PSN>> MEMORY-MOD-v2 SwapAll-v3.0 KERNEL MODDER
USE THIS AT YOUR OWN RISK
INFO:
MEMORY-MOD
SD-EXT partition (/dev/block/mmcblk0p2) on phone's memory card is mounted as /data instead of original internal data partition(stl13)
SWAPALL v3.0
Original Internal Storage (/dev/stl13 on stock GB & /dev/block/stl13 on AOSP) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
Swappiness set at 30.
Q.) WHATS NEW WITH MEMORY-MOD v2 IN THIS "KERNEL PATCHER" ???
A.) It simply patches an existing flashed kernel on phone
It extracts an existing flashed kernel from the phone
Then it extracts ramdisk from the kernel
Then it patches the required files on ramdisk
Then it builds back ramdisk and compiles back boot.img
Then it flashes the modded boot.img on phone to the phone
REFERENCE Threads: (my ACE threads)
http://forum.xda-developers.com/showthread.php?t=1883211 Memory modded ACE Stock kernels
http://forum.xda-developers.com/showthread.php?t=1960652 Memory modded ACE CM7 kernels
http://forum.xda-developers.com/showthread.php?t=1959779 Memory modded ACE ICS/JB kernels
http://forum.xda-developers.com/showthread.php?t=2184189 SIMILAR KERNEL PATCHER for ACE
PREREQUISITES:
1: Custom kernel to be flashed before installing this script (STOCK based/AOSP/AOKP with ext4 support and init.d support but not Mem-Modded)
2: SD-EXT partition on sdcard formatted to ext4 (u can use this tool PSN_EXT4_Recovery_based_SD-EXT_ONLY_Format_Tool-signed.zip)
3: SWAP support implemented in kernel
4: Atleast 2.1 MB of free space available in /system
5: An SDCARD of CLASS 6 or more (class 4 users please dont report of phone crawling slow!)
NOTE:
1: for fresh install only; user data on original /data will not be moved on /sd-ext; after flashing this script you will have to setup ur phone again.
1: after flashing this you wont be able to directly do a nandroid backup in cwm; so wipe(format) "/data" in recovery before attempting nandroid backup.
2: do not use any int.d script to expand memory using /sd-ext like S2E or a2sd or cronmod or a2sdx etc with this mod else your phone will not boot
3: your phone will boot always as first boot with this script if no memory-card inserted or memory-card inserted without a sd-ext partition
4: Memory-Mod v2 will delete the init.d scrips of adrenaline engine which when unmodified is not compatible with Memory-Mods
5: if your rom has Adrenaline Engine 4.3 or 4.4 which has not been modified by for compatibility with Memory-Mod then you can reflash a compatible Adrenaline Engine 4.4 by flashing this(STOCK version / CM version) AFTER flashing the MEMORY-MOD script.
6: to reflash newer fixed versions of this mod you have to reflash ur non-patched kernel or rom and then flash this kernel patcher in recovery.
Some info:
PSN_STOCK-GB_MEM-MOD-v2_SWAPALLv3.0 : coming soon (provide me with stock-based custom kernel link or boot.img)
PSN_CM7.2-GB-official_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels on official cm7.2 roms
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on unofficial cm10.1 kernels in roms like Rohans CM10.1 builds
ICS users can try JB version... its almost same .. should work... report if it doesnt work for u
UNINSTALL METHOD: (to get back to old-school 150MB internal data)
1: flash your original non-modded kernel or custom rom
2: flash PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip
3: you need to setup your phone all over again for old-school 150MB internal data.
CHANGELOGS
Memory-Mod v2
boot.img extracted from bml8 partition on phone
it is split into kernel zImage and ramdisk
it extracts ramdisk and patches required files
it packs the modded ramdisk and builds back boot.img ready to be flashed back to phone
it flashes the boot.img to phone !!
hello psn..nice to see u in mini section
will try it out and report..thanks
edit = maybe u can build us ur kernel with battery extender modules ? just a suggestion..
Nice work.. nice to see an Indian, Maharashtrian from Aamchi Mumbai..!!
A chemical engineer n still interest in android...!! I need to contact u.. for some tips for my future studies..
Awesome I had this idea and googled around but nothing for Jellybean 4.2 or like that. Everyone nays for that SD wear.
The Alchemist said:
hello psn..nice to see u in mini section
will try it out and report..thanks
edit = maybe u can build us ur kernel with battery extender modules ? just a suggestion..
Click to expand...
Click to collapse
possible
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
psndna88 said:
possible
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
Click to expand...
Click to collapse
Can I install this in rohan builds?
Enviado desde mi GT-P3110 usando Tapatalk 2
moliverac8 said:
Can I install this in rohan builds?
Enviado desde mi GT-P3110 usando Tapatalk 2
Click to expand...
Click to collapse
thats a cm10.1 JB ... provide me with its boot.img in its zip and ill upload a JB version too
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
psndna88 said:
thats a cm10.1 JB ... provide me with its boot.img in its zip and ill upload a JB version too
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
Click to expand...
Click to collapse
Here you are https://www.dropbox.com/s/5seqed4y318uvp9/boot.img
Enviado desde mi GT-P3110 usando Tapatalk 2
JB support available
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on unofficial cm10.1 kernels in roms like Rohans CM10.1 builds
feedback !!!
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Tried with 5.0.2.8 Again nothing on both roms.
ill recheck..
Sent from I9300 Jellybam v6.7 4.2.2 (CM10.1+AOKP+PAC) + Yank Kernel v1.5 with latest Mali 400MP driver support.
can you do it for cm10 link to boot.img
https://www.dropbox.com/s/6g3ozr6lbep7nb3/boot.img
prafiles said:
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Click to expand...
Click to collapse
Confirmed.
not working on Cm 10.1 build 20130310
prafiles said:
Didn't work for both AOKP and CM10.1 Tried various things that might have went wrong from my side. I am using CWMR 6.0.2.7. Other than that no script. Stock roms. Ur patch runs fine. Phone boots fine. But no SD-Ext mounted nor Internal Mem is mounted as swap.
Click to expand...
Click to collapse
prafiles said:
Tried with 5.0.2.8 Again nothing on both roms.
Click to expand...
Click to collapse
darkshadow1997 said:
can you do it for cm10 link to boot.img
https://www.dropbox.com/s/6g3ozr6lbep7nb3/boot.img
Click to expand...
Click to collapse
ic92 said:
Confirmed.
not working on Cm 10.1 build 20130310
Click to expand...
Click to collapse
uploaded another reworked CM10.1 kernel patcher... try it...
psndna88 said:
uploaded another reworked CM10.1 kernel patcher... try it...
Click to expand...
Click to collapse
Still not working. Same results as before.
tried this on CM7, booted but no ext4 partition
Don't working on CM10.1
Enviado desde mi GT-S5570 usando Tapatalk 2
Related
CyanogenMod 7.2 Specific BASIC Kernel - Cooperve
We are planning to release a kernel that con work on both devices, a BCM21553-common kernel, but that is hard work, as we must compare all the files from kernel, and test everychange.
FEATURES:
Due to the kernel is pretty advanced, we are not talking of a TO-DO list, we are talking about a FEATURES list, so the FEATURES are:
Kernel just compatible with CM7
Specific Basic - Samsung official not-modded sources
EXT4 support
CWM Inclluded on kernel with EXT4 support too
Images of CWM patched to show good colors
Bluetooth and Wifi configs added to work with CM7
Common ramdisk used based on kissingmylove and PsychoGame
Ramdisk optimized for CM7 and EXT4
Compressed through LZMA
IMEI working on CM7
Offline charging working on EXT4 CM7
SOURCES:
KERNEL SOURCE (GPL) is the official samsung kernel, as it is a specific BASIC kernel:
Sources of kernel: http://opensource.samsung.com/
I needed to modify the configs to get a BT, Wifi, and EXT4 working, this is not included on Samsung stock kernel, so I leave here the config source:
Source of defconfigs: https://github.com/broadcomCM/android_kernel_bcm21553-common_configs
Ramdisk has been also modd to create a bcm21553-common ramdisk that all users could use. SOurces to ramdisk can be found extracting from my kernel (LZMA) or also on github.
Sources of Ramdisk: https://github.com/broadcomCM/android_device_samsung_bcm21553-common_ramdisk
If other kernel developers want to contribute on this, shot me a PM, and I'll talk with you.
Thanks, Biel.
CHANGELOG
Version 4.0
Same build as version 3.0 , #7
Bigger cleanup ever made on ramdisk, to match CM7 and CM9 requiriments.
Added new BroadcomCM temp. CWM, with colors fixed.
Reduced booting time
Built with first 100% BCM21553 common ramdisk working based on AOSP ROMs.
Version 3.0
Clean Ramdisk as always
Included EXT4 and RFS (for not causing bricks) mounts on init.charge.rc
Start EXT4-fix in init.charge to mount syste, data, cache on inir.charge.rc and solve offline charging.
Version 2.1
Cleaned Ramdisk
Added permissions to camfash - for CM7
New built from same source and config
Version 2.0
Re-built ramdisk based on kissingmylove ramdisk
Delete all tweaks he added - BASIC KERNEL
EXT4 file system support for CM7
Hacked CWM Images to have a good color (no blues anymore)
Added some bootscripts to have better compatiblity with EXT4
Recovery has been updated to CWM 5.0.2.8
Mount USB mass storage is now working
CWM "HD" Edition, much more clear and tiny
Much more faster recovery
Version 1.0
First release of this kernel builded from source
First kernel with my name on it
Added new modify it ramdisk
Compressed throug LZMA using Lopicl.00 kitchen
Added CONFIG_SENSORS_COOPERVE=y
Added all the configs necessary to use Bluetooth on CM
Bluetooth working on new CM7 release, which should be RC1
Fixed CM7 bootanimation - thanks Prototype-U
Version 0.1
First release of this kernel
Not builded from source
Using Hell-lock kernel (Prototype-U) as zImage base
Modify lopicl.00 ramdisk and ad it to this kernel
Used LZMA to compress ramdisk
Fixed WIFI and torch on the ramdisk CM7.2
Not compatible with STOCK!
Issues with the kernel:
SIM contacts reading
Sometimes CWM can not find cache/recovery/log
DOWNLOADS
All downloads can be found here:
DOWNLOAD HERE
Last kernel verison download:
http://www.mediafire.com/download/7188za13itwcnim/kernel_CM7_v4.0_cooperve.zip
THANKS
BroadcomCM Team
Spacecaker
Lopicl.00
Kissingmylove
Percy-g2
Others:
Savie
Prototype-U
First poster! xD
By the way, I can help you, but I have to learn more about kernels! (you know! Mentioned in chat! )
Inviato dal mio GT-S5830i con Tapatalk 2
PM sent.
Man, seeing this and not being able to help makes me feel useless.
Sent from my GT-S5830i using xda app-developers app
Nice work biel, appreciate it.
mathm2013 said:
Man, seeing this and not being able to help makes me feel useless.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Dude, dont feel useless. Maybe we are not as experienced as them, different people are better at different things. So relax.
Sent from my GT-S5830i
Great,:thumbup:
my kernel also coming .
Sent from my LT22i using Tapatalk 2
First kernel built. On samsung sources, and just zImage at the moment. Dunno if will boot or not keeping u informed.
bieltv.3 said:
First kernel built. On samsung sources, and just zImage at the moment. Dunno if will boot or not keeping u informed.
Click to expand...
Click to collapse
I can check.
Only then how to restore the phone, if one does not work?
Maslin Sergey said:
I can check.
Only then how to restore the phone, if one does not work?
Click to expand...
Click to collapse
Flash another kernel bro if it won't work
Sent from my GT-S5830i using xda premium
biel can you do a git diff and git status with the boot.img of yours and the boot.img of hell lock/rafael ?
with that we can see what has changed and fix it on the sources
Sent from my S500 using xda app-developers app
SpaceCaker said:
biel can you do a git diff and git status with the boot.img of yours and the boot.img of hell lock/rafael ?
with that we can see what has changed and fix it on the sources
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
I cant make a diff from a boot.img
If nkt working flash with ODIN solve problems
Enviado desde mi GT-S5830 usando Tapatalk 2
bieltv.3 said:
I cant make a diff from a boot.img
If nkt working flash with ODIN solve problems
Enviado desde mi GT-S5830 usando Tapatalk 2
Click to expand...
Click to collapse
no from extracted boot.img i meant
Sent from my S500 using xda app-developers app
SpaceCaker said:
no from extracted boot.img i meant
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
Yes well I'll push changes to kernel asap as I make
Other idea:
Okey guys I got it after lot of searching and thinking + confirmed by psyke83 (developer from Galaxy 5) the reason why not booting is the kernel. ANd it's weird because Hell-lock kernel was fine till now
http://pastebin.com/zYFQf8Z0
Error could seem a ROM error, but init.rc script must to be modifyied to locate dalvik. Probaly dalvik and cahce in EXT4. So we need the port from the other kernel to work new CM7. That will be long without the device, really long...
Thanks, Biel
bieltv.3 said:
Yes well I'll push changes to kernel asap as I make
Other idea:
Okey guys I got it after lot of searching and thinking + confirmed by psyke83 (developer from Galaxy 5) the reason why not booting is the kernel. ANd it's weird because Hell-lock kernel was fine till now
http://pastebin.com/zYFQf8Z0
Error could seem a ROM error, but init.rc script must to be modifyied to locate dalvik. Probaly dalvik and cahce in EXT4. So we need the port from the other kernel to work new CM7. That will be long without the device, really long...
Thanks, Biel
Click to expand...
Click to collapse
also change the bootclasspath to the proper CM7 BootClassPath
Trying to port PsychoGame's 2.6.35.14 kernel... https://github.com/Lopicl/android_kernel_samsung_cooperve_cm_port-2.6.35.14
Lopicl.00 said:
Trying to port PsychoGame's 2.6.35.14 kernel... https://github.com/Lopicl/android_kernel_samsung_cooperve_cm_port-2.6.35.14
Click to expand...
Click to collapse
That is done already by me, psychogame and kissingmylove. Give a try, you will probably give us more information about it.
Enviado desde mi Nexus 7 usando Tapatalk 2
hello everyone i wanna ask something
i am stock rom 2.3.6 ace but i am reverting to latest mardon stable build cm 10.1 but before that i wanna try some combinations please tell whether they are worth a shot
1 pure performance + fly on mod + nims kernel
2 pure performance + fly on mod + battery extender kernel
3 pure performance + fly on mod on stock kernel
4 pure performance + fly on mod + crossbreeder on stock kernel
5 pure performance + fly on mod + crossbreeder + adrenaline engine on stock kernel
which is the best combo for performance and descent battery life
please reply fast i a waiting
aditya rathee said:
hello everyone i wanna ask something
i am stock rom 2.3.6 ace but i am reverting to latest mardon stable build cm 10.1 but before that i wanna try some combinations please tell whether they are worth a shot
1 pure performance + fly on mod + nims kernel
2 pure performance + fly on mod + battery extender kernel
3 pure performance + fly on mod on stock kernel
4 pure performance + fly on mod + crossbreeder on stock kernel
5 pure performance + fly on mod + crossbreeder + adrenaline engine on stock kernel
which is the best combo for performance and descent battery life
please reply fast i a waiting
Click to expand...
Click to collapse
3, 4 and 5 option aren't possible... you need a CUSTOM kernel to use those scripts and an init.d folder ...
Viper The Ripper said:
3, 4 and 5 option aren't possible... you need a CUSTOM kernel to use those scripts and an init.d folder ...
Click to expand...
Click to collapse
thanks sir but please can you tell me what mistake i did
1 flashed stock 2.3.6 on my ace through odin
2 placed update1 file on sd card and rooted phone by applying update from sd
3 installed cwm
4 flashed battery extender kernel {without mounting anything}
5 rebooted and saw superuser icon disappear
please help me
also before flashing intext+ do i have to mount data and system and after flashing do i have to format sdext and also mount something after that to make script work
aditya rathee said:
thanks sir but please can you tell me what mistake i did
1 flashed stock 2.3.6 on my ace through odin
2 placed update1 file on sd card and rooted phone by applying update from sd
3 installed cwm
4 flashed battery extender kernel {without mounting anything}
5 rebooted and saw superuser icon disappear
please help me
also before flashing intext+ do i have to mount data and system and after flashing do i have to format sdext and also mount something after that to make script work
Click to expand...
Click to collapse
You need an .ext2/3/4 partition (sd-ext)
1. Root your device
2. Install CWM 5.0.2.6 Fixed
3. Flash Battery Extender kernel/ ROM
4. Flashing the script:
>>> mount data
>>> mount system
>>> mount sd-ext
>>> format SD-EXT (YOUR EXTERNAL PARTITION, NOT YOUR SD!)
5. Flash the script!
It should work
Pure performance and Fly On mod are not compatible, you'll mess up your phone if you install them toghether. Read carefully all threads.
I recommend not to use combination of different scripts/tweaks. I tried pure performances x & supercharger v6 on stock & lost data connection for weeks. The same happened with other combos (can't remember which). Flashing stock via odin didn't help either ! So better be careful & don't use any combo. Try them as a lone. They work great.
Sent from my GT-S5830 using xda premium
Venomous Viper 119 said:
I recommend not to use combination of different scripts/tweaks. I tried pure performances x & supercharger v6 on stock & lost data connection for weeks. The same happened with other combos (can't remember which). Flashing stock via odin didn't help either ! So better be careful & don't use any combo. Try them as a lone. They work great.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Aren't already parts of supercharger in pureperformance?
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
Aren't already parts of supercharger in pureperformance?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
May be.. But my intention was just experimentation.
Sent from my GT-S5830 using xda premium
Hi everybody!
Since IZS v2 I'm having problem with speed, recording videos, slow screen wakeup, etc... In order to solve this problem, here is the IZS Kernel Diana3 v0.4.
The kernel is based on this commits:
https://github.com/Huexxx/diana3
https://github.com/Huexxx/diana3RD
But have a difference, it have SWAP support!
I recommend to use IZS v1.1 as base and flash this kernel.
In order to use swap, flash TURBO BOOST: http://forum.xda-developers.com/showthread.php?t=2145133
I have configured dual SWAP: 50Mb in Cache and 120Mb in SYSTEM.
To install:
Make a NANDROID!
Go to recovery and flash the ZIP
Wipe cache and dalvik cache
Reboot
If you want, I can share some tweaks I use
Note: Use this kernel at your own risk. I don't have problems but that doesn't mean you wont have them. Some users reported that this kernel brick their phone. Since I can't replicate that (and I'm not a dev), I can't help much.
Big thanks to Huexxx and Evisceration!
dcop7 said:
Hi everybody!
Since IZS v2 I'm having problem with speed, recording videos, etc... In order to solve this problem, here is the IZS Kernel Diana3 v0.4.
The kernel is based on this commits:
https://github.com/Huexxx/diana3
https://github.com/Huexxx/diana3RD
But have a difference, it have SWAP support!
I recommend to use IZS v1.1 as base and flash this kernel.
In order to use swap, flash TURBO BOOST: http://forum.xda-developers.com/showthread.php?t=2145133
I have configured dual SWAP: 50Mb in Cache and 120Mb in SYSTEM.
To install:
Make a NANDROID!
Go to recovery and flash the ZIP
Wipe cache and dalvik cache
Reboot
If you want, I can share some tweaks I use
Note: Use this kernel at your own risk. I don't have problems but that doesn't mean you wont have them.
Big thanks to Huexxx and Evisceration!
Click to expand...
Click to collapse
I don't get it, I'd flash the v1.1 of the IZS and flaah this kernel right?
Sent from my LG-P970 using XDA Premium 4 mobile app
jantdroid said:
I don't get it, I'd flash the v1.1 of the IZS and flaah this kernel right?
Sent from my LG-P970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can flash this over any version of ICS official (but I only test this on IZSv1.1 and IZSv2). My recommendation is to flash IZSv1 + IZSv1.1 update and then this kernel. This weekend I've wipe my phone and put IZSv1 + IZSv1.1 update and then flashed this kernel and it feel much faster.
Why izs v1.1 and not 0.6 kernel with swap,do u find it better just asking mate,cause izs v2 has stuff like disable fast dormacy,enable f sync,?Also do u think that kind of swap is better from sd card swap,cause with 300mb of sd card swap i could play games i could not before,oh yeah why 40 swap value better than 60?
Alucard said:
Why izs v1.1 and not 0.6 kernel with swap,do u find it better just asking mate,cause izs v2 has stuff like disable fast dormacy,enable f sync,?Also do u think that kind of swap is better from sd card swap,cause with 300mb of sd card swap i could play games i could not before,oh yeah why 40 swap value better than 60?
Click to expand...
Click to collapse
Because 0.6 kernel have at least 2 problems: slow screen wakeup and video recording. With this, it is solved.
Using swap from sdcard, and I quote from TURBO BOOST thread:
Disadvantages of a swap file on your sdcard:
A sdcard is always slower than internal memory
You may NEVER unmount the sdcard or connect your phone to your computer, because you then just kill your swap file – it is the same as pulling out the Ram of your running computer!
Disadvantages of a swap partition on your sdcard a.k.a. HARD SWAP:
A sdcard is always slower than internal memory
You will need a separate partition on your sdcard
You can connect the sdcard to your computer, but you cannot unmount and remove it without powering off your phone – you would kill your swap space immediately!
Click to expand...
Click to collapse
Bye the way, if you have enough space in /data, you can have triple swap. In the limit, I would say 50MB in /cache, 150MB in /system and whatever space left in /data. Just try and see.
Thanks for your hard work. its really good
It didnt boot on izs v1.1 neither on izs v2,it stuck on lg boot logo not the bootanimation,what the hell??????
Alucard said:
It didnt boot on izs v1.1 neither on izs v2,it stuck on lg boot logo not the bootanimation,what the hell??????
Click to expand...
Click to collapse
That happened to me but I've manage to made it work. Does the touch buttons light up?
dcop7 said:
That happened to me but I've manage to made it work. Does the touch buttons light up?
Click to expand...
Click to collapse
I think so,but i started flashing from the start and tried trasmusic izs v1.1,and then izs v2,dude izs v2 is way faster,didnt notice anything with camera or lockscreen,but can u share me the files to replace to have 40 swappiness,is it really worth it compared to 60 and why mate?
Alucard said:
I think so,but i started flashing from the start and tried trasmusic izs v1.1,and then izs v2,dude izs v2 is way faster,didnt notice anything with camera or lockscreen,but can u share me the files to replace to have 40 swappiness,is it really worth it compared to 60 and why mate?
Click to expand...
Click to collapse
To change swappiness in IZS a little tricky. But here is the flash for IZSv1 and IZSv2.
The less value in swappiness favor more RAM. The RAM is faster than the swap files. But that depends on your usage. I have swappiness at 60 now.
Information about swappiness:
http://forum.xda-developers.com/showpost.php?p=21775937&postcount=2
or/and
http://en.wikipedia.org/wiki/Swappiness
dcop7 said:
Information about swappiness:
http://forum.xda-developers.com/showpost.php?p=21775937&postcount=2
or/and
http://en.wikipedia.org/wiki/Swappiness
Click to expand...
Click to collapse
Thanks dude ,so this is diana v0.4 with swap cause 0.6 has already 60 swappiness?
Alucard said:
Thanks dude ,so this is diana v0.4 with swap cause 0.6 has already 60 swappiness?
Click to expand...
Click to collapse
No. It is only the kernel. If you use TURBO BOOST it makes swappiness at 100. If you flash the zip in the previous post, you will have 60
@dcop7: is it possible to have source or patch of the swap modification in kernel?
furb3t said:
@dcop7: is it possible to have source or patch of the swap modification in kernel?
Click to expand...
Click to collapse
In here: https://github.com/Huexxx/diana3/blob/v0.4/arch/arm/configs/black_diana3_v0.4_defconfig
Change
# CONFIG_SWAP is not set
Click to expand...
Click to collapse
to
CONFIG_SWAP=y
Click to expand...
Click to collapse
So what should i flash? Turbo Boost or your swappiness modification file?
Edit. Turbo Boost is really good, but I can only use dual swap (cache + system), because with swap in data phone will not boot.
matbla91 said:
So what should i flash? Turbo Boost or your swappiness modification file?
Edit. Turbo Boost is really good, but I can only use dual swap (cache + system), because with swap in data phone will not boot.
Click to expand...
Click to collapse
Both The TURBO BOOST implements the swap, the swappiness modification file changes only a few values in swappiness.
I have yet one question about fsync. What is it and should it be marked?
matbla91 said:
I have yet one question about fsync. What is it and should it be marked?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33381928
I personally don't have it marked,
ASK
hello, i'm husni. i want ask. i have flashing this kernel. but my device can not boot up? i use rom base v30c. what wrong? please help me. thanks
hi i flashing CronMod Unofficial but not worked help me intrnal be full :| i can flashin this scrip on rafael bugies kernel and working
but not working bieltv3 :|
partition on SD card EXT4
ROM : CM 7.2 RC4
kernel : bieltv3 v 3.0 #7 > suport EXT4
pls help me
4550286 said:
hi i flashing CronMod Unofficial but not worked help me intrnal be full :| i can flashin this scrip on rafael bugies kernel and working
but not working bieltv3 :|
partition on SD card EXT4
ROM : CM 7.2 RC4
kernel : bieltv3 v 3.0 #7 > suport EXT4
pls help me
Click to expand...
Click to collapse
First of all it is not the correct section, next time use GT-S5830i Q&A Thread
BTW look at this thread
forum.xda-developers.com/showthread.php?t=2468740
CyanogenMod 7.2 Specific BASIC Kernel - Tassve
We are planning to release a kernel that con work on both devices, a BCM21553-common kernel, but that is hard work, as we must compare all the files from kernel, and test everychange.
FEATURES:
Due to the kernel is pretty advanced, we are not talking of a TO-DO list, we are talking about a FEATURES list, so the FEATURES are:
Kernel just compatible with CM7
Specific Basic - Samsung official not-modded sources
EXT4 support
CWM Inclluded on kernel with EXT4 support too
Images of CWM patched to show good colors
Bluetooth and Wifi configs added to work with CM7
Common ramdisk used based on kissingmylove and PsychoGame
Ramdisk optimized for CM7 and EXT4
Compressed through LZMA
IMEI working on CM7
Offline charging working on EXT4 CM7
Added our new temp. CWM as default
SOURCES:
KERNEL SOURCE (GPL) is the official samsung kernel, as it is a specific BASIC kernel:
Sources of kernel: http://opensource.samsung.com/
I needed to modify the configs to get a BT, Wifi, and EXT4 working, this is not included on Samsung stock kernel, so I leave here the config source:
Source of defconfigs: https://github.com/broadcomCM/android_kernel_bcm21553-common_configs
Ramdisk has been also modd to create a bcm21553-common ramdisk that all users could use. SOurces to ramdisk can be found extracting from my kernel (LZMA) or also on github.
Sources of Ramdisk: https://github.com/broadcomCM/android_device_samsung_bcm21553-common_ramdisk
If other kernel developers want to contribute on this, shot me a PM, and I'll talk with you.
Thanks, Biel.
CHANGELOG
Version 4.0
Same build as version 3.0 , #7
Bigger cleanup ever made on ramdisk, to match CM7 and CM9 requiriments.
Added new BroadcomCM temp. CWM, with colors fixed.
Reduced booting time
Built with first 100% BCM21553 common ramdisk working based on AOSP ROMs.
Version 3.0
Clean Ramdisk as always
Included EXT4 and RFS (for not causing bricks) mounts on init.charge.rc
Start EXT4-fix in init.charge to mount syste, data, cache on inir.charge.rc and solve offline charging.
Version 2.1
Cleaned Ramdisk
Added permissions to camfash - for CM7
New built from same source and config
Version 2.0
Re-built ramdisk based on kissingmylove ramdisk
Delete all tweaks he added - BASIC KERNEL
EXT4 file system support for CM7
Hacked CWM Images to have a good color (no blues anymore)
Added some bootscripts to have better compatiblity with EXT4
Recovery has been updated to CWM 5.0.2.8
Mount USB mass storage is now working
CWM "HD" Edition, much more clear and tiny
Much more faster recovery
Version 1.0
First release of this kernel builded from source
First kernel with my name on it
Added new modify it ramdisk
Compressed throug LZMA using Lopicl.00 kitchen
Added CONFIG_SENSORS_COOPERVE=y
Added all the configs necessary to use Bluetooth on CM
Bluetooth working on new CM7 release, which should be RC1
Fixed CM7 bootanimation - thanks Prototype-U
Version 0.1
First release of this kernel
Not builded from source
Using Hell-lock kernel (Prototype-U) as zImage base
Modify lopicl.00 ramdisk and ad it to this kernel
Used LZMA to compress ramdisk
Fixed WIFI and torch on the ramdisk CM7.2
Not compatible with STOCK!
Issues with the kernel:
SIM contacts reading
Sometimes CWM can not find cache/recovery/log
DOWNLOADS
Last kernel verison download:
http://www.mediafire.com/download/v5q74y90hg348iu/kernel_CM7_v4.0_tassve.zip
THANKS
BroadcomCM Team
Spacecaker
Lopicl.00
Kissingmylove
Percy-g2
Others:
Savie
Prototype-U
RESERVED
Why only two frequencies? And I like governor "lagfree"..
And on CM 7 by Percy BT not work..
Gisha 7 said:
Why only two frequencies? And I like governor "lagfree"..
And on CM 7 by Percy BT not work..
Click to expand...
Click to collapse
Use my cm, thats why it is my kernel
Enviado desde mi Nexus 7 mediante Tapatalk
@bieltv.3 always the best biel waiting for Rc_4 for tassve \o/
Gisha 7 said:
Why only two frequencies? And I like governor "lagfree"..
And on CM 7 by Percy BT not work..
Click to expand...
Click to collapse
this kernel,as written in the thread's title is a basic kernel so it has only stock frequences and stock governors
@bieltv.3
good work :thumbup:
Sent from my BCM21553 using Tapatalk 2
Reserved
Sent from my GT-S5830i using Tapatalk 2
What sense in only two frequencies?
And at me not work wipe and format /data on kernel recovery..
Gisha 7 said:
What sense in only two frequencies?
And at me not work wipe and format /data on kernel recovery..
Click to expand...
Click to collapse
I am not a kernel expert, so I just wanted to made the basic (stock kernel) compatible with ext4, lzma, and CM/AOSp roms. There are kernels better? Yes, but not with this compatibility
EDIT: wiping data working on my kernel amd CM7 (on ace-i, verified)
Enviado desde mi Nexus 7 mediante Tapatalk
Aclerometer doesnt work on cm7_tassve_rc01 @bieltv.3
If I Helped You Please Press ThankS
Thanks for reports guys, Ill try to fix them as soon as possible. A logcat will help me
Enviado desde mi C5303 mediante Tapatalk
How i can make logcat for you
If I Helped You Please Press ThankS
myaservip said:
How i can make logcat for you
If I Helped You Please Press ThankS
Click to expand...
Click to collapse
google it.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
burak144 said:
google it.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
Click to expand...
Click to collapse
do the link2sd deep sleep problem fixed with this kernal ?
thebiggboss180 said:
do the link2sd deep sleep problem fixed with this kernal ?
Click to expand...
Click to collapse
i dont know. cuz i havent tried yet.
Galaxy Pop Plus'ımdan Tapatalk 2 ile gönderildi.
thebiggboss180 said:
do the link2sd deep sleep problem fixed with this kernal ?
Click to expand...
Click to collapse
Yes the only bug in rotation...etc
If I Helped You Please Press ThankS
i installed the kernal...i got a problem that the data partition not mounting while using the phone normal
i cant install apps to the data parition and when i do reboot the device make a reset