[Q] updated without rooting!!!! - Galaxy S I9000 Q&A, Help & Troubleshooting

hello guys!
don't know if any one have done this before but am sure i did something really stupid!
here i have a galaxy s plus
and i tried to update it to jelly bean!
and just went to "Echn!kan"
and followed the steps ...
but i still get back to the booting menu
and tried it lots of times but nothing happened
and thin i read some where that i should root the system before doing any thing !!!
and that's what i didn't do!!!
so now i have a really a empty phone!!!
dose any one have an idea to solve this?????

Can you tell me exactly which steps you followed and what the current situation of your phone is?
As far as I know you don't need to be rooted before you flash another ROM.
You're saying "but i still get back to the booting menu", do you mean that every time you turn on the phone you end up in the recovery? In that case you are experiencing a simple bootloop which can be solved in a couple of minutes.

u need to have cwm recovery before flashing roms . stock recovery wont work , i think u ended up in a bootloop ... did u made a backup ??
flashing with odin through downlod mode will solve ur problem
HIT THANKX IF I HELPED

Marshian said:
Can you tell me exactly which steps you followed and what the current situation of your phone is?
As far as I know you don't need to be rooted before you flash another ROM.
You're saying "but i still get back to the booting menu", do you mean that every time you turn on the phone you end up in the recovery? In that case you are experiencing a simple bootloop which can be solved in a couple of minutes.
Click to expand...
Click to collapse
this is the steps i followed!
-----------------------------
Before you Proceed –>>
Make sure you have Samsung Galaxy S Plus with model number i9001 only. Trying this tutorial on a different device may eventually brick your device.
You need to have Recovery Image installed on your device. If not then check out How To Install Clockwork Mod Recovery On Samsung Galaxy S Plus i9001.
Backup all your personal information on your device.
Use AppBak to backup all your apps.
Use SMS Backup and Restore to backup messages.
You can backup your contacts using gmail .
Charge your device battery with atleast 75% of power.
Make sure that you have device drivers installed for your Samsung Galaxy S Plus. If not, then download them from here.
Enable USB Debugging mode. Go to Options > Applications > Development > USB Debugging.
How To Update Samsung Galaxy S Plus I9001 To Android Jelly Bean 4.1 | CM10 ROM
First you need to download the Cyanogen Mod 10 Rom file and Google apps package and save it to a convenient folder on your PC.
Connect your device to your PC via USB cable.
Copy the downloaded file on the internal SD card of your phone.
Now turn off your phone and boot your phone into recovery mode.
Now to get in the Recovery Mode, press and hold Volume Up + Home buttons together until recovery mode screens turns up.
Now select ‘ Wipe data/Factory reset ‘ and confirm on the next screen by pressing power button.
Now select ‘ Wipe cache ‘ and confirm by pressing power button.
Now select ‘ Advanced –> Wipe Dalvik cache ‘ and confirm by pressing power button .
Then select ‘ Flash ZIP From SD Card ‘ and then select Choose ZIP From SD Card and browse to the CyanogenMod 10 Rom zip file that you copied to your device’s SD card in step 3. Select the file and confirm by pressing power button. The installation will start.
Once the installation is finished, install the google apps package by following step 9.
When you finish installing google apps package, select ‘ Go back ‘ and select ‘ Reboot system now ‘.
Now your device will boot with the whole new Look and feel of Jelly Bean 4.1.
---------------------------------
and i meant with getting back to the menu that when i finish installing the rom and google apps i get back to the recovery menu as nothing happend!!!
and now i was disparately trying to backup the system and same nothing changes!!!
is my phone dead ?!!

dhillon7 said:
u need to have cwm recovery before flashing roms . stock recovery wont work , i think u ended up in a bootloop ... did u made a backup ??
flashing with odin through downlod mode will solve ur problem
HIT THANKX IF I HELPED
Click to expand...
Click to collapse
i did the odine step before the update!
and now am stuck in the booting menu!
what to do???

Relax, we'll be able to get your phone up and running again!
As pretty much everyone so far was already thinking, you're probably just experiencing a bootloop. This is only a minor issue, I've had it too. Just follow the instructions you find here http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If all goes well, your phone should start up in normally again. If you have any more questions just let us know.

Related

[SOLVED] Bootloop after RocketRom-boot into recovery? No CWM options, only ODIN Mode

Hi Folks
I am trying to solve the problem of my Note going into a bootloop after a Rocket Rom install. Not sure what caused it, perhaps i didnt freeze the WiFi well enough?
So here is the scenario:
Rooted and working Galaxy note with CWM installed. Current rom was backed up. Zip of Rocket Rom was placed in the sdcard folder on the phone and the phone was then rebooted into CWM Recovery mode. The "install zip from SD card" is selected and the process ran and completed with no errors.
Now, as the Note restarts, it goes into the bootloop at the Rocket Rom loading screen.
I searched for possible answers on this forum as well as other Android forums but could not find a relevant solution for the note. Other phones solutions did not work...
So now i am trying to restore the phone back to stock from backup or another rom by holding Vol+Power+Home buttons. However, this does not get me to the regular CWM scroll screen with options! It takes me to ODIN Mode big green android logo with "Downloading... Do not turn off target" under it instead... So i cant re-flash it via CWM?
Using ODIN on my PC - dont know what files to select for BOOTLOADER, PDA, PHONE, CSC... Not sure if this is the best solution either.
How can i recover my device? Thank you in advance!
I was in the same condition because installed 19_1 without 19. I flashed an older rootable stock rom with odin via PC, rooted it and installed CWM, then installed 19 and 19_1 afterwards.
Select PDA and then the .tar file. It would do. Here is a tutorial, it is the same for SGN:
http://www.youtube.com/watch?v=cEjTaFg_2Ks
Thank you i am going to try that! I actually went with v19, didnt do 19.1
Keep in mind CWM recovery is VOL UP,MENU,POWER NOT VOL DOWN.
Got me out of the same situation last night where it would only go into ODIN mode and nearly gave me a heart attack
Thank you!! I actually just figured that out a few minutes ago myself, after pressing the buttons and rebooting a bunch of times all of a sudden i booted into the CWM menu... Must have pressed the Volume UP by accident I tagged this post - might be a good tip for someone running into the same issue and doing a search on here. Such as simple solution, but if you dont know it - can be very frustrating
So the issue is solved - was able to wipe all and re-flash with Rocket v19. Now on to sync all accounts and restore all apps with Titanium back up Pro. Thanks again folks good of you to jump in and help me out.
orhon said:
I was in the same condition because installed 19_1 without 19. I flashed an older rootable stock rom with odin via PC, rooted it and installed CWM, then installed 19 and 19_1 afterwards.
Click to expand...
Click to collapse
just on that...do you reboot the phone inbetween the 19 and 19.1 or do you just choose to install 19.1 zip straight after installing 19 without rebooting the phone
I having same problem, but I still cannot go into download mode or recovery mode (CWM)..
I was using CWM to flash RocketRom V19
Any ideas guys?
Help needed
When bootloop If I press press power button long the phone turn off a while then reboot automatically.
I even tried remove the battery then try to go to CWM menu (vol up + home) then power..
Or vol down + home (download mode)..
But failed..
I'm getting scared now
---------- Post added at 01:38 AM ---------- Previous post was at 01:19 AM ----------
This thread safe my life
http://forum.xda-developers.com/showthread.php?t=1031749
From viny2cool:
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
I flash using Odin and my Note back to Life x_x
Rocket v21
Flashed couple of times exactly the way Rocket install procedure, Note goes into bootloop. Finally have to do Stock flash.Its the worst ROM I have come across for all those Android phones I used with.

I flashed a new rom, but it shows only the Droid!

HI guys, I've downloaded TiramiSlim Final V. 2.0 Rom , and I've followed all steps and reboot , but it shows only the Android Logo and the word "powered by Semaphore" so what 2 do ?
saw man said:
HI guys, I've downloaded TiramiSlim Final V. 2.0 Rom , and I've followed all steps and reboot , but it shows only the Android Logo and the word "powered by Semaphore" so what 2 do ?
Click to expand...
Click to collapse
First thing I would do is use three button combo (hold power, volume up and home button till you see I9000 screen) to see if you have CWM recovery. If you do I will need to know what you were flashing from (rom & kernel previous to the flash you got stuck on. If you don't have recovery (please try a few times as it is tricky for some people) try try three button combo with volume down button instead of up to get into download mode so you can flash with Odin on a PC. You can search on you tube for a guide or I'll check in on this thread again to see how your doing and what your previous rom and kernel were.
hey
do you have anyother rom in your SD card??other than the one u just flashed??
Can u enter to CWM??
Try that by:
1.Remove the battery and then re-insert it
2.Hold the Volume Up+Home(Center) Button+Power button TILL your phone boots i.e;Till you see "Samsung Galaxy S GT-I9000"..
If u cant, there is another way to recover your SGS...but conform that first...
thank u for trying 2 help me, yes I've a working CWR and I solved the problem, yet I'll back to stock 2.3.3(since Samsung dumped our region and we r the only how haven't got the value pack ).
I did made some many threads here and on other websites asking for a stable ICS and I've try them all but for nothing , so plz check if their any thing wrong in what I do in flashing a new Rom:
1- wipe data + cash
2- wipe devlak cash +battery state
3- go to storage and format every thing but SD card
4-flash the rom
5-sing in in my Google account than backup my contacts
6- open file manger then downloading MyBackUp Pro and restore my App's
7- sing in my FB, twitter, instgram,whatsapp,viber...
8-sync my FB contacts
9- charge my phone fully then apply battery Calibration
10- start using my phone
while after stable using(less than 24H),the notification that tells u have a low memory showed up ,also while after that FB and twitter start to force close ,than the Google Apps such Gmail & Gtalk(I even haven't use Gtalk in my life) than I got the message :the process com.google.gapps ..... force close ,also the process include the word (media) ,I turned off the phone and restart it , the phone is stack at logo, thats my story with every ICS Rom I tried​
Hey
you gotto wait for sumtime before complicating the procedure...
JUST FOLLOW THESE STEPS:
(If ur on 2.3.6 Rooted)
1.download the rom and place it in ur phones SD card,
2.wipe data,then cache mem,AND if required Dalvik cache,
3.instal ZIP form SD Card>chose the zip file and click yes,
4.after flashing the rom and addons,reboot,
Wait for sumtime and finish the setup procedure...
then flash ONLY a few software which are imp to ur use
then keep the phone like that for a few days and then install ur apps...
tchindalia said:
Hey
you gotto wait for sumtime before complicating the procedure...
JUST FOLLOW THESE STEPS:
(If ur on 2.3.6 Rooted)
1.download the rom and place it in ur phones SD card,
2.wipe data,then cache mem,AND if required Dalvik cache,
3.instal ZIP form SD Card>chose the zip file and click yes,
4.after flashing the rom and addons,reboot,
Wait for sumtime and finish the setup procedure...
then flash ONLY a few software which are imp to ur use
then keep the phone like that for a few days and then install ur apps...
Click to expand...
Click to collapse
Thx, I'll try that , but should I flash ICS on 2.3.6 or its Ok to flash it on my 2.3.3 ?
Hey
Its better if u flash ICS on 2.3.6 value pack, rooted...
Cheers
If my post helped, don't mind hitting the Thanks Button...

[Q] stable custom rom for mini2?

Hi everybody,
sorry for posting this outside the mini 2 forum, but appearently that's a developers reserved forum, so I had no rights to post there.
I would like to ask what is the latest stable custom rom developed for mini2, where to find it and possibly an instruction page.
I had good experience with CM on another galaxy before, so I checked on the the CM website first but mini 2 is not listed there
On the other end I saw a long post on the mini2 developers forum saying that CM10 was actually created, but the post is 91 pages long(!), so forgive me if I didn't read it all. Is it working?
I also checked if there was something like an "in evidence" post with instructions for newbies but couldn't see any, maybe I missed it.
Can someone point me to the right page?
thank you for your held
davide
mm in the meantime I screwed things up. I installed gapps and now it only boots in recovery mode...
why? what shall I do?
please help
thank you
davide
ok, now I'm starting to panic.
why does nobody answer, am I doing something wrong with this post?
I reinstalled the stock rom. I first tried using CWM recovery and selecting install zip file from sd card, but it didn't work: it told me BAD regarding the zip file (downloaded from sammobile), then I succeded using odin. by the way which is the correct method?
However it now seems to start, but I get in loops messages from the setupwizard that says the guided configuration has crashed and also from gapps that Google service Framework has crashed (but should gapps be wiped by the rom flash???).
the problem is that the first of the two keeps restarting and crashing so the phone doesn't do anything else then showing this messages.
please help
davide
After you flash Stock ROM via Odin. Remove battery, put it back. Boot into stock recovery - clear user data & cache and reboot. If the same error occurs try deleting /Android directory(old cache) in your sd card.
thank you for your reply, unfortunately it didn't help.
what do you mean by "stock recovery"? the recovery I see, I believe is CWM which I installed before, but I'm not sure.
anyhow from there I wiped user&cache but I had tried this before and removing teh battery didn't make a difference.
I do not have any /Android directory on my SD card.
it's a simple 4GB fat 32 partition with a single file in it (the zip with stock rom I tried to flash before using odin) and nothing else.
by the way, I used odin3 v.1.83 to flash and I selected the file using PDA button,
but I also have "bootloader", "phone" and "csc" options.
what is the difference?
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
yukdav said:
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
Click to expand...
Click to collapse
you should terminate kies before using odin. You can kill it in task manager, because kies intereferes with ODIN.
You should'nt be concerned with bootloader and the other options. As long as ur downloaded stock has tar.md5 extension you just place it in the PDA section and select Auto reboot and F. Reset time only.
Also You should only disconnect when it says PASS otherwise u will brick ur phone.
When u success fully flash ur stock rom, the chance is it will not get to homescreen
So u remove battery, reinsert it, press and hold HOME button together with POWER button, the phone boots into stock recovery, you choose wipe data and cache, then reboot. (chemicalrage explained this)
If it ain't booting into download mode u should go to service centre.
PS: My advice is to stay away from custom roms until samsung releases jelly bean for mini 2, then better custom roms will be released.

Problem with my s3 mini GT-I8190 reboot every 20 or 30 seconds

I write here to help me solve a problem with the mini s3 after turning not spend 30 seconds when powered down or rebooted ...
I did full wipes and reset from recovery and nothing .. I did the * 2767 * 3588 # either .. by odin I did a wipeI8190.md5 and nothing .. the cel turns back on as your last finished reboot .. in fact if I make a modification before they shut down or restart the phone back and not assumes the change .. and the USB debugging is not activated
I wonder if anyone happened to this and can help me.. the warranty is lost
thanks
First thing is to see if stock firmware in odin can help.
tys0n said:
First thing is to see if stock firmware in odin can help.
Click to expand...
Click to collapse
Yes is stock firmware.. theres no modificartion...
could manage to keep it active and enter the ram and select delete but when spend time the phone restart again, in fact delete all applications and messages and when I hes restart put everything back like used to be... and alsdo did the reset factory default and nothing hes restart over again with the same phone profile
flash http://megafiles.me/s/param_i8190-tar-md5 with Odin and reboot
JackoMJ said:
flash param_i8190-tar-md5 with Odin and reboot
Click to expand...
Click to collapse
also did that and still boot with the same configuration..
I'll make a video and I will upload to youtube
it seems is related to a material issue. i thought it's on your power button !
redomix said:
it seems is related to a material issue. i thought it's on your power button !
Click to expand...
Click to collapse
i dont think so.. i will post 2 videos showin the problem
here's the videos
is in spanish but i think is tunderstandable
youtube.com/watch?v=EZhKPInC5r4
and the second
youtube.com/watch?v=hT8e6T0ymJo
if you see in the last part of the second video i did the factory reset and the phone restart without nothing happend
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
redomix said:
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
Click to expand...
Click to collapse
i can not flash becouse the phone not assumes any changes.. with odin i flash in the PDA a recovery.img a CWM and nothing.. even im update from chache/fota upadte of recovery and he gave me this error...
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
i think the problem that the phone no assumes anything with flashing is because is before hes broke or whatever happend to this F%$& is the USB debugging is not marked.. but i dont really now :S
try first flashing TWRP recovery.. can really help.. !
redomix said:
try first flashing TWRP recovery.. can really help.. !
Click to expand...
Click to collapse
can i do that without USB debbugin?
how can i see a tuto or something... im really new in this.. please...
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
redomix said:
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
Click to expand...
Click to collapse
men you see the videos? i cant put the USB debbugin mode plus everytime then i flash anything on the phone when he reboot the phone no make any change. still the same like you see in the 2 videos that i post on the other messages..
thanks for trying to help.. :good:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
redomix said:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
Click to expand...
Click to collapse
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
foxdie99 said:
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
Click to expand...
Click to collapse
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
Good tutorial bro, this is the same what i'm talking about.. it should work with these method.. waiting your reply.
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
foxdie99 said:
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
Click to expand...
Click to collapse
thats strange at least for me that worked...
meybe you have a faulty memory?

Tried to flash firmware, caused an error.

I have the SM-T810 variant and my android version is 5.1.1. I was trying to flash my first custom rom,OptimalRom and recieved an error when I tried to flash the firmware that the creator linked to in the instructions. Now my device is stuck on a blue screen that says "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." I tried the smart switch, but my device won't show up. So, I gave up on recovery and decided to do a factory reset, but I can't because I can't access the TWRP from this screen with home+power+volume up. However, I can get to the odin download screen and tried flashing the same firmware again, but it doesn't work.
Is there any way to get out of this screen or have I permanently bricked my device?
No your not bricked forever and I'll show you how to fix it, first download the android 5.1.1 twrp from HERE(http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686) and make sure you have the optimalkernal and optimalrom on your sdcard or a external sd card before doing this.
1. Flash the TWRP 5.1.1 for your device with odin on the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." screen Have Auto reboot and F. Reset Time checked. NOT RE-PARTITION OR YOU WILL BRICK YOUR DEVICE!
2. let the device reboot and when the screen goes onto the samsung logo hold down the Power + Volume Down until the screen goes black, Then quickly switch to Home + Volume Up + Power and let TWRP boot up.
3. once TWRP boots up it should say that something is in Read-only mode just swipe and override permissions
4. Go into install and Find the OptimalRom and OptimalKernal Packages
5. Select OptimalRom FIRST and click Add more zips, then go to OptimalKernal and Swipe to confirm flash.
6. After the flash is done then there will be a option to wipe cache/dalvik do that.
7. Click the reboot.
8. you will come onto the samsung boot up screen with NO SOUND *hint hint*
9. It will take a while to boot up so please let it take its time.
10. tada! you now have OptimalRom installed and your device not bricked!
I did this on my tab s2 9.7" and it worked perfectly should work on yours to.
You may have a dirty install on your device (with all your apps from stock) so you can go into Twrp and do a wipe to clean all that out.
Hope I helped!
GoldSolitude said:
No your not bricked forever and I'll show you how to fix it, first download the android 5.1.1 twrp from HERE(http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686) and make sure you have the optimalkernal and optimalrom on your sdcard or a external sd card before doing this.
1. Flash the TWRP 5.1.1 for your device with odin on the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." screen Have Auto reboot and F. Reset Time checked. NOT RE-PARTITION OR YOU WILL BRICK YOUR DEVICE!
2. let the device reboot and when the screen goes onto the samsung logo hold down the Power + Volume Down until the screen goes black, Then quickly switch to Home + Volume Up + Power and let TWRP boot up.
3. once TWRP boots up it should say that something is in Read-only mode just swipe and override permissions
4. Go into install and Find the OptimalRom and OptimalKernal Packages
5. Select OptimalRom FIRST and click Add more zips, then go to OptimalKernal and Swipe to confirm flash.
6. After the flash is done then there will be a option to wipe cache/dalvik do that.
7. Click the reboot.
8. you will come onto the samsung boot up screen with NO SOUND *hint hint*
9. It will take a while to boot up so please let it take its time.
10. tada! you now have OptimalRom installed and your device not bricked!
I did this on my tab s2 9.7" and it worked perfectly should work on yours to.
You may have a dirty install on your device (with all your apps from stock) so you can go into Twrp and do a wipe to clean all that out.
Hope I helped!
Click to expand...
Click to collapse
That worked! My device runs normally and I have installed OptimalRom. Thank you very much!
EmeraldB said:
That worked! My device runs normally and I have installed OptimalRom. Thank you very much!
Click to expand...
Click to collapse
No problem!
GoldSolitude said:
No your not bricked forever and I'll show you how to fix it, first download the android 5.1.1 twrp from HERE(http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686) and make sure you have the optimalkernal and optimalrom on your sdcard or a external sd card before doing this.
1. Flash the TWRP 5.1.1 for your device with odin on the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." screen Have Auto reboot and F. Reset Time checked. NOT RE-PARTITION OR YOU WILL BRICK YOUR DEVICE!
2. let the device reboot and when the screen goes onto the samsung logo hold down the Power + Volume Down until the screen goes black, Then quickly switch to Home + Volume Up + Power and let TWRP boot up.
3. once TWRP boots up it should say that something is in Read-only mode just swipe and override permissions
4. Go into install and Find the OptimalRom and OptimalKernal Packages
5. Select OptimalRom FIRST and click Add more zips, then go to OptimalKernal and Swipe to confirm flash.
6. After the flash is done then there will be a option to wipe cache/dalvik do that.
7. Click the reboot.
8. you will come onto the samsung boot up screen with NO SOUND *hint hint*
9. It will take a while to boot up so please let it take its time.
10. tada! you now have OptimalRom installed and your device not bricked!
I did this on my tab s2 9.7" and it worked perfectly should work on yours to.
You may have a dirty install on your device (with all your apps from stock) so you can go into Twrp and do a wipe to clean all that out.
Hope I helped!
Click to expand...
Click to collapse
Good instructions. :thumbup:
GoldSolitude said:
No your not bricked forever and I'll show you how to fix it, first download the android 5.1.1 twrp from HERE(http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686) and make sure you have the optimalkernal and optimalrom on your sdcard or a external sd card before doing this.
1. Flash the TWRP 5.1.1 for your device with odin on the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." screen Have Auto reboot and F. Reset Time checked. NOT RE-PARTITION OR YOU WILL BRICK YOUR DEVICE!
2. let the device reboot and when the screen goes onto the samsung logo hold down the Power + Volume Down until the screen goes black, Then quickly switch to Home + Volume Up + Power and let TWRP boot up.
3. once TWRP boots up it should say that something is in Read-only mode just swipe and override permissions
4. Go into install and Find the OptimalRom and OptimalKernal Packages
5. Select OptimalRom FIRST and click Add more zips, then go to OptimalKernal and Swipe to confirm flash.
6. After the flash is done then there will be a option to wipe cache/dalvik do that.
7. Click the reboot.
8. you will come onto the samsung boot up screen with NO SOUND *hint hint*
9. It will take a while to boot up so please let it take its time.
10. tada! you now have OptimalRom installed and your device not bricked!
I did this on my tab s2 9.7" and it worked perfectly should work on yours to.
You may have a dirty install on your device (with all your apps from stock) so you can go into Twrp and do a wipe to clean all that out.
Hope I helped!
Click to expand...
Click to collapse
I have the Nook 8" and this write up helped a lot. Got my unit up and running again, thanks.
But I've also tried to get it back to the original (or more precisely stock 710) and keep running into issues. I'm currently rooted and have twrp, the OptimalKernal and ROM installed. I think my problem is order of steps and which utility I should be using for each (ODIN or twrp install).
Any help would be greatly appreciated.
davidzvi said:
I have the Nook 8" and this write up helped a lot. Got my unit up and running again, thanks.
But I've also tried to get it back to the original (or more precisely stock 710) and keep running into issues. I'm currently rooted and have twrp, the OptimalKernal and ROM installed. I think my problem is order of steps and which utility I should be using for each (ODIN or twrp install).
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Should try the smart switch pc tool to go back to stock.
Sent from my SM-T810 using Tapatalk
GoldSolitude said:
Should try the smart switch pc tool to go back to stock.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I'll give it a try, but will it go back to Nook stock or Tab S2 stock? I'm looking to get to Tab S2 stock.
And the answer is -----
Straight Tab S2 :highfive:
Hi guys, I have the same issue. I have a T715Y model i purchased and it was not my language in there. So i tried to flash a stock rom from T715 ( i made it by mistake i didn't see the Y letter first) model but I have an error "occurend while updating the device software. Use the Emergency Recovery function in the Smart Switch PC Software" but it doesn't work with this software even with kies.
I just want to go stock but I don't know from witch country my tab s2 is provided. I say that because I downloaded a stock rom from sammobile for T715Y model from either the Malaysia or Thailand one's but I have a Failed Red Flag from odin.
Can Anyone help me. My TAC: 353403 and FAC: 07 Whitch country's T715Y model stock rom do I choose.
Thanks A lot.
doudaix said:
Hi guys, I have the same issue. I have a T715Y model i purchased and it was not my language in there. So i tried to flash a stock rom from T715 ( i made it by mistake i didn't see the Y letter first) model but I have an error "occurend while updating the device software. Use the Emergency Recovery function in the Smart Switch PC Software" but it doesn't work with this software even with kies.
I just want to go stock but I don't know from witch country my tab s2 is provided. I say that because I downloaded a stock rom from sammobile for T715Y model from either the Malaysia or Thailand one's but I have a Failed Red Flag from odin.
Can Anyone help me. My TAC: 353403 and FAC: 07 Whitch country's T715Y model stock rom do I choose.
Thanks A lot.
Click to expand...
Click to collapse
I have never really had luck with the Emergency Software Recovery function on Smart Switch, only the Device Initialization tab. It does wipe everything out, but it did work for me.
doudaix said:
Hi guys, I have the same issue. I have a T715Y model i purchased and it was not my language in there. So i tried to flash a stock rom from T715 ( i made it by mistake i didn't see the Y letter first) model but I have an error "occurend while updating the device software. Use the Emergency Recovery function in the Smart Switch PC Software" but it doesn't work with this software even with kies.
I just want to go stock but I don't know from witch country my tab s2 is provided. I say that because I downloaded a stock rom from sammobile for T715Y model from either the Malaysia or Thailand one's but I have a Failed Red Flag from odin.
Can Anyone help me. My TAC: 353403 and FAC: 07 Whitch country's T715Y model stock rom do I choose.
Thanks A lot.
Click to expand...
Click to collapse
Flash the latest version of the T715Y. Think Samsung boatloader does not allow downgrades.
Sent from my SM-T810 using Tapatalk
Hi all,
The emergency software recovery didn't solve the problem. Even the newest firmware. The shop gave me a new one ...happy end
But i never face that kind of impossibility to install original firmware
Trap at step 4
Hey guys, I have the same problem with you and right now, I am fixing myself. At the moment, I am trapped at step 4. I don't understand about optimalkernal and optimalrom. Could you guys explain me about that and where can i download that files.
Thanks A lot.
---------- Post added at 09:24 PM ---------- Previous post was at 09:19 PM ----------
GoldSolitude said:
No your not bricked forever and I'll show you how to fix it, first download the android 5.1.1 twrp from HERE(http://forum.xda-developers.com/tab-s2/development/recovery-twrp-2-8-7-x-lollipop-5-1-1-t3205686) and make sure you have the optimalkernal and optimalrom on your sdcard or a external sd card before doing this.
1. Flash the TWRP 5.1.1 for your device with odin on the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software." screen Have Auto reboot and F. Reset Time checked. NOT RE-PARTITION OR YOU WILL BRICK YOUR DEVICE!
2. let the device reboot and when the screen goes onto the samsung logo hold down the Power + Volume Down until the screen goes black, Then quickly switch to Home + Volume Up + Power and let TWRP boot up.
3. once TWRP boots up it should say that something is in Read-only mode just swipe and override permissions
4. Go into install and Find the OptimalRom and OptimalKernal Packages
5. Select OptimalRom FIRST and click Add more zips, then go to OptimalKernal and Swipe to confirm flash.
6. After the flash is done then there will be a option to wipe cache/dalvik do that.
7. Click the reboot.
8. you will come onto the samsung boot up screen with NO SOUND *hint hint*
9. It will take a while to boot up so please let it take its time.
10. tada! you now have OptimalRom installed and your device not bricked!
I did this on my tab s2 9.7" and it worked perfectly should work on yours to.
You may have a dirty install on your device (with all your apps from stock) so you can go into Twrp and do a wipe to clean all that out.
Hope I helped!
Click to expand...
Click to collapse
Hey guys, I got the same problem on my Samsung tabs2, I found your guide very useful. However, I am trapped at step 4. because I don't know where can i download "optimalkernal and optimalrom". Could you explain it for me please!!
Thanks alot.

Categories

Resources