hi everyone,
i have tab p1000 and tab sprint sph-p100,
all condition is brick and loop to logo samsung.
where to buy board for tab p1000 and sprint p100?
If you get the logo you're not bricked. Try a factory reset on your recovery. If that doesn't work Odin to stock.
Sent from my SAMSUNG-SGH-I727
gtab p1000 it's blank screen and not detected on pc.
for sprint sph p100 is stuck in logo samsung.
now , iam try unbrick from thread http://forum.xda-developers.com/showthread.php?t=1877585
If your stuck on the Samsung logo that means you previously were rooted and tried to flash aosp and now you restore to Odin and it won't boot because your tablet isnt formated correctly to boot into stock easy fix all you have to do is download the stock r17 ROM I believe and a pit file and you should be good
Sent from my SCH-I605 using xda app-developers app
jazz995756 said:
If your stuck on the Samsung logo that means you previously were rooted and tried to flash aosp and now you restore to Odin and it won't boot because your tablet isnt formated correctly to boot into stock easy fix all you have to do is download the stock r17 ROM I believe and a pit file and you should be good
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I have the same issue. I have a VZW TAB, Do you know where I can get the correct PIT from and stock rom?
harshybar said:
I have the same issue. I have a VZW TAB, Do you know where I can get the correct PIT from and stock rom?
Click to expand...
Click to collapse
try http://devphone.org/samsung-galaxy-...ega-development-starter-thread/msg747/#msg747
I try for tab sprint p100 from thread http://forum.xda-developers.com/showthread.php?t=1877585 it's succesfully. but it for tab p100.
for tab p1000 how?? because tab not detected on pc and power on not respond. still dead.
yneb123 said:
try http://devphone.org/samsung-galaxy-...ega-development-starter-thread/msg747/#msg747
I try for tab sprint p100 from thread http://forum.xda-developers.com/showthread.php?t=1877585 it's succesfully. but it for tab p100.
for tab p1000 how?? because tab not detected on pc and power on not respond. still dead.
Click to expand...
Click to collapse
first thing you should do is plug it in to the mains socket and let it charge for at least 4 hours. it could take longer. sounds like your battery might be totally discharged.
---------- Post added at 04:31 PM ---------- Previous post was at 04:23 PM ----------
it would help to know more about what happened to put the tab out of order.
if you manage to get your battery to charge and you have a gsm tab then follow this guide exactly:
http://forum.xda-developers.com/showthread.php?t=1881981
ff
Hard Bricked
Hey:
I have a dead Samsung Galaxy Tab SGH-T849 (T-Mobile). My son washed it to clean it up :/
It was initially booting but in loop, so I tried to install a new custom rom and it went completely dead and wont even boot up now.
Is there a way I can fix this?
I will also appreciate if you can please advise if the exact manufacturing part number for the motherboard if you have it?
Related
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
So I tried getting into recovery via ROM Manager, and the tab just stopped operating. Now I'm stuck at the Samsung logo.
So far I've tried reflashing to stock firmware with Odin via Download mode, but no luck. The thing still sits on the Samsung logo.
I don't know if this is apart of the soft-brick symptoms, but everytime I plug it in to charge, I get a white screen instead of the usual battery icon.
Please advise! I don't mind running through the steps again! Any advise would be appreciated!
first, do you own a Verizon/Sprint/Latin America?
If yes, check the files and use the correct firmware and kernel.
If you own a unlocked Galaxy Tab flash the stock gingerbread. You can find it in the download section
in overcome page (p1000.teamovercome.com)
I currently own the T-Mobile version, p1000. I just saw the teamovercome page. I'll try it again through their instructions. Fingers crossed!
Thanks for the reply!!
If you can not into download mode there is a way to fix it. Download mode shows the triangle with android digging.
Sent from my GT-P1000 using XDA App
I think you need to flash a new kernel. The times I have been stock at samsung logo on the tab it was a kernel issue. Hopefully you can find the kernel that goes with your rom...if you can odin is your friend. You are not dead yet.
Sent from my SPH-D710 using XDA App
Hello,
did you get your GalTab back? I have that(?), a very similar(?) problem too... so I'm interessed in a solution...
Thanks!
Let me give you a tip if you bricked your phone.
I accidentally flashed Checkrom for galaxy s2 into my note.
The phone was bricked, i couldn't get to the recovery mode. Using the volume+power+home key combo only displayed a f*** up screen and then rebooted.
I noticed that if I did this with the phone plugged into the computer, my PCwould actually recognize something being plugged.
What I did:
I ran the already-rooted.bat that came with the rooting toolkit (zergrush)
And thank to god my phone booted (as a Samsung galaxy s2!), well it did not boot at first, it was stuck loading but i could go into recovery mode. After that my phone actually booted as an s2 (all messed up), but I could eventually wipe it clean.
So, if for any reason your phone gets bricked you might want to try this (cause removing battery doesn't do s**t)
I'm glad you solved it. But have to ask how the Fu** did you flash a. Sgs2 rom. Do you not read?
Sent from my GT-N7000 using Tapatalk
use usb jig on your sgs2 to remove the triangle and back to download mode
thehackersz said:
use usb jig on your sgs2 to remove the triangle and back to download mode
Click to expand...
Click to collapse
Dude read. He flashed the wrong rom into his SAMSUNG GALAXY NOTE not his sgs2..... man op doesn't read and flashes an s2 rom on a fricking note and this guy doesn't read anything....
Sent from my GT-N7000 using Tapatalk
Wow....
Sent from my SGH-T839 using XDA
dautmost said:
Wow....
Sent from my SGH-T839 using XDA
Click to expand...
Click to collapse
Hate if u want. But cmon ppl
Sent from my GT-N7000 using Tapatalk
I did the same
I was selling my SGS2 the same day as I received my note. Was bussy rooting and unrooting and moving files from SGS2 to Note. On that time Chekrom for note and SGS2 was both v.4 "do i need to say more" some kernels swits internal and external SD in CWM. and i was using my sd to move files, I lost my IMEI in the proces, I had a struggle getting it back
In my defense, the checkrom rom was labeled XWLA4_CheckromRevo_HD_V6.zip for the s2 and XXLA4_CheckromRevo_NoteHD_V5.zip for the note. I was doing a bunch of stuff and its not like the file names are totally different.
I made a mistake, and I won't be the last to make it. Someone might benefit from my experience.
I have exactly same problem !please tell the toolkit method
gastoncho said:
Let me give you a tip if you bricked your phone.
I accidentally flashed Checkrom for galaxy s2 into my note.
The phone was bricked, i couldn't get to the recovery mode. Using the volume+power+home key combo only displayed a f*** up screen and then rebooted.
I noticed that if I did this with the phone plugged into the computer, my PCwould actually recognize something being plugged.
What I did:
I ran the already-rooted.bat that came with the rooting toolkit (zergrush)
And thank to god my phone booted (as a Samsung galaxy s2!), well it did not boot at first, it was stuck loading but i could go into recovery mode. After that my phone actually booted as an s2 (all messed up), but I could eventually wipe it clean.
So, if for any reason your phone gets bricked you might want to try this (cause removing battery doesn't do s**t)
Click to expand...
Click to collapse
please tell the toolkit site etc and every thing you did! I HAVE the same problem and i am dying because my galaxy note is bricked!IF you tell me the whole procedure like the toolkit site etc then i will be very very thankful to you !please tell i beg!
gastoncho said:
Let me give you a tip if you bricked your phone.
I accidentally flashed Checkrom for galaxy s2 into my note.
The phone was bricked, i couldn't get to the recovery mode. Using the volume+power+home key combo only displayed a f*** up screen and then rebooted.
I noticed that if I did this with the phone plugged into the computer, my PCwould actually recognize something being plugged.
What I did:
I ran the already-rooted.bat that came with the rooting toolkit (zergrush)
And thank to god my phone booted (as a Samsung galaxy s2!), well it did not boot at first, it was stuck loading but i could go into recovery mode. After that my phone actually booted as an s2 (all messed up), but I could eventually wipe it clean.
So, if for any reason your phone gets bricked you might want to try this (cause removing battery doesn't do s**t)
Click to expand...
Click to collapse
Why didnt't u flashing stock rom using pc odin???
Maybe it would help u...
Sent from my GT-N7000 using Tapatalk 2
Hey guys, they gave me a Sprint Galaxy Tab 7". When it boots up it goes directly to Android system Recovery. and it shows there a ton of red letters.
I have tried flashing with odin a whole bunch of firmwares. All say Success and pass. But when it restarts it goes back where i started. Sometimes when it boost it goes to the samsung logo. then the sprint 4g then back to samsung logo and stays there.
I saw a old thread that a guy had the same problem with his boss's tab. but i dont know if and how he resolved it.
Any help would be appreciated.
Did you flashed the correct kernel?
Sent from my GT-P1000 using XDA
salahmed said:
Did you flashed the correct kernel?
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
where can i get the kernel and do i flash with odin?
Ok i tried flashing everything available still no go. I think it ha to do something with the EXT file system.
Maybe the file system is formatted to EXT and all the firmwares are RFS or something.
not sure how to get by this.
if that is the case, then flash any stock firmware that has .pit file with ODIN and choose to "repartiton" will get you back to RFS.
I guess that wasn't the the case. just tried 3 different firmwares with the pit files. still boots to the Android recovery then after i restarts it boots normal. then sprint 4g then restarts to samsung glowing logo. and just loops there.
missed the part about the 4G.
Have you been flashing correct rom?
In this forum people are all posting onfor for SPH-P100 and SCH-I800
What exactly is your device model?
I have the Sprint Galaxy Tab 7" - It says SPH-P100
Ok, since I don't have CDMA device, can't help you much.
But I wonder, has it always have the Sprint 4G logo from the beginning?
Or others who has the device can chime in?
If it has always been there, that means I am just clueless about sprint device.
If it only appear after your failed flash, could be that it now has a bootloader of another device.
Can you boot into download mode?
---------- Post added at 11:50 AM ---------- Previous post was at 11:47 AM ----------
if so, download the right firmware and flash via odin. it worked for me, though mine was a gsm tab. you can get them from www.samfirmware.com and download a correct pit file
http://forum.xda-developers.com/showthread.php?t=1275031&highlight=stock+ef17
Try this one.
Ive Tried that one about 1 dozen times.
Yes it has always had the 4G logo.
Yes i can go into download mode.
To me it seems like the internal storage is corrupt or something.
This seems like i can't fix it. If anyone thinks they can fix it ill ship it to them.
You need to flash stock rom via odin aswell as a pit file and tick re-partition.
I have been trying to root my Samsung Galaxy S I9000 without success. I used Odin and flashed I9000XXJVK_kernel.tar but when I switched the phone it doesn't boot. It is stuck on the Galaxy S GT-I9000 white logo with black background. I then tried to install using Odin the CF Root-XW-XEN-JS3v1.3-BusyBox but it failed installing on Odin. Now the worst has happened. My Samsung Galaxy S i9000 will not switch on now. All I get on the display when I try to boot is an exclimation mark icon in the middle of a phone and PC icon. I fear it is bricked.
Anyone know how I can save my phone?
Please advise
I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?
Artmuzz said:
I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?
Click to expand...
Click to collapse
If you need only rooting without cwm then use unlock root Google for it its easy and simple and never brick your phone
Press thanks if helped
Sent from my GT-I9000 using xda premium
Artmuzz said:
I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?
Click to expand...
Click to collapse
Follow http://forum.xda-developers.com/showthread.php?t=2057161
Artmuzz said:
I have been trying to root my Samsung Galaxy S I9000 without success. I used Odin and flashed I9000XXJVK_kernel.tar but when I switched the phone it doesn't boot. It is stuck on the Galaxy S GT-I9000 white logo with black background. I then tried to install using Odin the CF Root-XW-XEN-JS3v1.3-BusyBox but it failed installing on Odin. Now the worst has happened. My Samsung Galaxy S i9000 will not switch on now. All I get on the display when I try to boot is an exclimation mark icon in the middle of a phone and PC icon. I fear it is bricked.
Anyone know how I can save my phone?
Please advise
Click to expand...
Click to collapse
Hey, I need your help bro..
I got my samsung bricked just like you explained here.
http://forum.xda-developers.com/showthread.php?t=2203696
I am stuck at the exclamation mark icon in the middle of a phone and PC icon.
How did you get it working? Can you explain in clear steps? Please!
Any help would be much appreciated !
dipenrique said:
Hey, I need your help bro..
I got my samsung bricked just like you explained here.
http://forum.xda-developers.com/showthread.php?t=2203696
I am stuck at the exclamation mark icon in the middle of a phone and PC icon.
How did you get it working? Can you explain in clear steps? Please!
Any help would be much appreciated !
Click to expand...
Click to collapse
hey m8
check this
http://forum.xda-developers.com/showthread.php?p=7564212
it happened to me too