Hey Guys
I have a Problem with BenzROM V3.
When i try to install the ROM in recovery mode it says
E: signature verification failed.
Ive installed the Stock Version:
Germany (Jan 2013)
PDA: I8190XXAMA1
CSC: I8190OXAAMA1
Version 4.1.2
I tried the rooted an unrooted Version, dont know if that does any difference.
Would be nice if you have a solution for this problem.
Thank you
You need to flash cwm recovery first.
AW: BenzROM V3 signature verification failed
With my phone it didnt worked with trwp. Got the same error!
I had to install cwm to fix that.
Gesendet von meinem GT-I8190 mit Tapatalk 2
You PM'ed me 3 times and now here too? What the hell is the matter with you?
first step
install https://play.google.com/store/apps/...xLDEsImNvbS5rb3VzaGlrZHV0dGEucm9tbWFuYWdlciJd
on your phone
then open it and go into "download rom" select the option that best fits your requirement (i picked clockworkmod recovery)
flash that to your phone
once that is done you should reboot to recovery
in there you can then install Benz's custom rom
Related
hello,
I try'd to install cm7 but it failed.
i can go in download mode and in recover mode but in recover mode i got :
E: unknown volume for path [/data]
.......... ( and more errors )
what can i do?
i dont have clockworkmod...
i was on I9000XXJVO and if i can recover it by using odin give me a download link for an rom (A)
here
You could have found this if you used the search button.
Generally your error can be resolved by flashing a stock ROM with PIT and partition ticked.
Stock rom can be found at sammobile.com..
thanks i fixed it now and rooted my phone but can i install a custom rom of will i get the bootloop?
Custom rom use new version of recoveri. When you went in bootloop pull out battery, and put it back and then enter in recovery and flash custom rom
Sent from my GT-I9000 using Tapatalk 2
ericosman said:
thanks i fixed it now and rooted my phone but can i install a custom rom of will i get the bootloop?
Click to expand...
Click to collapse
well there are some custom rom that after applying it the phone is stuck on bootloop usually you just have to remove battery then install the update again..
btw just follow the instruction on to how to update to your chosen custom rom and make sure you followed the pre requisites as to avoid bricking your phone...
there are some custom rom that requires certain firmware before you could actually update to that custom rom. like if you need to be on xxjvz update your phone to xxjvz first then apply the custom rom.
try sammobile.com... for some stock firmware if ever you needed to update to it...
Unbrick
Thanks this was the only thing that surpised me on galaxy player
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
GZep89 said:
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
Click to expand...
Click to collapse
https://www.dropbox.com/s/d382m2kyorzum16/ezbase recovery kit gb.zip
flash your phone with ezodin..all instructions given
Thank you!
pp_prathap said:
flash your phone with ezodin..all instructions given
Click to expand...
Click to collapse
Thank I LOT, it works fine now, I hope
After all, I got an error when installing Clockmod recovery:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Click to expand...
Click to collapse
So, just need to flash PDA part via Odin this file:
CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.zip (tar inside zip archive)
from this thread: http://forum.xda-developers.com/showthread.php?t=788108
finally I installed cm9.
P.S. mby someone got similar problem.
Hey
there is an easy guide..this'll flash 2.3.6 value pack
Guide: http://www.androidauthority.com/galaxy-s-gt-i9000-gingerbread-xwjw1-firmware-52955/
To root 2.3.6 go to : http://www.androidauthority.com/galaxy-s-clockworkmod-recovery-51392/
Simple using Odin...and yeah after rooting this u can flash CM9 through CWM...and remember to make the wipes...
Help i bricked my samsung note.
when i go at the recovery i cant format emj or data or emmc i got error
i get this error
E:failed to mount /data (invalid argument) ECopy_log_data cant mount /data
i try odin programm with stock firmware and he stack at samsung icon!
sorry for bad english
video in a while ... help me please i want to unbrick my phone
Here is my video guys help me pleaseee .... dont avoid me
youtube.com/watch?v=8WBdO4RdkqQ add W W W
what ROM you had before this happened?
Was phone rooted?
if yes was it on stock kernel?
what you were doing when this happened?
and where is video link?
Valium10 said:
what ROM you had before this happened?
Was phone rooted?
if yes was it on stock kernel?
what you were doing when this happened?
and where is video link?
Click to expand...
Click to collapse
It was stock Rom i install from cmw SU and i root the phone
i try to install cricskelo rom
its stuck at samsung icon and nothing else!
Here is the video - > 8WBdO4RdkqQ at youtube
so??
Did you use CWM.zip? Or how did you root your stock Rom?
yes i install cmw ! and after this i install criskelo rom
rooy said:
yes i install cmw ! and after this i install criskelo rom
Click to expand...
Click to collapse
One more try and read what I write:
Did you use a file "cwm.zip" to install cwm (there is no cmw)?
Your answers should be precise - help is more easy then
ThaiDai said:
One more try and read what I write:
Did you use a file "cwm.zip" to install cwm (there is no cmw)?
Your answers should be precise - help is more easy then
Click to expand...
Click to collapse
Yes i use CWM.ZIP to install cwm
rooy said:
Yes i use CWM.ZIP to install cwm
Click to expand...
Click to collapse
Okay. Then we can assume you hard bricked your device.
To confirm this (or not) please download a stock Rom (Dr. Ketan's thread or sammobile.com) - it's not so important what you choose, but should be for your country.
Install this Rom with PC Odin on your device.
And have a look at the messages: if it stops at factoryfs.img the it's bricked.
ThaiDai said:
Okay. Then we can assume you hard bricked your device.
To confirm this (or not) please download a stock Rom (Dr. Ketan's thread or sammobile.com) - it's not so important what you choose, but should be for your country.
Install this Rom with PC Odin on your device.
And have a look at the messages: if it stops at factoryfs.img the it's bricked.
Click to expand...
Click to collapse
i try to install with odin stock rom and doesnt stop at factorufs.img it finish and succefully complete . but now it stucks at samsung galaxy note gt-n7000 at boot!
and now new problem at stock cmw . When it boot at stock cmw i got a messenge
Deleting Cryption Neta Data.
#Manual Mode#
--Updating application...
Successfully updated application.
--Appling Multi-CSC...
Installing Multi CSC
Cant access to '/system/csc/EUR/system/'.
Succesfully applied multi-CSC.
rooy said:
i try to install with odin stock rom and doesnt stop at factorufs.img it finish and succefully complete . but now it stucks at samsung galaxy note gt-n7000 at boot!
and now new problem at stock cmw . When it boot at stock cmw i got a messenge
Deleting Cryption Neta Data.
#Manual Mode#
--Updating application...
Successfully updated application.
--Appling Multi-CSC...
Installing Multi CSC
Cant access to '/system/csc/EUR/system/'.
Succesfully applied multi-CSC.
Click to expand...
Click to collapse
Download a different Rom, check MD5 and install it with PC Odin - you should make sure that you have condition that is exactly defined.
I will not answer or search for solutions if this isn't clear, sorry.
ThaiDai said:
Download a different Rom, check MD5 and install it with PC Odin - you should make sure that you have condition that is exactly defined.
I will not answer or search for solutions if this isn't clear, sorry.
Click to expand...
Click to collapse
Where i can find roms for odin ? i dont know -.-
AW: Help i bricked my samsung (Video)
http://forum.xda-developers.com/showthread.php?p=20963707
Sent from my GT-N7000 using xda app-developers app
all its ok but it stucks at boot in samsung icon ?
can't access to /system/scs/eur/system new messenge at recovery mode..
Stupid, stupid, stupid and 1000 times stupid: 10 post rule!
I think this post should be here: http://forum.xda-developers.com/showthread.php?t=1927097
Any way, I need help so I'll take it from where I can. By the way I'm not a android newbie, just N7000 newbie.
I have been last 8 hours trying to flash a new rom to my new N7000. As I'm on a mac and don want to set the "counter" of N7000, my path was going to CWN from that post.
But I'm stuck, as when I try to do a "update from sdcard" I got a:
E:failed to verify whole-file signature
E:signature verification failed
I have tried different downloads in different paths and still the same. I have a VSLB1 original firmware.
Any ideas?
Download Philz kernel (choose the correct one) and flash that through the stock recovery.
I'm up and running....I'll tell how I fix it:
1. I downgrade to an old official firmware trough Odin (just PDA: N7000ZSKJ6_N7000OZSKJ6_TGY.zip)
2. Then I rooted trough GalaxyNoteRoot/runmemac.sh (root apk didn't work)
3. Installed MobileOdinLite (you will need to download MObileODIN FLashKernel N7000 v3.0 => scroll really down on MobileOdinLite post)
4. From MobileOdinLite updated a kernel with CWM (CF-Root-SGN_XX_OXA_LB1-v5.0-CWM5.zip)
5. From CWM installed my desired rom (AllianceROM)
6. Finally, using Odin update the modem (was not working) to XXLT3
Hope this info be useful
Hello,
I've been stuck on this problem all the afternoon and evening.
Here it is : I got my mother's n7000 offered, which has never been flashed before. Today, I'd like to install CM10.1. I want to install CWM (PhilZ) in order to flash CM.
When I try to "apply update from sdcard" in the stock recovery (file: PhilZ-cwm6-XXLT4-OXA-4.93-6-signed.zip) it tells me that E:signature verification failed.
And when I try to use Odin, to flash a PDA (.tar.md5), it get stuck on "NAND Write Start!!".
Concerning Odin, I found out it could be a problem that has to do with the phone partitioning and that I should flash a PIT file to resolve that problem. So I used Odin to 'flash' a PIT file. But still, this doesn't resolve the CWM installation problem...
Anyone has an idea on why is this happening and how could I get out of this mess?
Thanks in advance! Bye!
Up please, can anyone help ?
Thanks XDA community.
cannadams said:
Up please, can anyone help ?
Thanks XDA community.
Click to expand...
Click to collapse
What worked for me back in the day was using
http://forum.xda-developers.com/showthread.php?t=1901191
An older version from here, for example << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
Then once that is installed, reboot to recovery again and install the new "advanced version"
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/ (4.84.3 ZIP)
Then restart and you should be able to flash the one you wanted.
Also, try using older ODIN version, I think I use 1.87 or something like that, definitely not 3+.
Thank you for your help, I succeeded installing Philz 5 via Odin 1.85, then updating to CWM (KitKat compatible), then installing NightOwl (Android 5.1.x with CM12) Beta4
Once again, thank you!