Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do
Hello,
I did the JellyBlast custom ROM to my Galaxy Mini+ GT-S5570I but it lacked Arabic support and it was buggy with Twitter and LinkedIn apps, so I wanted to go back to the stock rom.
Unfortunately I didn't backup the stock ROM, so I googled and found my stock ROM through this:
sammobile.com/firmwares
I tried to flash it using Odin, it gave me this output at the beginning:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5570IJPLF1_S5570iOJPLE2_S5570IXXLD6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
After that when I tried again it's stuck at
Code:
<ID:0/009> SetupConnection..
Now I am stuck with this stupid ROM and I cant get back to my stock one.. Any help please?
U need to flash with 3 separated files.
Follow this POST
My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ORALT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?
So I'm trying to root my SM-G925I on 6.0.1 using Auto-Root and Odin. I got the right file, the latest odin. Put my phone into download, it registers on odin. Load it on AP and hit start. Then, I get this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
And it obviously fails. Any suggestions?
EDIT: Now it gets stuck at "Get PIT for mapping..."
Probably because you aren't suppose to use any version of Odin for the S6 except "Odin3_v3.10.6"
Maqical said:
Probably because you aren't suppose to use any version of Odin for the S6 except "Odin3_v3.10.6"
Click to expand...
Click to collapse
Hmmm...Just tried with that version and it gets stuck on Get PIT for Mapping. Any other suggestions? Thanks.
Thanks! It worked when I switched computer.
So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]
Could be that the internal storage is faulty and needs repaired.
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?
eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.
iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk
where is that root file via odin @yashthemw ?
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this