Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do
Hi there, i've followed all the steps to download odin and the md5 file to install recovery but it always gets stuck in odin and says failed after some time.
im on a vista notebook (borrowed it, cos im a mac user)
any help?
Taptapdude said:
Hi there, i've followed all the steps to download odin and the md5 file to install recovery but it always gets stuck in odin and says failed after some time.
im on a vista notebook (borrowed it, cos im a mac user)
any help?
Click to expand...
Click to collapse
this is the message on odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
tried it a few times and sometimes the leftmost block shows recovery but nothing happens even after a long time.
what am i missing?
Are you rooting first or flashing recovery first?
Using using to flash recovery
Sent from my GT-I9305 using Tapatalk 2
Bump
Sent from my GT-I9305 using Tapatalk 2
Hi guys,
Im trying to root my I9305 and Oding keeps getting stuck.
Following this thread to the T and all i can come up with, is this log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Im using the cable it came with, in a working port.....
Ok so i just decided to try for some reason putting the CWM file on and install it through recovery....it failed....so i went back to DL mode and tried the flash again....and hey presto, it worked!
not exactly sure why, maybe being in recovery, my computer picked up the missing driver to make it all work, but so far it seems the have magically solved itself :good:
thanks XDA, your the best
My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ORALT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?
So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]
Could be that the internal storage is faulty and needs repaired.
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?
eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.
iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk
where is that root file via odin @yashthemw ?
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this