Related
Hi, so i successfully flashed my phone with JPA and wanted to install the CF chain root. unfortunately while flashing it got stucked at zimage. so i turned off my phone (removed the battery) and tried to reflash.. same thing happened. I tried reflashing back to JPA and im stuck at the S logo.. tried reflashing back to JM6 and same thing.
When i try to go to recovery mode, i keep getting this connect to pc image. When i connect my phone to the pc nothing happens, Odin cant see my device either. Please any help would be greatly appreciated!
you could try the homemade jig from this thread:
http://forum.xda-developers.com/showthread.php?t=819551
helped me to get into download mode, when i bricked my phone with 3 button mode disabled.
hope that helps.
I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
i'm having the same problem, i was running darky's v8 then i did a factory reset and now it won't bootup, i can get into download mode but not into recovery mode
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
panamaggs said:
I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
Click to expand...
Click to collapse
Put it in odin flash new kernel and unplug usb then you se broken fimware then reflash
Same old story flash Darky rom and now its broke don't ask Darky how to fix it v.
jje
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
I've read all the same issue posts but none solve my problem. I can't get Odin to connect to the SG. If I put the SG in download mode with the 3 button combo, Odin won't connect. ADB also can't connect to the SG as the SG won't boot. I've tried everything suggested but it simply won't connect. I guess the SG is now a bin job. The only way to get a connection in Odin is to let the SG boot and hang then connect. Odin can see the SG but you can't do anything unless the SG is in download mode. ADB can't reboot the SG either. Something must be wrong with SBL but I can't find a way to fix it. My fingers are sore from so many 3 key combos over the last few days.
Full brick and leave it in for repair and blame on kies?
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
All the thread answers require the use of ADB and or Odin. This is the problem, I can't get the SG to connect to Odin when the SG is in download mode. Something is wrong with the SBL so the download mode isn't working. If I could get the download mode fixed the rest is easy. The only time Odin can see the SG is when I let the SG boot normally and it hangs. Then I connect the USB and Odin sees the SG. As it is not in download mode, Odin can't send anything. ADB gives an error that it can't connect to the device so I can't use ADB to put the SG in dl mode. To summarize, I can only get the SG to either hang on boot or go into a faulty dl mode with the 3 key combo.
Sounds more like a USB problem. Change USB port and or remove and reinstall Kies/USB drivers .
jje
so you could never get into recovery mode or only after he did a reset?
if it's not a usb problem as suggested above then i agree with "Full brick and leave it in for repair and blame on kies?", if they can't get it in dl mode or recovery either they won't know what you've done to it, or they might, so leave that as a last option
Ok i put my device into download mode with picture then flashed my i9000 with http://forum.xda-developers.com/show....php?t=1160580
i now know this was the wrong FW for my device since then i cannot boot my phone normally nor get into download mode with the picture
it works fine just if i pull battery or turn off the phone
all i get is a black screen with "home & back buttons lit up"
however when i attach my device to odine it recognizes the phone first time
i dont have to do anything, i've tried flashing stock FW
same result black screen buttons lit up no DL mode with pic no boot
i've tried flashing FW with sbl success odine tells me,
no luck again, also when i try to flash 3 files
it always hangs then fails on modem, however if i flash allinone it works
but only boots with odine & not on its own & without samsung boot image
i can flash modem on its own via psa tab with success, i've also tried the jig to get into normal DL mode, but to no avail
also when i plug usb cable in & take out battery phone turns off
its like the usb is not a power source, ive tried on my laptop, ac adapter & pc all same result
to summerise:
i can flash my phone however if i turn off device i it will not boot
on its own & have to reflash via odine but with no boot logo only sounds
im thinking the only solution is samsung service centre but i can hazard a guess the price of a new mobo will prob be the same as the phone its self secondhand on ebay
any ideas? thanks
P.S when i flash 2 or more files i use pit 512, what if i didnt use a pit or used a different one would it make a difference?
P.P.S kies does recognize device once its flashed but cant find any updates on FW
would doing an emergency restore with an .sbu file fix this boot issue?
& where could i get an .sbu file from as i didnt do a backup
Did you also check “repartition“ in odin when you flash with the pit file?
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
In fact if you can't go into DL mode you can use a thing called JIG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Unbrickable mod will fix it.
liraindon said:
Did you also check “repartition“ in odin when you flash with the pit file?
Click to expand...
Click to collapse
odine automatically clicks re-partition when i check a pit file
ansonscleung said:
In fact if you can't go into DL mode you can use a thing called JTAG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Click to expand...
Click to collapse
is this not similar to a jig?
rax22 said:
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
Click to expand...
Click to collapse
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
stevo-p said:
is this not similar to a jig?
Click to expand...
Click to collapse
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
does anyone have a basic .sbu file with no data on that i could use with kies?
would it work?
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
You're correct, guy. A JIG cost about HK$15.5 ($15 for a Micro USB port and $0.5 resistor) (approx. US$1.99 €1.5 not incl. transportation fee) or spend US$8 here.
Hope you can pass through those stuff and enjoy back your phone!
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
already tried jig, no affect, also i cannot getinto recovery mode also
im assuming im already in download mode as odine recognizes my phone
but i have no pic on phone
Unbrickable mod will fix it.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
rax22 said:
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
Click to expand...
Click to collapse
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
woolf clubs said:
Unbrickable mod will fix it.
Click to expand...
Click to collapse
i've researched that method, i know little about soldering
and asked in a phone shop & they knew nothing about it
so i wouldn't attempt it as i would probably screw it up
stevo-p said:
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
Click to expand...
Click to collapse
also i just re-flashed with darky rom same as before "boot loop with pic & welcome to darkyrom 10.2 extreme edition" so turned off phone
thinking great i finally got a pic on boot......no
turned phone on no pic no sound black screen with buttons lit up
nothing else
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
UPDATE*
i've flashed my phone with
PIT: 512
PDA: PDA_XWJVZ_Sbl.tar
PHONE: PHONE_XXJVT.tar
CSC: CSC_OXXJV9.tar
KERNEL: Semaphore_kernel_JVT_1.8.0.tar
I now have the download mode pic so im thinking great
color is abit off but atleast i had the startup samsung logo
fantastic just turned off phone rebooted it
back to square one, black screen bottom 2 buttons lit up?
Fallen04 said:
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
yes multiple stock fw's all work until i turn off device
then try turn on black screen 2 buttons lit up
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
IT'S EASY!
ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Download mode still work? why you no flash it to previous stock ROM then?
ljcrisanto said:
IT'S EASY!
Click to expand...
Click to collapse
Dafuq dude. You saying easy without giving solution, you dum* b*tt ! Your Mini are bricked too right ? While you asking are there is anyone said IT'S EASY ! like you did ? Heh... n00bies are trying to be a Master without having any knownledge.
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
If the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...
I cannot get the files
Originally Posted by shwe
the download mode still works then it is easy to do ....
Go to this page
Select Type [Smartphone]
Select OS [Android]
Select Model [your phone model]
Select Country [your country]
Then click on SEND
The page will show you current firmware and additional files ...
Download firmware ....
Download flash program from additional files ...
Then flash it ...
Click to expand...
Click to collapse
I cannot find the files to flash!
dxkpd
http://droidangel.blogspot.com/2011/05/samsung-galaxy-mini-s5570-original.html
Did it work?
Thanks but it failed even if i tried with odin and so samething happens
Zunmun said:
I cannot find the files to flash!
Click to expand...
Click to collapse
U need to register to see the Firmware and flashprogram download link ....
Zunmun said:
Thanks but it failed even if i tried with odin and so samething happens
Click to expand...
Click to collapse
can u tell little more details on what really happen ...?
What really happened
shwe said:
U need to register to see the Firmware and flashprogram download link ....
can u tell little more details on what really happen ...?
Click to expand...
Click to collapse
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post
thats the download mode with different screen
just connect and flash a 4 package file with odin
Try this Odin 4.42
download from here bit.ly/URolWT oh wait, don't download from there ... that's for UK stock roms ... wait I'll find for your country.
---------- Post added at 11:12 AM ---------- Previous post was at 11:04 AM ----------
Singapore stock rom bit.ly/URq9iz
asc1977 said:
I want to flash my gt-s5570i with original stock rom from sammobile with odin. But i have only a *.md5 file and odin wants more. Use odin 1.84
Can someone show me the way how. In the moment its bricked and didnt start.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
For GT-S5570i, only Odin version 1.84 and 1.87 can detect the phone.
Unfortunately both version doesn't have the one package option to flash ....
So u need to split the original md5 file into PDA, PHONE and CSC 3 package files.
As the splitting md5 file is quite complicated just download following 3 files,
all this files were used to flash my GT-S5570i
(split from Original Samsung Firmware Android 2.3.6 released on October 2012) ...
For PDA
Download this
For PHONE
Download this
For CSC
Download this
For Flash Program & pit file
Download this
Don't forget to UNCHECK the Re-partition box.
If u want your country firmware to be split then give me your link.
I will split and upload it for u.
try to recovery by odin.
bielphc said:
try to recovery by odin.
Click to expand...
Click to collapse
Hey, n00bs. Don't fool people by your half knownledge.
He already tried that. CAN YOU EVEN READ THIS TEXT !?
Zunmun said:
You know from the first post, the galaxy mini just kept showing that comupter to phone screen as shown before mentioned in the first post
Click to expand...
Click to collapse
If u access download mode, flash stock rom, (donwload one from http://forum.xda-developers.com/showthread.php?t=1551586 and flash) If it fails. Check your samsung drivers, thats often a reason why it fails, but i suppose u have them. Don't stop the flashing process until the odin says Pass in a blue box. If flashing fails even then.... its service center or if u can, use a usb jig. That's all i can think of..
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Full wipe and flash again with odin downloader..
Zunmun said:
Galaxy Mini Bricked after flashing Wrong CWM (There is a froyo one and a gingerbread one I suppose? http://forum.xda-developers.com/showthread.php?t=1342190)
First I flashed CWM arcording to this thread as i cannot get rom manager to work?
Then I rebooted my phone into recovery mode via adb again.
Volia, I got my phone bricked, stuck in the glorious samsung logo never to move on. Not able to access recovery.
I then followed this thread and reinstalled the CWM for froyo.
Odin then failed. Reboot show a samsung logo followed by a computer to phone screen.
Tried flashing oem gingerbread but took to long so powered it off.
Samething still happens.
Tried One click unbrick
Samething
Download mode still works
Anybody can help?:crying:
Click to expand...
Click to collapse
Flash new rom
Download
1.odin multidownloader
2.Samsung phone usb driver
3.Firmware
Visit http://samfirmware.com
Register to forum and you.can find them
Sent from my GT-S5570 using xda app-developers app
If ODIN doesn't work turn on your phone put it on the ground and pray until is working.
Boooooooo!.....did I scared you?
Hi all,
I was running Custom ROM on my Galaxy Note 5. (Minosauras ROM v10)
Suddenly today morning the display was garbled with coffee stain pixels and while tried powering on I also had vertical glitch.
No recovery , no download mode
I tried connected to ODIN. I could do it.
Downloaded Stock firmware and flashed it.
Alas ! No chance of life.
a) can anyone give me PIT file for Indian version 32GB.
I tried using N920G UUB and ZTO pit file.
Now I have problems flashing system.img which clearly means I have been using the wrong pit file.
Can anyone support me out of this hard brick ?
prabhu1980 said:
Hi all,
I was running Custom ROM on my Galaxy Note 5. (Minosauras ROM v10)
Suddenly today morning the display was garbled with coffee stain pixels and while tried powering on I also had vertical glitch.
No recovery , no download mode
I tried connected to ODIN. I could do it.
Downloaded Stock firmware and flashed it.
Alas ! No chance of life.
a) can anyone give me PIT file for Indian version 32GB.
I tried using N920G UUB and ZTO pit file.
Now I have problems flashing system.img which clearly means I have been using the wrong pit file.
Can anyone support me out of this hard brick ?
Click to expand...
Click to collapse
Don't worry about flashing stock just re flash your twrp recovery and then go from there.
MrMike2182 said:
Don't worry about flashing stock just re flash your twrp recovery and then go from there.
Click to expand...
Click to collapse
No recovery ; No download mode.
Can connect to ODIN on a blank screen. Very hard brick !
With TWRP --> Black Screen with recovery enabled. No touch or whatsoever due to blank screen.
Need the pit file for Indian N920G Marshmallow ROM.
prabhu1980 said:
No recovery ; No download mode.
Can connect to ODIN on a blank screen. Very hard brick !
With TWRP --> Black Screen with recovery enabled. No touch or whatsoever due to blank screen.
Need the pit file for Indian N920G Marshmallow ROM.
Click to expand...
Click to collapse
What does 'No recovery; no download mode' even mean? Pit file doesn't fix the bricked phone but correct the pit(csc) mapping. Do you exactly know how to get into download mode though? If your display has been damaged, it still can get into download mode by the correct button combination.
Konsstantine34 said:
What does 'No recovery; no download mode' even mean? Pit file doesn't fix the bricked phone but correct the pit(csc) mapping. Do you exactly know how to get into download mode though? If your display has been damaged, it still can get into download mode by the correct button combination.
Click to expand...
Click to collapse
Hi , The problem is the display is garbled and the LED was showing various colors.
I tried recovery button combination to force into recovery. It didnt work.
I tried download mode (No download symbol)
But got a attachment to ODIN (COM 1: Blue)
I assumed that the bootloader is corrupt and loaded entire firmware through ODIN.
Everything was OK. But no display yet.
I tried starting using power button (Nothing on display)
Now I try PIT file.... System.img failed flashing.
Tried loading TWRP recovery; adb found 2 devices a) Device b) Recovery
Tried using Heimdall.
Now ODIN fails after using pit file once which failed.
Mine gets detected in ODIN and that is all the life it has.
prabhu1980 said:
Hi , The problem is the display is garbled and the LED was showing various colors.
I tried recovery button combination to force into recovery. It didnt work.
I tried download mode (No download symbol)
But got a attachment to ODIN (COM 1: Blue)
I assumed that the bootloader is corrupt and loaded entire firmware through ODIN.
Everything was OK. But no display yet.
I tried starting using power button (Nothing on display)
Now I try PIT file.... System.img failed flashing.
Tried loading TWRP recovery; adb found 2 devices a) Device b) Recovery
Tried using Heimdall.
Now ODIN fails after using pit file once which failed.
Mine gets detected in ODIN and that is all the life it has.
Click to expand...
Click to collapse
If you used an incorrect PIT file when you really didn't need to then you probably corrupted your entire partition table..
MrMike2182 said:
If you used an incorrect PIT file when you really didn't need to then you probably corrupted your entire partition table..
Click to expand...
Click to collapse
Yeah I understood that.
Now I need the correct pit file for my ROM to repartition it.
Should I repartition through dd tool only ?
Anyhow since my patience went away, I threw it down a service center.
Service center called me up and said display is back, but couldnt restore my note.
Calls for mother board change ! So I got it thrown back to me !!
It seems now my display is back , can anyone help me in getting my note repartitioned ?
R Prabhakar