Database Develop

[Q] unable to flash rom through odin

hi
i update my phone ota on 02.07.12
after this i m flash abbyss kernal
after this my phone did not start and go to in recovery mode
but i m trying to flash using pc odin its stop on factoryfs
help me to recover pls

What version of the kernel did you flash
Sent from my SPH-D710 using xda premium

Download Stock KL3 GB
Install kies and all its drivers
Close kies and open odin
Connect phone in dowload mode
Click on pda and select KL3...endin should be .tar if not extratct it once
Click start

4.2
KnukLHead said:
What version of the kernel did you flash
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
abyysskernal 4.2
thanx for reply

i also try that
Rulinglionadi said:
Download Stock KL3 GB
Install kies and all its drivers
Close kies and open odin
Connect phone in dowload mode
Click on pda and select KL3...endin should be .tar if not extratct it once
Click start
Click to expand...
Click to collapse
<OSM> N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
after this odin is doing nothing
plzzz help

Did you perform any wipes under stock is kernel? Looks like superbrick.
Sent from my GT-N7000 using xda premium

maybe you can use the pit file aswell..
google galaxy note n7000 16gb pit file and in odin use the pit file and everything as u did bfre..and it may get back to normal..
i hope i helped

gurjit98 said:
<OSM> N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
after this odin is doing nothing
plzzz help
Click to expand...
Click to collapse
I am afraid, You are Superbricked. I have been in this situation recently. I revived my phone, using ADB method though i had to lose 3GB space, but thats not a big deal for me, as I have got 32GB external SD. If you have got the warranty, just flash the original PIT+ICS rom (won't install) but you claim your warranty saying Samsung that it got bricked while you were upgrading through Kies. If you have burnt your boats, follow my route
Sorry for the Brick.

Is my NOTE bricked beyond repairs.

I was on asylum omni rom build dated 02.02.2014.
One fine day, my fone just got switched off. When started it was stuck on Galaxy note screen and wont go into recovery mode. Download mode working fine though.
I read a lot of threads in this forum and..
1. Got Odin 3.07
2. Downloaded latest philz kernel
3. tried to flash under PDA tab but stuck at "NAND write fail "
4. Downloaded 16GB pit file for N7000.
5. FLashed PIT file with repartition option ticked. Then it said "Repartition failed"
Is my note bricked beyond repair, Any help... Please!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

jamy862004 said:
I was on asylum omni rom build dated 02.02.2014.
One fine day, my fone just got switched off. When started it was stuck on Galaxy note screen and wont go into recovery mode. Download mode working fine though.
I read a lot of threads in this forum and..
1. Got Odin 3.07
2. Downloaded latest philz kernel
3. tried to flash under PDA tab but stuck at "NAND write fail "
4. Downloaded 16GB pit file for N7000.
5. FLashed PIT file with repartition option ticked. Then it said "Repartition failed"
Is my note bricked beyond repair, Any help... Please!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If download mode is working, I would suggest to try installing a Samsung TouchWiz stock ROM via Odin. But better wait for someone with more knowledge than me or someone that have already faced that issue to reply you
@chasmodo You are on that device since a lot, some idea for that error?
Enviado desde mi Moto G mediante Tapatalk

Try flashing any new version of philz in PC Odin. Then do full wipes and try flashing your custom ROM again from sdcard. Post back.
Sent from Nexus 5 on Slimkat

pc odin wont succeed in flashing philz kernel.. it says nand write fail..l
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fastboot?
Sent from my GT-N7000 using XDA Premium 4 mobile app

jamy862004 said:
pc odin wont succeed in flashing philz kernel.. it says nand write fail..l
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It seems you have flashed PhilZ revovery instead of his kernel. Find the kernel in the thread in the ori dev. The kernel include recovery with it.
Sent from my GT-N7000 using Tapatalk 2

Yep.
Sent from Nexus 5 on Slimkat

I rectified my mistake as you pointed out... but i get this
If i am still wrong can you please point me out to the thread.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What is the exact version of Odin you are using.
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
I think this one may be older which may work better. Then flash via pda just test. I am not sure it will make a difference. http://www.google.com/url?sa=t&sour...IxHp1ISlP2fzGKhtw&sig2=gsQ88hiD9jIS86zQ-7-PLw
Sent from Omni Nexus 5
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Obviously don't flash the pit that is in that zip.
Sent from Omni Nexus 5

AndroidSlave said:
What is the exact version of Odin you are using.
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
I think this one may be older which may work better. Then flash via pda just test. I am not sure it will make a difference. http://www.google.com/url?sa=t&sour...IxHp1ISlP2fzGKhtw&sig2=gsQ88hiD9jIS86zQ-7-PLw
Sent from Omni Nexus 5
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Obviously don't flash the pit that is in that zip.
Sent from Omni Nexus 5
Click to expand...
Click to collapse
ODin i was using was 3.09.
Flashed now using odin3 v1.85. Reinstalled usb drivers and rebooted pc before that.. ensured i did not flash the pit file and pda option was selected. Also changed the USB cable adn trying different usb ports but it seems by only com3 is getting me ahead. rest all does not recognize the phone. Stuck here now.
EDIT1: also..initially my binary counter was zero.. now every time i flash with odin, it is increasing. now it is 4.
Edit 2: I tried different versions of odin. 1.3, 1.85, 3.07, 3.09. gettting stuck at nand write start always..
Edit 3: It actually completed with 3.07 version but still operation failed.

Did you reboot into download mode?

i was in download mode when using odin.
Should i go ahead and flash pit files as mentioned here. http://forum.xda-developers.com/showthread.php?t=1667886&page=116

Whenever I had to use Odin, I did use the 1.87 version.
Make sure that ..
+ no antivirus is running etc
+ KIES is not running (kill all KIES processes via task manager)
The counter is a secondary problem> Triangle Away > after you revived your Note
Good luck?
Sent via GALAXY NOTE N7000 // KitKat

i have disabled AV and FW. I uninstalled kies but kept the usb driver for mobiles. Tried Odin 1.87 again and getting stuck at nand write start.
I flashed all custom pit files as mentioned here http://forum.xda-developers.com/showthread.php?t=1661590&page=2 for case 2. but all failed. It said "Repartition failed"
I dont understand this step in manual partition.
"- Prepare adb folder: download adb folder from Here and extract adb folder to c: driver of your computer, you will have the tools folder which has adb.exe in it. You should now have adb working for your Note.
- Install custom recovery so that you can get into recovery and connect adb. "
Does this mean my fone is superbricked? What has caused this.. i was on stable omni rom which many are using.. i always stayed on stock kernels coming with the rom.

Boot partition could be corrupted for some unknown reason. Take the battery out for a while and see if you can find an Odin flashable stock ICS or JB kernel. (Dr Ketan ?) If flash is successful (it won't raise flash counter), you can boot into stock recovery and flash a Philz kernel and wipe everything, then flash a new rom. If not, your phone is as good as hardbricked. Worse actually, because download mode is still accessible and raised flash counter is there for all to see
Sent from my C6603 using xda app-developers app

i am already out of warranty.. How does the counter matter? [My counter is on 8 now. Can i reset the counter now?]
I am trying to search stock JB kernel in the forum. Search option yielding nothing. Will keep searching..
What would cause such an hardbrick?

Ok so counter is not an.issue then.
Phones just die for no reason sometimes
Edit: See if.you can flash a modified pit from @hg42 http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my C6603 using xda app-developers app

there are 352 patched pits in this for N7000 16GB. Which one do i exactly flash?
Can anyone please point me to an Odin flashable stock ICS or JB kernel. (Dr Ketan ?) ?
Thank you all for your patience

Try thishttp://d-h.st/IvQ
Flash in PDA box
If it works, see if.you can boot into stock recovery (but don't do any wipes)
Sent from my C6603 using xda app-developers app

shoey63 said:
Try thishttp://d-h.st/IvQ
Flash in PDA box
If it works, see if.you can boot into stock recovery (but don't do any wipes)
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Stuck at NAND write start!
Will any pit file from hg42's http://forum.xda-developers.com/show....php?t=1667886 post work?

Unable to flash Stock ROM for Note 5 N9208. Need help.

I have this error message when I use Odin3 v3.10.7. Anyone can advise what should I do to flash stock ROM on my device. Thanks in advance for all the help.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

dannche said:
I have this error message when I use Odin3 v3.10.7. Anyone can advise what should I do to flash stock ROM on my device. Thanks in advance for all the help.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
from this post http://forum.xda-developers.com/note5/help/galaxy-note-5-sm-n9208-t3198411 I saw this:
1)download the package and unzip.
2) INSTALL CROM service apk run and following the instruction to unlock
3)go setting > lock screen and security>find my mobile> uncheck Remote control and Global location service
4)go setting>develop option>turn on oem unlock
5)use odin and flash N9208-root(0901)
however, I am by no means an expert.. would suggest searching and reading and reading the multiple threads here..

p33l05 said:
from this post http://forum.xda-developers.com/note5/help/galaxy-note-5-sm-n9208-t3198411 I saw this:
1)download the package and unzip.
2) INSTALL CROM service apk run and following the instruction to unlock
3)go setting > lock screen and security>find my mobile> uncheck Remote control and Global location service
4)go setting>develop option>turn on oem unlock
5)use odin and flash N9208-root(0901)
however, I am by no means an expert.. would suggest searching and reading and reading the multiple threads here..
Click to expand...
Click to collapse
I have no problem rooting my device. I followed the same procedure as describe in this forum. Now I want to flash back the original stock ROM (basically I want to unroot my device) but it failed at the below:
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!

Not sure this will help. I got this message on my Note 5 after Odin failed.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208DX
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1

dannche said:
Not sure this will help. I got this message on my Note 5 after Odin failed.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N9208DX
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1
Click to expand...
Click to collapse
I think I might have found the problem. SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1 message could be because I am using an old Stock ROM. A few days ago, I did OTA upgrade then I root it. Now when I try to unroot it with a lower version of the Stock ROM, it will not work.
Any advise where I can get the latest Stock ROM that would be a great help.

dannche said:
I think I might have found the problem. SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1 message could be because I am using an old Stock ROM. A few days ago, I did OTA upgrade then I root it. Now when I try to unroot it with a lower version of the Stock ROM, it will not work.
Any advise where I can get the latest Stock ROM that would be a great help.
Click to expand...
Click to collapse
Here you go. SamMobile

B.U.M said:
Here you go. SamMobile
Click to expand...
Click to collapse
Thanks. With the new Stock ROM, the problem was resolved.

dannche said:
Thanks. With the new Stock ROM, the problem was resolved.
Click to expand...
Click to collapse
Great. glad you got it working again. did you use the OJ3 or the old OH4?

hallo, i try to flash taiwan firmware on my n9208 but odin not flash anithing, so i read the instruction but when i downloaded CROM 1.0.4 from Galaxy apps the apk don't work and close .
so i can't flash anithing with odin ???
Thanks

hi everyone
i need help i tried to upgrade my Tab GT-N8010 through Kies after download the file it stuck on downloading and do not turn off target.
i tried hard reset as per procedure but reboot again.
please advise me what i can it.
---------- Post added at 12:00 PM ---------- Previous post was at 11:51 AM ----------
hi everyone
i need help i tried to upgrade my Tab GT-N8010 through Kies after download the file it stuck on downloading and do not turn off target.
i tried hard reset as per procedure but reboot again.
please advise me what i can it.

cant download at samobile
dannche said:
Thanks. With the new Stock ROM, the problem was resolved.
Click to expand...
Click to collapse
i try download stok rom at samobile,but i cant download..

9208DX , odin fails on cm.bin
i am having the same problem, ODIN fails after cm.bin,
tried with new rom from sammobile - still the same, tried with odin 3.10.7 and 3.10.6
nothing, any ideas?

n9208TW and n9208SMA are different. you can not flash firmware of TW to SMA. download correct one
Sent from my SM-N9208 using Tapatalk

Hey you can try tsar300 to download Samsung original stock rom http://www.tsar3000.com/Joomla/index.php?option=com_content&view=category&id=55&Itemid=82
---------- Post added at 07:15 PM ---------- Previous post was at 07:12 PM ----------
Just tap thanks if I help

waheem said:
Hey you can try tsar300 to download Samsung original stock rom http://www.tsar3000.com/Joomla/index.php?option=com_content&view=category&id=55&Itemid=82
---------- Post added at 07:15 PM ---------- Previous post was at 07:12 PM ----------
Just tap thanks if I help
Click to expand...
Click to collapse
Sadly, there's no PIT file for N9208. I need it too :crying: :crying: :crying:

A bad pit can bricked your phone you can create your own pit show this http://forum.xda-developers.com/showthread.php?t=1916936

Use KIES3,
select."Firmware Upgrade and Initialisation"
Follow instraction and Plug your phone (Downloading mode). Now your PC should install driver.
After driver installed, turn off Kies3. And now use Odin to flash N9208, the problem of FAIL should solved.
I solved my problem with others Asia product code ~

Hello there
NOTE 5 DUOS my device SM N9208 CSC Malaysia
ASIA my device
I want to install ROMs for this device EUROPE ROM ... EUROPE MODEL SM N920CD
I've tried it, but gave error
maybe I could not
or
Which model SM N ???? Need to install
FOR EUROPE
which supports
Which ROM ???
to take a different ROM
Do I need to change the CSC code?
these devices do not support a different ROM?
or this process
Do I need to root?
Do you have the same problem living
briefly
Do you have finished this problem?
what should I do ?
Does anyone have information?
Could you please help me ?

I had this problem with the Note 5 SM-N920T when i was trying to unroot the phone, whatever version of odin or firmware I use it keep failing.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Until I use the Smart Switch-->device installation--> I put my model number and serial and I was able to unroot and install the latest firmware without any issues . hope this help for those who need it.

xganonx said:
I had this problem with the Note 5 SM-N920T when i was trying to unroot the phone, whatever version of odin or firmware I use it keep failing.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Until I use the Smart Switch-->device installation--> I put my model number and serial and I was able to unroot and install the latest firmware without any issues . hope this help for those who need it.
Click to expand...
Click to collapse
there is no option in smart switch called device installation can u post a screenshot please.

Can't Unroot Note 4 5.1.1 using ODin

For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858

Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?

I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything

Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...

Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7

mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future

mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"

waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..

mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too

G920T Android 6.0.1 Marshmallow Update G920TUVU3EPD1_G920TTMB3EPD1_TMB.zip

https://www.androidfilehost.com/?fid=24499762635997683
I posted it in the Marshmallow Update Thread..
I thought it would get lost in the mix so I wanted to give it's own thread..
Edit: Please do not try to flash the .Zip in recovery.. this is just a compressed file. Unzip and you can flash this using ODIN..
I recommend a factory reset before flashing..

Stock, rooted or details?
Sent from my SM-G920T using XDA Premium 4 mobile app

Maddball said:
Stock, rooted or details?
Sent from my SM-G920T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It literally just came out today for the SM-G920T so my guess is this is stock.

what would be the best way to flash this if i'm on a custom ROM right now?
just regular flash through ODIN?

tflogic said:
what would be the best way to flash this if i'm on a custom ROM right now?
just regular flash through ODIN?
Click to expand...
Click to collapse
Put the .tar into PDA and flash. You'll have to install your recovery again through ODIN also. I haven't been able to find a root unless you use a universal kernel in the s6 thread or in the unified development thread. I'm DL'ing now. I'll post after I try a few kernels compatible.

magda623 said:
Put the .tar into PDA and flash. You'll have to install your recovery again through ODIN also. I haven't been able to find a root unless you use a universal kernel in the s6 thread or in the unified development thread. I'm DL'ing now. I'll post after I try a few kernels compatible.
Click to expand...
Click to collapse
according to this post, SuperSU Beta seems to be working fine.

tflogic said:
according to this post, SuperSU Beta seems to be working fine.
Click to expand...
Click to collapse
Possibly. However, there is no recovery for our device listed on the recovery page. The fact that recovery breaks the boot.img without root sounds shaky though. I'll try it a few different ways. DL is done. Flashing now.

Zaphodspeaks said:
https://www.androidfilehost.com/?fid=24499762635997683
I posted it in the Marshmallow Update Thread..
I thought it would get lost in the mix so I wanted to give it's own thread..
Click to expand...
Click to collapse
Think I flash this on my.metro pcs version I flashed the tmobile 5.1.1 update on my metro pcs version it's basically the same phone

Maddball said:
Stock, rooted or details?
Sent from my SM-G920T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is 100 percent stock.. from Sam Mobile..
Hell it came out early this morning.. No one has had the time yet to make a custom version..
I don't recommend updating from a Custom ROM..
If your 100 percent 5.1.1 Stock you can flash this with ODIN with no problems..
Oh its a Zipped .Tar file.. Don't try to flash the Zip.. Again do NOT try and flash the .Zip.. it will fail and you will be stupid to try..

https://support.t-mobile.com/docs/DOC-21138

Pros:
- Fast
- Beautiful UI
- New functions
- Ram Management has been fixed
- Better battery life
Cons:
- Lost some important functions
Sent from my SM-G920T using XDA-Developers mobile app

i have a sm-g920t with an argentinian sim my firmware is G920TUEU3COK1. Can i use my SIM in this firm?

adidas123 said:
Pros:
- Fast
- Beautiful UI
- New functions
- Ram Management has been fixed
- Better battery life
Cons:
- Lost some important functions
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
Which functions? I haven't noticed anything missing so far.

I'm having trouble flashing this in Odin (3.09). It gets stuck at NAND Write Start! I tried several times. I even waited 15 minutes, but no progress. Is this because the TAR file is 3.6 GB? My computer recognizes my phone's USB connection. Earlier tonight I flashed a TAR file for my Galaxy Tab S without a problem. So weird. I tried different USB ports and reinstalled the drivers.
Here's what ODIN shows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!

Hi,
I tried to flash this using odin but it did not work so I went ahead and used Samsung Smart Switch that automatically downloads 6.0.1 and flashes it. The process, however, failed and now the phone (G920T) is stuck on a blue screen that says, "An error has occurred while updating the system software. Use emergency recovery function in the Smart Switch PC software." (image: http://i.imgur.com/t401aO6.png). Rebooting the phone takes me to the same place. I'm, however, able to get into download mode. I have tried the emergency recovery in download mode as specified by this video: https://www.youtube.com/watch?v=mi7O0OvnS2E, but it still fails, giving me this error: http://i.imgur.com/t401aO6.png. Could someone help me get my phone working?
A few notes:
- My previous firmware was 5.1.1 stock, however, I had flashed a rooted kernel using odin.
- Within download mode, it says the following: swrev b:3 k:2 s:2
Thank you in advance.
EDIT: flashing with odin gives me this error: http://i.imgur.com/oGZiCow.png

HKSpeed said:
I'm having trouble flashing this in Odin (3.09). It gets stuck at NAND Write Start! I tried several times. I even waited 15 minutes, but no progress. Is this because the TAR file is 3.6 GB? My computer recognizes my phone's USB connection. Earlier tonight I flashed a TAR file for my Galaxy Tab S without a problem. So weird. I tried different USB ports and reinstalled the drivers.
Here's what ODIN shows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
Click to expand...
Click to collapse
You using an older version of ODIN
Try Odin3_v3.10.7

Need help, Im looking for the latest modem and bootloader for this. Just the bootloader and modem. Thanks!

Zaphodspeaks said:
You using an older version of ODIN
Try Odin3_v3.10.7
Click to expand...
Click to collapse
Thanks. That worked. I didn't know there was a newer version available.

I don't suppose there will be a recovery-flashable version of this one, will it?

HKSpeed said:
I'm having trouble flashing this in Odin (3.09). It gets stuck at NAND Write Start! I tried several times. I even waited 15 minutes, but no progress. Is this because the TAR file is 3.6 GB? My computer recognizes my phone's USB connection. Earlier tonight I flashed a TAR file for my Galaxy Tab S without a problem. So weird. I tried different USB ports and reinstalled the drivers.
Here's what ODIN shows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU3EPD1_G920TTMB3EPD1_G920TUVU3EPD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
Click to expand...
Click to collapse
Maybe try redownloading the file and unzipping again
---------- Post added at 04:56 PM ---------- Previous post was at 04:54 PM ----------
BigDaddy38 said:
Maybe try redownloading the file and unzipping again
Click to expand...
Click to collapse
What Odin Are you using?