Database Develop

[q] phone maybe bricked after lpy cwm format help!!!

Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do

[Q] Odin stuck on SetupConnection

Hi guys,
Im trying to root my I9305 and Oding keeps getting stuck.
Following this thread to the T and all i can come up with, is this log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Im using the cable it came with, in a working port.....

Ok so i just decided to try for some reason putting the CWM file on and install it through recovery....it failed....so i went back to DL mode and tried the flash again....and hey presto, it worked!
not exactly sure why, maybe being in recovery, my computer picked up the missing driver to make it all work, but so far it seems the have magically solved itself :good:
thanks XDA, your the best

[Q] Odin Write Operation Failing

My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ORALT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?

[Q] i cant upgrade to tizen

hi,
well i have a galaxy gear v700, and i tryed to flash it before but i couldnt do well, after it i think it has a brick . but using this tutorial http://forum.xda-developers.com/showthread.php?t=2776157 i give my watch a new life, now i want to upgrade to tizen and i cant, kies tell me that the firmware was modify and no upgrade avable, and when i try to put a rom odin doesnt load, and stop on the last point that i show here what can i do to upgrade to tizen
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> kernel-GB-3a.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Firmware update start..
<ID:0/003> zImage

my Smart Watch Bloked

samsung tizen not responding
sir,
i own a samsung tizen z1 ,the device is not responding only logo sign is shown, i decided to flash it but md5 bootloader is locked so not able to flash -using odin software i need bootloader file to flash it and unlock it.. plz help
radekamilo said:
hi,
well i have a galaxy gear v700, and i tryed to flash it before but i couldnt do well, after it i think it has a brick . but using this tutorial http://forum.xda-developers.com/showthread.php?t=2776157 i give my watch a new life, now i want to upgrade to tizen and i cant, kies tell me that the firmware was modify and no upgrade avable, and when i try to put a rom odin doesnt load, and stop on the last point that i show here what can i do to upgrade to tizen
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> kernel-GB-3a.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
Click to expand...
Click to collapse

Hello there, need help with Samsung Galaxy Cam 2

Today i bought this camere without OS, only needs to put the stock rom to it, i get this from odin when i try to flash it:
MY MODEL: EK-GC200ZWAXAR
LOG
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC200XXUCNK4_GC200OXACNK4_GC200XXU_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Already tried with a different cable and port