. basically you go into recovery, press some buttons and then bam clockworkmod recovery. and then from there u just do a wipe and put on a rom that works (to provide you with more comfort, as im typing this my phone is actually bricked as well lol cause ive been waiting like 10 min for it to start since i put this new rom on. so ill just quickly fix that) let me know if u can get something to read ur sdcard and ill provide you with more info
i'm following this guide..i have problem with connecbot..when i type the commands it says no such file...but in my sd there are the files!!!...
Follow this guide since you're obviously usb bricked:
http://forum.xda-developers.com/showthread.php?t=751265
Sent from my Legend using Tapatalk
tryll1980 said:
Follow this guide since you're obviously usb bricked:
http://forum.xda-developers.com/showthread.php?t=751265
Sent from my Legend using Tapatalk
Click to expand...
Click to collapse
I resolved with this guide..thanks at all guys!!!
Help please - I tried to upgrade to CM6.1, have done it s few times i the past with great success and no idea what went wrong. believe i accidentally wipe Davik Cache. The Rom loaded, but now I'm unable to mount SD Card. I'm also unable to use ADB on WIN7 Ultimate suddenly. Have read numerous threads and google topics and have tried several solution.
1. modify google usb driver ( R8 SDk pakage)to include legend
2. various versions of HTC Sync to get the drivers.
3. using Deview to remove all HTC devices, etc
Is there anyway to mount the SD Card without ADB, then to recovery and flashing again?
PLEASE HELP

[Q] LG 2x won`t recover / Won`t boot

Hi guys
Rooted my GF`s LG X2 (NVFlash), and flashed CM7. Was working fine, until i rebooted the phone several hours later.
Now it`s stock on the Blueish LG logo.
Tried to run recovery, no help
Tried wipeing everything (Darvik, cashe, factory), no help
Tried fixing permissions, no help
Don`t got a external SD card, so cant even get any files on to the phone!
Anyway to flash a new ROM, from the computer?
Thanks
You can push a zip file to internal sdcard from computer using Adb, see howtos like this one:
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
The USB drivers are those used for smartflash, pick it up there:
http://forum.xda-developers.com/showthread.php?t=1008070
Once all this installed, in console ('cmd' on windows) you type 'adb push /path/to/your/file /mnt/sdcard.
.....
Thank you, for replying.
Tried ADB, but now the problem is, that you need to put the device in "USB Debugging", and as i said, i can`t get into the phone. Hmm, lost again
Weeeee! Finally fixed it with SmartFlash, and stock ROM!
Thx anyways

Bricked LG Optimus 2x after a nandroid backup

Hello guys!
Sorry for my english... I'm still learnig... So... After I did this tutorial http://forum.xda-developers.com/showthread.php?t=1856090
Another recovery mode version has been installed (touch). after that I did a full wipe because i wouldnt any more dual boot and I installed wiui rom. I did titanium restore backup and other configs and everything was fine. Entered in rom manager and I choose backup rom. Backup was done sucesfully. after that my lg optimus 2x died it couldnt reboot and now it cant boot, the screen is black and blank.I've tried all stuffs I could read on internet but the only thing I could was install apx drivers but when I start "flash.bat" to restore stock rom, the last line in cmd show me "waiting for bootloader to initializer"
is my phone bricked forever??
If there is a solution I would be grateful!!!
Sorry for something that was no clear to you guys!
Is not bricked search for Smartflash or Nvflash.
dorwoo said:
Is not bricked search for Smartflash or Nvflash.
Click to expand...
Click to collapse
I've already did that but I'm stocked at "waiting for bootloader to initializer" with nvflash (2x-v10b-1300166062-nvflash) here: http://www.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
and here: http://forum.xda-developers.com/showthread.php?t=1007825
With smartflash i can set .fls and .bin files but the application cant recognize LG O2X. I pull out battery, vol - / + pressed and I plugged to USB.
I've already tried this methods: smartflash, 2x-v10b-1300166062-nvflash (flash.bat), One-Click-G2x-recovery-flasher-04-28-12 (it was at O2X thread in another forum).
Thanks a lot. I have HOPE!!!!
Bricked
For those people who said the LG O2X DO NOT Bricked, Here is my thread! My LG does not turn on even the devil came here now!!! :fingers-crossed: I requested lg warranty today because no one of the methods in internet (nvflash, smartflash, one click recovery e etc etc etc) served for me. So... I cant stand LG anymore... Good bye LG!
Thanks guys for the help and the hope!!
I think u did not do it properly...i had mine in same condition and i was able to recover with smartflash.
dorwoo said:
I think u did not do it properly...i had mine in same condition and i was able to recover with smartflash.
Click to expand...
Click to collapse
Thx for reply! tell me how did u do it at steps? If LG doesnt repair my device I will try fix it by my self!
Thx a lot! In both methods any picture or word or something like upgrade s/w, show on screen of my O2X. I've tried these methods and nothing. My device was connected to the USB with nvflash all night and menssage "waiting for bootloader to initialize" persisted. Nothing happened.
Help me if u can!
I will be greatfull with you my friend.
I'm not a totaly noob! And I read as I can to learning more and more about android OS.
Again, Thanks!
I did what says here: http://android.stackexchange.com/qu...-lg-optimus-2x-p990-back-to-stock-lg-software
I had problems on my pc because of drivers i think and smartflash didnt worked but i managed to do it on other pc.U should be able to do it if u follow the steps but if u get errors with smartflash try reinstalling drivers or with other pc.

[Q] Dead USB and stuck at boot

Hi
I have a P990 with a possible dead USB. It had a CyanogenMod 9.0.0 on it when it arrived.
Trying to revive the USB, I've found ocr66 post here: http://forum.xda-developers.com/showthread.php?t=1981359
I've followed the first post's step by step instructions:
-installed R2
-restored the provided back-up in that post (mexico)
Unfortunately, now the phone is stuck loading after reboot. The horizontal spiral under the LG sign is rolling several seconds, than it's stopping and that's it.
I'm able to go into recovery mode still.
Also, I have in hand a stock firmware (kdz), but I do not know if it is of any use from cwm recovery, and of course, usb is not functioning (that's why I've followed ocr's instructions).
Any advice please ?
Thank you,
Thanks
nick61 said:
Hi
I have a P990 with a possible dead USB. It had a CyanogenMod 9.0.0 on it when it arrived.
Trying to revive the USB, I've found ocr66 post here: http://forum.xda-developers.com/showthread.php?t=1981359
I've followed the first post's step by step instructions:
-installed R2
-restored the provided back-up in that post (mexico)
Unfortunately, now the phone is stuck loading after reboot. The horizontal spiral under the LG sign is rolling several seconds, than it's stopping and that's it.
I'm able to go into recovery mode still.
Also, I have in hand a stock firmware (kdz), but I do not know if it is of any use from cwm recovery, and of course, usb is not functioning (that's why I've followed ocr's instructions).
Any advice please ?
Thank you,
Thanks
Click to expand...
Click to collapse
If it bootloops then maybe you will have to do a full wipe/format system. as you were in CM9 before, I assume that you are still in old bootloader.
you can comfirm this whilethe device is preparing to enter the old / new bootloader. The cracked new Boot loader has a pink LG logo.
As you are able to go to recovery, use the PA old boot loader....from tonyp....just download it form the dev section to the Ext SD Card. Then make a full wipe again from the recovery
flash the PA and also Kowalski Kernel. you are ready to go my friend
BTW, How do you charge if the USB port is not working....remove battery?
USB is still charging, but there is no sign of life in data communication with PC (exactly as in the ocr's mentioned post above, no question mark in device manager or anything else).
As far as I've understood until now, I am and I was on the old bootloader (LG sign is white at boot).
Maybe a little bit further details could be of help (I need to find and read your details, don't know exactly where to find tonyp bootloader and kowalsky kernel, what is PA a.s.o.)
Thank you,
nick61 said:
USB is still charging, but there is no sign of life in data communication with PC (exactly as in the ocr's mentioned post above, no question mark in device manager or anything else).
As far as I've understood until now, I am and I was on the old bootloader (LG sign is white at boot).
Maybe a little bit further details could be of help (I need to find and read your details, don't know exactly where to find tonyp bootloader and kowalsky kernel, what is PA a.s.o.)
Thank you,
Click to expand...
Click to collapse
you need to look out in the dev section....its ParanoidAndroid 2.6. Its stock Kernel is Kowalski...so no worry for you.
Did you try with a new USB cable?maybe your cable is broken...i mean the data contact....
For the data communication with PC, you need to install the USB drivers....check out on google and install it. then it will be connected. if you want to have without that, install on device and PC the MyPhone Explorer a free app...which can transmit or receive data on wifi, bluetooth or USB cable.
Hope this helps you
Of course I've changed the cable, the usb port, I've changed even the PC, but no communication, only charging, so it's not a driver problem (PC does not react in any way when connecting the phone).
Thanks, I'll try to follow your advice,
Hi again,
I've succeeded to simply recover a backup in CWM, from sdcard. But the USB problem is still there.
Let's put the problem in other words: I'm trying to access the "hidden" menu, with 1809#*990# as explained in the ocr's thread mentioned in the first post here, to try to revive the USB port.
But that hidden menu is inaccessible from CM 9.0.0.0 that I have now. So, I need to push a stock ROM, without using USB, only via sdcard. I'm assuming that in the stock rom the hidden menu is accessible.
I'm on the old bootloader. I need a zip packed stock GB ROM.
I've found an ICS 3.0A for CWM install but it does not work, most probably because of the old bootloader I have.
So, could someone post a link with a zipped GB stock ROM that can be installed with CWM directly from SDcard ?
Thank you,
Here's one I found in the development section -
http://forum.xda-developers.com/showthread.php?p=31600327
The download links seem to be active still
Sent from my LG-P990 using Tapatalk 2
Yep,
It perfectly did the trick, thanks kingvortex, and everyone who helped me.
Unfortunately, the USB is hardware broken, I was able to access the hidden menu and the tests just confirmed this trouble. But at least the phone is usable.
If anyone knows some other GB stock firmware (2.3.6 ?), but ready to be installed only via sdcard and CWM, it would be very usefull, because it seems that 2.3.4 has a known bug that prevent apps installation from a newer version of the market (google play) - I've read about this bug here on xda.
I would prefer gingerbread because:
- the phone has the old bootloader
- the usb is broken
- it seems that GB is faster than ics on p990
Thanks,

[HELP] nokia x2ds rm-1030 dead, flash 2.1.0.12 complete, flash 2.1.0.13 stuck

Hello ned help..
rm-1030 flashing rom 2.1.0.12 complete Done
i have two version
RM1013_059V788_2.1.0.12 and
RM1013_059V786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059V78 always stuck at rm1013_2.1.0.13_user_NON-HLOS.bin
and shown error dialog "failed using firehouse protocol"
need help..
ive try to redownload ROM.. but keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
maybe the firmware you downloaded is corrupted.. where did you downloaded your firmware files? I use navifirm+ but yesterday I'm trying to redownload a rom but navifirm+ seems to be not working any more..
thaks for replay,
iv downloaded from Package Majnager .. and from this seidea.com/tag/rm-1013-2-1-0-13/
its still blank screen and just detect "emerency connecivity
first download nokia-x2-tools.v.1.2.en.exe, from the tool install drivers.. then go to your "C:\ProgramData\Nokia\Packages\Products\RM-XXX" and delete all files or move it somewhere if you don't want to delete.. and replace everything with the files that you downloaded.. and run "Lunch Nokia Care Suite" as administrator.. and flash your firmware..
thaks...
I thinks its hardware problem.. coz i have 5 different firmware and already used maximal method
change folder.. remove.. redownload.. and anythink
and my phone cant detect fastboot or recovery
btw thaks
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
I have exactly same problem havent found solution yet.
I have same problem too
arisjb said:
hello ned help..
Rm-1030 flashing rom 2.1.0.12 complete done
i have two version
rm1013_059v788_2.1.0.12 and
rm1013_059v786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059v78 always stuck at rm1013_2.1.0.13_user_non-hlos.bin
and shown error dialog "failed using firehouse protocol"
need help..
Ive try to redownload rom.. But keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
Click to expand...
Click to collapse
Remove battery from device atleast 1min
Insert battery
Start device in bootloop and if not start only connect to PC
Start Nokia care suite >product software > open product> select device and flash
jepr0x1011 said:
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
Click to expand...
Click to collapse
My Nokia X2 had also give completely dead. I tried to Flash stock ROM in it via Nokia care suite and which I've even done previously however this time my phone had gone completely blank and does not even go to recovery mode. It has gone completely unresponsive. Please help me on this.

Categories

Resources