Hi. I'm using jellybam 4.1.0 and I have to say I have problems with performance control app, so I switched to ROM toolbox pro. Trying to optimize the phone, in memory manager section, there is a part called memory minfree. I think it set the minimum memory should stay free. There are many presets. If I am correct, the highest preset (with highest values) should give the most free memory as possible. But is it safe choosing that preset or it is too extreme?
Sent from my GT-N7000 using xda premium
May be that will force close some apps.
asusgarb said:
Hi. I'm using jellybam 4.1.0 and I have to say I have problems with performance control app, so I switched to ROM toolbox pro. Trying to optimize the phone, in memory manager section, there is a part called memory minfree. I think it set the minimum memory should stay free. There are many presets. If I am correct, the highest preset (with highest values) should give the most free memory as possible. But is it safe choosing that preset or it is too extreme?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
For u I will recomend V6supercharger, do not hack kernel OOM with out knowing 100% sure what are u doing...It cause bootloops, and drain ur battery.
here is the link: http://forum.xda-developers.com/showthread.php?t=991276
Do not listen to people who say that those scripts doesn't work, they does, and it's good.U just need to follow the instructions and READ of course.
:highfive:
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
That is for ur SGN memory
Sale_zg said:
For u I will recomend V6supercharger, do not hack kernel OOM with out knowing 100% sure what are u doing...It cause bootloops, and drain ur battery.
here is the link: http://forum.xda-developers.com/showthread.php?t=991276
Do not listen to people who say that those scripts doesn't work, they does, and it's good.U just need to follow the instructions and READ of course.
:highfive:
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
That is for ur SGN memory
Click to expand...
Click to collapse
+1 for the v6 supercharger scripts.. they give jawdropping results when it comes to free memory.. must give it a go
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
+1 for the v6 supercharger scripts.. they give jawdropping results when it comes to free memory.. must give it a go
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thanks. i tried on my previous dell streak and it worked like a charm. but after a lot of time i don't remember which are the best setings.
1. on scrolling speed i think 0 is the best value.
2. from 1 to 17 please help me choosing the best for galaxy note because i wouldn't like to make it worst than before.
I forgot the last thing. I always use ram manager pro by juwe11 because let me use less memory. Can I use that after supercharger?
it depend on your usage if you play heavy games you will need much more memory or you do alot multi-tasking everyone have their different usage.. so try them all for a specific time interval and select your preffered ones
Sent from my GT-N7000 using Tapatalk 2
asusgarb said:
Hi. I'm using jellybam 4.1.0 and I have to say I have problems with performance control app, so I switched to ROM toolbox pro. Trying to optimize the phone, in memory manager section, there is a part called memory minfree. I think it set the minimum memory should stay free. There are many presets. If I am correct, the highest preset (with highest values) should give the most free memory as possible. But is it safe choosing that preset or it is too extreme?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=897823
think this wil help u.
Related
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Use ondemand . .
And 604mhz . . For RC5.5 by squadzone's . .
Sent From My GT-S5570 using xda premium
@PERFORMANCE
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Click to expand...
Click to collapse
Explaining everything about performance setting so WE could TWEAK it IF, WE KNOW WHAT WE ARE DOING.
THANKS
VR.gtmini said:
@PERFORMANCE
Explaining everything about performance setting so WE could TWEAK it IF, WE KNOW WHAT WE ARE DOING.
THANKS
Click to expand...
Click to collapse
On demand means the processor will clock to whatever speed within the set parameters it needs to run smoothly. It will always try to run as low as possible while not compromising speed. This is generally the best option and there's little to no reason to change it. Unless you want to save as much battery as possible of course, then you could put it to energysaving. You really don't want maxperformance as that will drain your battery and give little to no advantage over ondemand
The other is the clockspeed of the CPU and should generally be left alone. Overclocking it too much can permanently damage your hardware. There is no cooling system, so increase it very conservatively. You should leave it at stock, unless things are being slow, but don't put it too high. The higher you put it, the faster it will process yes, but also the more energy it uses and therefore heat it creates. Too much exposure to heat will mean game over. Overclocking is also likely to lower the lifespan of your device.
Hope that helps
can i have some script for better RAM management. and also tell me how to implement it [ i am a noob ]
& using mebitek's latest CM7 rom
thanx
pratap6789 said:
can i have some script for better RAM management. and also tell me how to implement it [ i am a noob ]
& using mebitek's latest CM7 rom
thanx
Click to expand...
Click to collapse
http://www.xda-developers.com/android/rom-toolbox-by-jrummy-sassibob-review/
Good post!
yippiiiiiiiii my 200th
VR.gtmini said:
Devs/XP users Please provide help and guidance for performance settings explaining each and every menu and sub menu/options.
Also provide best combination of settings to suit needs for Battery, Normal, Performance.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
1.do not oc your device more than 800 mhz and use ondemand governor,
2 .use the inbuilt option to choose the frequency because app like set cpu use 4~5 mb of your ram (setting> cm setting> cpu setting)
3. try using adw ex launcher it uses 11 mb ram only avoide go launcher
4. create a swap partition of 512 mb and set swapiness to 80%
5. use only default android keyboard (ics android keyboard is better)
6. use task killer to kill ongoing useless task time to time
7. do not use much widget at the same time
I remember mebitek or yagya or some other famous dude said that moving cache to sd card slows your device down..?
I set JIT off, and VM heap to 24. Also oc to 710 MHz, phone works like a charm. But i don't play games, i just want the phone to be snappy. I think the vm heap might cause fc's for bigger applications, at least playstore always force closes when i had VM heap at 16.. but otherwise the phone was really responsive with 16.
Battery is also good with those settings. Please correct me if i'm somehow mistaken!
jit on should be better
Sent from my GT-S5670 using Tapatalk
btw guys. ondemand and what min cpu freq. 122 or 245 i read somwhere that 245 use less battery
Sent from my GT-S5670 using Tapatalk
djozaa said:
btw guys. ondemand and what min cpu freq. 122 or 245 i read somwhere that 245 use less battery
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Just leave min cpu freq to 245, yes.
Also, if your kernel has Smartassv2 or Lilgv2 available, use those instead, they're better for Mini than stock Ondemand.
djozaa said:
jit on should be better
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
How so?
Sent from my GT-S5570 using XDA
(FOR BETTER PERFORMANCE IN CM9):-
go to settings
1)developer option-mark Gpu rendering ,windows animation &transitin animation as 0.5,mark kill app back button.
2)performance-use 16 bit,processor lilg as governor at max710(u don't see much flickers)
3)use apex launcher as default .(push it in to ur system-apps)
can someone quickly explain the Free Memory setting in the performance section of the Ass app (this in Slim ICS but have seen similar setting in other roms)
It says "the amount of ram the minfree taskiller will keep" and it is confirgurable for 25 to 100mb...default at 50.
what exactly does this mean and what's the difference in using a different value here and what is best for certain scenarios? minfree taskiller? please explain..
thanks
Sent from my SGH-I897 using XDA App now running beautifully on Glitch kernal @ 1.785Ghz!
pchemerys said:
can someone quickly explain the Free Memory setting in the performance section of the Ass app (this in Slim ICS but have seen similar setting in other roms)
It says "the amount of ram the minfree taskiller will keep" and it is confirgurable for 25 to 100mb...default at 50.
what exactly does this mean and what's the difference in using a different value here and what is best for certain scenarios? minfree taskiller? please explain..
thanks
Sent from my SGH-I897 using XDA App now running beautifully on Glitch kernal @ 1.785Ghz!
Click to expand...
Click to collapse
it means if you set the value 70 mb then min free will keep the 70 mb ram free for your use by killing tasks and if it is set to 50 mb then 50 will always be free
---------- Post added at 09:27 AM ---------- Previous post was at 09:23 AM ----------
I think 50 mb is best value
hi dev
I am using cm10.1 rc2 but it has alot of lag. Any way to improve it? ??
Replace your ace processor amd gpu buy an S4 dissemble is octa core and gpu and glue it on ace it will be so much faster
Just kidding
Dont fill up system and data
Try ram management script's
U can try using swap if u have a fast sdcard
Overlock it a bit and change governor smartassv2 always got me on the good away
Use lite browsers and launchers
Thats all u can do
Sent from my GT-I9300 using xda premium
xactor said:
hi dev
I am using cm10.1 rc2 but it has alot of lag. Any way to improve it? ??
Click to expand...
Click to collapse
Install juice defender ultimate from Google Play™ & overclock ur phone a bit more than usual via No-frills.
You'll see the difference
Sent Via XDA™ Premium
Galaxy_Rohit said:
Install juice defender ultimate from Google Play™ & overclock ur phone a bit more than usual via No-frills.
You'll see the difference
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Juice defender don't boost your performance and nofrills is USELESS in CM roms because they can set de frequencies without 3er party apps... cm roms have in-built a system to OC/UV CPU frequencies... installing apps you only get more lag because they'll increase your ram consumption, the best way to reduce lag is bareboning the rom, kill useless process and using some scripts could help too
I'm damn sure No-frills increases performance but increases battery usage as well, so for this use juice defender. Both of them are just ~3mb (combined) so need to mumbo jumbo for free space... lol
Sent Via XDA™ Premium
Use greenify, and select all those apps that remain open, such as facebook, viber ...
Galaxy_Rohit said:
I'm damn sure No-frills increases performance but increases battery usage as well, so for this use juice defender. Both of them are just ~3mb (combined) so need to mumbo jumbo for free space... lol
Sent Via XDA™ Premium
Click to expand...
Click to collapse
JAJAJAJAJAJAJAJA
Please listen to me, in your cm7/9/10.1.0 rom go to settings> dev options and set the frequencies that you want!!! forget to use 3er party apps to control CPU speed!!!!
Ver3go said:
Replace your ace processor amd gpu buy an S4 dissemble is octa core and gpu and glue it on ace it will be so much faster
Just kidding
Dont fill up system and data
Try ram management script's
U can try using swap if u have a fast sdcard
Overlock it a bit and change governor smartassv2 always got me on the good away
Use lite browsers and launchers
Thats all u can do
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
xactor said:
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
Click to expand...
Click to collapse
Greenify used to make a difference on my ace also. Give it a try. It helps to hibernate unnecessary apps
Sent from my GT-I9300 using xda premium
xactor said:
thnx for wonderfull suggestion now i am using seeder with aggressive mode working fine but not like gb
Click to expand...
Click to collapse
i m using stock 2.3 based rom cozz roms based om cm7+ consumed so mch battery and performance is also not too good.
Try my build.prop tweaks...
Sent from my GT-S5830 using xda premium
I am having problem high RAM usage after continuous usage of phone for 3days, phone became very slow.
If i restart phone it behaves normal. Can somebody help on this rom.
I just love this rom, i dont want to switch to other.
harsha.pic said:
I am having problem high RAM usage after continuous usage of phone for 3days, phone became very slow.
If i restart phone it behaves normal. Can somebody help on this rom.
I just love this rom, i dont want to switch to other.
Click to expand...
Click to collapse
try supercharger and automatic engine flush every 24 hours - it forces the system to get rid of some unused cache.
I tried liquidsmooth rom its performance is not good at all now i changed to pa3.99 its much more better in terms of performance
Sent from my GT-I9070 using XDA Premium 4 mobile app
im using liquid smooth rom but i think its really really good, it has all the features and ram usage? i get a minimum of 300mb free at all times except when im heavy multi tasking!!! But battery sucks. Battery goes down very fast when using the phone and also when i leave the wifi in deep sleep.
---------- Post added at 09:26 PM ---------- Previous post was at 09:26 PM ----------
shadytarek_97 said:
I tried liquidsmooth rom its performance is not good at all now i changed to pa3.99 its much more better in terms of performance
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
bugs in pa3.99 ?
szzlgupta said:
im using liquid smooth rom but i think its really really good, it has all the features and ram usage? i get a minimum of 300mb free at all times except when im heavy multi tasking!!! But battery sucks. Battery goes down very fast when using the phone and also when i leave the wifi in deep sleep.
---------- Post added at 09:26 PM ---------- Previous post was at 09:26 PM ----------
bugs in pa3.99 ?
Click to expand...
Click to collapse
Almost there is no bugs everything is good the rom is stable , smooth and everything is working
Sent from my GT-I9070 using XDA Premium 4 mobile app
shadytarek_97 said:
Almost there is no bugs everything is good the rom is stable , smooth and everything is working
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ram usage? and lag anywhere? halo feature? transparent lockscreen?
szzlgupta said:
ram usage? and lag anywhere? halo feature? transparent lockscreen?
Click to expand...
Click to collapse
i dont look at ram usage because performance is good ( same as 17/11 build of cm10.1 if u used it ) i have some apps working like fb , messenger whats app , viber and some other apps and still performance is good and no significant lag the rom doesnt have all the features of liquid smooth it have halo and some other customizations ( actually i didnt use any of liquid smooth except halo ) and yes it have transparent lock screen but i didnt try it
I have installed doomlord kernel and I would like to lower the voltages of my cpu
what app works on the z1?
I tried kernel tuner, but it did not work
Set CPU, pimp my xperia, faux123
Sent from my C6903 using XDA Premium 4 mobile app
Where can I find the voltage values in pimp my z1?
Sent from my C6903 using xda app-developers app
dladz said:
faux123
Click to expand...
Click to collapse
Are you sure faux123 made an app for Z1 or an App called that? I cannot find it anywhere...can you guide me?
eclyptos said:
Are you sure faux123 made an app for Z1 or an App called that? I cannot find it anywhere...can you guide me?
Click to expand...
Click to collapse
It's called fauxclock actually
nickelby said:
It's called fauxclock actually
Click to expand...
Click to collapse
Apologies, I was going from memory, not sure where the 123 came from, sorry about that.
Sent from my C6903 using XDA Premium 4 mobile app
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
algarues said:
Where can I find the voltage values in pimp my z1?
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Actually it doesn't have it, Lol sorry about that, it was late and I assumed it did have it. Fail
Sent from my C6903 using XDA Premium 4 mobile app
dladz said:
Apologies, I was going from memory, not sure where the 123 came from, sorry about that.
Sent from my C6903 using XDA Premium 4 mobile app
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
Actually it doesn't have it, Lol sorry about that, it was late and I assumed it did have it. Fail
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Anyway, the point is that if I used a free application like kernel tuner, it says that the kernel lacks the module to adjust the voltages
So I am not gonna risk it with a pay for app
Or have you been able to change your voltages somehow?
If yes, how?
algarues said:
Anyway, the point is that if I used a free application like kernel tuner, it says that the kernel lacks the module to adjust the voltages
So I am not gonna risk it with a pay for app
Or have you been able to change your voltages somehow?
If yes, how?
Click to expand...
Click to collapse
I wouldn't and i haven't tried m8, in all fairness at this CPU and GPU level it's negligent to even bother, the gains are so small that it's not worth it. Just slim down your apps and optimize battery life that way if that's what you want or use autostarts to close apps u don't need if it's performance youre after, changing governors can cause reboots.
In all honesty I don't think the gain's are worth the risks.
dladz said:
I wouldn't and i haven't tried m8, in all fairness at this CPU and GPU level it's negligent to even bother, the gains are so small that it's not worth it. Just slim down your apps and optimize battery life that way if that's what you want or use autostarts to close apps u don't need if it's performance youre after, changing governors can cause reboots.
In all honesty I don't think the gain's are worth the risks.
Click to expand...
Click to collapse
Well, at the moment I use for daily things, and the phone is extremely fast and responsive, the cpu set at about 1200 Mhz maximum
That means i use about 30% battery per day
So maybe even lowering the voltages......
Lowering voltage (VDD levels) is currently disabled in Doomkernel because of some 4.4.x issues - some driver kind of issues to make it work!
Sent from my C6903 using XDA Premium 4 mobile app