So i tried to give my atrix HD more internal memory by swapping them but when i did the process it didn't work 100% but i had progress.. after that i returned every thing back to the original state before i started.. when i inserted my sd card back in my phone and i went to my system settings and when i click on storage it says settings is not responding... but with the SD card removed i can go into storage and see all my internal data.. can someone show me the way to getting my SD card back at the least and maybe even helping me switch my member slots.. thanks in advance
Flash back to stock.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Flash back to stock.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Now i know this might be a noobquestion but are you suggesting i flash my stock rom ?.. I'm still getting used to ask these android terms.. please bare with me..
Yep. Or you could try a factory reset first. But I did that and ended up having to flash back to stock.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Yep. Or you could try a factory reset first. But I did that and ended up having to flash back to stock.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Ok I did that. But that still didn't work.. would flashing a whole new rom work to?
And how do you have your signature atthe bottom of all your messages
That's what I had to do was flash a new rom. And just the settings in the app.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
That's what I had to do was flash a new rom. And just the settings in the app.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Well i have flashed the new roms and stock ones.. what format is the SD card suppose to be in for the atrix to read it
That I'm not sure. I'd just format it from the phones settings.
Sent from my JokerMATRIX HD MAXX
Related
Currently, I've tried all from the Batakang series, Nexesque, and AOSPizza, and only Batakang Rises has worked on AT&T. What other ROMs work on AT&T? I'm also having an issue with Batakang Rises. I editted the build.prop to get rid of the nav bar and the status bar disappeared too. I was using SS3, but I'm gonna try again with Rom Manager to try to get it to work.
All the roms in this forum work on att man.. And 75% of the RAZR HD roms do with a couple file changes. Also if your unlocked just use cwm delete safestrap
Sent from my JokerMATRIX HD MAXX
deeje00 said:
All the roms in this forum work on att man.. And 75% of the RAZR HD roms do with a couple file changes. Also if your unlocked just use cwm delete safestrap
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
I'm trying Rom Manager right now, and it won't let me flash the Gapps with the Batakang Rises, limit is 1 zip.
And how do I get all the other roms to work with AT&T? They would never pick up signal.
Yeah because that's not the actual recovery. Go into cwm's actual recovery and you can flash 1 after the other. And I haven't any signal problems.. Are your apn's correct?
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Yeah because that's not the actual recovery. Go into cwm's actual recovery and you can flash 1 after the other. And I haven't any signal problems.. Are your apn's correct?
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
How do I go into the actual recovery? I press "boot into recovery" in Rom Manager and it takes me to fast boot which is confusing. And none of the ROMs will let me change my APN settings, its always greyed out.
Is your boot loader unlocked?
Sent from my JokerMATRIX HD MAXX
CM10,
And if your in the lte zone, add this to your build.prop
Code:
ro.telephony.default_network=9
ro.ril.def.preferred.network=9
deeje00 said:
Is your boot loader unlocked?
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
I used moto chopper, and I think that unlocks it, right?
No. That's the tool to root it.. You got it out of thread for rooting did you not? Lol. There's a how to unlock your bootloader thread. Go to that one.
Sent from my Rage MATRIX HD MAXX
deeje00 said:
No. That's the tool to root it.. You got it out of thread for rooting did you not? Lol. There's a how to unlock your bootloader thread. Go to that one.
Sent from my Rage MATRIX HD MAXX
Click to expand...
Click to collapse
You still haven't told me how I can get the other ROMs on AT&T. I have searched, but can't find it.
The roms for the razr HD will run on it. Then you just have to fix wifi and lte.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
The roms for the razr HD will run on it. Then you just have to fix wifi and lte.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
They wouldn't get any signal at all, it wasn't just LTE. I couldn't text or call.
Follow this guide. http://forum.xda-developers.com/showthread.php?t=2165746
I've used almost every razr HD rom and they all have worked.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Follow this guide. http://forum.xda-developers.com/showthread.php?t=2165746
I've used almost every razr HD rom and they all have worked.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Alright, so I finally tried to use CWM/Rom Manager to flash AOSPizza and fix LTE/Wifi, and told it to backup the current rom and wipe it, then I flashed both the rom and Gapps. Then I rebooted and it was still on stock with nothing but stock system apps and Rom Manager. I tried to restore from that backup it did. But guess what? It wiped everything and erased the backup it JUST ****ING MADE. Thanks everyone for the stock Atrix HD. At least I had separate backups with Titanium.
Good joke guys, now how do I really flash ROMs?
Now every time I turn my phone on, it says the "System is upgrading" and that it's "Starting apps...". It's really a pain in the ass to download all my apps again, with them saying they're already installed, so I have to search each one in the Play Store on my phone and install them manually. And they don't queue so I need to wait for one to finish before I tell another to download.
And, yet again, more problems. Using LMT because I hate the on-screen buttons, and the "menu" and "back" options do nothing. Meaning I can't go back a page or bring up menus.
Also according to Titanium Backup I lost my root.
Did you mount the system before flashing? No one else is having these issues.
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Did you mount the system before flashing? No one else is having these issues.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Today I went to school, came back, and now my PC won't recognize my phone, and vice-versa. Any advice?
USB ports were screwed up, got that fixed.
Mounted /system, flashed CM10 (http://forum.xda-developers.com/showthread.php?t=2228597) and it sticks on the spinning boot logo. I'm an idiot. I didn't follow directions...
Alright, now I got it up and running, got LTE fixed, but I can't fix wifi because it won't let me connect to my phone over USB. It says USB debugging is enabled with the notification, but it won't show me on my PC.
I'm sorry if this is a completely idiotic question...but where do you find the .zip file to flash in clockworkmod recovery?? That's my only problem I'm running into while trying to flash. I'm trying to flash Cyanogenmod 10 with an unlocked bootloader.
Well if your trying to install cm10 I assume you downloaded it already. And I'm gonna go ahead and assume you somehow missed the fact the file ends in .zip...
Sent from my JokerMATRIX HD MAXX
deeje00 said:
Well if your trying to install cm10 I assume you downloaded it already. And I'm gonna go ahead and assume you somehow missed the fact the file ends in .zip...
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Maybe I downloaded it to the wrong place? I put it on my computer, extracted all the files, booted my phone into clockwork recovery, wiped it, then couldnt find the zip. I really think I'm missing something vital here...
Dude you don't extract anything or use a computer.. Lmao you just download the file and that is the zip you flash.. Holy hell you made my night man lol. Your way over thinking it.. And if you were looking for a zip why would you unzip the zip? How would you even find a zip in a zip file you extracted?
Sent from my JokerMATRIX HD MAXX
See? I knew I was being stupid. So this entire time I was doing it completely wrong. Wow. You just download it to the phone then wipe and flash? I think I've got it now. Thank you
Sent from my MB886 using xda app-developers app
Yeah man easy stuff lol. Good luck.
Sent from my JokerMATRIX HD MAXX
I'm guessing this is where I use Titanium Backup to save all my apps since I'm actually making progress now.
Sent from my MB886 using xda app-developers app
Yeah backup all your apps and also create an update zip. You can flash that after the rom and gapps and it will reinstall all your apps by itself. Wouldn't hurt to create a nanodroid backup also.
Sent from my JokerMATRIX HD MAXX
About the backing up: Do you have to back up everything or just actual apps? Say for instance audio effects or live wallpapers.
Sent from my MB886 using xda app-developers app
Don't have to. I back up everything though just to be safe. So I can restore stock without a computer.
Sent from my JokerMATRIX HD MAXX
So I got CM10 up and running and kept getting an error with .android.media so I powered off. When i reboot it doesn't go past the "Warning bootloader unlocked screen". I google it and find something that says to try to wipe \sdcard. I do that and now backups and rom files are gone from CWM...I think I really screwed up this time...
EDIT: I suppose my actual question is what I do now since all the files are gone
Yea wiping the sd card was a bar idea. All of your stuff is gone now. Your gonna have to flash stock with rsd. For future reference you generally only wipe data and factory reset. Also you might wanna go and read through all the information about what everything does and how it works. Because it seems like your kinda guessing and don't really know what your doing and your gonna end up bricking your phone.
Sent from my Rage MATRIX HD MAXX
Ok, I've flashed stock before. I just get the file, remove the "getvar" lines then...transfer to phone? Last time I did this my phone was actually functioning.
.. No. Go into the android development section and get a stock rom then you put your phone in fastboot mod and flash the file through rsd lite.
Sent from my Rage MATRIX HD MAXX
So I finally downloaded the file but now my computer wont install the device drivers -_- It says it failed and I'm guessing its because the phone won't boot. Since the drivers wont install it isn't picking up the device (i think). Is there anything else I can do?
EDIT: I just remembered why we have the Internet.
Yeah.. You can go to the Motorola site and get the drivers lol.
Sent from my Rage MATRIX HD MAXX
I'm assuming I need the 4.1.1 files since you can't downgrade to ICS right?
What the heck its still not being listed as a storage option to transfer files to. Unless I'm (unsurprisingly) doing something wrong again...
Dude you don't transfer files to it. Like I said earlier put the phone in ap fastboot and flash the att firmware with rsd lite.
Sent from my JokerMATRIX HD MAXX
I'm in fastboot but after that you lost me. This is the last time I mess with my phone like this.
Good man. You don't need to brick it lol. Google a program called rsd lite. Its for your computer. Plug your phone in in fastboot mode and make sure you have the drivers installed. Then rsd will find your phone and you just install the att firmware.
Sent from my JokerMATRIX HD MAXX
The firmware thing is where I'm lost at. I don't exactly know where to get it. From a stock rom on the Development section like you said? So just download the rom onto computer and flash
http://forum.xda-developers.com/showthread.php?t=2209660
Sent from my JokerMATRIX HD MAXX
Once its downloaded I select the file so it goes in the Filename box then click start and wait right? Do I need to click one of the numbers at the bottom? BTW I really appreciate your patience with these dumb questions.
Just click start and that'll do it.
Sent from my JokerMATRIX HD MAXX
Do you have any idea why I got stuck at the "Bootloader Unlocked" screen in the first place? All i did was power the phone off.
How did you flash cm originally? And was it the one here for the Atrix?
Sent from my JokerMATRIX HD MAXX
There was a thread somewhere on the Atrix HD section saying to use the Motorola Photon Q's clockworkmod and a bunch of people were saying it worked fine. I did it and you helped me flash the rom using clockwork. The cyanogen I flashed is the one in the Development section with the working camera. I restored my stuff with titanium and it said to reboot. I was going to bed so I just hit Power Off and when i tried to turn it back on it got stuck at the bootloader unlock screen,
Did you make sure to wipe data and system along with the cache? And mount the system before flashing?
Sent from my JokerMATRIX HD MAXX
I don't know if I mounted the system...I just did exactly what the instructions on the post said: 0. Backup, then Format System
1. Install the ROM
2. Install my AHD Fix -- must disable zip file verification
3. Wipe Data/Factory Reset
4. Wipe Cache
5. Reboot and enjoy!
I did all of this.
I rooted and unlocked my bootloader. I then decided to try some new ROMs. I installed PAC and used it for a lil while. I then downloaded another. Did the install. It said Install Complete. But when I rebooted, PAC was still there. Figured I accidentally installed the same one again, so I went to the SDCARD and deleted it. Then tried again. No change.
Yes I formatted Cache and did factory reset. No change.
What am I missin?
Phone is Moto Atrix HD
Did you mount the system on the new install? Or did you install aokp? Because it looks pretty similar.
Sent from my PACMAN MATRIX HD MAXX
Mount the system? Please explain.. Please!
Go to mounts and mount system from within cwm.
Sent from my PACMAN MATRIX HD MAXX
Mount the SD Card or Mount System?
Pretty sure I said mount the system. Not the SD Card man.
Sent from my PACMAN MATRIX HD MAXX
Ok.. Mounted System.. Did the install again. Now its stuck in a loop.
Did I miss something?
Did you wipe data factory reset then mount then flash?
Sent from my PACMAN MATRIX HD MAXX
I did this time.. still looping
What rom are you trying?
Sent from my PACMAN MATRIX HD MAXX
first tried the CleanRom then tried AOKP 4.2.2. Loop on both
i had a similar issue trying to go from pac man to AOKP i ended up flashing stock with rsd and re rooted and flashed AOKP rom but you may not have to do that.
Well did you flash the stock kernel before trying to flash clean rom like the instructions say to do?
Sent from my PACMAN MATRIX HD MAXX
No I didn't. Obviously I don't read directions very well. So no I didn't.. Is there a way to just go back to stock and start all over again? What is RSD?
fastvan67 said:
No I didn't. Obviously I don't read directions very well. So no I didn't.. Is there a way to just go back to stock and start all over again? What is RSD?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2231249
your problem was you flashed a rom over another without wiping anything it doesnt work like that my man.
Nothing against you but if you can't follow easy instructions on how to do things on your phone then that's how you brick your phone.
Sent from my PACMAN MATRIX HD MAXX
Swiftb12305 said:
http://forum.xda-developers.com/showthread.php?t=2231249
your problem was you flashed a rom over another without wiping anything it doesnt work like that my man.
Click to expand...
Click to collapse
Yea.. slow learner. So how do i fix it? Will this guide get me through it?
fastvan67 said:
Yea.. slow learner. So how do i fix it? Will this guide get me through it?
Click to expand...
Click to collapse
Yes just follow it will get you back to stock.
Ok, please stay tuned.. attempting now
ok.. got error
Error!!!!!
Failed to create MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-A
Please check if the file path is too long to create or if there is enough free disk space.
So I have tried installing this rom, but I've failed many many times. I'm not sure what the problem is, but if you've already successfully installed PACman rom, please tell me your exact steps (I'm a noob)! In the mean time, here are my steps:
1. Startup Safestrap Recovery
2. Create ROM Slot: rom-slot1 (system partition size: 1024 MB, data partition size: 1 GB, cache partition size)
3. factory reset, wipe system, format data, wipe cache, wipe dalvik cache
4. Flash PACman rom (mb886_PAC_JB_4.2.2-v22.4.0_20130607-003508.zip) via SD card
5. Flash gapps (gapps-jb-20130301-signed.zip) via SD card
6. Flash Paranoid fix (I've done this step and skipped this step)
7. Wipe cache and wipe dalvik cache
^ So this doesn't work :crying:and I really want to try out this rom
... Wow no one reads ever. Do... Not... Use... Safestrap.. With.. Newer.. Roms.. It will not work. This has been posted countless times. Even says so in the Safestrap title.
Sent from my PACMAN MATRIX HD MAXX
Haha okay
Hey, sorry
What should I be using then?
EDIT: I looked around and found that I should be using ADB and stuff - the only knowledge I had was from watching the tutorial from the guy installing Infekted
Adb isn't necessary. Your bootloader is unlocked correct? Use cwm.
Sent from my PACMAN MATRIX HD MAXX
Oh, okay. I originally thought the Atrix HD wasn't supported, but it seems as though I can do something about it
Sent from my MB886 using xda premium
Supported by what?
Sent from my PACMAN MATRIX HD MAXX
I thought Atrix HD wasn't supported by CWM - it wasn't in the list of devices. I did find the tutorial from skeevydude on how to do stuff, but when I fastboot, ADB doesn't seem to recognize my phone - so I'm not sure how to install CWM anymore.
Not officially but we have our own version you have to fastboot.
Read this.
http://forum.xda-developers.com/showthread.php?t=2350721
Sent from my PACMAN MATRIX HD MAXX
I've found everything now through threads and stuff, thanks for helping! What I did was I just restored everything (flashed stock rom with RSD lite), rebooted, installed CWM, then installed the rom.
Is there a moderator up here that can remove the safestrap thread in the Atrix HD forums? This issue has to happen like 3 time a week lol.
Sent from my PACman Atrix HD
Well it's because the first custom ROM I installed (Batakang) required the use of Safestrap and I just assumed that all ROM installations were okay with Safestrap.
Kohwali said:
Well it's because the first custom ROM I installed (Batakang) required the use of Safestrap and I just assumed that all ROM installations were okay with Safestrap.
Click to expand...
Click to collapse
Lol don't worry I made that mistake when I first flashed a rom on this phone. I just think the safestrap thread should be removed because (I believe) you can still flash roms that say to use safestrap with cwm. That would make sure more people don't mess up their phones
Sent from my PACman Atrix HD
Blackest Pain said:
Lol don't worry I made that mistake when I first flashed a rom on this phone. I just think the safestrap thread should be removed because (I believe) you can still flash roms that say to use safestrap with cwm. That would make sure more people don't mess up their phones
Sent from my PACman Atrix HD
Click to expand...
Click to collapse
Skeevy mentioned last time I requested the removal of the SS3 thread, he said we still need it for people that need/want to keep their bootloaders locked for warranty reasons or whatever.
penser said:
Skeevy mentioned last time I requested the removal of the SS3 thread, he said we still need it for people that need/want to keep their bootloaders locked for warranty reasons or whatever.
Click to expand...
Click to collapse
I read something on relocking the bootloader on this site (third guy down)
http://androidforums.com/incredible-all-things-root/486704-how-relock-bootloader.html
Sent from my PACman Atrix HD
penser said:
Skeevy mentioned last time I requested the removal of the SS3 thread, he said we still need it for people that need/want to keep their bootloaders locked for warranty reasons or whatever.
Click to expand...
Click to collapse
We do. Not everyone needs or wants to be unlocked for whatever reason. Is it annoying answering these questions? Yes. This, IMHO, is a problem from people used to crack flashing and not bothering to read OPs, guides, faqs, or even use the search bar.
Blackest Pain said:
I read something on relocking the bootloader on this site (third guy down)
http://androidforums.com/incredible-all-things-root/486704-how-relock-bootloader.html
Sent from my PACman Atrix HD
Click to expand...
Click to collapse
fastboot oem lock and unlock don't work for us. The was the unlock was done we're in a (what-should-be) permanent fastboot oem unlock state.
Can I edit the title to read "[Solved]" in front?
Yeah you can. Even better instead of making new topics with each issue you have just keep them in one and change the tile.
Sent from my PACMAN MATRIX HD MAXX