Database Develop

[Q] Stuck at logo screen....help

I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please

mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!

Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???

After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.

Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....

I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???

I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps

Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.

Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje

mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone

gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.

JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes

tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?

2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.

I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?

I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm

I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...

Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?

Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje

Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...

[Q] internal SD problem?

Hey guys, i need some help, its rather urgent.
I was trying to do a lag fix. It said it didn't work, and proceeded to restart.
went to the i9000 screen for 3 second, and just kept restating. can't get into recovery anymore. i got into download mode, and tried to flash back to stock with odin. odin said everything worked, but its still stuck in the same boot screen loop.
Any ideas? Is it the internal SD card? It is a bell i9000.
Thank you in advance.

Most dedinately the infamous corrupt SD issue. You're on 2.2 which is why it loops at the i9000m screen. If you flash 2.1 it will get to the glowing s screen then the screen will go black and it will stay like that.
You need to take it in for repair. There are many threads on this issue and other user experiences with the repair process
Sent from my GT-I9000 using XDA App

hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it

Anyone try the above post? Does it work out for anyone else?

Ok Thx, trying it out right now

Hisho2050 said:
hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it
Click to expand...
Click to collapse
I just tried it. Didn't work I guess I have to send in for repair.

13a said:
I just tried it. Didn't work I guess I have to send in for repair.
Click to expand...
Click to collapse
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.

Rumble6059 said:
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.
Click to expand...
Click to collapse
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.

13a said:
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.
Click to expand...
Click to collapse
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt

No, I have not. I will give it a try tonigt with the re partition. Thx.for the suggestion.
Sent from my SGH-I897 using XDA App

Rumble6059 said:
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt
Click to expand...
Click to collapse
Just tried it. didn't work. Thx tho.

[Q] help needed: problems to upgrade from 2.1 to 2.2

background: i have an international i9000 galaxy s.
and my problems are:
im on my way to upgrade from 2.1 to 2.2 using odin.
downloaded all the needed .tar and all that.
but after installation finished, my phone wont start up and only stuck on the first screen, showing galaxy s gt-i9000
only then i realized that i did not uninstall lag fix from my previous installation.
so i gonna need a big advise from the pro's to help me.
i was really tired on searching the solutions for my phone (the whole day today)
please, help.

http://www.multiupload.com/PUSOOBQ8K5 this is froyo 2.2.1 flash it thru odin with all 3 files and 512 pit (included) and check the repartition box on odin. when thats done give the phone plenty of time to boot (10mins should suffice) then when thats done upgrade to a newer version (the one in the link is JPU)

i will give it a try (downloading it)..
I had tried to reflash it using odin to jm8, it will say on the android recovery
E:can't mount /dev/block/stl11
(invalid argument)
am i in a bigger problem?

i dont think so no... just flash the above firmware make sure you use PIT and RE-PARTITION they are essential.. then report back as to whats happened

okey.. still downloading it..
its kinda slow because i dont have megaupload or any downloading accounts.. hope u can wait coz i will surely report back.
additional info:
my phone does not have 3 button combo for recovery and download mode..
so i just made myself a home-made jig to make my phone run on download mode

does the jig work ?? have you never had the 3 button combo

the jig: perfect! =) it worked just like it should if u seen it on the net or youtube
the 3 button combo : need to root first, then use the 3 button combo fix.. then i will have the 3 button combo.. but if had to be rooted 1st, so how can i root if i cannot pass the boot menu?? hehe.. so jig is the answer..

mate, i just finished downloading the file u recommended, but it ask for password.. do u have the password?

samfirmware.com i think

on to it!!
installed JPU using odin and right now its rebooting..
do u mean that 10 minutes to boot (while it stuck on the s boot screen)?
so now i just have to leave it? then i will report back in 15 minutes.
hope this work..

the screen turn black after a while showing the s boot logo..
the sometimes its vibrating.. is that normal?

its not normal but there is life in your phone so all is not over yet...
did you use pit and re-partition ?? also Kies wasnt running on your pc was it ?? even in the icon tray ??
another thing.. you did try JM8 right ?? did you use pit and re-partition with that firmware aswel ?

i used pit 512 and tick re-partition on both JM8 and JPU..
i dont install kies but i have the driver for the galaxy s and working fine on 2.1.
i hope there is still life on my phone.. please help me make it awake.. really counting on you and any1 who can help..
most of all, thanks because still spending ur time on noobs like me =)

i will be here all night if i have to... your phone is gunna live im gunna make sure of it lol. im just having a toot thru the threads to find some alternative methods.
In the meantime have a look thru this http://forum.xda-developers.com/showthread.php?t=818556
Also when you did the JPU method is this how you did it ??? http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7

guest what, my phone now have 3 buttons combo!!
in recovery mode, i wipe data/factory reset
then wipe cache partition
then format internal sd-card..
do i have to apply sdcard:update.zip??
while the screen is black after stuck in s boot screen, the two buttons that is menu and back buttons turn on its light..
any ideas?

no apply update:zip is just to install signed zips like CWM. did you do full reset in recovery ?? is it still not booting ??? and is it still vibrating

how are you getting on ?? im on the edge of my seat here

i did the full reset in recovery..
it still not booting and still vibrating.. hurm.. can you teach me how
- to speedmod kernel using odin with suitable file to be downloaded?
while im downloading the how to describe whole procedures to install android 2.2.1 to samsung galaxy s..

i dont know how flashing a kernel will help but anyway. all you do is put it in odin in pda. NO REPARTITION AND NO PIT. then flash as normal in download mode.
also download stock JPY 2.2.1 what i use all the time if i have trouble. do the same in odin in pda NO REPARTITION AND NO PIT just pda. then tell me how you get on
have you read thru these ?? http://forum.xda-developers.com/showthread.php?t=926399
http://forum.xda-developers.com/showthread.php?t=818556

i fell asleep infront of my pc while downloading flip 360 clean JM9!!
sorry about that
now.. after the fresh install, it will boot into recovery and this message is shown:
E:can't mount /dev/block/stl11
(invalid argument)
i think its the internal memory, do u agree?

Phone does not turn on

Hello,
After I flashed the pit in ODIN, I restarted phone and it does not turn on anymore even when plugged. No light, nothing. I didnt flash a rom after flashing pit. What could the problem be? Short circuit?

First of all what rom are u in, can u access Download mode? [VOL DWN+POWER+HOME]
If u r in a 2.3.4 GB, try flashing a new GB kernel like semaphore. Load it as PDA in ODIN. If that doesnt work, flash a fresh rom from here - GingerReal Its got clear instructions and all the downloads. I am not sure but i think you lost ur bootloader.

DonVito2020 said:
First of all what rom are u in, can u access Download mode? [VOL DWN+POWER+HOME]
If u r in a 2.3.4 GB, try flashing a new GB kernel like semaphore. Load it as PDA in ODIN. If that doesnt work, flash a fresh rom from here - GingerReal Its got clear instructions and all the downloads. I am not sure but i think you lost ur bootloader.
Click to expand...
Click to collapse
I was on surfarce 2.3.4 rom. But after flashing with odin the pit file (and it finished flashing), I turned off the phone. Now it does not turn on at all, not even when plugged. So I cant go in download since it does not turn on. It's guess it's dead

gohabs93 said:
Hello,
After I flashed the pit in ODIN, I restarted phone and it does not turn on anymore even when plugged. No light, nothing. I didnt flash a rom after flashing pit. What could the problem be? Short circuit?
Click to expand...
Click to collapse
Remove the battery for 30min and put it back and try to switch on.

anukilimanoor said:
Remove the battery for 30min and put it back and try to switch on.
Click to expand...
Click to collapse
I tried it, it didnt work. I'll take it to the repair center and see how much it would cost to repair.

[Q] My phone is stuck in Galaxy note N7000 screen, can´t enter to recovery mode

Ok, so I Flash rocket rom on my note and when i rebooted the phone it stucks on the screen of samsung galaxy note, i can not enter to CMW mode so i can do anything...What do i do? i think i just screw up my cellphone please help me

Probably get a usb jig. Take your battery off.. Insert battery and connect jig. Your phone will boot into download mode. Then remove jig and connect your data cable and flash any stock Rom via odin
Sent from my GT-N7000

Pactalix said:
Ok, so I Flash rocket rom on my note and when i rebooted the phone it stucks on the screen of samsung galaxy note, i can not enter to CMW mode so i can do anything...What do i do? i think i just screw up my cellphone please help me
Click to expand...
Click to collapse
Try to enter download mode and then flash a stock rom with odin.

aibo said:
Try to enter download mode and then flash a stock rom with odin.
Click to expand...
Click to collapse
Well, i can enter to download mode in the cellphone, but i dont know what i have to do, sorry im a noob :/ can you explain me??

download odin for the pc and a stock rom and flash it

Pactalix said:
Well, i can enter to download mode in the cellphone, but i dont know what i have to do, sorry im a noob :/ can you explain me??
Click to expand...
Click to collapse
Go to this site http://www.sammobile.com/firmware/?page=3 and you will find Odin 1.85. Firmware for your country/region and flashguide. Register first, it`s free
It`s not so hard: download Odin 1.85, download the right firmware.
Put the firmware in PDA in Odin, close Kies and kies trayagent and PDLR in your windows toolbar (rightclick and go to taskmanager), put your phone in downloadmode, connect with computer and when you see ADDED in the left corner window of Odin and the the ID.com left upper window turns yellow press start and flash and let it boot. Done

http://forum.xda-developers.com/showthread.php?t=1160580

gee2012 said:
Go to this site and you will find Odin 1.85. Firmware for your country/region and flashguide. Register first, it`s free
It`s not so hard: download Odin 1.85, download the right firmware.
Put the firmware in PDA in Odin, close Kies and kies trayagent and PDLR in your windows toolbar (rightclick and go to taskmanager), put your phone in downloadmode, connect with computer and when you see ADDED in the left corner window of Odin and the the ID.com left upper window turns yellow press start and flash and let it boot. Done
Click to expand...
Click to collapse
The only firmware that I see for the note is the one from Honk Kong...I´m from Mexico, that matters? D:

now do little more effort, n type N7000 in search field, If you dont know it then simply
Go here http://forum.xda-developers.com/showthread.php?t=1424997

This happened to mee to once... I yanked the battery 10 minutes... Then suddenly i could get into recovery again.....try it....
Sent from my GT-N7000 using Xparent Blue Tapatalk

and i have the same problem... stuck on the SGN7000 screen with yellow triangle. ALSO can't get into recovery mode...
Hence, i was told to use odin1.85 to flash back the stock rom.... during the progress... it stuck on factoryfs.img
have did some battery pull for 5-10mins, use different pc, different usb cable... also no use.
Does that means i need to pay samsung to restore back for me?

Hello guys, even I am stuck factoryfs.img when trying to flash stock ROM.
I bricked my phone trying to install rocket ROM ICS.
I am using PC ODIN and LA5 firmware, I tired KL3 too, but no luck. I am just stuck at around 95% with odin saying flashing factoryfs.img.
PLEASE HELP

If you are able to enter recover, wipe cache, wipe delvic cache, wipe off data
then reflash

I am not able to enter into recovery. Only download mode is working, but when trying to flash the stock rom, it is stuck at factoryfs.img.

You may try different ROM
Sent from my GT-N7000 using xda premium

dr.ketan said:
You may try different ROM
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
any particular suggestion? Or should I take it to the servicing center? Would they charge me ?

happen to me once..thanx to dr. ketan n some user that guide me..like dr ketan said..u can try different rom and make sure u use the main usb port(if u use desktop)the one at the back...

anilisanil said:
any particular suggestion? Or should I take it to the servicing center? Would they charge me ?
Click to expand...
Click to collapse
Not specific, you select any different, n as balok said connect directly to usb port, n close if antivirus running. Better download rom without antivirus, some time antivirus can cause problem, if any component of rom falsely consider as trojan.
Sent from my GT-N7000 using xda premium

anilisanil said:
I am not able to enter into recovery. Only download mode is working, but when trying to flash the stock rom, it is stuck at factoryfs.img.
Click to expand...
Click to collapse
have got myself into CWM Recovery finally after flashing the FM Kernel v2 with Odin PC... BUT my previous backup (darkyROM) got errors while restoring even i wanna do a fresh flash on DarkyROM, it just stuck on halfway (symlinking....)

edwtw4u said:
and i have the same problem... stuck on the SGN7000 screen with yellow triangle. ALSO can't get into recovery mode...
Hence, i was told to use odin1.85 to flash back the stock rom.... during the progress... it stuck on factoryfs.img
have did some battery pull for 5-10mins, use different pc, different usb cable... also no use.
Does that means i need to pay samsung to restore back for me?
Click to expand...
Click to collapse
SAME HERE Spending hours but no use....PLEASE HELP!