Related
Anyone ordered from Clove?
The wireless speaker that came free was SRS BTV-5
I cannot connect to it with Xperia Z's NFC, it says "could not connect to SRS BTV-5"
I can only connect to it manually in Bluetooth......
that kinda defeat the entire purpose of NFC...is this a software problem? or is it hardware problem
+1
lijink2000 said:
Anyone ordered from Clove?
The wireless speaker that came free was SRS BTV-5
I cannot connect to it with Xperia Z's NFC, it says "could not connect to SRS BTV-5"
I can only connect to it manually in Bluetooth......
that kinda defeat the entire purpose of NFC...is this a software problem? or is it hardware problem
Click to expand...
Click to collapse
I can connect to it flawlessly with the Z or Nexus 4, did you put the switch on the bottom in the middle position to accept NFC pairing?
kchino said:
I can connect to it flawlessly with the Z or Nexus 4, did you put the switch on the bottom in the middle position to accept NFC pairing?
Click to expand...
Click to collapse
Yes, phone vibrates when i touch it with the speaker and displays "Connecting to SRS BTV5"
then 5 secs later it says "Could not connect to SRS BTV5"
through bluetooth I find ISSC SHS and connects to it perfectly but without NFC it kinda kills the product...
I also saw online a very few Bluetooth device issues from other products. I'm hoping this isn't a hardware fault...sending this speaker back to UK is gonna be painful (since US hasn't started selling these speakers yet)
I had that problem initially but it was because I had the switch on the speaker left at nfc off.
It needs to be in the middle, since then it's been working fine.
I noticed a reset hole on the bottom, could be worth trying?
I find it pretty good for its size.
DiscipleOfKane said:
I had that problem initially but it was because I had the switch on the speaker left at nfc off.
It needs to be in the middle, since then it's been working fine.
I noticed a reset hole on the bottom, could be worth trying?
I find it pretty good for its size.
Click to expand...
Click to collapse
Having the same problem - Xperia z, SRS BTV 5 and it can 'pair' but not 'connect'. Either via NFC or BlueTooth.
Switch is in middle, phone buzzes when NFC tap occurs, Bluetooth pairs, but doesn't 'connect'
Oddly phone worked find in store with larger Sony NFC speakers, eg the BTX 300.
Reset button hasn't helped.
OP - could you please display some good forum manners and update to let us know if you solved the problem (and how) or whether you returned the unit?
Since the Z1 supports Bluetooth 4.0, therefore following the Android 4.3 update - does The Xperia Z1 now support Bluetooth Smart?
What is Bluetooth Smart
Sent from my C6902 using XDA Premium 4 mobile app
Yes it does.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
ron76426 said:
What is Bluetooth Smart
Sent from my C6902 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://en.m.wikipedia.org/wiki/Bluetooth_low_energy
OK, so I borrowed a Beets BLU Bluetooth Smart Heart rate monitor and it would see the device in the available devices list occasionally (1 out of 4) but would not pair, I also borrowed a Garmin Premium HRM (ANT+) and could not get that to connect at all.
I could of course be doing something completely wrong especially with the ANT+ device as I can find no instructions on home to pair the device
instructions or help with either?
tallguy_uk_98 said:
OK, so I borrowed a Beets BLU Bluetooth Smart Heart rate monitor and it would see the device in the available devices list occasionally (1 out of 4) but would not pair, I also borrowed a Garmin Premium HRM (ANT+) and could not get that to connect at all.
I could of course be doing something completely wrong especially with the ANT+ device as I can find no instructions on home to pair the device
instructions or help with either?
Click to expand...
Click to collapse
You might just have be having the typical 290 issues with Bluetooth where devices can't pair. Maybe someone else will chime in with more feedback, but I don't have any BLE devices to test.
Ok So I managed to get the ANT+ device to work by installing ANT Radio Service & ANT+ Plugins from the play store following guidance from this website
http://www.thisisant.com/consumer/ant-101/ant-in-phones/
Which was really helpful, especially as the Z1 is slated as being ANT+ native supporting but still needs additional software drivers installed, but there is nothing on Sony's documentation to drive you to this conclusion.
As for the Bluetooth 4.0/Bluetooth Smart device still no joy - Anybody any further ideas or is it just a case of waiting for a bug fix?
Install BLE Heart Rate Monitor from store. In the settings pair with your HRM. Don't try and pair through phone bluetooth settings. Bluetooth smart isn't designed to be paired like this apparently.
SeanyC said:
Install BLE Heart Rate Monitor from store. In the settings pair with your HRM. Don't try and pair through phone bluetooth settings. Bluetooth smart isn't designed to be paired like this apparently.
Click to expand...
Click to collapse
Thanks for the info - partially works, connects but drops the connection routinely even after refreshing the Bluetooth system , as suggested by the app - probably needs a bug fix
This happens sometimes unfortunately. I had no problems on my Nexus 4.
I would like to understand whether it's possible to activate bluetooth 4 and bluetooth "classic" individually. The background: I want to use a bluetooth 4 tag in combination with tasker to automate certain things once the tag is within reach. I got a Texas Instruments SensorTag which is recognized by the Z1 and can be accessed via the TI software. Tasker is currently being improved to play with BT4 devices. The issue is that there is just a single bluetooth switch within Android, but of course I want to avoid the power hungry classic bluetooth and use bluetooth instead.
Any ideas if there is a solution? Maybe via an Xposed module?
Cheers,
Torsten
sumerland said:
I would like to understand whether it's possible to activate bluetooth 4 and bluetooth "classic" individually. The background: I want to use a bluetooth 4 tag in combination with tasker to automate certain things once the tag is within reach. I got a Texas Instruments SensorTag which is recognized by the Z1 and can be accessed via the TI software. Tasker is currently being improved to play with BT4 devices. The issue is that there is just a single bluetooth switch within Android, but of course I want to avoid the power hungry classic bluetooth and use bluetooth instead.
Any ideas if there is a solution? Maybe via an Xposed module?
Cheers,
Torsten
Click to expand...
Click to collapse
It is already BT 4.0 as long as device you use has it too, no further activation needed. If you try to use it with device that has older version like BT 2.1 functionality of BT 4.0 will be downscaled to work with older version.
zimbashka said:
It is already BT 4.0 as long as device you use has it too, no further activation needed. If you try to use it with device that has older version like BT 2.1 functionality of BT 4.0 will be downscaled to work with older version.
Click to expand...
Click to collapse
Many thanks! This sounds good! To be fully sure: once a BT2.1 device disconnects, BT falls "back" to 4.0? The longer I think about it I wonder whether it really makes a difference if a phone waiting for a connection is using BT2.1 or BT4.0. Do the 4.0 improvements have an effect on the power consumption before the connection is established?
sumerland said:
Many thanks! This sounds good! To be fully sure: once a BT2.1 device disconnects, BT falls "back" to 4.0? The longer I think about it I wonder whether it really makes a difference if a phone waiting for a connection is using BT2.1 or BT4.0. Do the 4.0 improvements have an effect on the power consumption before the connection is established?
Click to expand...
Click to collapse
It is more like imposed limits by older version go away. Power consumption in BT 4.0 is more like: little power used to connect, pair and then it uses more power when large amount of information needs to be transferred (like opening higher bandwidth based on Wi-Fi that uses more power for shorter period of time). While discovering device awaits connection it consumes very little of battery on either 2.1 or 4.0. from what I can see versions of BT evolve in added functionality that is based mainly on transfer rate as well as better power management.
Here more info:
http://en.wikipedia.org/wiki/Bluetooth
Hi, my Xperia T does not share the phonebook with the car's bluetooth after the update to 4.3.
I've removed the device from the car's list, and I've started the pairing from first step. The phone never asks for permission to share the phonebook.
Anyone else?
Kind regards.
butcher71 said:
Hi, my Xperia T does not share the phonebook with the car's bluetooth after the update to 4.3.
I've removed the device from the car's list, and I've started the pairing from first step. The phone never asks for permission to share the phonebook.
Anyone else?
Kind regards.
Click to expand...
Click to collapse
Am I the only one with the problem???
Hi,
My Xperia V works well with the car's bluetooth system, after my stock update from 4.1.2 to 4.3 .
I can see the phonebook entries.
Maybe you have any Smart Connect or Throw settings in conflict ?
Just a thought...
arturiu said:
Maybe you have any Smart Connect or Throw settings in conflict ?
Click to expand...
Click to collapse
The device (the car bluetooth system) shows at the Smart Connect with Throw as Functions, and Walkman as Applications, but I can't modify anything.
With 4.1.2, the phone asks for permission to share the phonebook, with 4.3 it pairs fine, but never asks for permission, and the list of contacts doesn't get shared...
All my contacts ara from my Gmail account.
Anyone else?
Kind regards.
butcher71 said:
The device (the car bluetooth system) shows at the Smart Connect with Throw as Functions, and Walkman as Applications, but I can't modify anything.
With 4.1.2, the phone asks for permission to share the phonebook, with 4.3 it pairs fine, but never asks for permission, and the list of contacts doesn't get shared...
All my contacts ara from my Gmail account.
Anyone else?
Kind regards.
Click to expand...
Click to collapse
What kind of car and system do you have? I have 2012 Fusion and Ford SYNC, and my Xperia T would not work at all with SYNC when it was running ICS. I'm on 4.1.2 now, and I won't go to 4.3 if this is a real issue. Would be great to hear from anyone else on 4.3 (and esp. with an Xperia T) to see if they are or aren't having this issue?
Thanks!
Samster
Try to copy the Gmail contacts. To local contacts on the phone. So mabey the car will see them this way.
Sent from my Nexus 7 using xda app-developers app
shadowroru said:
Try to copy the Gmail contacts. To local contacts on the phone. So mabey the car will see them this way.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I don't like this option, it kills the functionality of sharing contacts between devices. But I will give it a try.
Yesterday I received a call, and I wan't able to answer from the car buttons. I had to use the phone to accept the call, I talked through the car's bluetooth, but after that, the car's system got locked...
I've found people with the same problem on Xperia Z 4.2.2
samster2.0 said:
What kind of car and system do you have? I have 2012 Fusion and Ford SYNC, and my Xperia T would not work at all with SYNC when it was running ICS. I'm on 4.1.2 now, and I won't go to 4.3 if this is a real issue. Would be great to hear from anyone else on 4.3 (and esp. with an Xperia T) to see if they are or aren't having this issue?
Click to expand...
Click to collapse
My wife has a Focus'13, but I've not yet tested with it. She also has an Xperia T, but she refuses to upgrade.
My car is a Bmw e90'07
butcher71 said:
My wife has a Focus'13, but I've not yet tested with it. She also has an Xperia T, but she refuses to upgrade.
My car is a Bmw e90'07
Click to expand...
Click to collapse
Please, can anyone confirm that bluetooth is working with the handsfree of the car?
On my Fiat Punto EVO from 2010 works well without any issue. The car Bluetooth system is Blue&Me (1st generation).
Enviado do meu bq Curie 2 Quad Core através de Tapatalk
butcher71 said:
Please, can anyone confirm that bluetooth is working with the handsfree of the car?
Click to expand...
Click to collapse
Xperia V with stock 4.3, coming from stock 4.1.2 (rooted) .
Update kept all my Bluetooth and Wi-Fi settings.
Actually, only camera storing on local files instead of SD card and LTE as default were the only settings lost during upgrade.
As a result, my phone works well with the car's bluetooth system (contacts sharing, call handling, ...).
I didn't had to pair it again, and I won't do it, just to be on the safe side
bmw 3-series
arturiu said:
Xperia V with stock 4.3, coming from stock 4.1.2 (rooted) .
Update kept all my Bluetooth and Wi-Fi settings.
Actually, only camera storing on local files instead of SD card and LTE as default were the only settings lost during upgrade.
As a result, my phone works well with the car's bluetooth system (contacts sharing, call handling, ...).
I didn't had to pair it again, and I won't do it, just to be on the safe side
bmw 3-series
Click to expand...
Click to collapse
Update kept your settings? For me, I've to configure everything. How do you update keeping settings?
I've reverted to 4.1.2, and now it works again.
Kind regards.
butcher71 said:
Update kept your settings? For me, I've to configure everything. How do you update keeping settings?
I've reverted to 4.1.2, and now it works again.
Kind regards.
Click to expand...
Click to collapse
Yes, if you update a stock ROM with Sony PC Companion it will preserve the settings.
Happened to me (coming from 4.1.2 with .145 firmware) and to my wife (coming from 4.1.2 with .140 firmware).
butcher71 said:
Please, can anyone confirm that bluetooth is working with the handsfree of the car?
Click to expand...
Click to collapse
Hello there,
Just to let you know that my Xperia Z 4.3 stopped sharing the phonebook with the car's bluetooth system too (Insignia Navi900).
I can answer the phone and the handsfree simple mode works but there is no sharing of the contacts.
I am baffled too - will try to play a bit with the "smart connect" which automatically assigned "Walkman" to the car's handsfree functionality. To change this I need to be in the car and connected to the HF set.
Will let you know of the results.
samster2.0 said:
What kind of car and system do you have? I have 2012 Fusion and Ford SYNC, and my Xperia T would not work at all with SYNC when it was running ICS. I'm on 4.1.2 now, and I won't go to 4.3 if this is a real issue. Would be great to hear from anyone else on 4.3 (and esp. with an Xperia T) to see if they are or aren't having this issue?
Thanks!
Samster
Click to expand...
Click to collapse
UPDATE: I went ahead and installed 4.3, just because I was curious, and I haven't had any problems with Ford SYNC and my Xperia T at all. The only thing that was noticeable was that the first 2 or 3 times I got in the car after I paired, it would pop up a permissions box on the phone for the phonebook, or a permissions box for text messages, which I clicked "OK" and checked "ALWAYS ALLOW", and I haven't had any issues since. I even still have the MOBILE APPS functions working, so I can stream directly from Iheartradio and Pandora as well. Here's my phone specs:
Xperia T LT30p (originally stock AT&T LT30a)
Was: Android version : 4.1.2 / kernel version : 3.4.0-g5b052b2-00814-g976ab37 / Build number : 9.1.A.1.141 / Locked BL / rooted
Flashed: FW release : 9.2.A.0.295. Customization : Customized CE1 / Locked BL / (excluded baseband) / NOT ROOTED
Used Flashtool Version 0.9.14.0
oh, and I do have SmartConnectapp, but no events associated with pairing the car. Not using SmartConnect at all for anything with the car.
I do use it for other things associated with times - so I do have it turn off bluetooth at a certain time, and that does work and disconnect if I'm in the car.
and the car specs:
2012 Ford Fusion Hybrid
SYNC Gen1 - V4.0.2
with the radio that does NOT have the touchscreen - not sure which package it is.
Hope that helps anyone with problems.
Thanks,
Samster
butcher71 said:
Please, can anyone confirm that bluetooth is working with the handsfree of the car?
Click to expand...
Click to collapse
Confirm. My Xperia T does not share the phonebook with the car's bluetooth (Opel DVD800) after the update to 4.3.
samster2.0 said:
UPDATE: I went ahead and installed 4.3, just because I was curious, and I haven't had any problems with Ford SYNC and my Xperia T at all. The only thing that was noticeable was that the first 2 or 3 times I got in the car after I paired, it would pop up a permissions box on the phone for the phonebook, or a permissions box for text messages, which I clicked "OK" and checked "ALWAYS ALLOW", and I haven't had any issues since. I even still have the MOBILE APPS functions working, so I can stream directly from Iheartradio and Pandora as well. Here's my phone specs:
Xperia T LT30p (originally stock AT&T LT30a)
Was: Android version : 4.1.2 / kernel version : 3.4.0-g5b052b2-00814-g976ab37 / Build number : 9.1.A.1.141 / Locked BL / rooted
Flashed: FW release : 9.2.A.0.295. Customization : Customized CE1 / Locked BL / (excluded baseband) / NOT ROOTED
Used Flashtool Version 0.9.14.0
oh, and I do have SmartConnectapp, but no events associated with pairing the car. Not using SmartConnect at all for anything with the car.
I do use it for other things associated with times - so I do have it turn off bluetooth at a certain time, and that does work and disconnect if I'm in the car.
and the car specs:
2012 Ford Fusion Hybrid
SYNC Gen1 - V4.0.2
with the radio that does NOT have the touchscreen - not sure which package it is.
Hope that helps anyone with problems.
Thanks,
Samster
Click to expand...
Click to collapse
UPDATE: My system is still asking for permissions to read text messages everytime I enter and start the car, even with "always allow" checked, and I check "always allow" everytime. No problems with the phonebook, just the read text messages permissions. Eventually, the permission request on the phone disappears, not sure if its granting permissions on its own or not; havent probed further.
Samster
samster2.0 said:
UPDATE: My system is still asking for permissions to read text messages everytime I enter and start the car, even with "always allow" checked, and I check "always allow" everytime. No problems with the phonebook, just the read text messages permissions. Eventually, the permission request on the phone disappears, not sure if its granting permissions on its own or not; havent probed further.
Samster
Click to expand...
Click to collapse
OK guys... I'm going back to 4.1 / 9.1.a.0.489. For the following reasons...
1. Its never keeping "always allow" when it reconnects to my car - for permission to read text messages. Everything worked flawlessly with my car on 4.1
2. There's no way to root with a locked bootloader (yet) without installing a recovery
3. It irritates me that when I want to list apps in "most used" order, I'm limited to only 20 app icons. Have to undo it if I want to see more.
Sorry to keep bumping this thread to the top, but this is the last bump I promise.
Samster
jabe76 said:
Confirm. My Xperia T does not share the phonebook with the car's bluetooth (Opel DVD800) after the update to 4.3.
Click to expand...
Click to collapse
Confirm on Chevy with CD600 too. The reason seems to be the switch from BlueZ Bletooth Stack to Bluedroid Bluetooth Stack.
The porting of the features seems to be not that easy.
Cheers
Volsmart Fire006 Android 6.0 Double Din Car Stereo GPS with 8 Cores 2GB RAM 32GB ROM support 4G SIM Card https://www.amazon.com/dp/B01MR6XLLD/ref=cm_sw_r_cp_apa_ydqAzbABWYYG2
This looks like a very good price. US one day shipping from Amazon Prime. I ordered it and an external mic for ~$8 just in case. Hoping it's good. What do you guys think about it?
Well I pulled the trigger and purchased. I did not get the external mic. Had to hack up my dash trim and some of the actual dash. This is a 2004 Ford Focus. The iso harness connected with no modification as I previously had a Blaupunkt radio. I am having audio popping on my end when placing a bluetooth call. Music sounds great on bluetooth and is very loud and sounds full range. Hoping for some help with bluetooth call audio issue.
I saw you got it rooted successfully. Anymore updates? Did you get your calls to work any better?
pics? review?
scottc5 said:
I saw you got it rooted successfully. Anymore updates? Did you get your calls to work any better?
Click to expand...
Click to collapse
Xposed works. Youtube background play and ad block work. Calls still not sounding good. The seller had me reflash ROM. Still not sounding good. Seller suggested I try external mic. It should be arriving today.
CadillacMike said:
pics? review?
Click to expand...
Click to collapse
Good: Very fast, great sound, good wifi reception, good bluetooth reception, radio reception acceptable, volume nob works great.
Bad: Tight fit(had to cut dash and trim), bluetooth calls issue, google maps crash sometimes, google app crash sometimes, google voice search can't dial contacts, no option to voice dial contacts, second incoming call no notification or option to switch calls, some electical sound leakage in speakers when touching the screen(not bad I just noticed with my ear near speaker).
Overall: pretty good for the price.
that interface looks good
Its an MTCD. They're largely all the same, with variations in number of USB, SDCARD, amp chip, tuner module. The unit most fully kitted out is the GS MTCD board.
Notice HCT in the android version - they produce the PX5 SOM with the resellers specifying software options (launcher etc.)
Having owned a JY and compared it to a GS board I have - obtained as a spare part for hardware hacking - the GS is the one to go for.
marchnz said:
Its an MTCD. They're largely all the same, with variations in number of USB, SDCARD, amp chip, tuner module. The unit most fully kitted out is the GS MTCD board.
Notice HCT in the android version - they produce the PX5 SOM with the resellers specifying software options (launcher etc.)
Having owned a JY and compared it to a GS board I have - obtained as a spare part for hardware hacking - the GS is the one to go for.
Click to expand...
Click to collapse
Good info to know thanks.
kevev said:
Good: Very fast, great sound, good wifi reception, good bluetooth reception, radio reception acceptable, volume nob works great.
Bad: Tight fit(had to cut dash and trim), bluetooth calls issue, google maps crash sometimes, google app crash sometimes, google voice search can't dial contacts, no option to voice dial contacts, second incoming call no notification or option to switch calls, some electical sound leakage in speakers when touching the screen(not bad I just noticed with my ear near speaker).
Overall: pretty good for the price.
Click to expand...
Click to collapse
Did the external mic help? I saw that amazon froze this volsmart product too which is making me uneasy since I am in the process of installing mine.
scottc5 said:
Did the external mic help? I saw that amazon froze this volsmart product too which is making me uneasy since I am in the process of installing mine.
Click to expand...
Click to collapse
The mic did not help. Volsmart says they have sent me a new bluetooth module. I am still waiting for it. The old module will need to be de-soldered for removal. I am OK with this as I know electronics. They are not responding to support requests because of China blocking VPN access. If I don't get the new module before end of 30 days I will get refund.
When using Google Maps does the audio kind of stutter and cut in and out on yours? Mine does this but only in Google maps. Google now Assistant sounds fine
scottc5 said:
When using Google Maps does the audio kind of stutter and cut in and out on yours? Mine does this but only in Google maps. Google now Assistant sounds fine
Click to expand...
Click to collapse
Press the reset button on front with a paper clip. It happens after playing youtube and I shut off the vehicle.
kevev said:
Press the reset button on front with a paper clip. It happens after playing youtube and I shut off the vehicle.
Click to expand...
Click to collapse
Hmm mine seems to do it all the time tried reset, updating maps, uninstalling and reinstalling maps, clearing maps cache, taking out sd card. But nothing has fixed it so far... But all my other audio seems fine.
scottc5 said:
Hmm mine seems to do it all the time tried reset, updating maps, uninstalling and reinstalling maps, clearing maps cache, taking out sd card. But nothing has fixed it so far... But all my other audio seems fine.
Click to expand...
Click to collapse
Have you updated google maps?
kevev said:
Have you updated google maps?
Click to expand...
Click to collapse
Yep I updated it, tried downgrading to the stock version, and reinstalling it altogether.
scottc5 said:
Yep I updated it, tried downgrading to the stock version, and reinstalling it altogether.
Click to expand...
Click to collapse
If you have the same model as me I can send you the ROM for a reload.
kevev said:
If you have the same model as me I can send you the ROM for a reload.
Click to expand...
Click to collapse
Sure that would be great.
scottc5 said:
Sure that would be great.
Click to expand...
Click to collapse
Here is the reflash info that I received from the seller:
Please try to update your system with the newest firmware 20170502 following:
Update.img as below:
https://drive.google.com/open?id=0Bx2hoMIW0VUuUnk0QlVwV1Jybkk
instructions video show:
https://youtu.be/3ZY4BXi9QW8
【During the updating,please do not do any operation!It will all automatically upgrate.Otherwise,the unit will damage！】
kevev said:
Here is the reflash info that I received from the seller:
Please try to update your system with the newest firmware 20170502 following:
Update.img as below:
https://drive.google.com/open?id=0Bx2hoMIW0VUuUnk0QlVwV1Jybkk
instructions video show:
https://youtu.be/3ZY4BXi9QW8
【During the updating,please do not do any operation!It will all automatically upgrate.Otherwise,the unit will damage！】
Click to expand...
Click to collapse
Thanks that fixed my issue! It also seems to work better than before in general!
I was wondering if there is anything similar we can use for our Huawei devices. Maybe anything on play store.
I want to stream media with Bluetooth device and use phone's internal speaker for calls/mic.
Ideally an option to select which audio device I use for every app.
I found app: SoundAbout on play store. Will test it later in the evening.
There is a bug I have when playing PUBG mobile with bluetooth headset. It detects it as a call output device not media therefore the sound quality is really bad and very low volume.
Not sure if this will fix the problem but will see.
When you hook up a portable speaker then you can adjust the settings in the bluetooth so that music will go to the speaker and when you get a call that it will go to the phone.
RiTCHiE007 said:
When you hook up a portable speaker then you can adjust the settings in the bluetooth so that music will go to the speaker and when you get a call that it will go to the phone.
Click to expand...
Click to collapse
Thanks for that. I think I have seen that setting. Will try out.
goldenr said:
Thanks for that. I think I have seen that setting. Will try out.
Click to expand...
Click to collapse
If uploaded a pucture so you can see what i mean
goldenr said:
I was wondering if there is anything similar we can use for our Huawei devices. Maybe anything on play store.
I want to stream media with Bluetooth device and use phone's internal speaker for calls/mic.
Ideally an option to select which audio device I use for every app.
Click to expand...
Click to collapse
I've used the free app Bluetooth Auto Connect for several years. https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en_GB
Not sure it will let you have different options for each app, but I do actually use it for the exact opposite reason that you want... I direct calls to my car's inbuilt bluetooth but have my satnav app's instructions played through the phone speaker.
Also has Tasker integration...if you use it