Can anyone please tell me safe and easy rooting guide as I am new to android.
Hi, im trying to root my s3 mini wtih the tutorial you have here and it's not working i have a I8190L, and Im getting this mesagge when i try to flash
the rooted rom:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXALK6_I8190XEFALK1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> hidden.img
<ID:0/017> modem.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
my region is TEC (i got that from kies) and the version is LK1
please help me :crying:
Related
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
Have you tried flashing stock rom of the Chinese version of the Note GT-19220?
Since you have the chine i9220 then make sure you get the specific roms for the chinese version. If you try flashing the N7000 roms you may get this error or may brick it so just be careful.
Sliderse said:
Hi All,
I have a Chinese version of the Note GT-19220, It has ICS on it but is missing Google Play so have tried to flash a new western version of ICS using Odin PC
I have followed the instructions exactly as described and I get a fail almost at the end of the process.
Now I get a picture of a phone and a yellow triangle and a monitor and below it is says Software Update failed.
The message I see in Odin is:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLQ3_N7000XXLPT_N7000NEELP4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know how I can fix this? I have tried with several roms with the same result.
Do I need to take it to Samsung now to be fixed?
Click to expand...
Click to collapse
You flashed N7000XXLQ3_N7000XXLPT_N7000NEELP4
It was N7000's rom and i feel its not compatible for i9220
You can flashed lidroid rom, both i9220 and n7000 can be flashed, I tried it and it works
Sent from my GT-N7000 using xda premium
OK here we go, I'm no idiot, I've been flashing phones etc for a good couple of years, consider myself excellent as a computer user, was a repair technician.
With that out the way;
I downloaded a 4.2 BETA for my Galaxy s3 mini, used Odin to try and flash it and received "<ID:0/008> Complete(Write) operation failed." first time, no other errors.
Phone has usb debugging enabled.
Do I tried again, same thing. Then tried once more, and received;
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
Now as far as I know, one should only get this error when a re-partition has gone wrong. I did NOT check the re-partition option.
So having a read around, I saw someone had posted a .pit file for my phone, so went to use this, and now this is my error;
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Could anyone help at all?
MY log, as far back as it shows;
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008>
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007>
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008>
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Oh and trying to start the phone normally, mostly just hangs at the Samsung logo, though when trying a hard reset, it would hang at a spinning "wheel", which in itself was stuck.
Many thanks
OK, update, flashed stock FW back, worked fine, now phone is just stuck at the Samsung logo. Can't get into recovery. The hell is going on?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190NXXAMB1_I8190NEVRAMB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
<ID:0/009> modem.bin
<ID:0/009> STE_boot1.img
<ID:0/009> STE_boot2.img
<ID:0/009> system.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
hevydani said:
OK, update, flashed stock FW back, worked fine, now phone is just stuck at the Samsung logo. The hell is going on?
Click to expand...
Click to collapse
Boot into stock recovery and wipe data, note that you will lose all your files (are your files on internal storage or extsdcard, if the latter you should be safe.
Sent from my SGH-I747 using Tapatalk 2
rani9990 said:
Boot into stock recovery and wipe data, note that you will lose all your files (are your files on internal storage or extsdcard, if the latter you should be safe.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I can't even get into recovery mode.
Thanks for the reply
hevydani said:
I can't even get into recovery mode.
Thanks for the reply
Click to expand...
Click to collapse
Try this PARAM or I8190N PIT file I presume you're phone is NFC version. Find them here:
http://forum.xda-developers.com/showthread.php?t=2159660 use the PARAM as PDA in Odin first.
Sent from my GT-I8190 using Tapatalk 2
kicker63 said:
Try this PARAM or I8190N PIT file I presume you're phone is NFC version. Find them here:
http://forum.xda-developers.com/showthread.php?t=2159660 use the PARAM as PDA in Odin first.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Jesus christ you just saved my ass!
I literally love you, thanks so much.
Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise
what Rom are you on?
nixon.itai said:
Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise
Click to expand...
Click to collapse
What rom are u using ? resurection - carbon - aopk - aosp ? or even stock? ... android 4.2.2 , 4.4.2 etc.... ?
nixon.itai said:
Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise
Click to expand...
Click to collapse
Recovery does not care about the crappy PIT partition as it does not care about which ROM you're in!!!!
Try to close kies from the task manager,
if not helped simply turn off your WiFi or apply flight mode!
SIMPLE!!!
Jhon998 said:
Recovery does not care about the crappy PIT partition as it does not care about which ROM you're in!!!!
Try to close kies from the task manager,
if not helped simply turn off your WiFi or apply flight mode!
SIMPLE!!!
Click to expand...
Click to collapse
i have the same problem
You can flash CWM from http://forum.xda-developers.com/showthread.php?t=2752469 and flash http://download.chainfire.eu/446/SuperSU from recovery .. you shoud then have root
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
enolaN_Fr said:
Hi everybody,
I'm needed some help, I bought T715 and it was delivered with XEZ firmware and I have the idea to flash it with XEF firmware (to have everything ok with my french carrier).
I remember that on my old samy device I'd never expect troubles to flash ROM with different CSC.
Maybe that thing change...
After using Odin 3.10.7 (6 too) it's fail (I download official firmware on sammobile):
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T715XXU2AOJ4_T715XEF2AOJ1_T715XXU2AOJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin engine v(ID:3.1005)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> boot.img
<ID:0/014> NAND Write Start!!
<ID:0/014> cache.img
<ID:0/014> hidden.img
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
<ID:0/014> Added!!
This soft brick my device everytime I try too reboot, so to make it revival, I flash manually Hidden.img, after changing it in Hidden.img.tar.
Maybe someone have a explanation!
Thanks for your answers
Click to expand...
Click to collapse
You don't need to flash hidden.img.
Remove it from the firmware then flash again.
Well done, thanks for your help!
odin versions tizen update error. please help me
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCPK1_V700OXACPK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008> modules.img
h ttp://i.hizliresim.com/AznPLq.jpg