hi guys i just bought a captivate from a friend and when i open the keyboard...the keys u,j,n, full stop ... are not working is it a digitiser screen problem?? or a software one??
any solutions to the problem???
If the same keys are not working in portrait and landscape mode, than it is a keyboard (software) problem.
If the same spots of the screen do not register touch in any app, then it is the digitizer (hardware) problem.
do we have any custom keyboard in which that area can not be put to use???
That's not what he said.
Do those points on the screen (where the keys are that don't work), work on any other app? (ie go into the web browser, load up a random page, and try touching the areas that didn't work and see if you get a response. If not then it's the screen. If it does work then it's the keyboard. Swift 3 or w/e worked with my cappy, so you can try that if you want.
l2azoredge said:
hi guys i just bought a captivate from a friend and when i open the keyboard...the keys u,j,n, full stop ... are not working is it a digitiser screen problem?? or a software one??
any solutions to the problem???
Click to expand...
Click to collapse
saw that u own a xolo x1000... pls tell me how exactly u rooted the phone... we all have been running around to find a root solution and u say its rooted if so pls share...
If you want a root procedure, refer to the technique set forth by the XDA user Abhiraj4u.. It was a major breakthrough..
Sent from my Intel Xolo X1000 using the XDA Premium 4 App.
x0ne215 said:
That's not what he said.
Do those points on the screen (where the keys are that don't work), work on any other app? (ie go into the web browser, load up a random page, and try touching the areas that didn't work and see if you get a response. If not then it's the screen. If it does work then it's the keyboard. Swift 3 or w/e worked with my cappy, so you can try that if you want.
Click to expand...
Click to collapse
Any update on this? My phone started doing this and I'm not sure if it is from an upgrade or if something broke. Same deal; j n u don't work.
I'm running cyanogen 10.1.2 now and I enable the "show touches" on the developer screen. As I slide my finger from left to right, the vertical line stops moving and then two lines appear, and then it goes back to one line past the dead spot. Look like there is a region about 1 cm (1/2 in) that is a dead zone where the input doesn't work. It is dead from the top to the bottom of the screen.
This is on a captivate i897 that was upgraded from 2.3.5 gingerbread to cyanogen 10.1.2.
Any ideas?
mycomm said:
Any ideas?
Click to expand...
Click to collapse
Read post #2
Related
Hi everyone...
I've been having problems with my Galaxy S since yesterday. After upgrading to XXJPM my display is rotated 180 degrees (completely upside down). Strangely enough, the touch interface seems to be working just fine.
For example, the "Phone" icon is supposed to be on the bottom-left of the screen. It is now displayed on the top-right corner (again, upside down) but in order to activate it I still have to touch the bottom-left corner right on the icon's original position.
The display is also rotated 180 degrees if I enter recovery or download mode, but the volume up-down buttons still function as is. There are times when the display will appear normal for a few seconds before rotating itself 180 degrees again.
I followed the installation steps to the letter, did everything properly, I even searched just in case other users had similar issues, but I still haven't found a fix yet (really sorry if I missed similar threads). I also tried calibrating the g-sensor, but that didn't solve the problem.
Auto-rotate works perfectly, but the screen is still upside down no matter which way I rotate the handset. The same goes for when auto-rotate is off.
Any thought will be highly appreciated. I'm also willing to make a small donation if necessary. I'm desperate for a solution
Odd. Try flashing a new rom
Sent from my GT-I9000 using Tapatalk
ickyboo said:
Odd. Try flashing a new rom
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I did, but that didn't solve the problem. I think it has something to do with the bootloader since during startup the screen would show the normal Galaxy S logo correctly for about one second and then the display is rotated. Even the download/recovery interface is flipped.
The Good and the bad
Good news first: you are not the only one have this problem.
I have same problem after updated Nordic v. Froyo.
Bad one is I haven't got a clue how to sole the problem.
Let't belive ours has special talent which can jump twice more that ordinary ones.
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
wonbad said:
Good news first: you are not the only one have this problem.
I have same problem after updated Nordic v. Froyo.
Bad one is I haven't got a clue how to sole the problem.
Let't belive ours has special talent which can jump twice more that ordinary ones.
Click to expand...
Click to collapse
Sure hope so
lgkahn said:
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
Click to expand...
Click to collapse
I'll give it a try. Will search for a good rom with bootloader included after this
lgkahn said:
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
Click to expand...
Click to collapse
Tried this, didn't work too. I also tried Tayutama Edition rom, actually it helps a bit. After finishing the sdcard scanning routine the screen would work just fine for quite a while before going straight back to being rotated. It is also still upside down during the entire boot process.
Found another interesting discovery. Still using Tayutama firmware, if I switch the Power-Saving Mode from Display settings off and on, the display will be reverted back to normal.
I wonder what's causing this issue in the first place...
Tried another fresh rom, still no improvement...
I attached a picture showing how the screen is upside down even in download mode. Notice how the USB port and the download mode triangle just don't match.
Any further advice would be highly appreciated
Solved Mine!
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
wonbad said:
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
Click to expand...
Click to collapse
I'm afraid that doesn't work for me
I'm glad you fixed your Galaxy S though. Quick question: did you have the screen upside down during the Galaxy S logo animation on startup?
It seems diffren kind problem
I am sorry that my solution did not work for you.
Mine did work few hours after down load Froyo.
Then problem began.
Have you tried factory reset then calibration?
wonbad said:
I am sorry that my solution did not work for you.
Mine did work few hours after down load Froyo.
Then problem began.
Have you tried factory reset then calibration?
Click to expand...
Click to collapse
Yes, I tried that and it didn't work.
Still trying different solutions right now, hope I can get a good solution soon
I have another Galaxy S in hand. The broken one still has its screen upside down. I was wondering if I can backup the bootloader and ROM of this new Galaxy S with the system working correctly to the broken one. Will that be possible?
As always, inputs are welcomed
Thanks wonbad!
wonbad said:
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
Click to expand...
Click to collapse
Thanks! I had also problems with auto rotation, did even factory reset but did not start to work until made calibration you mentioned.
I've tried virtually anything to get the display fixed, including doing a complete rom backup of a healthy Galaxy S, and the display is still rotated. I think it really is a bootloader problem.
I took it to Samsung service center here in Bali. They said they can fix it, but they won't because I got the device in UK and I need to take it to a service center in the UK to get it fixed. Crazy...
A quick Note
==========
Just to make it clear, for any future reference, display rotation if shown when it is powered off and charging and also while booting, this is most probably a hardware issue, this can ONLy be achieved by replacing the LCD (or doing a hardware repair of the LCD) it has nothing to do with sensors or software.
Thanks.
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
I was flashing a rom
Left RomManager on my phone a bit longer than normal, because i had to do some errands.
The battery was near to dying but i flashed CM7 nightly anyway
The battery didnt die in the flashing process but said 5% at the first launch
I plugged it into the charger and configured it.
I was on the 3rd or so screen when i noticed something strange, i couldnt click on certian parts of the screen.
I had to open the keyboard and use the D-Pad to push the next button.
Once i was on the stock adw launcher when my phone started acting bizarre.
It would move things around and open apps by its self.
Curious to see the pattern involved, i managed to get DevTools open and opened the "Pointer Location" section. It looked like the pointers where stuck on the middle of my screen.
I locked my Phone then unlocked it and it stopped. I noticed i was completely unable to select any center part of the screen
doing so would result on selecting the closest available pixel
I gathered some data by miving my finger in a single motion back and forth from top to bottom and these where the results [see pics]
Does anyone know how to fix this
also, i tried flashing different roms with no luch
Ive got the same issue with the left 3rd of my screen! any ideas on this? did you get it fixed somehow?
Get your digitizer replaced from service center ... this happened with me ..people will suggest you heating your phone a little and other things .. but this problem will come back..
Sent from my Milestone using Tapatalk
kj_khaladu said:
Get your digitizer replaced from service center ... this happened with me ..people will suggest you heating your phone a little and other things .. but this problem will come back..
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Ok thanks - is this a Motorola Service Centre? if so any idea how i would go about getting in touch?
EDIT - in the UK call 0871 2000995.
i have bought and change my digitizer but it still have issues............it is only working in the middle ...........can someone help plz
perromatic said:
i have bought and change my digitizer but it still have issues............it is only working in the middle ...........can someone help plz
Click to expand...
Click to collapse
Try sbf back to stock, if it's still broken I'd try to get a new phone, I had a droid do this and the whole screen would only respond for the first minute when you turned it on, got it replaced for free because I was still under warranty
I notice that this happens quite often where after typing a certain number of words these 3 keys become unresponsive and does not work sometimes i need a long hard press to get it to work rather than just touch. Other keys are just fine.
It's [p] [backspace arrow] and [enter]
Im using the swype keyboard. Is it a swype issue? I have not managed to test it without the swype but my phone has been like this ever since I bought it. I am a heavy user and no1 i know who uses the note has this issue.
Is anyone able to clarify? Is it a screen problem cause i'll go claim my warranty since the service centre is right round the corner if this is the case.
Feedback much appreciated. Thanks
Could this be a screen hardware defect in my unit?
unSpoke-n said:
I notice that this happens quite often where after typing a certain number of words these 3 keys become unresponsive and does not work sometimes i need a long hard press to get it to work rather than just touch. Other keys are just fine.
It's [p] [backspace arrow] and [enter]
Im using the swype keyboard. Is it a swype issue? I have not managed to test it without the swype but my phone has been like this ever since I bought it. I am a heavy user and no1 i know who uses the note has this issue.
Is anyone able to clarify? Is it a screen problem cause i'll go claim my warranty since the service centre is right round the corner if this is the case.
Feedback much appreciated. Thanks
Click to expand...
Click to collapse
unSpoke-n said:
Could this be a screen hardware defect in my unit?
Click to expand...
Click to collapse
Nope.. If you are in old firmware update to LA4. there was some touch sensitive issues in old Firmwares. but those are fixed in LA4 or LA6.
Thanks but mine isnt rooted. im on Gingerbread 2.3.6. baseband version N7000DXKL2
Are there any known issues with this stock version? I did a full screen test *#0*# and no problems with every category.
Another issue i notice is my SMS's keep getting resent upon reboot and i've uninstalled SMS Popup not sure if it has been fixed will continue to monitor. As far as i have read via google search: there's no fix for this?
unSpoke-n said:
Thanks but mine isnt rooted. im on Gingerbread 2.3.6. baseband version N7000DXKL2
Are there any known issues with this stock version? I did a full screen test *#0*# and no problems with every category.
Another issue i notice is my SMS's keep getting resent upon reboot and i've uninstalled SMS Popup not sure if it has been fixed will continue to monitor. As far as i have read via google search: there's no fix for this?
Click to expand...
Click to collapse
There were few bugs are their in old ROMs so Samsung pushing all new LA4 & LA6 ROM to all regions. wait for it. and more over ICS coming to Note very soon. i guess all problems ll be solved.
The original mytouch 4g has the same issue unless you run stock software. Happened to me on 3 different phones, drove me nuts.
Sent from my Sensation using xda premium
Ah alright, that's much appreciated as it;s frustrating to make a typo and not be able to backspace to fix the spelling error lolz ~.~
Check your hand-set with the screen test.Dial *#0*# from dial pad. A screen will appear. select touch test and test your phone's screen. Do it when you are holding it in your hand and when your hand-set is kept on a hard surface. If there is sensitivity issue in any of the test get your handset replaced or change the kernel version to get rid of the issue.
outsyder said:
Check your hand-set with the screen test.Dial *#0*# from dial pad. A screen will appear. select touch test and test your phone's screen. Do it when you are holding it in your hand and when your hand-set is kept on a hard surface. If there is sensitivity issue in any of the test get your handset replaced or change the kernel version to get rid of the issue.
Click to expand...
Click to collapse
Oh god, another issue....
I thought its only me facing this problem rarely. But there are many others as well.
check out this http://forum.xda-developers.com/showthread.php?t=1500000&page=1
LA4 didnt solve d problem, hopefully ICS Will.....
Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code