ok told my father i would put a custom rom on his sch-i800. I'd done this many times on my devices...i could not obtain root while on gingerbread so i went back to factory stock. Now the tab downloads the update upon first boot, but the update fails, and i don't get to see the error message. When i try to run the update from the zip card, it fails
script aborted (no error message) E:Error in /mnt/sdcard/update.
zip
(status 7)
Installation Aborted.
what can i do?
another part to this i did get 2.2 rooted with superoneclick. now i can't unroot. I was to take this thing back to completely box stock what are my steps in doing this. I've read other threads on this and i've done this, but it does not go back box stock, i think there are still files that are not what they need to be and the tab still appears to be rooted.
Check your system/bin using root explorer. If you find root files delete them
Sent from my GT-S6102 using xda app-developers app
Related
Hello Everyone
I have Acer Liquid E with Andriod 2.1 Installed on it , This phone is from Rogers.
I was trying to upgrade to 2.2 I downloaded from Acer site. It start upgrading but stop in between. Please help and guide me what should I do.
Thanks in Advance for your help
Rajeev
What's the error message?
Sent from my Liquid using XDA App
piffe said:
What's the error message?
Sent from my Liquid using XDA App
Click to expand...
Click to collapse
There is no error message it just show ! in triangle
You have to wait for 6-7 minutes to complete the process. Be sure liquid is fully charged and debug usb is activated.
Keep in mind you cannot update liquid with liquid e roms.
Sent from my Liquid using XDA App
Thanks for you reply, I just want to add that I am trying to upgrade it through application being on SD card and by pressing camara button + down vol then power button, My Acer had Liquid Galaxy 2.1 , kernel Version 2.6.29-phh
You can't install in recovery mode cause it's not a zip file, it's a bin file. You need acer download tool, then youhave to put the recovery back gain.
Sent from my Liquid using XDA App
piffe said:
You can't install in recovery mode cause it's not a zip file, it's a bin file. You need acer download tool, then youhave to put the recovery back gain.
Sent from my Liquid using XDA App
Click to expand...
Click to collapse
Upgrade I downloaded has two files
1. Acer_LiquidE_1.100.03_PA_ROG
2. UPdate.zip
and as per instruction provided I need to use Recovery mode to install Update
I Just found the error it says
Assert Failed: getprop("ro.build.display.id") " Acer_liquidE_1.100.03_pa_prog"
E: error in /sdcard/update.zip
(status 7)
Thanks for you input
Regards
Any solution for this? I have fido liquid e but malez is conflicting and gives assertion error
rajubhayana said:
Upgrade I downloaded has two files
1. Acer_LiquidE_1.100.03_PA_ROG
2. UPdate.zip
and as per instruction provided I need to use Recovery mode to install Update
I Just found the error it says
Assert Failed: getprop("ro.build.display.id") " Acer_liquidE_1.100.03_pa_prog"
E: error in /sdcard/update.zip
(status 7)
Thanks for you input
Regards
Click to expand...
Click to collapse
delete the update.zip file or remove it from your SD Card and run the Acer DownloadTool again. AcerTool flashes a .bin file if you are using it correctly.
Just upgraded my Liquid E to 2.2. I followed the instructions in the PDF and it worked fine. I would try copying the files to the SD card again.
I'm totally lost on this. I have 2.1 stock with Malez recovery installed on it. No matter what I do, I just cannot get it to work?
Is there a step by step instruction on how to "flash" a bin file and then upgrade it for Fido phone? I have Acer Liquid E Fido. I have been working on it for 2 days now and cannot get it to work.
edit: finally got it to work by installing another (10 different) version first and reinstalling a one that doesn't have the assert
hurric said:
I'm totally lost on this. I have 2.1 stock with Malez recovery installed on it. No matter what I do, I just cannot get it to work?
Is there a step by step instruction on how to "flash" a bin file and then upgrade it for Fido phone? I have Acer Liquid E Fido. I have been working on it for 2 days now and cannot get it to work.
edit: finally got it to work by installing another (10 different) version first and reinstalling a one that doesn't have the assert
Click to expand...
Click to collapse
Hey can u tell me which one u used i keep getting the same error
go to modaco forums and posts by alan090 and he's got a version that you can install.
rajubhayana said:
Upgrade I downloaded has two files
1. Acer_LiquidE_1.100.03_PA_ROG
2. UPdate.zip
and as per instruction provided I need to use Recovery mode to install Update
I Just found the error it says
Assert Failed: getprop("ro.build.display.id") " Acer_liquidE_1.100.03_pa_prog"
E: error in /sdcard/update.zip
(status 7)
Thanks for you input
Regards
Click to expand...
Click to collapse
Sorry, but you can not install the acer rom. Because you are not using original rogers eclair, or you've flashed Malez recovery.
There is a couple ways you could get around this.
1. There is a Modified rom based on the official acer release at Modaco.com. It doesn't make any assert checks.
2. If you have the original rogers eclair kickin around you could flash it onto your device. You might need to flash a 2.1 eclair bin(leak) first depending on what you're running now. Once this is done you'll be able to use the acer official, and pass all assert checks.
Spice MI 300 :- Want to update from 2.1 to 2.2
Hi every one
i have a spice android phone MI-300 and want to update the 2.1 version to 2.2 manually could anyone of you guide me how to do it on my own as I dont think the company is upcoming with and 2.2 upgrade.
Please help
Abhishek
The simplest way of doing it would be flashing the latest malez recovery. Then using acer download and flashing the proper generic 1.0 rom. After then you should have went to acer website and downloaded a european (generic 2.2 rom) followed directions and did the proper upgrade. You can also apply the patch after (under patches tab)
Worked like a charm for me back in the day.
I have been trying to root my phone and seem to be having problems. I have searched and found some people having the same problems but could not find an answer.
I tried using AIO Captivate Toolbox 3.0 and when it reboots in recovery and I click on reinstall packages I get this error..
signature verification failed. Installation aborted
I tried super on click and it says its rooted and there is an superuser icon on my phone but when it asks to test to see if its rooted and asks me to check my phone, nothing happens. I then install rom manager and thats installs fine and I can install Clockwork Recovery but when I get it to boot in recovery it just brings me back to the recovery 3e and I will try to reinstall packages again and it gives me this error..
e:failed to verify whole-file signature
e: signature verification failed
So I dont know what Im doing wrong. I had a Sony xperia x10 and im use to flashing and installing roms on that. This phone is much different lol
ottawadad34 said:
I have been trying to root my phone and seem to be having problems. I have searched and found some people having the same problems but could not find an answer.
I tried using AIO Captivate Toolbox 3.0 and when it reboots in recovery and I click on reinstall packages I get this error..
signature verification failed. Installation aborted
I tried super on click and it says its rooted and there is an superuser icon on my phone but when it asks to test to see if its rooted and asks me to check my phone, nothing happens. I then install rom manager and thats installs fine and I can install Clockwork Recovery but when I get it to boot in recovery it just brings me back to the recovery 3e and I will try to reinstall packages again and it gives me this error..
e:failed to verify whole-file signature
e: signature verification failed
So I dont know what Im doing wrong. I had a Sony xperia x10 and im use to flashing and installing roms on that. This phone is much different lol
Click to expand...
Click to collapse
I had the same issue and I found this solution. Worked like a charm:
http://forum.xda-developers.com/showthread.php?t=833423
Download the 3e_recovery_installer.zip file only and unzip.
Put your unit in Debugging mode and connect to the USB cable on your PC
Run the Install.bat file from DOS prompt and wait.
A temporary root will be performed (Doesn't matter if you're rooted or not, I was already rooted and had no issues)
Once completed, reboot into CWR. You will probably get the standard recovery screen. Select Reinstall Package and let it go. Select Reboot. (If the machine boots to the OS, go back to Rom Manager and reboot to CWR again to test.)
If the E3 Recovery screen comes up again, select Reinstall Package again. (Yes, you have to do it twice!)
As soon as it's done the CWR screen will pop up. From here on out, it should work as normal when selected from the Rom Manager app.
Hope that helps,
Now if someone would just post the Captivate AT&T default Notification sounds for me, I'd be a happy camper! I miss my old sounds!
-maj
Are you running stock froyo? There is a fix for sign verification error in vibrant forums. Search it. I am on xda app or would have given you the link
Sent from my SGH-I897 using XDA Premium App
viny2cool said:
Are you running stock froyo? There is a fix for sign verification error in vibrant forums. Search it. I am on xda app or would have given you the link
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Umm I believe the link I posted above is to that exact thread you are referring to. I am running the captivate with the Stock (upgraded) 2.2 rom and this worked perfectly for me. Just follow the instructions.
-maj
Thanks. I will try that and let u know how it goes and yes im running stock 2.2
Sent from my SAMSUNG-SGH-I896 using XDA Premium App
Thanks for all the help. It worked and now my phone reboots in the proper recovery.
ottawadad34 said:
Thanks for all the help. It worked and now my phone reboots in the proper recovery.
Click to expand...
Click to collapse
Glad I could help.
-maj
It won't work for me, I'm on stock 2.2 (already rooted) and when Itry it I get:
"The system cannot find the patch specified"
"Temp root failed! install cannot continue"
Any idea how to make it work??
EDIT: My bad.. Wasn't doing it correctly lol - I wouldn't suggest this to a newb tho ^^
Hi guys,
I've been having some issues while trying to update my gt-i9000m from gingerbread 2.3.3 to ICS.
I have rooted my phone successfully, at least I think I have as I was able to install super user/busy box/ROM Manager.
Whenever I attempt to enter CWM via the app I am still sent to the default Android system recovery <3e> screen and I receive an error saying E:failed to seek in /cache/update.zip (Invalid argument) E: signature verification failed and am unable to continue with flashing ICS onto my phone. If I attempt to CM9 from there I also receive a signature verification error.
I suspect this may have something to do with Super User failing to retain updates to the SU binaries. When running the update I am told that the update is successful and when I check I see that the latest version of the binary had in fact been pushed to my phone after restarting my phone these updates seemed to have disappeared.
Does anybody have an suggestions as to how I could continue with this update? I am using a rooted UGKG3 kernel to attempt the above.
Please let me know if I can provide any additional information...
You can try using finding a jw4/5/6 official firmware on xda and flashing it, probably ramad's thread. After letting it boot up, then try midnight gingerbread kernel via odin. From midnight's recovery, then try flashing the cwm flashable ics rom. Make sure to back up efs, sd card, and app data via titanium backup or something. Sorry, can't find links for you, on phone.
Sent from my GT-I9000 using xda app-developers app
ikuba said:
Hi guys,
I've been having some issues while trying to update my gt-i9000m from gingerbread 2.3.3 to ICS.
I have rooted my phone successfully, at least I think I have as I was able to install super user/busy box/ROM Manager.
Whenever I attempt to enter CWM via the app I am still sent to the default Android system recovery <3e> screen and I receive an error saying E:failed to seek in /cache/update.zip (Invalid argument) E: signature verification failed and am unable to continue with flashing ICS onto my phone. If I attempt to CM9 from there I also receive a signature verification error.
I suspect this may have something to do with Super User failing to retain updates to the SU binaries. When running the update I am told that the update is successful and when I check I see that the latest version of the binary had in fact been pushed to my phone after restarting my phone these updates seemed to have disappeared.
Does anybody have an suggestions as to how I could continue with this update? I am using a rooted UGKG3 kernel to attempt the above.
Please let me know if I can provide any additional information...
Click to expand...
Click to collapse
What kernel did you use to install recovery?
I remember reading back when, don't bother with ROM manager for anything. Getting into the right(?) recovery and having to change zip names....
And presumably you've seen this thread:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
First. I think you need flash clockworkmod recovery, it help you flash a Custom rom
Gửi từ GT-I9001 của tôi bằng cách sử dụng Tapatalk 2
nyloncrack said:
What kernel did you use to install recovery?
I remember reading back when, don't bother with ROM manager for anything. Getting into the right(?) recovery and having to change zip names....
And presumably you've seen this thread:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
Click to expand...
Click to collapse
I had not seen that thread, I'll try it out thanks!
EDIT: Problem solved!
Hi all,
I just tried to install CWM Recovery on a Samsung Galaxy GT-I9000, and it didn't work.
The phone was (originally) running under Android Froyo (2.2), and unrooted. First of all, I used UnlockRoot to root it, and it worked fine. I checked the root access right after using dedicated apps (rootChecker, sdMaid, etc), to confirm.
Then I wanted to install a ClockWorkMod recovery. I followed this guide (on the CyanogenMod wiki). I downloaded and installed Kies to have the USB drivers installed. Then I downloaded Heimdall (my computer is running under Windows 7) + hardcore CMW Kernel. I booted into download mode, then installed the driver. (Step 2 on the tutorial). Then next step was flashing the kernel. It suceeded, and the phone powered off. Turning it on, it just starts to make endless boot loops. The system won't start running, and it is not possible to access to the CWM recovery menu. But the download mode is still available.
So, does anyone have pointers to help me fix this issue ? i would like to have CMW installed, and then install a custom ROM (the latest Jelly Bean based Cyanogenmod release).
Thanks in advance.
Just try again installing stock Rom with odin
See my post Here
http://forum.xda-developers.com/showthread.php?t=1994759
Hi Donovan,
Thanks for the swift answer. And yes, it definitely worked. I downloaded this stock rom, and I flashed it successfully with Odin v3 1.85. I am running now under Android 2.3.6, but I lost the root access. Rooting it won't be a problem, hopefully. I still have access to the download mode, and to the stock recovery. I'll try once again to dive into the ClockWorkMod Recovery, and then install a Jelly Bean rom.
I'm hitting the thanks button right after posting this.
Thanks back at ya. Cf root you can find here
http://forum.xda-developers.com/showthread.php?t=788108
Dont forget the wiping before flashing jb.
Most times u have 2 flash custom twice.
If first time hangs just pull battery out, get in recovery & flash second time or third if its needed.
If it says install completed then its done
Much pleasure flashing the i9000
Actually, I spoke to fast, the problem just got much worse.
Okay, just after flashing the stock rom (2.3.6), everything was fine. Then I downloaded the latest stable CM10 (direct link).
I booted into recovery mode (CWM Recovery,actually) and I did try to install (i din't not forget wiping data/cache, dalvik and batt stats), but it failed, saying the package was incorrect. I tried many times, copying again and again the zip file, same problem.
Then I downloaded a previous version, CM9. I tried to installed it, and i run into a very weird error, saying an assertion failed when trying to install the package.
Something like;
assert failed: getprop("ro.product.device") == "galaxys" || getprop ("ro.build.product") == "galaxys" ... getprop ("ro.build.device") = GT-I9000 etc...
Click to expand...
Click to collapse
And then installation program aborts (error code 7.)
My assumption, is that it looks like my phone is no longer being considered by a samsung gt i9000, according to the installer. Weird, though...
Now, I still have access to the recovery. But the phone can't boot, as everything was wiped. Much worse, I can switch to download mode, but i can't flash back the stock rom, Odin can't detect the phone (I tried with Odin v3 1.82, 1.83 and 1.87).
I'm getting desperate, any pointers ?
Thanks in advance!
Did u try to flash the custom more then 1 time?
Oh yes, I did it like a dozen of times.And I still get the same error.
Sent from my HTC Wildfire S A510e using xda app-developers app
gti9000 rooting
Hi Donovan, could you help me please:fingers-crossed:
I've purchased a unlocked galaxy s gti9000 and I want to root it. Something I've never done on any phone as I'm a complete noob. I managed to install XWJW1 FIRMWARE. I've now got as follows PDA:I9000XWJW6
PHONE: I9000XWJW1
CSC: I9000XSAJV8.
All the links to the file for rooting seem to be dead. I've found some for rooting XXJVU, But that's not right is it? I would really like to try ICS or Jelly Bean. I must admit I'm nervous about this as it's taken me a while to get a phone as good as this one!! Any help would be greatly appreciated. Thanks in advance
@Nooga:There is a very complete and straightforward guide here (http://forum.xda-developers.com/showthread.php?t=1852546). You might want to take a look at it.
Now can we please come back on my topic ? Thanks!
Sent from my HTC Wildfire S A510e using xda app-developers app
Thanks
Roland_Y said:
@Nooga:There is a very complete and straightforward guide here (http://forum.xda-developers.com/showthread.php?t=1852546). You might want to take a look at it.
Now can we please come back on my topic ? Thanks!
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Thanks Roland will give it a try tonight.
Well, that is now solved. I tried something silly that ended up working fine.
As the cm9-smtd update package couldn't run (because of the assertion fail), I just opened the zip package, then edited the file META-INF/com/android/google/updater-script.
I basically removed the assert statement at the top of the file.
CMW recovery installed it properly, without any err. I now have an ICS based rom (Cyanogen Mod 9).
Problem definitely solved now. Going to make a Nandroid backup.
Thanks all, again.
I have a Droid 4 on Verizon ICS. Had Safestrap v3.05 TWRP v2.2.2.1. Removed Safestrap app but safestrap screen appears when booting and the menu is still functional. Still have OTA Root Keeper and it is unrooted and saved. Booted into recovery and tried to apply update from sdcard with the new Blur_Version.6.16.217.xt894.Verizon.en.US.zip.
Get assert failed: apply_patch_check("/system/bin/logwrapper", "f39fcb2d78b9e92e9fbedc6a62a047dc23459416", "4a63fec78956def045b442910a753fa640db8f5a")
E:Error in /tmp/sideload/package.zip
(Status 7)
Instalation aborted.
I tried to follow a Droid razors post on a similar error but could not figure out. What files I need to hunt down and delete? Must have missed some important steps along the way. I could use some help sorting this out.
Thanks for your help.
dsrock said:
I have a Droid 4 on Verizon ICS. Had Safestrap v3.05 TWRP v2.2.2.1. Removed Safestrap app but safestrap screen appears when booting and the menu is still functional. Still have OTA Root Keeper and it is unrooted and saved. Booted into recovery and tried to apply update from sdcard with the new Blur_Version.6.16.217.xt894.Verizon.en.US.zip.
Get assert failed: apply_patch_check("/system/bin/logwrapper", "f39fcb2d78b9e92e9fbedc6a62a047dc23459416", "4a63fec78956def045b442910a753fa640db8f5a")
E:Error in /tmp/sideload/package.zip
(Status 7)
Instalation aborted.
I tried to follow a Droid razors post on a similar error but could not figure out. What files I need to hunt down and delete? Must have missed some important steps along the way. I could use some help sorting this out.
Thanks for your help.
Click to expand...
Click to collapse
Its been posted all throughout this forum numerous times. Download ICS utility and ICS files and fast boot complete stock image. And please read before posting?
Sent from my DROID4 using xda app-developers app
rruleford said:
Its been posted all throughout this forum numerous times. Download ICS utility and ICS files and fast boot complete stock image. And please read before posting?
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Sorry I missed the STICKIES. Thanks for the info, though. It took some extra effort to get my phone to go back to stock even using the utility. But once back there, I got the OTA to install. Now, working on getting the new exploit to re-root it.
:good: