I have a small problem .. my windows phone is, I believe halfbroken .. there is there a way to solve this problem? I would like to install a new rom.
go to the booloader screen, half bricked devices have a lot of text but doesn't say USB or Serial in the white bar... normally this comes with TMobile devices and bootloader 5.12
the fix for this is Y-Cable method, use the search because your question it's already solved...
Related
Hello,
Firstly I want excuse that I open new threat and open it here, but please let me explain it why I do it.
I have O2 Stellar, with SPL:1.82.0000 and my USB dont work, and USB connector is OK and cable or USB port too. I try it at diferent PCs with diferent systems aka XP, Vista.
Main problem is that USB dont sync with ActiveSync or other, no "Tada sound" dont show "not recognize" really nothing action when I plug it to USB.
And charging is work only when PDA is off and light RED LIGHT but when is off, than no action, no light, no charging.
I know that this is threat for "Kaiser General" but I can live with charging only when is off, but I cant live withou coocked ROMs, I really try use all HardSPL new Radios, NBH from shippedroms copy to SDcard (Formatted to FAT32) and it only show "LOADING..." but nothing, more, still Loading.
I was tryed JumpSPL but it dont flash from SDcard, and USB is not showing and not working, that I cant use MTTY.
Please let this threat open, I really need HELP
Do someone know if this is Hardware or Sofware problem?
I cant send it to service, from my country is too expensive (like new phone)
Thank you in advance
Jozef Ziak
Edit: The handsfree is working perfect, I really dont know what is it.
i have the same problem i been through three phones already 1 that i used roms on and two brand new ones from warranty att said it's a hardware issue".they are sending me another phone.
I had almost a similar problem with my tilt at one point. Check your usb to pc settings and make sure you have "advance connection" (or something similar I can't remember exactly what it says) checked. On the rom I am using now shows something different there. I says "enable faster data sync" "uncheck if activesync doesn't recognize the device"
Thank you, but nothing reconize my PDA, no sound after plug, nothing when I go manualy to Bootloader, only show serial, not USB
same problem
Hi,
I had the same problem. I tried everything but nothing helped. I had 2 more months of warranty so they changed the main panel. After I got it back from the service it was working for 3 weeks long and now again died with the same issue.
Strange. I have to send it back to the service.
HI there , I had the same problem for about 4 month but i solved it >>> how ?
Just clean your htc USB port and check if it is broken or not and you will see that your issue will be solved brother
hi all, i think my trinity is dead, when i connect htc to pc it syncs ok, but when htc connects normaly it ask for configure screen Alignment and dont pass that screen it ask over and over again to config. touch screen positions, when i try to flash with other rom it says ''not conected'' but actualy it is connected and sync with WINDOWS MOBILE, is any way that i can clear all firmwares ou make the htc back with factory settings?i think is the only thing that might work, im stuck with the updating and touch screen position problems...the touch screen problem i think is more hard to solve, is that any way to pass that screen configuration menu and run windows mobile normaly? probably i will be able to flash more easily inside the windows mobile...
heres a video to see the problem http://www.youtube.com/watch?v=TiHXEOPHPq8
i appreciate all your help...and sorry for my bad english
Hey guys, I have a problem here,
After installing Leng Arabic on my HTC Diamond phone the phone reset itself, I got a message saying Caching arabic then the phone reset itself again all the way to show me the HTC Logo followed by a black screen that only shows the signal power, unfortunalty i have a key lock on my phone so i am unable to connect it to the PC using activesync and I get the following message " You have failed to unlock your device. To connect or synchronize with this PC, please disconnect your device and try again." as The screen is just black I am unable to unlock the phone.
Can you please advise if there is any way to get access the contacts before doing a hard reset? I managed to access the bootlaoder screen using the volume down and the rest button and I get HTC USB sync in my device manager but i am unable to get anywhere inside the phone from there?
Many thanks in advace
I take it you cannot connect to activesynch from the bootloader? I dont really know what you mean by 'keylock', but ive messed up a few htc phones bit as long as i can get to the bootlader ive been fine. I think sprite allows you to make a backup from windows as well as your phone. Maybe try running that from the bootloader. I dont have my phone with me (!!!!) but i think i have sprite 6.5.4
A 'demo' wink wink is easily found on the net.
Hi,
I want to buy HTC HD7, but the phone has a problem, when turn it on, the phone enter into bootloader and the computer does not recognize it through USB. How to fix it?
p.s. sorry for my bed english
Use DFT_RSPL_WP7FG1_LAUNCH
and try another SPL Version. For 3 Hours i had the same problem and this has help me
i believe that is a full brick.
rumor has it, jtag fixes that.
google hd7 jtag.
sh4d0w86.
I know this is not Mozart forum (not able to get any help there) but I do have a HD7 which I ve successfully downdgraded with the Y cable. My problem now is that i ve a bricked Mozart, which when I initially use the Y cable I was having the "serial and usb" showing when i enter bootloader but after many attempts in the "usb host mode" (vol down+camera+power) "serial and usb" disappeared. Now i am able to get as far as "loading and then it is stuck in "checking". I ve been using a lot of different card readers and different sizes usb and sdcards from 1 to 16gig, when i use usb flash drive it goes into loops (off, on, tricolor and usb download host mode). I ve been trying for 3 weeks now even send to HTC service but they wanted to change the main board and charge me US$200+(madness, rather throw it away).
So, just wanted to know if anyone has encountered this problem with HD7 and manage to overcome it otherwise I will give it away for others to salvage the parts as mine is in very good condition. Hope to get some help and Thanks in advance.
I ve search but no one seems to be having the same problem as mine. I ve also tested the Y cable, card reader and sdcard they are fine as the phone detects it. If i don't put an image in it tells me so or if I put in something else it says "not allow"
http://forum.xda-developers.com/showthread.php?t=1597837
if this method doesn't work anymore, then you must pay for the Riff Box service to flash a new bootloader and rom, it doesn't cost over $100, I'm not sure how much maybe between $15 - $50, just look for someone who fix cellphones and has a Riff Box.
Regards.