[Q] Roms don't run after installation - LG Optimus 2x

Hi everyone. i apologize in advance if this topic has already been handled, but i didn't find any thread talking about my issue.
I explain my problem:i got an lg 2x and i'm running cm10 and it's actually pretty good imho. Yesterday eve i tried to install Miui 4.2, just to see how it was like. No problems during installation itself, but when i rebooted my phone, it stucked on the animation (the M with loading bar beneath) for hours (just saying). Then i tried with Django and Hd Nova: same thing. I did a full wipe (cache+dalvik) and i still don't get where my mistake is. Might you help me out please? Thank you all!

LouNatico said:
Hi everyone. i apologize in advance if this topic has already been handled, but i didn't find any thread talking about my issue.
I explain my problem:i got an lg 2x and i'm running cm10 and it's actually pretty good imho. Yesterday eve i tried to install Miui 4.2, just to see how it was like. No problems during installation itself, but when i rebooted my phone, it stucked on the animation (the M with loading bar beneath) for hours (just saying). Then i tried with Django and Hd Nova: same thing. I did a full wipe (cache+dalvik) and i still don't get where my mistake is. Might you help me out please? Thank you all!
Click to expand...
Click to collapse
It depends what cm10 version you are running
There are versions for old and new bootloader,if you are running on official cm10 then you are on old and you need to switch to new bootloader and then you can use new bootloader rom's,there are tutorials in general section how to do it :good:

Related

[Q] Changing to Cyanogenmod on the P990? Keeps failing

Hi guys
I am trying hard to flash my phone with the latest stable Cyanogenmod (7.1)
But I am facing some issues..
Here is what has happened so far:
I have tried a couple of times now, but every time it just hangs on the blue LG startup logo..
Please explain this to me, as if I know nothing at all. (I feel this way)
So here is a list, of how I think I should do:
1: Reflash with Nvflash, so the phone actually becomes bootable
2: install Rom manager (It is not available in China) but I have an .apk So now I install File manager from market, first.
3: Root phone
4: startup
5: start Rom manager, run "flash clockwordmod recovery" select "LG/T-mobile G2X" (Is this the right one?)
6: Choose "reboot into recovery"
7: Choose Factory reset-> Wipe cache and install zip from SD (First CM7.1 then Gapps)
8: Reboot (This is where it hangs on the marvellous blue LG logo)
I think I might be doing something wrong regarding the Recovery (No. 5 or 6)
But please point out what I might be doing wrong..
Looking forward to yoyur assistance
Lyhne1
You did it wrong by step 5 you have to choose lg optimus 2x and not lg g2x of t-mobile
Sent from my LG-P990 using xda premium
Thanks tekingenc for a very fast reply.
I just do not have the option for the optimus 2X.. Is my clockword old?
I am in China and Clockworkmod has been blocked (Not commenting on that) on the market. So I am using an APK for installation, via File manager (Astro is also blocked)
Any clue as to where I might find a version that includes p990?
Which version of Rom manager do you have?
The latest is 5.0.0.6
Take a look at Rusty's method: http://forum.xda-developers.com/showthread.php?t=1327599
Hi
I have 4.4.0.3
Try to download rom manager from here http://www.apktops.com/rom-manager-5-0-0-3.html
panospc said:
Which version of Rom manager do you have?
The latest is 5.0.0.6
Take a look at Rusty's method: http://forum.xda-developers.com/showthread.php?t=1327599
Click to expand...
Click to collapse
Wow. Now Finally I see the Cyanogenmod startup screen!!
I owe you a beer
I didn't use the SU303.zip, what was that for?
lyhne1 said:
I didn't use the SU303.zip, what was that for?
Click to expand...
Click to collapse
You don't need it, it's necessary only if you want to root the stock version
lyhne1 said:
I am trying hard to flash my phone with the latest stable Cyanogenmod (7.1)
Click to expand...
Click to collapse
7.1 is too old, maybe you should try to flash the latest Temasek build, is pretty stable.
panospc said:
7.1 is too old, maybe you should try to flash the latest Temasek build, is pretty stable.
Click to expand...
Click to collapse
Thanks. I just want something really stable. As you've guessed I don't know a lot about these things. I just wanted something that was a bit more responsive than the stock, provided from LG (I can't believe hos slow it is) Which made my p990 feel as fast as my HTC Legend..
Its probably better to install a ROM via the CWM console instead of using ROM manager .. Specially if you have differently mapped sdcard mount partitions.. But then ROM manager isnt that bad
::::
hi all guys...i just bought the optimus x2 lg......i still new to all it's features but i m not completly noob to phones i know lots of things. The thing i want to ask is: whats is all about the change to Cyanoenmod? where it helps? should i do it also?
a8az said:
hi all guys...i just bought the optimus x2 lg......i still new to all it's features but i m not completly noob to phones i know lots of things. The thing i want to ask is: whats is all about the change to Cyanoenmod? where it helps? should i do it also?
Click to expand...
Click to collapse
CyanogenMod is nothing more than a custom rom for your phone. You can change your rom after you've rooted your phone. A rom is more or less the software what runs on your phone.
You probably got your O2X fresh out of the box with a stock (crappy) LG rom on it. Well, my advise is to change your rom because sooner or later you'll find out that the stock rom is really bad.
You don't 'have to' change to CyanogenMod, because this is obviously your choice. There are many other custom roms in the dev section like MIUI, or improved stock roms. You just have to read the threads, look at the screenshots, read the reviews and make up your own mind.

[Q] ics camera youtube vids!?

Hi all i recently got a galaxy 8.9 gt-p7310 tab with ics already on is there anyway to use the camera with ics ? also cant view videos on youtube can any1 help me with this
markojadeo said:
Hi all i recently got a galaxy 8.9 gt-p7310 tab with ics already on is there anyway to use the camera with ics ? also cant view videos on youtube can any1 help me with this
Click to expand...
Click to collapse
you got a tab with ics installed???? im guessing you bought it used and someone installed one of the custom roms...if you got it new with ICS this would be quite something.
camera so far doesn't work in any ics rom. if you want the camera you gotta flash honeycomb again.
has for youtube HW videos not working im guessing the custom rom istalled is an old version. the newer ones work fine with youtube. i would flash the newest version of soup or cm9 if i were you.
lol yes its used as you can prob guess i'am abit new to tabs its my 1st one! so you suggest returning to stock fireware not starting a fresh?
markojadeo said:
lol yes its used as you can prob guess i'am abit new to tabs its my 1st one! so you suggest returning to stock fireware not starting a fresh?
Click to expand...
Click to collapse
its your decision. if you need the camera honeycomb is your only option at the moment. (stock/overcome/ganbarou)
if not i would definately advise you to use ICS. check the developement thread and chose one of the newer ICS versions. (soup/cm9)
http://forum.xda-developers.com/forumdisplay.php?f=1441
Just to double check seeing as i'am a noob i dont have to do anything other than download n install the cm9 update? i dont need to flash before hand do i?
markojadeo said:
Just to double check seeing as i'am a noob i dont have to do anything other than download n install the cm9 update? i dont need to flash before hand do i?
Click to expand...
Click to collapse
i would advise you to read the great guide by nirogu:
http://forum.xda-developers.com/showthread.php?t=1406137
you download the zip. copy it to your tab. then reboot into recovery (which im guessing is installed)
then do a full factory reset / wipe (warning this will delete your apps but not your data like photos/music etc)
then select flash .zip and chose the zip file containing the rom. let it install and you are done.
but READ THE GUIDE! you will learn a lot and a lot of question you have will be answered!!
cheers pal

[ROM][Stock][ICS] LG P990 Stock ICS flashable zip by harsh & tonyp (based on v28e) He

[ROM][Stock][ICS] LG P990 Stock ICS flashable zip by harsh & tonyp (based on v28e) He
[ROM][Stock][ICS] LG P990 Stock ICS flashable zip by harsh & tonyp (based on v28e) Help!!!
Hello good for those who do not know what is this ROM here is the link
It's a fabulous ROM everything works excellently but the only problem I have is that this does not lift on that 3G network says it is disconnected but not if others have this problem! I have tried to change the BB but without success! Verda and it's a shame that took months looking for a ROM like this and now I get this who knows of any way to fix it? the model is P990h Movistar Venezuela and published it here because I can not in the other forum for noob! ejeje hope someone can help me thanks! xD!:angel:
Ugh... Was it really necessary to make your entire post the size of a tabloid header?
You are saying you tried changing the BB unsuccessfully. What did you try? What error(s) did you get? If you want to get help, you need to be more specific than that... The short answer: to flash a BB, you need the FLS file and SmartFlash. The procedure has been described many times, just search for it. To get you started, take a look at this very useful thread by tonyp. If you need more details, you have to provide more details with your question.
I hav flashed this rom and everything works perfectly but i am not ablr to enter cwm. I tried rom manager but then to i was not able to install cwm.. plz help me with this.. Thnx in advance :crying:
afzalp500 said:
I hav flashed this rom and everything works perfectly but i am not ablr to enter cwm. I tried rom manager but then to i was not able to install cwm.. plz help me with this.. Thnx in advance :crying:
Click to expand...
Click to collapse
Dry your eyes!!!!
You need to access CWM from boot.
Power down phone, press Volume Down and then Power button. Keep pressing until second bootlogo appears, then you are in CWM.
gps problem
hy guys iam new to this forum ive read very much but i cant fix it myself
first i want to thank tonyp and harsh for this amazing rom! everything works fine except gps.
The only time my gps worked like it should was with the chuck norris rom based on cm7
Has anyone an idea what i could try like i sayd i dont know much about this stuff
Thanks alot
napster3001 said:
[ROM][Stock][ICS] LG P990 Stock ICS flashable zip by harsh & tonyp (based on v28e) Help!!!
Hello good for those who do not know what is this ROM here is the link
It's a fabulous ROM everything works excellently but the only problem I have is that this does not lift on that 3G network says it is disconnected but not if others have this problem! I have tried to change the BB but without success! Verda and it's a shame that took months looking for a ROM like this and now I get this who knows of any way to fix it? the model is P990h Movistar Venezuela and published it here because I can not in the other forum for noob! ejeje hope someone can help me thanks! xD!:angel:
Click to expand...
Click to collapse
Hi,
Google search isn't there for me, in the ROM! Play Store is present and I downloaded GMail from the market. I don't know how to get Search. tried flashing a couple of Gapps but it kept crashing, saying google.process.login.gsf stopped unexpectedly. Any support here?
play store doesn't work after "Full Brick Repair"
Mewbie here... just downloaded the flash/ROM tool from http://forum.xda-developers.com/showthread.php?t=1975274 and installed on my LG Optimus 2x (I'm with Canada Fido), and installation went smoothly.
But there is no "play store" included. I managed to download one online and installed (com.android.vending-3.9.17.apk), but it doesn't work!! It just flashes for half a second and closes itself. I went to manage apps, and see it's still running (there's "force close" option). Closed it and try to restart it, the same thing. I tried to roboot phone a couple of times, same thing. Tried to uninstall and install again, same thing.
Please help?? Many thanks!
sdssrr said:
Mewbie here... just downloaded the flash/ROM tool from http://forum.xda-developers.com/showthread.php?t=1975274 and installed on my LG Optimus 2x (I'm with Canada Fido), and installation went smoothly.
But there is no "play store" included. I managed to download one online and installed (com.android.vending-3.9.17.apk), but it doesn't work!! It just flashes for half a second and closes itself. I went to manage apps, and see it's still running (there's "force close" option). Closed it and try to restart it, the same thing. I tried to roboot phone a couple of times, same thing. Tried to uninstall and install again, same thing.
Please help?? Many thanks!
Click to expand...
Click to collapse
gokulnath said:
Hi,
Google search isn't there for me, in the ROM! Play Store is present and I downloaded GMail from the market. I don't know how to get Search. tried flashing a couple of Gapps but it kept crashing, saying google.process.login.gsf stopped unexpectedly. Any support here?
Click to expand...
Click to collapse
guys you need to flash gapps
link http://www.mediafire.com/download.php?1kmuc8hb925obet
massimo69 said:
guys you need to flash gapps
link http://www.mediafire.com/download.php?1kmuc8hb925obet
Click to expand...
Click to collapse
No you don't.
The playstore is included, no idea why some people have problems?
Sent from my LG-P990 using xda app-developers app

[Q&A] [ROM][KitKat] CM11.0 for the LG 2x

Q&A for [ROM][KitKat] CM11.0 for the LG 2x
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KitKat] CM11.0 for the LG 2x. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Quick help for a newbe: where to find New Bootloader
Hi there,
I am a newbe that wants to load a custom rom on my LG P990.
I've read a lot about it already and on this forum etc.
I hope you are willing to provide me a few sentences explanation:
* I want to load CM11, I need the New Bootloader for that. Where can I find the New Bootloader?
* I also found out that there is an All In One Toolkit. Does this toolkit include the New Bootloader? Can I use this All In One Toolkit for flashing CM11 to LG P990?
* It does not become clear to me if I only need to download the ROM or also the kernel? Or does the ROM already include the correct kernel? (e.g. following this latest build/update on this XDA forum: post by gucky01 on 25 Oct. 08:41)
* Finally you can maybe provide me a few words on the difference between 3.1 and M1? Why have two sources of ROMs been developed, why not just continue with 1?
Thanks a lot!
In aio u can change bootloaders
Flash with recovery the twrp 2.7.10.zip search it in development. After boot to your twrp recovery make wipe
And install the rom
The kernel is inside the cm11 rom
OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.
See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads
foober said:
See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads
Click to expand...
Click to collapse
Here you are
DaveCool said:
OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.
Click to expand...
Click to collapse
See?
Bad Battery - Battery life (Advice)
If some of you have noticed sudden "reboot" let's say, I have got an advice for you!
Some months ago, my phone suddenly turned off even if the battery level was up to 80 percent. I was pretty shocked and I did not know what that means. Then my phone tried to reboot but it stucked in bootloop and I could not turn on the phone. Is it caused by rom? I thought. So I removed the battery and inserted back again. I plugged in the charger and then I was able to boot my phone again. It happened very often and I was crying a lot.
It was very annoying so I decided to buy a new battery. I replaced the old one by the new one and now everything works perfectly.
And of course it will take some time to get the new battery working well (I recommend full charging cycles (from 20 percent to 100 percent)).
Do not discharge your battery to 0 percent. It does not like any of the Li-ion batteries.
touch my phone does not work
please help me !
can you teach me how to build tonyp's source code ,thks!
it sees some code not in tonyp's framework/base ,like getSimNameBySubScription.
sorry,i'm not good at english.
Battery Charge Issue
First of all thank you tonyp and all others who worked to get Kit-Kat for our old phones and make it new again
However I have below questions - would be really grateful if someone would help me with them. I am on M1 Jul 21:41:16 CEST2014-20140716
1) I am unable to upgrade my M1 with CWM and TWRP with all versions and all possible wipe methods, was trying to update (gucky01) weekly updates but always ended up in an error, tried dirty, clean dalvik, clean partation..aah everything, but no go
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Let me know if there are any workarounds for above posted questions.
Thank you again to all developers, god bless you all
link for the updates
can someone please give me the link to download the new updates
Hey guys, i'd like to ask:
Running 13. October build w/optimizations and latest 3.1 KK.
When I manage to get oom (4 tabs in browser or so), phone becomes unresponsive (as expected), but then the notification bar gets really laggy. Interesting is that when it's extracted to fullscreen, the animations are really slow (5 fps or so) , but when the less i see from navbar, the faster it is. (When i swipe down the bar for just a little bit, it doesn't even lag). Do you know what can cause this problem? I thought it might be rendering problems after systemui.apk got forceclosed while oom.
Sent from my LG-P990 using XDA Premium 4 mobile app
F2FS Support
Can you make a version with F2FS like DJNoXD did?
Unknown issue with Google Play services
Update: I found a solution. Please see post #20 below.
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
I have installed some of the latest Google apps such as Maps, Play Music, and Hangouts.
Google Play services is currently version 6.5.99 on my phone. I've tried clearing the cache and can't see how to reinstall it.
Any help would be greatly appreciated, thanks.
Everything is great except for the camera. I have a problem when recording video . picture freezes . I do not have that problem with ICS . I use the kernel M1 .
Anyone have problem with mobile data?I use last tonyp rom and its fantastic,but same problem i have like on previous roms,mobile data crashed all the time...
Video recording and mobile data work fine here.
Sent from my LG-E435 using XDA Free mobile app
radio FM
there is any way to see the radio fm work on cm11 like the stock rom?
djpagz said:
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Click to expand...
Click to collapse
As lubosmj says above in post #7, try getting a new battery. I got one off ebay for a cheap price and it really helped!
[solved] Unknown issue with Google Play services
jonomcleish said:
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
Click to expand...
Click to collapse
Hey all, I solved this by updating Google Play services to version 6.6.03. You can find and download it on MihirGosai's [APPs] [SHARE] Google Play Services 6.7.74 and Google Play Games 2.2.09 thread.
Not sure if it made a difference but I also switched from CWM to TWRP 2.8.1.0 found on DJNoXD's [RECOVERY] [newbl] TWRP 2.8.1.0 touch recovery [2014-11-30] thread.
Things seem a lot more stable after these two changes.
Thanks for the awesome ROMs tonyp!!

[Q&A] [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S

Q&A for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Memory leak?
First of all thank you very much to everybody who has been taking apart of developping this rom. It works generally really well. However my SGS has developped some sort of memory leak. During usage it starts litle by litle to loose amount of available memory and at the same time the amount of preloaded apps to memory is also shrinking(according to settings). Eventually available memory goes under 50Mb and phone slows down to unusable. Restart fixes the problem. Sotimes it works days or even a week sometime less.
This same problem aready existed with he origial rom(2.2.1). Eaven after a factory reset it only worked well a couple of hours. Updated with odin to 2.3.6 but touchwiz launcher was freesing all the time. Installed CM11 trough CM9 and formatted system and wiped caches before C11 . Everyting seems to work well but the original problem still remains. Although it now works much longer than with the original rom.
Hardware problem? Some app causing this(only apps running all the time is whatsapp and smooth calendar(according to settings))? Time to buy a new phone?
viber
my viber dont work after install gapps
how i can fix this problem ?
getting status 0 error
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
newguysgsi9000 said:
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
Click to expand...
Click to collapse
So now when you have CM9, you should flash CM10.2. It is normal that it first warns, as system partition will be enlarged.
So in fact you must flash it three times and reboot. First time it will only warn of data lost due to upcoming repartition. Second time it will only update recovery to CWM 6.0.4.5. Third time it will flash ROM and after that you must reboot the device.
After being booted into the OS once, you can install CM11. Recovery versions older than CWM 6.0.4.5 or TWRP 2.6.3.1 can not flash KitKat.
tetakpatalked from Nexus 7 flo
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
yasvi9 said:
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
Click to expand...
Click to collapse
You are in totally wrong thread here, this is for Samsung phone i9000, Galaxy S, first version.
Find threads for your Tab, they have there also much nicer ROMs than Cyanogenmod.
tetakpatalked from Nexus 7 flo
Cannot go into CW recovery mode to load Cyanogenmod
Posted in wrong thread, long night, sorry
cm12 ????
Hello guys! This is my first post here. I couldnt read all 300+ pages thats why i wanted to ask you. I read only positive comments about this rom but I can not se anyone having Bettery drain problem. I installed the ROM 2 days ago and the battery is just draining so fast. For example yesterday I took my phone off the charger at 11:00am and until 04:00pm it had 15 percent battery remaining with only little using and browsing the web for like 5-10 minutes. I can't be the only one having this problem. In the settings I see the Google play services, android system and display are having the best percentage. Please give me some answer or solution to this. I cant use my phone for just few hours a day.
Problem with virginmobile after cm11 install
My apn is set to ee carrier, instead of virginmobile and my carrier shows as orange - uk carriers btw. I know vm piggyback on ee network but when I search for carriers hardly any show up. Is this a known problem and is there a fix (modem flash or other).
Is the nightly 11 version smoother when compared to the stable 10.2.1? What are the main bugs, if any?
Is there any way to make art runtime to work? I'm using the latest nightly but it stucks in bootloop each time i select art
Problem with touch-input
I have a question concerning a bug I am experiencing. Often I am not able to make any touch-command on the right wing of the screen, about 1cm, this is especially annoying when it happens during typing. I did not experience the same bug on the original firmware, I believe. The occurence is not bound to any special app, it even happens on the Home screen.
Is this a known bug and is anyone experiencing the same? Any suggestions what causes this?
Is there a way to increase the RAM and speed up the phone?
So I installed this ROM (11-20311118-UNOFFICIAL-galaxysmtd which is one of the older versions of CyanogenMod 11) on my Samsung Galaxy S i9000, but I encountered a few issues:
- I occasionally lose the Wi-Fi connection, and although it does reconnect itself in a short time, there is a problem with some online games — when the connection is lost, the game is lost which really bothers me.
- Some of the apps that seek a lot RAM memory to be used are really slow-running, like for example Snapchat — the back camera can barely be used and the snaps need much time to open.
- The screen can be unlocked without having to slide, that can be done by only pressing the button on the left side of the home button, which is probably a minor issue.
- Sometimes the phone just bricks when I get a call and I can't answer it, which is one of the major issues.
So, I wanna know if there is a way to fix these issues and maybe a way to increase my RAM memory or get Snapchat to work smoothly. Also, I wanted to ask if some of the newer versions of CyanogenMod 11 (KitKat 4.4) or any other ROM, like Jelly Bean 4.3 or the SlimCat ROMs, can fix any of the mentioned issues. What is the best ROM for my Samsung Galaxy S i9000?
Thanks in advance!
Deleted
Why was this deleted?
tetakpatak said:
Deleted
Click to expand...
Click to collapse
I really need help with this, why would you delete it?
xtremeaptitude said:
I really need help with this, why would you delete it?
Click to expand...
Click to collapse
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
tetakpatak said:
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
Click to expand...
Click to collapse
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
xtremeaptitude said:
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
Click to expand...
Click to collapse
OK, mate.... you seem to be nice fellow, so I will try to help, answers in order of your questions:
if you have dirty flashed CM11 build (over older version without formatting /data and /system): did you try pawitp's reset of wifi settings from the bottom of the OP in CM11 thread? Otherwise also changing wifi region might help (settings/wifi/advanced)
the i9000 has indeed only total 512 MB memory, of which some 364 MB can be used normally. Well, you can increase these by flashing in recovery mode zips of Semaphore kernel for KK (3.4.3) and right after that BigMem libs for KK from Mackay KK ROM Thread. Then enable in the app "Semaphore Manager" (Play Store) BigMem option, reboot, and you will have by default 407 MB memory.
I fail to understand your last question: do you mean that the phone freezes, reboots, or "brick"? Bricking would mean that your OS fails and you have to flash ROM again or restore backup??
Good morning guys.
I use Mia ROM rooted fw 2.2.1 on my Galaxy SL i9003.
Can i flash directly this ROM on my device to update it or there are other best light ROM for my device?
Thank you
Inviato dal mio Zp 998 utilizzando Tapatalk 2

Categories

Resources