Hi guys! So I downloaded the SGSIII mini toolkit and got stuck on the very first step! The USB Drivers won't install and all I get is this message:
"the MSS installwizard could not install SAMSUNG USB driver for Mobile phones V1.5.16.0"
I've tried to look and search for previous drivers and all KIES related has been removed ages ago, so what options do I have?
Thanks in advance!
____________________________________________________________
Okay, got them installed using PDAnet. You can lock this thread.
Related
Please don't unnecessarily kill any more chickens.
Have you tried Android SDK usb drivers? Someone else on the forum said it works.
Thank you for the reply. But it didn't work. Said can't find "USB Gadget"
hi
i had same problem,i installed samsung pc studio package and managed to flash with odin without any problem
following tutorial in the sdk kit, I got "adp" to recognice my phone from a command prompt in USB debug mode. But when I connect in downloading mode, I get this "Gadget Serial" driver issue. Gadget Serial is not one of the drivers in any of the USB driver packages I downloaded. Anyone know where I can get this?
any answers?
i got the same issue and my phone stuck on the samsung screen restarting over and over
I have posted latest x64 drivers from samsung here on this forum. You can try to use them.
Sent from my GT-I9000 using XDA App
Also restart windows with enforce driver signing disabled. Try other usb ports.
Sent from my GT-I9000 using XDA App
Please please can someone help i was using the new 4.01 ics on samsung galaxy s. Now i cannot conect to pc. I Get an error message all the time saying Usb malfunctioned and i cant use odin to revert back or anything. I have looked everywhere tried reinstalling drivers ect but no joy
I know a while has gone by but just in case someone else stumbles on this thread with the same problem or in case you're still looking for an answer try dialing *#7284# which takes you to the PhoneUtil. Under USB section click on MODEM and then click on USB. Give it a try, it should work
there is a direct download for the nexus drivers found here : http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/ , also suggested in another similar post is to clean the usb port of your phone with alcohol and a fine brush(but remove battery if doing so)
hello i found this forum great for mod my samsung galaxy s here i found a lot of thinks.
but here is my problem i have already install the samsung kies and android sdk, but when i trie to update my phone with kies the process run normally until it come the time that kies put the phone in download mode, there i receive a messege on the windows task bar like i have disconnected the phone and then it says that "error unknow device" and the upgrade on kies cant go on.
any help plz thanks
i have a att galaxy s rooted
windows 7 32bit
latest version of kies
First thing to try is test each of the different usb ports on your computer - if you get the same error on each port then my first instinct would be to reinstall the samsung drivers for your computer.
If you try reinstalling the drivers below is a link to the drivers that have worked the best for me.
http://www.mediafire.com/?0b45zo7o75rc5d5 - samsung captivate windows 32 bit drivers
thanks for your replay. i already have uninstall the drivers and reinstall them with no success, but i will try to test it in other usb port and report later
this is soo bad i have try both of you recomendations and still says usb device not recognize. then it says no driver was install and when i click that it says on the driver part that windows have stop the device for a error code 43.
i have search a lot and i havent find anything close to my problem can anyone else give recomendations on this or tell me if you know something similar to this happend to other users.
ps - i also try on a win xp 32 with the same result
Happy new year all,
I have a 8.9 wifi only 32gb amazon.com version 7310.
I can’t get it to connect to my windows PCs (multiple PCs) ANYMORE…I have the drivers installed, but when I plug it in, windows will ask me for the driver and when it tries to install it I get an error (device not installed properly).
Some history:
I have the usb driver (“GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe”) installed from the thread: “[GUIDE]Root, Bootloader Mode, ODIN, Recoveries & NANDROID Backup [7300/7310]”
Fresh off the box I hooked the tab up to my windows XP PC using the above driver and my PC recognized it. Also ODIN connected too.
I installed CWM (“Overcome_CWM_Recovery_v5.1.2.6_P73xx.zip”) from the above thread and rooted the tab using the root file (“Root.zip”) also from the above thread.
After that I couldn’t get the tab to be recognized from my PCs. But ODIN still works.
BTW, I’ve also tried Samsung Kies but it did not work (couldn’t connect to the tab).
I did a hard reset but I still have the same problem!!!
I need to be able to move files from my PC to the tablet as fast as possible. Wifi works but it is slower than usb 2.0!!!
Any help?
Thank you,
Have you tried uninstalling the drivers, restarting, then installing again? Sometimes Windows is a bit iffy. Also, the drivers from Kies are kinda different and tend to conflict (happened to me once). Another tip I'll give you: certain ROMs tend to hate having USB Debugging set to ON at Settings > Applications > Development. They just won't connect through USB while having that set to ON. I found this behavior on Android 3.1 ROMs, haven't had it in the KJ5 firmware and it's been almost two months with it. Best of lucks solving this!
issue solved by re installing the kies
Thank you for your suggestion.
Re installing kies and the latest kies update solved the issue.
my galaxy tab p1000 not recognized in download mode when im using odin...
can anybody help me iwant to reflash my tab...
Did you try to flash it anyway? Just keep trying. Good idea to be fully charged too.
Sent from my GT-P1000 using XDA
boss ill try it a couple times but cant read my device i want to reflash my tab is bricked....uhuhuh
many has done it.
As long as you can go to download mode, you are not bricked.
remember to have it charged for at least 4hrs.
Just connect it to Odin preferably at the same USB port as the one you used before.
Reboot it to download mode while data cable is connected, then try Odin.
Connecting in Download Mode
I had the same problem when i changed laptop. So on my new machine, the PC would not recognize my P1000 in the download mode. I was running win xp.
The problem was that it wasn't able to automatically locate the drivers. No wonder it wasn't. The drivers aren't built in to xp driver cache. So here is what you need to do:
Download Samsun Kies from samsung website. Do a search on google and you'll get to it.
Once downloaded, install Samsung Kies. No need to run it or anything. Once downloaded, plug that tab in download mode to USB of PC, and it will get detected and the drivers will get installed.
I still have KIES installed, but i never used it, i just installed it for the drivers.
Let me know if this helped.
Samsung Galaxy Tab Driver
obahmood said:
I had the same problem when i changed laptop. So on my new machine, the PC would not recognize my P1000 in the download mode. I was running win xp.
The problem was that it wasn't able to automatically locate the drivers. No wonder it wasn't. The drivers aren't built in to xp driver cache. So here is what you need to do:
Download Samsun Kies from samsung website. Do a search on google and you'll get to it.
Once downloaded, install Samsung Kies. No need to run it or anything. Once downloaded, plug that tab in download mode to USB of PC, and it will get detected and the drivers will get installed.
I still have KIES installed, but i never used it, i just installed it for the drivers.
Let me know if this helped.
Click to expand...
Click to collapse
Hi Dude,
Instead of installing Kies on your XP or windonws 7 for only driver, you can install driver using below guide.
Go to Google and search as Galaxy Tab Driver and go...Click Modaco Website & then Download.
Regards,
Venkat
Overcome's GB-stock-safe-v5 zip package contains USB drivers too, both 32bit and 64bit.
But the best is of course in linux, just a single line of definition in udev.
same here - SOLVED
I had the same problem (not recognized).. What I did to resolve the problem by:
1. Re-install Samsung USB drivers (got from here --> http://forum.xda-developers.com/showthread.php?t=1881981)
2. Set the tab in DL mode and connect to the PC... wait for windows to install drivers.... DONE!
3. Startd Odin_v1.83.. CONNECTED!!! (seen by yellow COM#)
Hope this helps.. HIT THANKS PLS!
Hi everyone. I have a SGS I9000 with the eclair version of the androir and i want to update it, but here´s the problem... I downloaded the soft samsung kies and connect the smartphone to the pc and when it was installing the drivers, the mtp didn't install.
I'm on windows vista x86, but i also tried on a clean windows 7 x64, here without the samsung kies installed, and the mtp can´t install, again.
I´ve downloaded the drivers SAMSUNG USB Drivers for Mobile Phones (x86 & x64) to update manually through the device manager but it says that is up to date and... nothing! Can't connect the phone to the Samsung Kies.
Any ideias?
Thanks
Question solved. Can someone close this topic?? Thanks
Sent from my U9200 using xda app-developers app