Database Develop

My G note hangs (stuck) with all Jelly bean help please

Hello
i need help...my galaxy note is hanging again and again when i install ultimate jelly bean or rocket rom v3 JB....now m back on old ics rocketrom v12...sometime b4 i thought its bcoz of my memory card so i removed that for some times bt it still hangs...my mobile screen stucks again and again...somebody help me to install working JB for me...thanks..

know it first.
daman8331 said:
Hello
i need help...my galaxy note is hanging again and again when i install ultimate jelly bean or rocket rom v3 JB....now m back on old ics rocketrom v12...sometime b4 i thought its bcoz of my memory card so i removed that for some times bt it still hangs...my mobile screen stucks again and again...somebody help me to install working JB for me...thanks..
Click to expand...
Click to collapse
Plz watch the video in ultimate rom on.
How to prepare yr phone before flashing any rom.
Do all the wipes necessary.
Be on an safe kernel in ics first.
Then follow as in the video by hammdog.
You can surely flash n run JB without any problems.

shabhrish said:
Plz watch the video in ultimate rom on.
How to prepare yr phone before flashing any rom.
Do all the wipes necessary.
Be on an safe kernel in ics first.
Then follow as in the video by hammdog.
You can surely flash n run JB without any problems.
Click to expand...
Click to collapse
i have done everything....it jst freeze after sometime...i have tried rocket rom and ulitmate jelly bean both...

daman8331 said:
i have done everything....it jst freeze after sometime...i have tried rocket rom and ulitmate jelly bean both...
Click to expand...
Click to collapse
Ok in that case ve u tried Re-flashing the same rom from recovery with or without wipes?

shabhrish said:
Ok in that case ve u tried Re-flashing the same rom from recovery with or without wipes?
Click to expand...
Click to collapse
bro i did full wipe b4 flash new rom...i can use rocketrom ics without any prob bt when i install Jb it jst freeze after some mins...i jst have to restart it again and again

My note like your note but i flash the xxlsa by mobile odin and the problem is solved and there is no hang .
Sent from my GT-N7000 using xda premium

That is bound to happen with all the JB leaks. I have given up on them, none is stable enough to be used as your everyday rom. They work decently for a few days but then sods start to happen and all of a sudden the phone won't boot anymore. Sometimes clearing cache and dalvik cache helps and sometimes it doesn't. Seriously, I recommend going back to ICS and wait for the official release.
Sent from my revived Galaxy Note

http://forum.xda-developers.com/showthread.php?p=34961908
I did as described here and I am very okay now. Repartition with pit file wiped it clean enough it seems.

altae said:
That is bound to happen with all the JB leaks. I have given up on them, none is stable enough to be used as your everyday rom. They work decently for a few days but then sods start to happen and all of a sudden the phone won't boot anymore. Sometimes clearing cache and dalvik cache helps and sometimes it doesn't. Seriously, I recommend going back to ICS and wait for the official release.
Sent from my revived Galaxy Note
Click to expand...
Click to collapse
Get a stock jb rom they seems to be more stable then the ones that are tweaked all around I'm running a stock rom with just some build.prop tweaks and some minor theming I have done and it has been my daily rom since xxlsc was posted with zero problems well at least for what I use anyways no sods or random reboots or freezes or FCS and I also modded the service.jar file for v6 supercharger for 100% supercharge
Sent from my GT-N7000 using XDA Premium HD app

I had same problem finally I flashed JB odin version (XXLSA)
You may try this one,,
HTML:
http://forum.xda-developers.com/showthread.php?t=2018978
Before flash through do the ful wipe and format cache/system/preload (make sure you are on a safe kernel)
Let me know whether it works...

thank u guys but now i m back to rocketrom ics v12....its working quite fine stable and fast....
anyways thanks for helping me guys....

ttibbetts83 said:
Get a stock jb rom they seems to be more stable then the ones that are tweaked all around I'm running a stock rom with just some build.prop tweaks and some minor theming I have done and it has been my daily rom since xxlsc was posted with zero problems well at least for what I use anyways no sods or random reboots or freezes or FCS and I also modded the service.jar file for v6 supercharger for 100% supercharge
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
That's exactly what I did. The last rom I ran was stock XXSLA released by sammobile. It worked for 3 days before the sods started to happen again and eventually I encountered the mandatory bootloop. No chance, I'm not going to touch those leaks again. On one hand constantly having to deal with sods and bootloops is annoying. On the other hand I'd like to mention that our phones are not built to be wiped every other day. Doing so to remedy sods and bootloops might as well provoke a brick even if the device is not affected by the brickbug (as mine thanks to the new mainboard I got) and/ or is running on a safe kernel.
Sent from my revived Galaxy Note

A system format my be the key to this jb ROMs running smooth
Sent from my GT-N7000 using XDA Premium HD app

[Q] Jelly Bean 4.1.2 hangs a lot!

Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!

Одг: [Q] Jelly Bean 4.1.2 hangs a lot!
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
Use latest xxlq4 version, and some of custom kernel. I do not have lag at all with it.
Sent from Galaxy S Advance

Mine hangs a lot tok when i open the YouTube app in the first video, i must be tapping the first 10 seconds the screen to respond and if i have luck it doesn't hangs, and if it does, for me there is no other way out than a hard reset...
Sent from my GT-I9070 using xda app-developers app

even my phone used to lag a lot.
just root ur phone, use a custom kernel like cocre or thunderzap.
i use cocore 3.3 and in no frills, set governor to pegasusq and i/o to sio.
it will work smoothly. i play gta vice city just fine
---------- Post added at 10:48 AM ---------- Previous post was at 10:44 AM ----------
camtista said:
Hey guys
I am running JB 4.1.2 on my Galaxy S Advance. First I was really pleased about the new functions, the additional speed and the new the design.
( I was running 2.3.6)
But now my mobile hangs a lot, if I'm watching videos, playing music or if I just go on facebook.
I've used the instructions of this video and I've done exactly the same as showed. /watch?v=2W2NVfGJ0Cc
Do you have any ideas, how I can speed up my phone?
Maybe with an other kernel, an other ROM or something like that.
Greetings from Switzerland!
Click to expand...
Click to collapse
i am using stock rom XXLQ4 with cocore 3.3 kernel and no frills config: governor-pegasusq and i/o-sio
still if u feel the phone lags which i dont think it will, u can enable forced gpu rendering in developer options, although u may experience screen flickering.

try Thunderzap 4.1 kernel and wipe cache/dalvik. See if there's any difference. It worked for me.

my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)

mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.

shut_down said:
It has been a long time since we have custom kernels and roms. Use CoCore E kernel and some custom ROM. Or some CM ROM.
Click to expand...
Click to collapse
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off

mjz2cool said:
i'm using cocore 8.8, and deodexed stock lqe, and i added some mods like ink effect, aosp lockscreen toggle and crt-off
Click to expand...
Click to collapse
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954

shut_down said:
Debloat, remove apps from system that is not of use. Like that Samsung Chat etc...
http://forum.xda-developers.com/showthread.php?t=2200954
Click to expand...
Click to collapse
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.

mjz2cool said:
already done, when i deodexed it i made a flashable zip that removes all files from /preload/symlink/system/app, /system/app and /system/framework, and then copies all the deodexed files to these locations, and roots it and adds dsp manager.
Click to expand...
Click to collapse
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.

shut_down said:
If that hangs to you, try CM10.1 with PegasusQ/SIO gevernor/scheduler.
Click to expand...
Click to collapse
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
edit- the battery is fine, it's almost new, and in stock rom i can get about 1 and-a-half day with wifi almost constantly on

mjz2cool said:
does cm 10.1 have a better battery life than cm 10.2? cause in cm 10.2 it was quite terrible, only about half a day with wifi off (i never use data connection, always turn that of ) and in standby most of the time.
Click to expand...
Click to collapse
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.

shut_down said:
Yeeees. I think similar to stock. I am on CM10.2 based ROM now, and CM10.1 was better for me.
Click to expand...
Click to collapse
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based

mjz2cool said:
i think i'm gonna try that one for a day or so, see if the battery life is indeed better than cm 10.2.
only downside other than that is the high vibration strength, is there anyway to lower that? (only for buttons and certain onscreen things)
and is there much difference in battery life between 10.2 and 10.1?
edit- just installed it, but wifi always takes about 2 minutes to turn on, so i'm back to stock based
Click to expand...
Click to collapse
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.

shut_down said:
I did not have that problem on 10.1. Did you use 1117 version? Use 1117+phone.apk from newest one.
Click to expand...
Click to collapse
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)

mjz2cool said:
where can i find 1117? the only one i can find is 1116 (except for the 0xxx ones in the archive)
Click to expand...
Click to collapse
http://d-h.st/168

R_a_z_v_a_n said:
http://d-h.st/168
Click to expand...
Click to collapse
so that one hasn't got the wifi problem? that would be great thanks for the link
and if so, is it also fixed in 10.2? that would be even better
edit- still the same problem, most of the time it takes around 2 minutes to turn on wifi, and sometimes it doesn't even turn on and i have to reboot.

JB 4.1.2
mjz2cool said:
my phone also hangs quite a lot, a few times a day when i want to unlock my phone it just shows the last used app (be it the launcher or any other app) and doesn't respond except for the power button. when i press the power button the screen locks, but when pressing again it's still frozen.
(i know, it's a bit of an old thread, but maybe someone will reply)
Click to expand...
Click to collapse
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck

camtista said:
If you haven't done yet, root your phone. Then flash a custom recovery. CWM or TWRP. Then flash a custom kernel or a custom rom.
I think the Jelly Bean stock-rom isn't recommended for this phone. It didn't use to lag, when I used Gingerbread 2.3. After flashing Jelly Bean it hanged a lot!
Now, i rooted it, installed CWM and the custom rom Pure Vanilla. It doesnt lag anymore!
Greetings and nice luck
Click to expand...
Click to collapse
it always froze even when using a custom kernel, but now i'm using cm11 it's not freezing anymore

[Q] Best JB update for I9070

What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance

iso188 said:
What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance
Click to expand...
Click to collapse
If you want Samsung's original JB you can try I9070ITVLQ3 (with I9070XXLQG baseband), but you have to root it, debloat (ie eliminate unnecessary apps, you can find a guide to do it and root on xda) and change kernel (for stock rom I prefer CoCore). For now the best is CM10.1 by Team Canjica, you can also try CM10.2 by the same team.

o no, no -LightJBv1-2 is very stable, battery ok, games ok,

Can anybody give me link for i9070tvlq3.. and can we flash it in cwm?? Or we have to use odin..
Sent from my GT-I9070 using xda premium

krunal borse said:
Can anybody give me link for i9070tvlq3.. and can we flash it in cwm?? Or we have to use odin..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Firmwares are only flashing with Odin, so you can't use CWM. On other thread I answered you to look here http://samsung-updates.com/

Thanks for that n i also wanted to ask that i have i9070ddlup8 stock rom how shud i deodex it i want the crt off effect to work and i saw it in some thread that it needs a de odexed rom so can anybody tell me how to de odex it..
If it needs any zip then plz specify that zip too..
Please.....
Sent from my GT-I9070 using xda premium

krunal borse said:
Thanks for that n i also wanted to ask that i have i9070ddlup8 stock rom how shud i deodex it i want the crt off effect to work and i saw it in some thread that it needs a de odexed rom so can anybody tell me how to de odex it..
If it needs any zip then plz specify that zip too..
Please.....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Is it ddulp8, not ddlup8?
Download this: http://d-h.st/GxG
You need custom recovery. Do you have CoCore kernel installed? If you do, go to recovery (power on phone with VolumUP+Home+Power buttons hold at the same time untill you fill some vibration). There go to Install from SD card, if you put that zip in internal, and install it. Do the same with that crt mod.
More explanation - what you need before using mod:
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can install CRT off MOD by installing its zip from recovery.

light jb is best stock based rom.
Sent from my GT-I9070 using XDA Premium 4 mobile app

New update
What about I9070XXLQL?
Did anyone try it?

iso188 said:
What about I9070XXLQL?
Did anyone try it?
Click to expand...
Click to collapse
I tried, its the smoothest jellybean firmware in my opinion

iso188 said:
What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance
Click to expand...
Click to collapse
I use the ROM LP8 and I think quite soft

JB Versus GB
[email protected] said:
I tried, its the smoothest jellybean firmware in my opinion
Click to expand...
Click to collapse
Is it smoother and faster than Gingerbread? If not, Is it slower or just the same?

iso188 said:
Is it smoother and faster than Gingerbread? If not, Is it slower or just the same?
Click to expand...
Click to collapse
It would be more lag than on gb i guess, but gingerbread is kinda old right now isnt it, i think it's time for u to upgrade too.Well it is ur choice

Best jb for our device is Philippine jellybean.?
[ sent from my mind ]

my jb baseband is dxamd1 from phil coz im from phil too... and to me it looks stable enough with cm 10.2 11-18

Thanks
Thank you guys. I appreciate your help.
I think I will give I9070XXLQL a try

Another question
[email protected] said:
It would be more lag than on gb i guess, but gingerbread is kinda old right now isnt it, i think it's time for u to upgrade too.Well it is ur choice
Click to expand...
Click to collapse
I have another question, Did you notice a degradation in the performance after the update?

iso188 said:
I have another question, Did you notice a degradation in the performance after the update?
Click to expand...
Click to collapse
Yes i did. Before i upgraded my phone to jellybean, everything was so smooth on gb, multitasking, gaming performance are really better on gb when compared to jellybean. My phone still can run smoothly even though i have installed 50 ++ apps when im on gb ,but not anymore when im on jellybean. So the stability, gaming performance and multitasking performance are better in gb. If upgrade to jellybean u can get to experience a newer firmware but at the cost of some performance degradation. But actually jellybean also not that bad just will become laggier when ur system becomes heavy and bad multitasking performance only. Also as soon as u upgraded to jellybean, u can get to flash any custom rom available which will help u to solve the lag problem.

[email protected] said:
Yes i did. Before i upgraded my phone to jellybean, everything was so smooth on gb, multitasking, gaming performance are really better on gb when compared to jellybean. My phone still can run smoothly even though i have installed 50 ++ apps when im on gb ,but not anymore when im on jellybean. So the stability, gaming performance and multitasking performance are better in gb. If upgrade to jellybean u can get to experience a newer firmware but at the cost of some performance degradation. But actually jellybean also not that bad just will become laggier when ur system becomes heavy and bad multitasking performance only. Also as soon as u upgraded to jellybean, u can get to flash any custom rom available which will help u to solve the lag problem.
Click to expand...
Click to collapse
That's bad. I think I will stay on gb and wait for kitkat if it will be released for my phone. I heard that it consumes less ram than jb which is good for midrange devices like mine.

iso188 said:
That's bad. I think I will stay on gb and wait for kitkat if it will be released for my phone. I heard that it consumes less ram than jb which is good for midrange devices like mine.
Click to expand...
Click to collapse
In terms of performance, you can just try to upgrade to JB, root it and then you can try any kernel customization which tweaks the performance too.
And to think that i9070s will get any further update than JB, it would be impossible...it just is
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 01:46 AM ---------- Previous post was at 01:41 AM ----------
Oh! I personally recommend Macedonian JB rom. The performance and battery life are much better
Sent from my GT-I9070 using xda app-developers app

Basebands Reviews

I made this thread so users who tested basebands to provide some useful reviews (battery backup, performance, bloatware, etc) for every user who want to know which baseband, new or old, has what he`s looking for or the baseband just came up and it`s new and he wants to know about it.

I tested MBM-XXLQI from Macedonia recently and all I have to say it brings nothing new about battery backup on the contrary it seems worse than DDULP8 from India or XXLQG-ITV from Italy, and in addition it has a lot more bloatware too.
I am going to test the new VSLPA from Argentina(moviestar) to see what it brings new as it has the latest build date and changelist, and I`ll provide a review in a day or two. You are free to do the same as we may have different opinions.

I am using VSLPA from Argentina from 1 day now and I have to say it provides the best battery backup till now, only 1% consumed over the night.
About performance, it`s pretty much like the other firmwares, tough i notice that lag is slightly reduced in this one or it may be placebo effect, don`t know yet.
Go try it yourself and report back to see if you have a different opinion from mine

I take my words back VSLPA is the best build by samsung for our device since they released Jb for us. I rooted, flashed cocore8.2, removed some bloats, instaled no-frills, set pegasusq+sio, powersave and I drained the battery till it shut down. After I let it charge full I powered it up and I couldnt believe my eyes how fast it was and still is, this build is LAG FREE, the dial pad opens in instant just like cyanogenmod. At first I tought that maybe it's just an one time event but not it still does that and is insanely fast, stable, smooth maybe then most of custom too (no offense to any dev). I know it is hard to believe but please try it for yourself and you'll be surprised.
I'll provide the list of bloats removed when I have time if it is of any use
Sry for the way I express myself but english is not my native language
Goodluck and don't think about it just flash it and see for yourself
Sent from my GT-I9070 using xda app-developers app

7RA13 said:
I take my words back VSLPA is the best build by samsung for our device since they released Jb for us. I rooted, flashed cocore8.2, removed some bloats, instaled no-frills, set pegasusq+sio, powersave and I drained the battery till it shut down. After I let it charge full I powered it up and I couldnt believe my eyes how fast it was and still is, this build is LAG FREE, the dial pad opens in instant just like cyanogenmod. At first I tought that maybe it's just an one time event but not it still does that and is insanely fast, stable, smooth maybe then most of custom too (no offense to any dev). I know it is hard to believe but please try it for yourself and you'll be surprised.
I'll provide the list of bloats removed when I have time if it is of any use
Sry for the way I express myself but english is not my native language
Goodluck and don't think about it just flash it and see for yourself
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Try clearing RAM and apps in background and then try to open dial pad. I it is in background it opens fast on any previous build.

Sent from my GT-I9070 using xda app-developers app

shut_down said:
Try clearing RAM and apps in background and then try to open dial pad. I it is in background it opens fast on any previous build.
Click to expand...
Click to collapse
I did. I tried it after a reboot too and I also it is ok with heaving gaming too. I tried asphalt 8 with interactive+sio and with powersaving and everything was smooth.
If you don't believe me give it a go and try it yourself
Sent from my GT-I9070 using xda app-developers app

Could anyone provide us with link to VSLPA?

Here: http://samsung-updates.com/details/15624/Galaxy_S_Advance/GT-I9070/UFN/I9070VSLPA.html

R_a_z_v_a_n said:
Here: http://samsung-updates.com/details/15624/Galaxy_S_Advance/GT-I9070/UFN/I9070VSLPA.html
Click to expand...
Click to collapse
Yeah, samsung-updates my source too
Sent from my GT-I9070 using xda app-developers app

7RA13 said:
I take my words back VSLPA is the best build by samsung for our device since they released Jb for us. I rooted, flashed cocore8.2, removed some bloats, instaled no-frills, set pegasusq+sio, powersave and I drained the battery till it shut down. After I let it charge full I powered it up and I couldnt believe my eyes how fast it was and still is, this build is LAG FREE, the dial pad opens in instant just like cyanogenmod. At first I tought that maybe it's just an one time event but not it still does that and is insanely fast, stable, smooth maybe then most of custom too (no offense to any dev). I know it is hard to believe but please try it for yourself and you'll be surprised.
I'll provide the list of bloats removed when I have time if it is of any use
Sry for the way I express myself but english is not my native language
Goodluck and don't think about it just flash it and see for yourself
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
7RA13 said:
I did. I tried it after a reboot too and I also it is ok with heaving gaming too. I tried asphalt 8 with interactive+sio and with powersaving and everything was smooth.
If you don't believe me give it a go and try it yourself
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
This is as if you were explaining you saw a ghost.
Are you sure about this? Cause I heard similar things for previous FWs before, even though they all lagged like hell.
And 7 hours ago you were saying the opposite, how's that possible? What exactly fixed it, when it was the same when you first tried it?
Anyways I'm on GB now, got burned once and now I want to be sure if it's really lag free before I upgrade.

in sammobile, some of the firmwares are made for some particular carriers.Is it safe to flash that carrier basrd firmwires??

ajeshmanu said:
in sammobile, some of the firmwares are made for some particular carriers.Is it safe to flash that carrier basrd firmwires??
Click to expand...
Click to collapse
If your device is network free(meaning that another carrier sym is working) you can flash any firmware you want for our device with odin. Juat download it from samsung-updates, unrar it, put the tar file in pda section of odin and hi start.
Sent from my GT-I9070 using xda app-developers app

@TheBeast I told you all the steps I have made. I don't think it's so hard so you can't flash it yourself
Sent from my GT-I9070 using xda app-developers app

7RA13 said:
@TheBeast I told you all the steps I have made. I don't think it's so hard so you can't flash it yourself
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Upgrading isn't hard. Downgrading is a pain in the ass.

TheBeast said:
This is as if you were explaining you saw a ghost.
Are you sure about this? Cause I heard similar things for previous FWs before, even though they all lagged like hell.
And 7 hours ago you were saying the opposite, how's that possible? What exactly fixed it, when it was the same when you first tried it?
Anyways I'm on GB now, got burned once and now I want to be sure if it's really lag free before I upgrade.
Click to expand...
Click to collapse
First of all GB and JB are different in every aspect so you can`t compare one to the other. First time it was just after I flashed it then I did all the things I said ( root, flash cocore kernel, changed governors and I/O etc. ) and after that i used it till it shut down and then while it was turned off I let it full charge, after that i booted into recovery wiped cache and dalvik cache and reboot and that was all.
But you should never expect that JB to be like GB.
If you don`t like stock i suggest you to upgrade from gb to jb then flash CM 10.1 from Team Canjica or if you want stock based Roms try Harshjelly or SamiOS.
Before you do all the things read some guide about how to flash with odin, how to root jb shaan`s guide and some more if needed.
If you do some research before you should not have problems
Goodluck

TheBeast said:
Upgrading isn't hard. Downgrading is a pain in the ass.
Click to expand...
Click to collapse
Why would you want to downgrade? First read guide about Odin and then go and read Harshjelly thread first then flash his rom and from there on should be easier to learn about governors,I/O schedulers,kernel etc. After you think you have a good knowledge base and you`re still not happy with you`re android you can move on to CyanogenMod 10.1 of Team Canjica(19.10 nightly is the most stable version).
Goodluck

7RA13 said:
First of all GB and JB are different in every aspect so you can`t compare one to the other. First time it was just after I flashed it then I did all the things I said ( root, flash cocore kernel, changed governors and I/O etc. ) and after that i used it till it shut down and then while it was turned off I let it full charge, after that i booted into recovery wiped cache and dalvik cache and reboot and that was all.
But you should never expect that JB to be like GB.
If you don`t like stock i suggest you to upgrade from gb to jb then flash CM 10.1 from Team Canjica or if you want stock based Roms try Harshjelly or SamiOS.
Before you do all the things read some guide about how to flash with odin, how to root jb shaan`s guide and some more if needed.
If you do some research before you should not have problems
Goodluck
Click to expand...
Click to collapse
7RA13 said:
Why would you want to downgrade? First read guide about Odin and then go and read Harshjelly thread first then flash his rom and from there on should be easier to learn about governors,I/O schedulers,kernel etc. After you think you have a good knowledge base and you`re still not happy with you`re android you can move on to CyanogenMod 10.1 of Team Canjica(19.10 nightly is the most stable version).
Goodluck
Click to expand...
Click to collapse
Thanks, but been there, done that. All I'm saying is that I doubt it's lag free, I did try various firmwares, kernels and stuff but 5 sec delay when opening apps and lag in games, videos, UI is so bad that it's unbearable. That's why I had to downgrade, which is a much complicated process which frankly I don't want to repeat. That's why I want to make sure the new firmware is lag and delay free before I upgrade again.
And I'm pretty sure JB isn't supposed to be that bad, despite the fact that S Advance isn't much of a phone.

TheBeast said:
Thanks, but been there, done that. All I'm saying is that I doubt it's lag free, I did try various firmwares, kernels and stuff but 5 sec delay when opening apps and lag in games, videos, UI is so bad that it's unbearable. That's why I had to downgrade, which is a much complicated process which frankly I don't want to repeat. That's why I want to make sure the new firmware is lag and delay free before I upgrade again.
And I'm pretty sure JB isn't supposed to be that bad, despite the fact that S Advance isn't much of a phone.
Click to expand...
Click to collapse
In cyanogenmod you wont encounter any kind of lag. So you can flash VSLPA via odin then flash cwm temporary make a backup then root it play with it a day or two and see how it goes and if you dont like it restore from backup then flash cyanogendmod 10.1 and i guarantee that you wont encounter any kind of lag there.
And btw id you want to thank me for any help just hit Thanks button and I`ll know

7RA13 said:
I take my words back VSLPA is the best build by samsung for our device since they released Jb for us. I rooted, flashed cocore8.2, removed some bloats, instaled no-frills, set pegasusq+sio, powersave and I drained the battery till it shut down. After I let it charge full I powered it up and I couldnt believe my eyes how fast it was and still is, this build is LAG FREE, the dial pad opens in instant just like cyanogenmod. At first I tought that maybe it's just an one time event but not it still does that and is insanely fast, stable, smooth maybe then most of custom too (no offense to any dev). I know it is hard to believe but please try it for yourself and you'll be surprised.
I'll provide the list of bloats removed when I have time if it is of any use
Sry for the way I express myself but english is not my native language
Goodluck and don't think about it just flash it and see for yourself
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
thanks for your detail review! will flash it. But i have a question here, if i have flash VSLPA stock ROM, then i flash a custom ROM built on DDLUP, will that custom ROM run on VSLPA baseband?

[Q] How to fix laggy JB

I'm using official JB firmware on my GT-I9070 device and its laggy and hangs frequently. It requires frequent restarting and reseting after a short period of usage. Is there any fix for this without rooting??

navinm_d0 said:
I'm using official JB firmware on my GT-I9070 device and its laggy and hangs frequently. It requires frequent restarting and reseting after a short period of usage. Is there any fix for this without rooting??
Click to expand...
Click to collapse
JB(4.1.2) is laggy and not effective solution.
better try custom roms and enjoy.

My device once had stock JB and it worked well indeed. However, it probably needs time to settle in and will be smoother. Every rom is laggy at the very beginning of usage after flashing.

Root your phone, and flash cocore kernel. Better yet, install HarshJelly, it's a stock based rom. Or any custom rom if you prefer. Nothing much you can do if you don't want to root your phone. Or maybe upgrade your jb firmware to the latest one, LQL
Sent from my GT-I9070 using Tapatalk

^ This.
HarshJelly + cocore, problem solved.

Hey can anyone provide link to the latest cocore kernel.... M new to this forum
Thanks in advance
Sent from my Nexus 5 using XDA Premium 4 mobile app

ashish.kmc08 said:
Hey can anyone provide link to the latest cocore kernel.... M new to this forum
Thanks in advance
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go : http://forum.xda-developers.com/showthread.php?t=2140597

Stock firmware (any jb) +cocore 6.8 stable = best!

Tarola said:
Stock firmware (any jb) +cocore 6.8 stable = best!
Click to expand...
Click to collapse
should i use 6.8 or the latest version??

Latest version (9.0) allows CPU overclocking. Your phone may or may not be stable at 1.28ghz, instead of stock 1 ghz.
If it turns out to be a problem, then go back to 8.6, 6.8 is hopelessly old... or just use no frills CPU control to set your cpu back to 1 ghz and enjoy 9.0

Stock 4.1.2 + cocore 9.0 flies...
Just set your cpu to 1.0
Sent from my GT-I9070 using xda app-developers app

ashish.kmc08 said:
should i use 6.8 or the latest version??
Click to expand...
Click to collapse
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing

If you want to stick with stock firmware mean root it and uninstall the bloatware comes with stock os. Use the greenify app to stop the unwanted apps running in background.
Or else try custom jelly or kit Kat Rom. Lot of roms available for our model.
Your wish
Sent from my GT-I9070 using xda app-developers app

Try using JB Stock without SDCARD.
If the problems go away this is the problem.
I suspect that the JB version for SGA has trouble dealing with SDCARD. It is no coincidence that the internal storage has been a priority for several most current devices.
Unfortunately we have very little internal storage.
Advise a SDCARD good quality and good speed.
Also avoid occupy it completely. This goes also for internal storage.
Another good practice is to optimize from time to time the SDCARD.

Tarola said:
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing
Click to expand...
Click to collapse
9.0 tested => going back to 6.8 no lag just fly

Tarola said:
9.0 tested => going back to 6.8 no lag just fly
Click to expand...
Click to collapse
reverted to 6.8 (previous version that I use) and go back to 9.0 no lag

Try install google home and feel the difference..its more smooth than touchwiz...
Sent from my GT-I9070 using XDA Premium 4 mobile app

Tarola said:
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing
Click to expand...
Click to collapse
I use Cocore 8.2. long time without lags, freezes, hangs, etc..
Happened a reboot , but only one in months using normally.
Totally Acceptable.Probably no connection with JB Stock or kernel. But Android itself
Dialer, message, etc..Only replaced and solved.
Stock camera has also worked well. Just always use internal storage and no more problems.
Launcher: "NOVA" . Smooth and without lags.
Anyway, using for months, I have no more complaints about stock JB.
SGA is not the fastest smart and has only 768 RAM, but everything works fine with JB Stock.
Of course I'll try AOSP or CM in final version.