[Q] Stuck 1x no data after Gingervolt/Broken Out 2 - LG Revolution

This was a new out of box phone on zv9. I rooted and wifi tethered my 4g (my only source of internet at home) but latency was high so I though I'd go back to my old decrap v1 froyo rom to see if that fixed my latency issues with this new phone (same make and model as my old one). I couldn't find any working links to the old froyo roms so begins the current problem..
I flashed gingervolt 2.0 and sim card would not activate after many attempts. I assumed this was because it's zv7 which I hadn't noticed.
So I flashed broken out 2.0 which says works with zv9. Unfortunately I didn't go back to my stock back up which I made before flashing gingervolt.
so basically, I went from stock zv9 to gingervolt and then straight to broken out 2.0.
My sim card activates on broken out 2.0 - at least I think - it's showing my phone number / prl version / network verizon in about phone, but also says mobile network state: disconnected. I have 2 bars but no 1x/3/4g symbol and no connectivity or calling ability.
I'm downloading the stock zv7 gb rom right now, but I'm guessing this won't fix it. Am I going to have to use LGNPST? And if so should I use zv8 if going to gingervolt?
I tried searching the forums, but there's 1000's of posts about 1x when the network went down and I'm on dial-up right now so I don't really have the ability to search through multiple threads.

willsmithbelair said:
This was a new out of box phone on zv9. I rooted and wifi tethered my 4g (my only source of internet at home) but latency was high so I though I'd go back to my old decrap v1 froyo rom to see if that fixed my latency issues with this new phone (same make and model as my old one). I couldn't find any working links to the old froyo roms so begins the current problem..
I flashed gingervolt 2.0 and sim card would not activate after many attempts. I assumed this was because it's zv7 which I hadn't noticed.
So I flashed broken out 2.0 which says works with zv9. Unfortunately I didn't go back to my stock back up which I made before flashing gingervolt.
so basically, I went from stock zv9 to gingervolt and then straight to broken out 2.0.
My sim card activates on broken out 2.0 - at least I think - it's showing my phone number / prl version / network verizon in about phone, but also says mobile network state: disconnected. I have 2 bars but no 1x/3/4g symbol and no connectivity or calling ability.
I'm downloading the stock zv7 gb rom right now, but I'm guessing this won't fix it. Am I going to have to use LGNPST? And if so should I use zv8 if going to gingervolt?
I tried searching the forums, but there's 1000's of posts about 1x when the network went down and I'm on dial-up right now so I don't really have the ability to search through multiple threads.
Click to expand...
Click to collapse
broken out is a zv8 or zv9 rom. gingervolt is for zv7. dont flash gingervolt on zv8/zv9.
what android version does it say on your about phone menu? find out your version, wipe data in clockword recovery, then flash the correct rom.
have you tried rebooting or cycling airplane mode? that works for me sometimes.
your sim card slot or the card itself might be screwed. try shimming it to improve contacts between the pins and the chip.

kyledyr said:
broken out is a zv8 or zv9 rom. gingervolt is for zv7. dont flash gingervolt on zv8/zv9.
what android version does it say on your about phone menu? find out your version, wipe data in clockword recovery, then flash the correct rom.
have you tried rebooting or cycling airplane mode? that works for me sometimes.
your sim card slot or the card itself might be screwed. try shimming it to improve contacts between the pins and the chip.
Click to expand...
Click to collapse
Well, I went ahead and used LGNPST to flash stock unrooted ZV9 back on it and it's still doing the same thing..
It finds service, but says Mobile Network State: Disconnected in about phone.
WiFi is off, Data is turned on.. I've rebooted/airplaned and messed with the sim card a lot, but I don't think the sim is the problem since it's connecting to the verizon network just not to data.
I have 2 bars as I normally would have, just no 4g or 3g data connectivity.
kyledyr;38918762dont flash gingervolt on zv8/zv9.[/QUOTE said:
Could this be the problem even though I've gone back to zv9 using LGNPST and it still has no data? I know that gingervolt wont work on my zv9 firmware due to improper radio, but now that I'm back on a zv9 rom the radio should be working (which it is just no data) perhaps it's an activation problem or perhaps when loading a zv7 rom on zv9 firmware something has been corrupted? but that should have been fixed with the firmware flash I just did.
I'm gonna try calling verizon and see if they can reactivate my sim card; maybe that is the issue.
Click to expand...
Click to collapse

Yep, that was the problem.
Apparently, at the same exact time I flashed broken out, verizon had decided to switch my data usage allowance - which deactivated my sim card.
I called and they reverted the data usage allowance, as I hadn't activated a phone on their subsidized pricing, thus I'm not bound to a new contract.
so the good news is I went ahead and used LGNPST to flash zv7 firmware and now I am gingervolted and still have my unlimited data.
good news and happy endings.

Related

gingerbread att tab

Just flashed the new gingerbread rom. Works great but it doenst recognize my sim card or network. I have att tab. Any help to restore it?
Did you remember to download the Modem package too? That's what I'm guessing.
sent from my Galaxy Tab using Cerebral up-link
Did you flash the version with the bootloader? Any whiteline issue on boot?
No I didn't download or flash a modem do I need to? I flashed the one with the bootloader. No whiteline I noticed.
I flashed with bootloader, tried 2 different modems, and no network. wifi works. tried flashing back to stock and everything went crazy. While I was using Odin, I STUPIDLY, plugged in my Captivate to charge without thinking, causing Odin to fail and I got the "phone - ! - PC" Icon.......talked about scared! Ended up using Roto's ATT stock image and Odin to get it back running again,barely. Now I get CRAZY lines when I boot (like if you tweaked the cable to an LCD screen), can't see Recovery screen....total craziness. Still no data. so I flashed back to OverCome Gingerbread ROM following his instructions, still no data
UNTIL
I swapped the SIM card with my phone. I suddenly got data on my Tab, but data would not function on my phone. Seems like the problem follows my SIM. Background: I also had a weird issue before hand where I couldn't open the Market on Cellular data without killing the data connection on Stock Rooted.
Thought I'd share.
EDIT: oh, and I can send text messages without issue.
Go to Settings, Wireless & Network, Mobile Networks, Access Point names and make sure you have one called Broadband (assuming you are on the ATT monthly data only plan)
If you dont, create a new APN and name it Broadband & make the APN Broadband as well. Just leave the other options and save it & select it.
I think by default it comes up with the ATT wap.cingular APN with doesnt work with the Tab Data plan.
RichAP said:
Go to Settings, Wireless & Network, Mobile Networks, Access Point names and make sure you have one called Broadband (assuming you are on the ATT monthly data only plan)
If you dont, create a new APN and name it Broadband & make the APN Broadband as well. Just leave the other options and save it & select it.
I think by default it comes up with the ATT wap.cingular APN with doesnt work with the Tab Data plan.
Click to expand...
Click to collapse
Well Son of B....you rock. What pisses me off is I've screwed up my boot screen (all kinds of colored lines) trying to fix this. Thanks.
Maybe this will help: http://forum.xda-developers.com/showthread.php?t=928076
Sent from my GT-P1000 using XDA Premium App
Gingerbread 2.3.3 installed modem does not work
AT&T monthly pay as you go. What modem.bin do I load? Where can I get it. Is there any additional setup instructions?
Follow my instructions above and flash the JK3 modem fromt this thread.
http://forum.xda-developers.com/showthread.php?t=1069727
Mine keeps saying insert sim card to access. So how do I get it to recognize the sim?
Please anyone with some help? Can I store back to original att froyo and just wait for official upgrade?
Have you guys entered in your APN settings for ATT Broadband?
I am also having a strange radio issue. I am using an ATT Tab with Overcome v2.0 Beta 2 and the JK3 modem. 3G data works great until I try to access the Google Android Market. As soon as I do it drops the 3G connection and wont come back until I reboot it. If I dont go to the market or only go to the market on WiFi it works just fine. I also verified that the same behavior happens with the JPZ modem..
My theory is somehow ATT is blocking Gingerbread Tabs from going to the market using their SIM card. Therefore I think maybe I need to edit my build.prop to spoof them. Can anyone recommend which values should be changed? Can anyone think of anything else that could cause this? Can anyone reproduce this issue on their ATT tab?
swedishcancerboi said:
Well Son of B....you rock. What pisses me off is I've screwed up my boot screen (all kinds of colored lines) trying to fix this. Thanks.
Click to expand...
Click to collapse
You used the bootloader patch app, right?
Reinstall the stock 2.3, then the root, then overcome. Follow the overcome guide, this time put the modem.bin in the phone slot in odin. There is no other fox for the wiggly lines. If you don't reflash everything, you can't get into recovery mode.
i cant get into the network settings as it tells me to insert a sim. I tried to flash the modem as well with no luck.
ok so I turned on my tab to play with it a bit and I had data! It was an H and seemed to work. When I restarted the tab it stopped working and said no sim again.
1) The Gingerbread rom has a modem with it that works fine on AT&T.
2) Did you leave your sim card in while flashing?
i did leave my sim in while flashing. Should I have it out? It seems the tab only recognizes the sim card every so often. Not all the time. Any way to flash the sim recognition part?
Could you please post how you flashed your att tab so I can follow it? Thanks.

[Q] after nv flash to stock rom no traffic while showing 3g

I after my simcard broke on me i resorted to pauls nv flash to stock rom to get the new simcard at the shop.
in the shop the card gave the 3g notice and i thought all was well.
went home and tried to root but failed with superoneclick and then tried trymhansens one that worked and i installed CM9 again.
i found out today because off using wifi at home that my sim shows that im using 3g or H but that im not getting any traffic i am able to make and recieve calls and sms.
so i nvflashed again and went back to the shop to ask if it was a provider side problem.
they told me its software related.
so here's my question what should i do now
nvflash the paul 10b or flash the latest dutch released rom that i downloaded from here.
or is there an other way that i can get it back to stock without the change of breaking it further.
i dont have the cash at the moment to get it fixed or by a new phone, so i am willing to use it as is now and just have internet at hotspots or at home but would like to fix it .
also flashing requires that i close down all other programs on my pc to avoid corruption ?
thanks in advance

Anyone has a bionic with ICS in it working on pageplus?

Call and ms just fine. No data connection. Phone information shows phone number unknown and network unknown.
alpenglow said:
Call and ms just fine. No data connection. Phone information shows phone number unknown and network unknown.
Click to expand...
Click to collapse
I'm curious as to which ICS ROM you're using, as the GSM hack does not appear to play nice with Team Gummy's ICS. Going to network settings causes force-closes for phone.
Also, it's recommended to go to the Dialer, dial *#*#4636#*#* and ensure that the network setting is for 'WCDMA Preferred'.
Other than that, I have nothing else to offer.
PagePlus is a Verizon reseller - CDMA, not GSM/WCDMA.
alpenglow said:
Call and ms just fine. No data connection. Phone information shows phone number unknown and network unknown.
Click to expand...
Click to collapse
I got it to work with voice and sms but since I don't care about data I never checked that. Sorry man.
I was going to fiddle with QPST and stuff but you can't do BPtools with SafeStrap, so I gave up. Like I said, I didn't care enough.
Descalzo said:
I got it to work with voice and sms but since I don't care about data I never checked that. Sorry man.
I was going to fiddle with QPST and stuff but you can't do BPtools with SafeStrap, so I gave up. Like I said, I didn't care enough.
Click to expand...
Click to collapse
Right. If we can't enter BPtools, then there is no way to upload PRL and some modifications through QPST or CDMA Workshop.
I heard that the an ICS update has been leaked.
http://www.gottabemobile.com/2012/06/22/motorola-droid-bionic-ice-cream-sandwich-update-leaks-again/
Any word on whether it's safe for us PPC users?
akhobbes said:
I heard that the an ICS update has been leaked.
http://www.gottabemobile.com/2012/06/22/motorola-droid-bionic-ice-cream-sandwich-update-leaks-again/
Any word on whether it's safe for us PPC users?
Click to expand...
Click to collapse
Im bumping this Im also interested in flashing this rom but Im on PagePlus also and
wasn't able to get 3g going at all on the other roms that has been out woindering if this one will work?
In the same boat
jbgtenn said:
Im bumping this Im also interested in flashing this rom but Im on PagePlus also and
wasn't able to get 3g going at all on the other roms that has been out woindering if this one will work?
Click to expand...
Click to collapse
You can use the same FXZ files to move around as the regular Verizon users, right? If so, just make a nandroid backup and then try out ICS. If you can make it work, great! If not, just FXZ back and restore the nandroid.
Well I Finally installed Ics leak on phone cause I was tired GB. I have been reading around other places that they were unable to get 3g but at first I was unable to get it either, when I flashed it last night. So I FXZ back to GB. This morning I said what the hell and did a esn reset on my phone and pulled my keys again and reflashed the phone back to ICS and was able to get 3g working so it is possible to have 3g on PagePlus with ICS leak. Im on 233.
jbgtenn said:
Well I Finally installed Ics leak on phone cause I was tired GB. I have been reading around other places that they were unable to get 3g but at first I was unable to get it either, when I flashed it last night. So I FXZ back to GB. This morning I said what the hell and did a esn reset on my phone and pulled my keys again and reflashed the phone back to ICS and was able to get 3g working so it is possible to have 3g on PagePlus with ICS leak. Im on 233.
Click to expand...
Click to collapse
Can you provide a step by step?
jbgtenn said:
Well I Finally installed Ics leak on phone cause I was tired GB. I have been reading around other places that they were unable to get 3g but at first I was unable to get it either, when I flashed it last night. So I FXZ back to GB. This morning I said what the hell and did a esn reset on my phone and pulled my keys again and reflashed the phone back to ICS and was able to get 3g working so it is possible to have 3g on PagePlus with ICS leak. Im on 233.
Click to expand...
Click to collapse
If there is procedure step by step, that would be great.
here is a step by step
http://www.howardforum.com/showthre...anual-activation-talk-text-mms-3g-all-working
I have done several bionics on ICS leak and they work fine. I have also done several on .905 and 3g is not as spotty for me as some others have posted. Maybe I'm just lucky.

[Q] Please Help - Galaxy Note suddenly show "Emergency Calls Only"

Quick background:
- I have an International version, sourced from Latin America
- I have rooted the phone but NOT custom ROM
- I have Straight Talk service
The phone was just working fine for almost 1 month, can receive call, SMS, etc. Just today, I shutdown the phone and took out the microSD card and SIM.
I copied some files to the microSD card using a reader and left the phone with the SIM and battery out for about 30 minutes.
I put the microSD, SIM and battery and rebooted the phone. Suddenly, I got Emergency Calls only!
I have tried to "fix" it but to no avail:
1). Looking at the 3 PIN in the SIM slot, they are all INTACT, nothing bend or broken or lopse
2). The SIM card works - tested it in another 2 different phone and can make calls, etc.
3). I did CWM recovery to a backup from 1 day ago (when the phone still works)
Anyone have this experiences or my phone just DEAD?
weird...
try do the hard reset (try not to restore anything yet), if still doesn't change anything... flash new radio (LC1)
I disassembled my Note using the instructions from here to check if any of the 6 (SIX) SIM Card connector is bent and it is NOT.
I am putting it back together now and will do factory reset (this is what you meant by "hard reset", right?). I will post back with updates/
PS: this is INDEED weird. The phone works OK, Wifi works, sound works, screen works, microSD card is readable, everything works EXCEPT the GSM connection! And I didn't even mess aroud with the custom ROM/kernel/radio!
did u test other sim card on that phone yet?
thehackersz said:
did u test other sim card on that phone yet?
Click to expand...
Click to collapse
I don't have an extra SIM card. What I did was take out the Straight Talk (ST) SIM card from my Note and put it in another unlocked GSM phone (Nokia N73). The Nokia N73 works with the ST SIM.
I just did a "Factory Reset" and still the same thing.
Before I try the radio flash, what will this "software" do to the Note modem? I am just curious how it will fix it.
BTW, my Baseband vesion is "BKK1", and I don't see the radio for this baseband in the link you provided. Which one should I use?
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
flashing the radio doesn't effect your rom... try them.
try to borrow your neighbor sim card first before flash new radio.
thehackersz said:
flashing the radio doesn't effect your rom... try them.
Click to expand...
Click to collapse
Which radio files I should use? The link you provided show multiple radios, but I don't see one for my phone:
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
Try to clean the Sim slot.
Yes, I tried cleaning the SIM slot. I have been very careful with my Note since day 1.
Someone mentioned that they have the same problem and was able to fix it by flashing STOCK ROM back.
I searched in the development section and could not find ROM for my phone (N7000UBKK1). Do you have any idea where I can get this from?
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
lanwarrior said:
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
Click to expand...
Click to collapse
Boy.. That's a serious issue man.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
Click to expand...
Click to collapse
LOL
Anyhow,
I found out the solution to this problem by accident, and there doesn`t appear to be a solution anywhere else on the internet. Turn off your phone and restart it. As soon as you are able to do so, open up setting, or any other app. When your phone goes into cool down mode, hold down the home button. A screen will come back asking you to select an app. Select whatever you opened prior to cool down mode (If you need to get into settings press the search button and search for settings after your out of CDM). You then need to do two things. Go to Running services (Settings>Applications>Running services), find detect battery service, touch it and stop it. To the best of my knowledge, it doesn`t do anything to your phone, other than activate cool down mode. Then go to manage applications (Settings>Applications>Manage applications) press your menu button and select filter> all applications. Find Battery protect, click on it, and select force stop. This allows your phone to get reception. You will have to do this every time your phone starts up, but it isn`t too much of a hassel for a truely excelent phone. The Cool down mode problem is definitly a software fault.
Source:
askmefast.com/My_galaxy_s2_shows_i_have_signal_but_says_emergency_calls_only-qna1783355.html
I'm also having the same problem and mine is also N7000UBKK1. Anyone know what's going on?
Try another rom. I have it on some roms and some not
Sent from my GT-N7000 using Tapatalk 2
Try the following link
http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207
If you can get into download mode then flash using PC odin
AbyssNotekernel42CWTouchOriginalLogo.tar
If it pass you can flash a GB rom in your sdcard.
HELP!!
I have also had this same problem. My phone is STOCK I have not touched it. got the phone on last Monday working fine until the battery level ran right down yesterday, then I got message to "insert sim card!", ever since re-starting the phone I no longer can make calls!. I had no intension of rooting or messing with this phone and decided to wait until official ICS, but now what do I do?, is this a common problem?.
Tried previous instruction on this post, but unable to find any battery service running on the device.
Please help!!
I now also have this issue after updating to the latest firmware via Kies.
UPDATE: I got mine checked and it looks like the replacement unit I got had its SIM card broken. Dodgy eBay seller.
Just fyi, never insert MicroSim card adaptor in Galaxy Note. Mine works now after spending $100. Jeez
FYI, I tried all of the suggested solutions in this thread and I still have problem. So I returned the Note and got the AT&T version... At least now I got US Warranty
Same thing just happened to my phone. Rogers Galaxy note II.
Tried bunch of different SIM cards, none work.
Got the SIM reader app, phone reads SIM just fine. Data connection also works, but refuses to make voice calls "emergency only".
So pissed, wanna throw this phone against the wall.
Did anyone find a solid solution? Mine did this today, Stock never been rooted or anything! Any ideas?

[Q] Unlock and Radio Issue, Please Help

I am deployed to Afghanistan right now. I ordered a brand new XT862, rooted it, and installed safestrap 2.10 and cm-9-20120815-UNOFFICIAL-solana.zip. That worked beautifully.
Unfortunately I am having problems getting the radio to work. I would set an APN but then sometimes it would just not appear in the list. I would set it again and again, then sometimes all of the APNs would appear in my list until the radio failed. After flashing, formatting, and reflashing several times and having the default Verizion access points finally pop up out of nowhere in my APN list, I realized I never "unlocked" the phone. I am using a Roshan SIM.
The weird part is the radio would work for a period of time. First for several hours, then it would start failing more and more frequently.
I found the XT862-5.7.906-SAFE and flashed it, hoping it would ask me for an unlock code upon booting, but no dice. It just went into "Global" mode. I am testing right now to see if the radio stays stable.
So, I am wondering if these instructions:
Guide - Unlock XT862 for T-mobile/ATT
http://forum.xda-developers.com/showthread.php?t=1406812
will get me to the unlock code screen, and once unlocked, will my radio problem disappear when I reflash CM9? My Internet connection is painfully slow here in Afghanistan so I only want to download what I know will work.
I do have a second XT862 that I had unlocked, then rooted and flashed CM9 to and it is working very well on Roshan out here.
Thanks for your help!
While running the XT862-5.7.906-SAFE, the radio cut out and I got a BP paniced message. I couldn't remember all of it before it crashed completely, but it asked to connect the USB for debugging. While the screen was flickering, a window popped up asking if I wanted to switch to GSM.
The radio doesn't seem to be stable even with this firmware.
Any suggestions or help would be greatly appreciated.
The radio cut out again, so I tried switching it from global to CDMA and then to GSM to see if I could get it to reset.
It told me there were no GSM networks available, and then asked to switch to Global.
I hit ok, then it told me that the SIM was invalid...
I'm a noob to this phone stuff, but this just seems crazy.
It seems it's definately the phone, because I swapped the SIMs in my two phones and the problems persist with the new one. My functioning phone continues to work fine on the chip designated for the problem phone.
Did you flash the 883 radio?
MrObvious said:
Did you flash the 883 radio?
Click to expand...
Click to collapse
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
ThunderZuk said:
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
Click to expand...
Click to collapse
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Skreelink said:
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Click to expand...
Click to collapse
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
ThunderZuk said:
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
Click to expand...
Click to collapse
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Skreelink said:
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Click to expand...
Click to collapse
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
The Droid 3 does not require RSDLite, as it has fastboot. Which is able to flash certain parts alone instead of the whole system (or the whole thing together) it's easier than RSDLite and can make modifications without losing everything. That's how the XT883 radio is flashed without modifying the system.
The one click method would fully flash it as if you used an SBF in RSDLite. If you have safestrap enabled on safe; make a full backup with recovery, then disable safe-mode. You'll then reboot into your stock system, unlock there, then enable the safe boot again, restore your backup.
SIM unlocking is for good, no amount of flashing, updating, etc will revert it. If the phone DOES get service with the sim, then it's already unlocked.. if it's occasionally cutting out, that's a different issue.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
Holy shinto! I didn't know it saved that! I figured it was gone!
So I disabled safestrap, then it kept telling me com.android.phone had stopped. I'd force close and it would say it again. I went back into safestrap, did a factory wipe, rebooted and now it is connected in "Global" mode again on the stock 5.6.890.XT862.Verizon.en.US. It was looking good for a while, until the phone just rebooted itself.
I put my other SIM in the phone, booted back up and it worked for a while until the signal dropped and the phone gave me an invalid SIM error again. So, it's given me an invalid SIM on two different SIMs now in stock and flashed ROMs.
The SIM is in there tight. I couldn't get a piece of paper in there. I cleaned the contacts again, but they don't look dirty at all.
I put the original SIM back in there, it booted up, never got signal, and rebooted itself again. It doesn't have signal now, and I assume it's just about to reboot itself again.
You think I got a bum phone? I didn't test it at all before I started hacking it.
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
ThunderZuk said:
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
Click to expand...
Click to collapse
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Skreelink said:
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Click to expand...
Click to collapse
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
ThunderZuk said:
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
Click to expand...
Click to collapse
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Skreelink said:
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Click to expand...
Click to collapse
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
ThunderZuk said:
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
Click to expand...
Click to collapse
Hm... while in unsafe (stock) the unlock screen should have come up. It will not on other roms, as for global mode, that is a default setting, without unlock, will only work with the verizon vodafone sim that came with the phone. Reboots can be either hardware, rom, or app problem. You can try a factory wipe and see if that helps the reboots. Trying to find solutions without you having to download more.
Endoroid said:
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
I was kind of worried that was the case. I just ordered a refurb unit just in case.

Categories

Resources