Hello,
I broke the screen on my tilt and was told I can still access the phone using My Mobiler and Pocket PC Controller etc. But here is the thing, I dont already have the software installed on my tilt and the software says it will install the software onto the phone... but i ant follow the prompts if I cant see my screen. Correct?
Is there anyway to go about this? All i really want to do is check my text messages.
Thanks
neeeevermind. MyMobiler allows you to connact without screen confirmations! and its FREE
Hey everyone I have just CID-Unlocked my phone with HardSPL 3.56.
I am about to flash Laurentius26 KDV10 but I don't know what mode my phone has to be in when I run KaiserCustomRUU.exe.
I know my phone must be connected, should the sync icon be green?
Should the Allow USB Connections box be ticked in the ActiveSync Options?
Should I be in bootloader?
Should I just be in the normal windows 6.1 today screen when I run KaiserCustomRUU.exe (The screen says the sim card is missing etc etc with a numpad)?
aaaand finally last one, should I hard-reset the phone before running KaiserCustomRUU.exe?
thanks a lot
Ok. Here's your freebie. But Check out the Top links in my Signature, Very Useful.
ActiveSync Must Be Green.
HardSPL MUST be installed.
Yes you want USB connections.
Bootloader, Doesn't matter.
Normal Today Screen, That's how I do it, but you CAN be in bootloader, but Most people start on the Normal Today Screen.
Is your SIM in?
Lastly, No, Don't Hard Reset until AFTER you Flash and are at the "tap here to set up your device" screen
hi all, i think my trinity is dead, when i connect htc to pc it syncs ok, but when htc connects normaly it ask for configure screen Alignment and dont pass that screen it ask over and over again to config. touch screen positions, when i try to flash with other rom it says ''not conected'' but actualy it is connected and sync with WINDOWS MOBILE, is any way that i can clear all firmwares ou make the htc back with factory settings?i think is the only thing that might work, im stuck with the updating and touch screen position problems...the touch screen problem i think is more hard to solve, is that any way to pass that screen configuration menu and run windows mobile normaly? probably i will be able to flash more easily inside the windows mobile...
heres a video to see the problem http://www.youtube.com/watch?v=TiHXEOPHPq8
i appreciate all your help...and sorry for my bad english
i am having a problem. I dropped my HTC Diamond and cracked the screen. the screen is no usable at all. The buttons at the bottom work but nothing on the screen works. Now, i need to get the contacts off of the phone, as i have bought a the new HTC Hero Android. But, the problem is when i goto sycn the broken phone to my comp. i can only get it to go into windows explorer. It won't create an Activsync connection. Reason being is when the diamond worked i remeber having to touch the screen to choose between 2 connection options (activsync or disc drive) now i can't do that.(broken touch screen) is there any way to get the contacts off of it? I have a link to a forum i was on, that i can send in a private message. if someone could help me would be awesome. thanks
odds are the touch works even if the screen doesnt.
you may also be able to select with the direction pad.
ACTIVESYNC Reply
Just ActiveSync real quick, an you'll be good to go.
You should be able to ActiveSync just like before. On mine, if it was the last means of USB connection, ActiveSync will fire right up when you plug in. If the last item picked before the screen went bad was "USB Drive", just use the down arrow key to get back to what would've been "Activesync" mode.
Good Luck.
- 2 Bunny
Hi folks
this is the first time for me with WP 7 i am with the Android since the G1 lol.
i got an a focus s from a friend and i said to my self , why you don't try it? its locked to at&t, so the first thing i have to do is unlocking it.
at that point the problems started!!, i checked the unlocking cost via code, the average is 30$ which is expensive for 80$ phone!!, so i choose to unlock it via fastgsm and unlocking via USB cable.
i followed the instructions and everything seems to be OK till the last step when the phone reboots to the download mode, the program shows "FAILED" i had contacted teh customer support for fastgsm and they tried to help me, with o hope, thereafter i didscovered that there is somethign wrong with the connection of teh phone to the PC.
i start to read and read and read again "noting that i am expert in android things" and finally i decieded to use the CAb sender and/or the "sharp7eighter' to update then SIM unlock.
both programs with the same error "Device handshake failed" noting that the phone is connected and shows i937 in my compute but it never ever recognized by Zune, always says "no device connected"
sorry for my bad English, but i am very sure there is something i can do to :
1-go back to stock
2-update my phone
just to connected the fastgsm program to be able to SIM unlock it at acceptabl;e price 15$.
please and thanks
abudraih said:
Hi folks
this is the first time for me with WP 7 i am with the Android since the G1 lol.
i got an a focus s from a friend and i said to my self , why you don't try it? its locked to at&t, so the first thing i have to do is unlocking it.
at that point the problems started!!, i checked the unlocking cost via code, the average is 30$ which is expensive for 80$ phone!!, so i choose to unlock it via fastgsm and unlocking via USB cable.
i followed the instructions and everything seems to be OK till the last step when the phone reboots to the download mode, the program shows "FAILED" i had contacted teh customer support for fastgsm and they tried to help me, with o hope, thereafter i didscovered that there is somethign wrong with the connection of teh phone to the PC.
i start to read and read and read again "noting that i am expert in android things" and finally i decieded to use the CAb sender and/or the "sharp7eighter' to update then SIM unlock.
both programs with the same error "Device handshake failed" noting that the phone is connected and shows i937 in my compute but it never ever recognized by Zune, always says "no device connected"
sorry for my bad English, but i am very sure there is something i can do to :
1-go back to stock
2-update my phone
just to connected the fastgsm program to be able to SIM unlock it at acceptabl;e price 15$.
please and thanks
Click to expand...
Click to collapse
Fastgsm stopped working with the focus s when the newer firmware got updated, I think it was version LE2, I know I had to pay for more expensive unlock although in theory we can achieve unlock without paying anything with gsmtools etc, but this is risky as I don't really know how, it would require some experimental work!
As for connection issues
On keypad of your phone type ##634# and click "Call" button to show Diagnosis screen.
Type *#7284# onto Diagnosis screen, select "Modem, USB Diag." For fastgsm, and "zune" for...well, zune and confirm selection
Restart and let me know how zune sync now works
Sent from my arc 10HD using xda app-developers app
dazza9075 said:
Fastgsm stopped working with the focus s when the newer firmware got updated, I think it was version LE2, I know I had to pay for more expensive unlock although in theory we can achieve unlock without paying anything with gsmtools etc, but this is risky as I don't really know how, it would require some experimental work!
so, the safest way is pay the 30$, correct? noting that the firmware is in the attached pic
As for connection issues
On keypad of your phone type ##634# and click "Call" button to show Diagnosis screen.
Type *#7284# onto Diagnosis screen, select "Modem, USB Diag." For fastgsm, and "zune" for...well, zune and confirm selection.
i know, and i am already on the "Zune, USB Diag." option.
Restart and let me know how zune sync now works.
the zone still not recognize the phone (pic attached)
Sent from my arc 10HD using xda app-developers app
Click to expand...
Click to collapse
please see me comments above
here the Zune is not connected , noting the the PC is recognize the phone
abudraih said:
please see me comments above
Click to expand...
Click to collapse
Its zune, Not zune diag, select the top option and reboot, it should work then
Incidently its modem diag for fastgsm and not zune diag, as far as I could tell zune diag doesn't work with either!
still not working
abudraih said:
still not working
Click to expand...
Click to collapse
OK, there are a bunch of things we are going to try
Firstly are you in a position to hard reset your device from the boot loader?
If so do it, If not turn it off instead
turn your PC off
Plug USB cable in to a different port on the back of your PC, do not use a hub, it has been known that some hubs can affect sync
Turn both pc and phone on, assuming you have used a different USB port windows will install new drivers
Load zune and try again
Sent from my arc 10HD using xda app-developers app
i didn't use the phone yet, so i have no data to lose.
for the hardrest i did it many times, from setting , about, reset your phone then turn it off, press the three buttons together (power+camera+vol down) and format.
i don't know what you mean by headrest via bootloader.
and i changed the USB port and used 3 different types of USB cables, with no hope
and the strange thing is, when i plug the phone, the zune starts automatically and shows no device connected !!!
i am very sure that the previous user for the phone manipulate wit the software, so all i am trying to do is revert to stock, and i have another question regarding the download mode, when i was using the USB method from fastgsm to SIM unlock (screenshot attached), it shows that the PC detect the phone and read all information, but when it restarts to the download mode, it "FAIL".
the screenshot attached
abudraih said:
the screenshot attached
Click to expand...
Click to collapse
any thoughts ???
abudraih said:
any thoughts ???
Click to expand...
Click to collapse
I think its connected as a MTP device, that probably explains it..
OK,
Im going to hazard a guess with drivers being the problem
with the device connected I want you to do in to device manager and uninstall the driver for it, make sure you click delete driver as well.
then Disconnect the device before it can start installing it again
then go to http://www.nirsoft.net/utils/usb_devices_view.html and download the program at the bottom, make sure you choose correctly between x86/x64
this little program will allow you to view and delete all USB devices connected past and present. basically select the device, right click and uninstall it, you will need to run the program as admin
Have a field day and delete anything and everything that might be related to the phone, if you whack something that isn't related all you will have to do is reconnect it and it will install the drivers again so there isn't much to worry about.
try that and see if that removes what I think is a driver conflict. mind it might not be obvious what is and isn't related so best err on the side of caution and keep only those that definitely are not it!
Note it might be Samsung, or i937 or Windows phone or WP7 or more annoyingly USB composite device of which you will have many, just mind one of these will be a keyboard and mouse, if it stops just unplug and plug back in, windows will take care of the rest