Database Develop

USB problem

Hey all,
Due to a recent problem with my USB port on my phone (I stuck my pen in when trying to reset it!), I have the following issue.
My phone now thinks that I have my USB headphones permanently plugged in. Therefore, there communication is completely messed up. I can make a call and hear the other person, but no-one can here me, and the sound is permanently off.
The issue with the USB cannot be resolved or fixed unless I send it off for repair (I've had the phone longer than the warranty), and my contract is due for renewal in 2 months.
So, my question is this ... Is there any way the USB functionality can be switch off completely using software? Or can I force my phone somehow to bypass the USB headphone issue.
I have tried using 'speaker' in call, but this does not work.
Any help / advice would be much appreciate.
Ratzz

if you search around the NUMEROUS threads about usb port issues and failures, you will find that MOST problems (like yours) are caused by misaligned/shorted pins on the port.
use a magnifying glass and look closely and see if you can get the pins to pop back into place so that they no longer short each other, etc.

ASCIIker said:
if you search around the NUMEROUS threads about usb port issues and failures, you will find that MOST problems (like yours) are caused by misaligned/shorted pins on the port.
use a magnifying glass and look closely and see if you can get the pins to pop back into place so that they no longer short each other, etc.
Click to expand...
Click to collapse
I have read ALL of the NUMEROUS threads referring to this issue and the fixes.
I cannot re-align the pins as they have become too damaged, and would have done this if I could have done.
I understand the problem (as detailed in my initial thread), and wondered if there was a work around for my SPECIFIC problem.
Perhaps I should have said that I have read ALL the NUMEROUS threads relating to this problem, but ........... you get the idea.

Easy fix....contact www.ppctechs.com they can repair and have a quick turnaround time. I have had both of my Tilts repaired their.

jdwilson said:
Easy fix....contact www.ppctechs.com they can repair and have a quick turnaround time. I have had both of my Tilts repaired their.
Click to expand...
Click to collapse
Thanks for that - they are US based, and I'm UK.
Also, would rather not put any money into this with the contract ending in September.

Dropped phone, memory access?

Hello everyone, I've searched all over for an answer to this one with no joy.
I've had my stock Orange locked Diamond for almost two years now, and towards the end of a family break I dropped it.
Now it won't switch on beyond an initial buzz, and none of the mini USB chargers or pc cables will persuade it to charge.
The problem is that I used it to take all the photos during the family break, and now can't access them.
Now I read the reply about "jump" charging the battery and will be giving that a go, but can the memory chip be accessed independantly to offload the contents?
I should add that for quite a while before, the phone picked up and dropped the usb connection when connected with a frequency of about 3 - 5 seconds, which was very annoying.
Many thanks in advance
Luke

Little update
Hello all, thank you for reading about my plight.
Well I managed to charge the battery, and I think the phone switches on, as the volume controls make the appropriate sounds. However the screen is black, and even under heavy sun I can't see anything, so it's not just the backlighting that's gone.
The pc doesn't notice it when I connect, so I can't get in that way, unless someone can point me to how to chop up a cable and hardwire a data connection "upstream" of the mini-USB socket? (I'm hoping it's just the connector which is dead)
Otherwise, is there a combination of hardware buttons that will switch on bluetooth? I dropped it when it was in airplane mode. I had BT explorer checked, so if I can get BT on, I should be able to browse the phone with the pc? Please confirm.
Looking forward to reading your suggestions
Cheers
Luke
ps now I've discovered the limitations of a fixed memory; if the card were removable, all this wouldn't be an issue.

Your solution
http://forum.xda-developers.com/showthread.php?t=657514

Thanks, I'll give it a try
Hi, thanks for the tip, I guess I have nothing to lose.
I've just found an appropriate screwdriver so here goes.
I saw that thread, but as one of the symptoms involved actually being able to read something on the screen, I didn't pay that much attention.
News soon.
Cheers
Luke

ok let me know.. best of luck

OMG it worked!
Hi, fantastic tutorial.
It took me several attempts to realise that when you say "chip" you mean circuit board.
Pressing and pressing gave no joy, but further investigation showed that I could slip the screwdriver underneath the loose connector and engage it from there.
Yes bad design on HTC's part, there should be some sort of physical lock, or at least a block underneath that pushes the connector into its socket.
However nice the phone was, the WM6 bugs & glitches were annoying, the USB connection still doing that really annoying thing of connecting and disconnecting every few seconds, so it's going to be hard to retrieve the photos; GRRR!
Does anyone know of a program that can block send files from the phone, either over wifi or bluetooth??
Anyway, many many thanks Siddharthsai, at least it's up and running. I doubt I'll be using it much now, despite that superb screen, my insurance replaced it with a Desire, and I have to say I'm impressed with my new toy
Oh yes, where's the command for auto screen lock? It's annoying me.
Many thanks again
Luke

Getting there
OK so thanks to Diamond tweak I was able to stop the screen locking every 5 seconds.
The USB problem is mechanical; I forced the phone down onto its mini USB plug really hard and it stayed connected. Thanks to SuperCopier 2 I was able to dump the contents before my hand got cramp
Yippee.
So I've got TomTom on the diamond, but no on-board nav on the Desire. My diamond might just end up relegated to being the permanent in car nav unit.
Anyone got a fix for the dodgy USB problem? I've tried all 3 of my mini-usb cables, but they do all happen to be HTC oem.
I guess that's why the micro USB has been adopted.
Thanks
Luke

Keep screen on while docked? CM7

I swear there is a setting to keep the screen on while charging or docked but I cannot find it.
It would logically be under settings/display but its not.
Running CM7 latest nightly currently, and I swear I have seen the option, although maybe on a different Rom?.
I want to keep the screen from timing out while in my car dock. It stays on with CarHome Ultra but if I get a call the screen times out and then wont go back to to CarHome.
Any suggestions?

FireRaider said:
I swear there is a setting to keep the screen on while charging or docked but I cannot find it.
It would logically be under settings/display but its not.
Running CM7 latest nightly currently, and I swear I have seen the option, although maybe on a different Rom?.
I want to keep the screen from timing out while in my car dock. It stays on with CarHome Ultra but if I get a call the screen times out and then wont go back to to CarHome.
Any suggestions?
Click to expand...
Click to collapse
Settings / Application / Development. Now if you want to know why it is there instead of display, that one I can't answer

Thank you! I knew I had seen it someplace.
Applications certainly does seem an odd place for it.
sent from XDA app

i FOUND THE solution i have exactly the same problem 2 days i tried resetting , formating, hard reset, even rooting to diffrent rooms the problem was never solved .
i had following problem
1. the phone will automatically swtich to docking, its annoying
2.some time i got old galaxy s 1 home screen
3. when i put a battery it will show its charging which im not charging and will pop a msg high volage, also.
its not a software issue which ibelieve but the USB hub under your phone, due having contacts with moisture new phones wont have this problem, im not saying u guys may had dipped ur phone, but having ur phone in ur pocket or sweat is 1st problem and having a bath and ur phone is in toilet,
HERE IS THE SOLUTION
get a alocohol from pharmacy and wool, get a tooth pick put the small cotton at the head and run ur usb HUB rema phone has to be off take batt out, after cleaning u will see the USB hub is clean alot of dirt removed, then wait 5-10 min to dry never plug charger or else u will pay for ur mistake, after 10min turn ur phone on it will be total fine.
ITS THE DIRT WHICH IS STICK ON PIN 4-5 making Problem.
i hope it can help tht how it work for me

[Q] Turn Off Check Battery Cover Warning

Any way to turn off the Check Battery Cover Warning?
It appears whenever you restart or unplug your device.

Metalli-Nut said:
Any way to turn off the Check Battery Cover Warning?
It appears whenever you restart or unplug your device.
Click to expand...
Click to collapse
I was getting it constantly too but it turns out this is warning you that your back cover is not sealed all the way. You need to put the back cover properly by starting by pressing from the center out (near the camera is the first snap that needs to be pressed in) and continue to press down outwards like the arrows show on the plastic cover that was on the back when you received the phone.

I get this on every reboot and I have pressed the back cover onto the phone as good as possible.
Is my phone broken somehow or is that normal behaviour?
It appears for a few seconds after unlocking until touchwiz seems to redraw.
I don't get it constantly but only on reboot. I'd like my phone to be watersealed.

whitepaw said:
I get this on every reboot and I have pressed the back cover onto the phone as good as possible.
Is my phone broken somehow or is that normal behaviour?
It appears for a few seconds after unlocking until touchwiz seems to redraw.
I don't get it constantly but only on reboot. I'd like my phone to be watersealed.
Click to expand...
Click to collapse
It's normal, no worries. You should also get a warning about the usb port cover whenever you unplug a charger. These are just normal behaviors for the phone, reminding people to double check and make sure everything is sealed up properly.

karmuh said:
It's normal, no worries. You should also get a warning about the usb port cover whenever you unplug a charger. These are just normal behaviors for the phone, reminding people to double check and make sure everything is sealed up properly.
Click to expand...
Click to collapse
+1.
Spot on - This is a generic message and does not mean your back is not secure, I see no sensor that the device could use to determine that the back or usb cover is not fully sealed. No way there is a switch at every tab for the back.
As for the USB cover I also get that after unplugging the USB and every reboot. Regardless of actual cover position.

After numerous times of seeing the warnings, I'm pretty sure I could keep it sealed without being notified…
A way to remove these annoying warnings would make using this phone a whole lot more pleasant..
Sent from my SM-G900F

subbaz said:
After numerous times of seeing the warnings, I'm pretty sure I could keep it sealed without being notified…
A way to remove these annoying warnings would make using this phone a whole lot more pleasant..
Sent from my SM-G900F
Click to expand...
Click to collapse
"Xposed G-Touchwiz"
https://play.google.com/store/apps/details?id=com.gertlily.xposed.touchwiz
Must have root and exposed installed and activated woKS great
If I've helped in any way please click thanks

Since I've been using the Qi charger I never see the warnings, another nice little benefit of going wireless. I'd forgotten about them until I moved music over via USB.

delawaredrew said:
Since I've been using the Qi charger I never see the warnings, another nice little benefit of going wireless. I'd forgotten about them until I moved music over via USB.
Click to expand...
Click to collapse
Forgot I had the qi pad on and decided to take an under water photo bad idea.

Metalli-Nut said:
Any way to turn off the Check Battery Cover Warning?
It appears whenever you restart or unplug your device.
Click to expand...
Click to collapse
Follow this guide you will be sent in less then 5 minutes
http://forum.xda-developers.com/showpost.php?p=53508476&postcount=4

galaxy s4 nutjob said:
"Xposed G-Touchwiz"
https://play.google.com/store/apps/details?id=com.gertlily.xposed.touchwiz
Must have root and exposed installed and activated woKS great
If I've helped in any way please click thanks
Click to expand...
Click to collapse
this app worked a treat! thanks man!

No prob those pop ups are super annoying

Strangely it didnt work for me. Even after several reboots.
nk33 said:
this app worked a treat! thanks man!
Click to expand...
Click to collapse

Chyldsh said:
Strangely it didnt work for me. Even after several reboots.
Click to expand...
Click to collapse
You can try http://forum.xda-developers.com/showthread.php?t=2808701

Looking under the PopupuiReceiver.apk (Under the manifest), there is mention of "BATTERY_COVER_WATERPROOF_POPUP" as an action. It is pluable that there is an inclusion for the USB and that by decomiling and removing the strings, the annoying pop ups will be removed.

cybhunter said:
Looking under the PopupuiReceiver.apk (Under the manifest), there is mention of "BATTERY_COVER_WATERPROOF_POPUP" as an action. It is pluable that there is an inclusion for the USB and that by decomiling and removing the strings, the annoying pop ups will be removed.
Click to expand...
Click to collapse
decompile popupuireciever.apk
go to /res/values/bools.xml
change the values for popup warning s (i dont remember the exact name but there is only three items in bools.xml) all should say false.
recompile and push back to your device.
WARNING!!!
DO NOT make any changes in the manifest.xml file

" "
Must have root and exposed installed and activated woKS great
If I've helped in any way please click thanks[/QUOTE]
I am so glad I ran into this, that pop up screen is most annoying, especially with a bad ca let on a bumpy road.
However, before I run it .... I have the s5 Active G870A. Will this work on the G870A as well? I read the info at that link, but I'm not clear as to if it will work. Can you please help?
Thank you

cstayton said:
decompile popupuireciever.apk
go to /res/values/bools.xml
change the values for popup warning s (i dont remember the exact name but there is only three items in bools.xml) all should say false.
recompile and push back to your device.
WARNING!!!
DO NOT make any changes in the manifest.xml file
Click to expand...
Click to collapse
You can also just freeze popupuireciever kn TiBu
Sent from my SM-G900A using Tapatalk

CC updates and reboots non-stop since Aug 2014. No answer from Google.

Hi all. I have this issue with my CC.
In two words:
One day CC received an update, downloaded it to 100% and rebooted. After reboot update process started again. And again. This started in Aug 2014.
Tried to use original wall charger, with and without HDMI extender. Result is the same.
Factory reset doesn`t work (both - from app and by holding button). CC reboots and begins to download the update again. Without initial setup because it still remembers the configuration.
The only way to get to main screen and use the APP - is to disconnect WAN cable from router, so CC will use the WiFi network without Internet access.
Found this thread in Google Support, posted a reply. The sympthoms and all actions are the same.
https://productforums.google.com/forum/#!topic/chromecast/3L4KNPi7BIU[1-25]
In the end of Aug CC started to work normally.
For a week.
And since Sep it is useless piece of plastic for me and others in that thread of Google Support Forums.
Any ideas how to bring it to life back? Device is not rooted. Firmware version is 16041.
I was thinking of buying Teensy, but want to give a last shot here.

For me something like that happened. When it was updating, make a factory reset and when it reboots, unplug it.
Make sure that you plug it to a wall plug and using a convenient adaptor to power the chromecast. Then, plug to HDMI again, and USB and, for me, it finished.
Also check the noise of the adaptor. Put it near your ear and listen if the sound is normal. Also, if still failing, try another adaptor.

fer456 said:
For me something like that happened. When it was updating, make a factory reset and when it reboots, unplug it.
Make sure that you plug it to a wall plug and using a convenient adaptor to power the chromecast. Then, plug to HDMI again, and USB and, for me, it finished.
Also check the noise of the adaptor. Put it near your ear and listen if the sound is normal. Also, if still failing, try another adaptor.
Click to expand...
Click to collapse
Thanks for trying to help. I have tried all of cables and adaptors and TVs I have. I dont know which combos of reset+plug+unplug I have tried for this 6 months.

k3nny2k said:
Thanks for trying to help. I have tried all of cables and adaptors and TVs I have. I dont know which combos of reset+plug+unplug I have tried for this 6 months.
Click to expand...
Click to collapse
OK. Then, you have tried a lot of things. But, can you send a video of the TV image and the pilot of the chromecast?. What type of TVs you tried? You can also try to use a friend's TV.
Also, I suggest you to force a OTA update:
http://forum.xda-developers.com/showthread.php?t=3026442
If none of these things work, you should contact Google in their forums or to the warranty. But not sending feedback on the app, because that is only for feedback. i don't know for sure what you need to do for send your device. I can't help you on that [emoji20] .
But try the reset combination. Send a video if you can showing what's on TV, pilot, the process you follow to restart, and how you force OTA.
Also, you should try to unplug it, wait a bit, plug again to HDMI and press the restart button BEFORE plug USB.
Different combinations can help. Also, if you can, send in the video the last method above.
More things:
- Try without HDMI connected
- In any moment it get blank pilot?
- Your mobile recognise it?
- If doesn't work factory reset, make sure you're pressing the button in about 1 minute and very strong (for make sure youre pressing well). And tell me if the light state change on that time.
Thanks [emoji1] !

First of all, thanks a lot for options.
fer456 said:
OK. Then, you have tried a lot of things. But, can you send a video of the TV image and the pilot of the chromecast?. What type of TVs you tried? You can also try to use a friend's TV.
Click to expand...
Click to collapse
Samsung le40c550 and Toshiba 22L1353.
Also, I suggest you to force a OTA update:
http://forum.xda-developers.com/showthread.php?t=3026442
Click to expand...
Click to collapse
Thanks, that was something new and promissing. But no
If none of these things work, you should contact Google in their forums or to the warranty. But not sending feedback on the app, because that is only for feedback. i don't know for sure what you need to do for send your device. I can't help you on that [emoji20] .
Click to expand...
Click to collapse
As i wrote in OP - already contacted Google Support Forums. "Plug original adaptor, make factory reset" and so on.
Worst thing is - I cannot make replacement, though It was bought in another country.
But try the reset combination. Send a video if you can showing what's on TV, pilot, the process you follow to restart, and how you force OTA.
Click to expand...
Click to collapse
Made a short video of my efforts this evening.
https://www.dropbox.com/s/elql9jtkbnam20o/CC2.mp4?dl=0
Also, you should try to unplug it, wait a bit, plug again to HDMI and press the restart button BEFORE plug USB.
Different combinations can help. Also, if you can, send in the video the last method above.
Click to expand...
Click to collapse
Didn`t manage to make a video, too hard to do it alone
But, If I press button BEFORE plugging USB - there is no reaction at all. Held it for 2 full cycles.
- Try without HDMI connected
Click to expand...
Click to collapse
Tried. No effect. White LED (downloading, applying), Red LED - reboot.
- In any moment it get blank pilot?
Click to expand...
Click to collapse
Generally - no.
Got it for 5-10 seconds by sending reboot commands via CURL from linux console, but after a few secs it goes to reboot again.
Another option to see it for 5-10 secs - is to change language for example. But only for secs.
- Your mobile recognise it?
Click to expand...
Click to collapse
After boot, and at about 30% it can be recognized by mobile app, i can go to Devices, change any settings, view firmware version, reboot and FDR.
- If doesn't work factory reset, make sure you're pressing the button in about 1 minute and very strong (for make sure youre pressing well). And tell me if the light state change on that time.
Click to expand...
Click to collapse
You can see on the video, that button works. 1. Press the button 2. wait for blink on TV 3. LED blinks from white to red, then white again.

k3nny2k said:
First of all, thanks a lot for options.
Samsung le40c550 and Toshiba 22L1353.
Thanks, that was something new and promissing. But no
As i wrote in OP - already contacted Google Support Forums. "Plug original adaptor, make factory reset" and so on.
Worst thing is - I cannot make replacement, though It was bought in another country.
Made a short video of my efforts this evening.
https://www.dropbox.com/s/elql9jtkbnam20o/CC2.mp4?dl=0
Didn`t manage to make a video, too hard to do it alone
But, If I press button BEFORE plugging USB - there is no reaction at all. Held it for 2 full cycles.
Tried. No effect. White LED (downloading, applying), Red LED - reboot.
Generally - no.
Got it for 5-10 seconds by sending reboot commands via CURL from linux console, but after a few secs it goes to reboot again.
Another option to see it for 5-10 secs - is to change language for example. But only for secs.
After boot, and at about 30% it can be recognized by mobile app, i can go to Devices, change any settings, view firmware version, reboot and FDR.
You can see on the video, that button works. 1. Press the button 2. wait for blink on TV 3. LED blinks from white to red, then white again.
Click to expand...
Click to collapse
Thanks for the video
Really strange. Also seems that doesn´t do a factory reset as normal.
Sorry but i don´t have idea what to do. The only thing I can say is to interrupt the OTA by unplugging the chromecast and try to plug again and before turn on the light, use the reset button. But i don´t have more possible solutions.
I can provide you a support link from Google in Spanish (my languague). I will translate you all the important info but if you want, you can use a translator or ask me.
The phone number to request support. Change Spain to your country: https://support.google.com/googleplay/answer/6179357?rd=2
Google says:
- We can only replace your chromecast with a device that can be sold and used on the same country that you bought the original.
You said it before. But I suggest you to try to get a chromecast and receive it on your house using a transport business like UPS or going to that country, if it isn´t too far. Also, you can try to call to your local Google´s support phone to ask all I said above (the possibility to send it to that country and receive it with UPS) and also ask for a repair on your country if that isnt possible in any way.
Also i suggest you to open a new thread (to see if they look more on you ) with all the details like you do here and attach the video . All of that to give the support forums an idea and they wont say you that is your fault!!!!! :good: Is THEIR fault!. And see if they can give and advice to Google and fix it on a OTA update or help you too to return your Chromecast! Everything is possible...
Also take that survey after publish the thread related to setup problems. And when they ask you for comments or more problems, tell a bit resumed everything and attach the link of the thread you published.
https://docs.google.com/forms/d/1zmdQtKU41r7KB6Ys9sKSJnPbnw1lg8QE0M5t6gRow4g/viewform
Really really good luck from me!:good:
Tell us the results!!!

Yep, factory reset doesn`t work. CC always remembers his name and WiFi credentials.
You said it before. But I suggest you to try to get a chromecast and receive it on your house using a transport business like UPS or going to that country, if it isn´t too far. Also, you can try to call to your local Google´s support phone to ask all I said above (the possibility to send it to that country and receive it with UPS) and also ask for a repair on your country if that isnt possible in any way.
Click to expand...
Click to collapse
Not too far. I`m in Russia, bought from USA
And i dont have any document, that confirms purchasing, except manual. I bought it from a man in Russia, who purchased a bunch of CC in USA and resell in RU to get some profit.
In that time CC was unavailable for purchasing in RU, so the options where either to buy from local private resellers, order it on ebay or in google store through third-party, bacause google doesn`t ship goods to RU.
>>"Proof of purchase is required.
>>If you purchased your Chromecast from someone other than a Google-authorised retailer, your purchase is not covered by our warranty. Please review our Warranty policy here."
Also i suggest you to open a new thread (to see if they look more on you ) with all the details like you do here and attach the video . All of that to give the support forums an idea and they wont say you that is your fault!!!!! :good: Is THEIR fault!. And see if they can give and advice to Google and fix it on a OTA update or help you too to return your Chromecast! Everything is possible...
Click to expand...
Click to collapse
I`m not alone with the issue:
https://productforums.google.com/forum/#!searchin/chromecast/update$20loop
And the answer is one: plug out, power off router, plug usb, make fdr, plug hdmi and so on. Useless.
Thanks for trying to help.
My teensy is almost there.
Will try to get root and Eureka. Hope it works.

k3nny2k said:
Yep, factory reset doesn`t work. CC always remembers his name and WiFi credentials.
Not too far. I`m in Russia, bought from USA
And i dont have any document, that confirms purchasing, except manual. I bought it from a man in Russia, who purchased a bunch of CC in USA and resell in RU to get some profit.
In that time CC was unavailable for purchasing in RU, so the options where either to buy from local private resellers, order it on ebay or in google store through third-party, bacause google doesn`t ship goods to RU.
>>"Proof of purchase is required.
>>If you purchased your Chromecast from someone other than a Google-authorised retailer, your purchase is not covered by our warranty. Please review our Warranty policy here."
I`m not alone with the issue:
https://productforums.google.com/forum/#!searchin/chromecast/update$20loop
And the answer is one: plug out, power off router, plug usb, make fdr, plug hdmi and so on. Useless.
Thanks for trying to help.
My teensy is almost there.
Will try to get root and Eureka. Hope it works.
Click to expand...
Click to collapse
And you can't contact to this person?
Yes I see the forum post. But I said open a new one with all the info you provided me here to see if with all the info they can help you more. Because you provide very short description of the problems of the forum. So it's recommended to open new thread to give attention to the support instead using an older one. I hope that you understand me now.
I also read that sentence that google says. But I thought at first time you bought it on a store instead of second hand (or first hand but sold by other person). I suggest you to contact to that person if you can, because that seems that he give you a bugged device.
If the forums or the person you bought it doesn't do anything for you, I suggest you to buy a new one.
Is only 35€.

Finaly Google closed thread with awesome comment "The original issue that was reported here has been fixed; if you're continuing to have this issue, please start a new thread"
Okay, here we go again - https://productforums.google.com/fo...ting-from-a-supported-app/android/WBhIaPlN8Uc

https://support.google.com/store/answer/6178715?hl=en&rd=1#contact=1&ts=462610Try this. Is the same but emailing. Copy all content to the email.