Database Develop

Devil Kernel Jelly bean

hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?

You install them with CWM Recovery, I don't know if a wipe is needed but you can make one just to be safe.

rAuL7sMok3 said:
hey guys..i want to flash the new gnexus jelly bean port v6.1 and i don't know how to install the devil kernel...after i install the rom i need to reboot my phone and then full wipe and install the kernel?
Click to expand...
Click to collapse
Hey
its not necessary to make a wipe while flashing the kernel(ONLY THE KENEL)
its flashed after the installation of the rom is complete..

Devil Kernel will automatically wipe cache and Dalvik. Just throw the Zip onto your internet SD and flash from CWM. That's all.

Help. I done exactly as you guys said (i'm using cm10 btw), and the boot screen now shows CM9 boot animation instead of cm10, is this normal? Also it is laggy (meaning it starts and stops). Normal??

[Q] Unsure on How to install Paranoid Android

Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.

Nazeiro said:
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Click to expand...
Click to collapse
Since you are on Hydracore it is safe to wipe. But just to be sure just take a nandroid backup, by Booting in to recovery
Selecet Backup & restore--> Select Backup & do a nandroid backup Then just follow the installation procedure below
Keep both the ROM & Gapps file on your SD card
Wipe data / factory reset
Wipe Cache Partition
Go to Advanced - > Wipe Dalvik Cache
Select Install Zip from SD Card--> Select either internal card or SD card (external sd ) based on where you kept the file-->Install the zip file of the ROM
Same way Select & install the Gapps package
Go Back & wipe Cache Partion & Dalvik Cache once again
Reboot & you are Paranoid...:good:

the best advice I can just offer you is to go to the respective Paranoid Android ROM thread and post this question there. There many people there as well willing to help you. Or you can wait for someone who has PA already on their device and perhaps they can give you some nice info on how to go about installing PA on your phone.
sorry, I can't do much help on you as I'm not using JB for now.

You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.

Help i am stuck on the PA logo
singh.harvinder said:
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Click to expand...
Click to collapse
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?

You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2

Do i need to...
Utacka said:
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Click to expand...
Click to collapse
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?

Nazeiro said:
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Click to expand...
Click to collapse
Yes you need to factory reset when coming from another rom that is not aosp based, i.e stock gb/ics.
Skickat från min GT-N7000 via Tapatalk 2

Nazeiro said:
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
Click to expand...
Click to collapse
I think you need to read instructions to the point before carrying them out. I had posted you the method for installation of PA which so far as I know is the correct one coming from any non AOSP based ROM. Pls. do follow the instructions. In case you are in doubt just ask for a reconfirmation.
Also any ROM developer will have the instructions posted in the OP thread, which you should definitely follow.
As others have told you, do a full wipe coming from a non AOSP based ROM..

By the Way if your problem is solved just change the OP title to Solved..

In regards to doing a full wipe: When doing the same process a couple of weeks back, coming from a stock ICS rom to PA i read you need to do a full wipe.
google brought me to this page: http://checkrom.com/threads/full-wipe-the-correct-way.432/
do you guys consider wipe/factory reset to be sufficient or is it a good idea to do this manual format of the /system/ /data/ and /cache/ partitions as per the above guide?
I was in a bit of doubt on that one at the time, so i did it anyway to be on the safe side and it all worked fine.

Paranoid android
Hey :laugh:
Someone can tell me what's the difference between the Paranoid rom from Imilka (PARANOIDANDROID 2.1 http://forum.xda-developers.com/showthread.php?t=1797698) and the Paranoid rom from Utacka (PARANOIDANDROID 2.15 http://forum.xda-developers.com/showthread.php?t=1871713)????

To be sure
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer

kokodv said:
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
Click to expand...
Click to collapse
yea, hydracore is safe, flashing using hydracore is safe
Skickat från min GT-N7000 via Tapatalk 2

[Help Needed] Can

i really need help on those Root Gurus out there.
Android Version : 4.0.3
Baseband Version : N7000XXLPT
Kernel Version : 3.0.15-Franco Kernel [email protected] #5 SMP PREEMPT
Build Number : KingDroid NoteMania Edition V3.0
Click to expand...
Click to collapse
Okay heres the thing , I want to flash a new roms and I did the same old thing
Wipe data/Factory reset
Wipe cache partition
Go to advance screen and wipe dalvik cache
Install zip from sd card - > choose zip from sd card. Find your ROM in the extSDcard.
Flash the ROM and reboot system.
While flashing , it took so long to actually flash like 10mins or so and I give up and I did a hard reset.
Can anyone point to me where did I do wrong ?
And I'm trying to flash this
http://rootgalaxynote.com/galaxy-note-roms/tmt4-jelly-bean-rom-for-galaxy-note-gt-n7000/

Up this post .

Up.for.awareness

Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000

msedek said:
Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000
Click to expand...
Click to collapse
i tried flashing hydracore and it took for me 10mins plus at the screen and still at the same place.

you tried to flash hydracore, and its not installing ?
may be try to flash back the stock ICS using odin and then flash Philz kernel to gain root
.boot into recovery and go to mounts & storage.
format / sytem
format / data
then try to install your TMT rom

If TMT is installed, Or even part installed then it wont boot with Hydracore kernel, The main thing is just having the kernel installed cause its safe, So, In recovery (with Hydracore installed)
Do all the necessary wipes, Flash the ROM, Then flash the kernel (Philz kernel)
then it should boot
If not, follow the above post to revert back to stock ICS / GB with odin, and then start the whole procedure again :good:

[Q] safe to flash from 3.0.32 kernel?

Hello Community.
I want to flash my Note to chimeras Rom: http://forum.xda-developers.com/showthread.php?t=1993478
I am actually running and Paranoid android version i dont know. the only thing i know there was cm9 in the description but i am afraid that the kernel is safe to wipe...
The kernel is [email protected] 1 #1.
I am very terrified about this safe kernel, unsafe kernel issue so i want to know if it is safe if i follow the instruction in the Chimeras rom thread.
Installation Method:
If you are coming from any other ROM especially other than JB AOSP Roms, we recommend full wipe:
Make sure to run CM9/10 or an AOSP-based ROM : FLASHING/WIPING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Wipe Data
Wipe Cache Partition
Mounts and Storage > Format System
Steps to be followed by all users:
Download latest ROM build & Google Apps (from below links) on your SDCARD
Reboot in Recovery - Make sure you are on CM9/CM10/AOSP-based ROM's recovery
Mounts and Storage > Format System
Flash Chimera
Flash Gapps
Reboot, ain't that simple?
thank you in advance

You're on a cm9 based kernel which is safe. It's only stock kernels and cmw.zip that are unsafe.
Sent from my GT-N7000 using xda premium

How to Downgrade From CM10.1 Nightly Rom Back to Any Stock Rom?

Bought a 2nd hand Samsung N7000 with CM10.1 Nightly Rom but my wife prefers the phone to be on stock Rom.
Can anyone kindly advice how to safely downgrade back to any stock Rom?
Details of device per attached photo.

Just flash any stock ROM that you (or you wife ) like
You can find here a lot of ROMs
http://forum.xda-developers.com/showthread.php?t=1847786
Good luck

Don't think the current kernel version is stock so need to update the kernel before using Odin to flash a new rom?

1. Do all wipes and do format /system, /data, /preload
2. Reboot download mod
3. flash any JB/ICS/GB stock rom
there is no need to do anything else, pc odin flash is the best way.

anoopva said:
1. Do all wipes and do format /system, /data, /preload
2. Reboot download mod
3. flash any JB/ICS/GB stock rom
there is no need to do anything else, pc odin flash is the best way.
Click to expand...
Click to collapse
Have tried to flash stock ICS 4.04 Rom using Odin but after flashing the phone got stuck at Samsung logo unable to boot
Did not do any wipes and do format /system, /data, /preload mentioned before flashing though
Below is the stock ICS Rom that has been flashed:
http://forum.xda-developers.com/sho...tuck+at+samsung+logo+after+flashing+stock+rom
July 12
N7000DXLR2---4.0.4/12.07.09-N7000OLBLR1--- Download--- Singapore
Have tried to flash the stock ICS Kernel but the phone still got stuck at Samsung logo unable to boot
Below is the stock Kernel that has been flashed:
http://forum.xda-developers.com/showthread.php?t=1371007&highlight=stock+kernel+for+ics
DXLR2 - http://d-h.st/J2t

Flash Philz Kernel using Stock Recovery http://www.mediafire.com/?0ubq6fl352rc583
(PhilZ-cwm6-DXLR2-OLB-2.7-signed.zip)
Then reboot to recovery mod, do factory reset, wipe dalvik cache and cache partition , reboot.
Now you phone should be working fine.
NB: Never Do any wipes/factory rest in in stock recovery, it can cause EMMC brick.