Related
Hi all
After rooting and installing clockworkmod recovery from ROM manager but i want to install new rom only 4 option exist ghey are ;
Reboot system now
Apply sdcard:update.zip
Wiipe data/..
Wipe cache/..
Also show
Multicsc : src /system/csc/XEU/system/
Thanks a lot.
Sent from my HTC Desire using XDA App
you are still on stock recovery,
i assume ROM manager will of created update.zip so what you need to do is select : apply sdcard:update.zip
you may need to do this 2-3 times before automatically going into CWM (you will notice the difference)
azzledazzle said:
you are still on stock recovery,
i assume ROM manager will of created update.zip so what you need to do is select : apply sdcard:update.zip
you may need to do this 2-3 times before automatically going into CWM (you will notice the difference)
Click to expand...
Click to collapse
How to out from stock? Or how to fix and getting options like backup/restore .?
I changed the rom name to update.zip but also doesnt work.
Thanks.
Sent from my HTC Desire using XDA App
arrrr....... im sorry i misread your post.
you dont have CWM at all. either try ROM manager again. or flash CF-Root / kernel thru Odin, that will give you 2e / CWM recovery which will allow you to flash the ROM.
You CANNOT flash ROMS with 3e (stock) android recovery
cutiyar said:
How to out from stock? Or how to fix and getting options like backup/restore .?
I changed the rom name to update.zip but also doesnt work.
Thanks.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
you can only install CWM via this method if your recovery is version 2e (or something like that)
if you want to be sure check your rom version and find a hacked kernel (speedmod or voodoo) with CWM and install it using the PDA box in odin nothing else (no pit, no modem etc) and make sure repartition is unchecked. I found this worked when others methods failed.
Yes its 2e
There is any method without odin?
Because iam.using linux.
Thanks.
Sent from my HTC Desire using XDA App
cutiyar said:
Yes its 2e
There is any method without odin?
Because iam.using linux.
Thanks.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
there is an equivilent app for linux cant remember what it is but if you search you should be able to find it in these forums.
think it's called heimdall or something like that or I have seen something about running it virtual box
Ok thanksi will search.
Sent from my HTC Desire using XDA App
I was having a few dramas getting CWM Recovery to run on the stock JVB Ginger ROM. I put in the CF-Root-XW_XEE_JVB-v3.1-CWM3RFS flash with Odin 1.3 a few times, but couldn't get my device to boot into it with 'three-buttons'. I then went into Settings/Applications/Development, turned USB debugging to ON, restarted the phone with 'three-buttons' and voila, away we went...
Rom manager
azzledazzle said:
you are still on stock recovery,
i assume ROM manager will of created update.zip so what you need to do is select : apply sdcard:update.zip
you may need to do this 2-3 times before automatically going into CWM (you will notice the difference)
Click to expand...
Click to collapse
i tried this but it says
E: failed to verify whole-file signature
E: signature verification failed
installation aborted
any solutions on this one? i wanna back up m y current rom before i flash i new one thanks
I've downloaded ROM manager and clicked on 'flash clockwork recovery'. this placed a 'update.zip' onto my phone. I downloaded a custom ROM and placed this zip in the same place. in ROM manager i choose install from sd card, locate the custom rom and select it. i reboot into clockwork recovery mode and i get the 'android system recovery mode' The options at the top are in blue. i believe this is wrong?
I'm led to believe i should click on 'apply sdcard:update.zip' but when i do i get
E:failed to verify whole-file signature
E:signature verification failed
Install aborted
I'm using a samsung galaxy s with the standard orange rom.
Any ideas?
U need to root your device first... flash a kernel like speedmod and it'll rot ur device after this u can install ur custom rom. remember while flashing via odin repartition should be unchecked
You would root and then just need to flash update.zip, dont place rom anywhere near it. I would delete your current update.zip and go through process (minus rom) again.
Alternatively and easier, is what ^^ he said.
Sent from my GT-I9000 using XDA Premium App
I've already rooted my phone.
Dont i need to put the downloaded mod on my sdcard to install it? :/
Rom manager puts the update.zip file there but when i try to run it it fails :/
Yep place the rom into sdcard/
Sometimes in stock recovery, you may have to choose flash update.zip twice to install cwm
However
Mate, if you can use odin, just flash a pre rooted kernel with cwm installed. Should take about 5 mins to download and flash. Chainfire would probably be my recommendation.
Make sure you read kernel flashing instructions before you start.
Sent from my GT-I9000 using XDA Premium App
Meant to edit above.
woolf clubs said:
Yep place the rom into sdcard/
Sometimes in stock recovery, you may have to choose flash update.zip twice to install cwm
However
Mate, if you can use odin, just flash a pre rooted kernel with cwm installed. Should take about 5 mins to download and flash. Chainfire would probably be my recommendation.
Make sure you read kernel flashing instructions before you start.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
When i hit the flash update zip i get the verification error :/
Ive tried it a few times so..
Okay i have odin and a kernel.
Only thing is i need to get to get my phone to download mode to apply the kernel through odin?
And my phone wont go into this mode :/ or recovery mode
How did you root?
Sent from my GT-I9000 using XDA Premium App
I used superoneclick.
bad move?
Not at all, just curious. Can you not force download mode via adb? (havent needed to use it myself, so can't advise further)
i would suggest you apply the 3 button combo fix though before proceeding. If you can get into dl mode, its nigh impossible to brick, if not, then its all too easy.....
Dont rush mate, have a good search and read-up first.
Hope I've helped some.
Sent from my GT-I9000 using XDA Premium App
woolf clubs said:
Not at all, just curious. Can you not force download mode via adb? (havent needed to use it myself, so can't advise further)
i would suggest you apply the 3 button combo fix though before proceeding. If you can get into dl mode, its nigh impossible to brick, if not, then its all too easy.....
Dont rush mate, have a good search and read-up first.
Hope I've helped some.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I'll take a look at the 3 button combo fix and the adb method.
Thanks for all your help
No worries. Cwm method will only work with 2e recovery - if you have 3e, then you will need dl mode odin and kernel.
Sent from my GT-I9000 using XDA Premium App
I currently some how got the rooting onto my samsung capivate. It's fully rooted just without clockwork recovery mod. When ever i try to flash it on the device it says successful but when i reboot into recovery it just show me the same recovery as before it was even rooted.
So my question is when flashing a custom rom on the device do i have to use odin or can i use clockwork recovery directly?
Thank and much appreciated.
If you have recovery 2e you can simply install clockwork mod. If you have recovery 3e install a kernel that has clockwork mod built in using Odin. From then on you won't need Odin to flash a custom ROM. Simply use the install from zip option in clockwork.
Sent from my SGH-I897 using XDA App
Flash the update.zip twice. Since you don't have signature verification error, I an going to assume you are on 2.1. You have to flash the update.zip, then flash it again. Then you should see cwm.
mrhaley30705 said:
Flash the update.zip twice. Since you don't have signature verification error, I an going to assume you are on 2.1. You have to flash the update.zip, then flash it again. Then you should see cwm.
Click to expand...
Click to collapse
+1 took reinstalling packages 2x while flashing the CWM update.zip back when I first did it
+ 10 when I first flashed I had to select reinstall package like 3 or 4 times.
Sent from my SGH-I897 using XDA App
Dear Community, greetings.
I have a problem as wrote in the title: I can't boot into cwm recovery. I am gonna try to summarize the main points that lead me here.
Assumption
I used to install custom ROMS flawlessy, following always the instruction etc...
Last rom I've installed was CM7.2 Apocalypse, Project Silk and Link2SD
I needed to restore stock rom
I searched with Google and came across the following solutions
I searched on XDA and came across the following solutions
What I have done...
I flashed using odin 4.38 -> GB 2.3.6 2012 October 2.3.6 S5830XWKTS S5830ITVKT2 downloaded from sammobile.com
I rooted the phone with upd_1.zip (that is attached to this thread)
I tried to install recovery-clockwork-5.0.2.6-galaxyace-fix.zip
...and trying to boot into recovery pushing POWER BT + HOME BT the phone stucks on the screen with "Galaxy GT-S5830" and the top-left corner was green
What I have done #2
I tried to use S5830XXKA6 but I dind't neither managed to boot properly (wiped data/factory and cache)
Tried to flash CWM directly with Odin using "One Package"
Could you kindly help me out?:fingers-crossed: I am also willing to give you further information as you ask.
Thanks everyone for your time.:good:
F.
---- PARTIAL FIX by myself ----
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk and updated with Superuser 3.0 (attached)
4. Installed CWM 6.0.1.4
5. Restore an old backup of mine.
6. Rejoice
But your Phone is still working right ?
I mean you are able to use ur stock firmware ryt ?
Vishrut Chhajer said:
But your Phone is still working right ?
I mean you are able to you ur stock firmware ryt ?
Click to expand...
Click to collapse
First of all, thank you very much for the reply. Then, the answer is yes and no. I flashed several firmwares. Some of them did work, others don't. Right now I managed to use the one I've mentioned before and
S5830XWKT7_S5830ITVKT1_ITV
S5830XWKP6_XWKPN
but trying S5830_XXKA6 it goes in bootloop also wiping data and cache.
Further information:
I noticed a problem with CSC. While booting in standard recovery an error message appeared saying something like "can't open /system/csc/XEU/system", so I've created the whole directory path and put the files that were in /system/csc inside. This issue is fixed. I am going to investigate and let you know if with other firmware I listed above I get the same behaviour.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
You could alwayd manually move recovery.img with dd commands to your partitions
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
@everyone thanks for joining the discussion!:good:
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
Prawesome said:
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Click to expand...
Click to collapse
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
SpaceCaker said:
You could alwayd manually move recovery.img with dd commands to your partitions
Click to expand...
Click to collapse
@SpaceCaker I don't know how to do it. Could you explain, please?
SpaceCaker said:
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Fandonius said:
@everyone thanks for joining the discussion!:good:
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
@SpaceCaker I don't know how to do it. Could you explain, please?
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Click to expand...
Click to collapse
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
SpaceCaker said:
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Thanks, could you please upload the firmware you used, too?
Ok some little news:
I managed to flash CWM 6.0.1.8, tried to restore some of my old nand backup (also having mismatch and tricking it emptying the nandroid.md5) but had problems with linked partition sd-ext.
Obtained this error
make_extf4fs /block/mmcblk0p2
Click to expand...
Click to collapse
So tried to wipe/format, but after it stuck on boot.
Still waiting for the cwm 5.0.2.4. Can someone post it?
Thanks
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Fandonius said:
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Click to expand...
Click to collapse
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Fandonius said:
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Click to expand...
Click to collapse
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
R: [PARTIALLY-SOLVED] Galaxy Ace S5830 - Can't boot into cwm recovery
SnowPluralism said:
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Fandonius said:
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Click to expand...
Click to collapse
Leave cwm 6 ....flash stock rom via download mode and then flash cwm 5!
Sent from my GT-S5830 using xda app-developers app
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
I got the same problem, I googled and a link lead me to here.
I try to flash PX Recovery, but the result is same, stuck on boot logo.
Fandonius said:
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
Click to expand...
Click to collapse
If u already flashed cwm with rom manager theres nothing u can do about it!
Sent from my GT-I9300 using XDA Premium HD app
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Viper The Ripper said:
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Click to expand...
Click to collapse
Tried and doesn't work. Still stuck on boot logo
Hey Guys. Greetings. I wanted to update my galaxy note [GT-N7000, India] to Android OMNIRom 4.4.2 Kitkat nightly build from Android 4.1.2 [Kernel version DDLSC]. Following steps led to bricking my phone:-
1. I first installed philz custom kernel [Version DDLSC CWM version 6.0.3.7] so that I could have CWM and SU.
2. Then I went to CWM Recovery mode, did factory reset. Then Wipe Cache. Then Wipe Dalvik Cache. Then I tried applying the omnirom update. It failed and gave me some context error and status 7.
3. Then I restored my 4.1.2 image using the CWM recovery only.
4. I booted into 4.1.2 and tried updating the CWM to 6.0.4.3 using ROM Manager. It succeded.
5. I went back again to recovery mode but it said again 6.0.3.7.
6. I tried applying update to CWM from CWM itself. It stuck at something like “replacing the stock recovery….”.
7. I powered off my phone. It went into boot loop once but somehow it started.
8. Then again I went into ROM manager and selected Boot into recovery mode.
9. It bricked my phone. Unable to boot since then. I cannot access recovery mode but I can access download/ODIN mode.
Here’s what I tried to do.
1. Downloaded CWM 6.0.4.3 touch .zip from clockworkmode.com
2. Renamed it to recovery.img.
3. Converted it to tar.md5 using img to tar tool.
4. Using Odin version 3.07, I tried flashing CWM.6.0.4.3.tar.md5 It stucks at NAND Write start.
Please help me recover my phone.
Specs: Samsung Galaxy NOTE GT-N7000
Original firmware: 4.1.2 kernelDLSC
16 GB internal usb storage
Country India.
chirags1986 said:
Bricked Galaxy Note GT-N7000 using CWM
Click to expand...
Click to collapse
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
my device bricked
nokiamodeln91 said:
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
Click to expand...
Click to collapse
i flash philz kernel
then i wanted to flash cm11 so
i wiped data
wiped cache
wiped system
wiped dalvik
then i selected cm11 and it showed error status7
so i restored my backup rom
now i restarted my device and it says system ui has stopped..
amiransari2 said:
i flash philz kernel
then i wanted to flash cm11 so
i wiped data
wiped cache
wiped system
wiped dalvik
then i selected cm11 and it showed error status7
so i restored my backup rom
now i restarted my device and it says system ui has stopped..
Click to expand...
Click to collapse
nokiamodeln91 said:
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Click to expand...
Click to collapse
Again you did not read properly.
bricked galaxy note gt n7000 using cwm
nokiamodeln91 said:
Again you did not read properly.
Click to expand...
Click to collapse
srry but i have flashed stock rom using odin now my prob is solved.......but why that prob incurred
Hello Sir,
I have the same problem as that guy above. I am unable to boot into download mode itself. How can I connect to odin? Please help sir.
nokiamodeln91 said:
Few things you should have already read and understood.
1. Note N7000 doesn't have a separate active recovery partitions as the S3 and so on.. The recovery is built in to the kernel. So flashing Philz was a correct step.
2. You cannot update the recovery using ROM manager as it writes to the recovery partition which this phone doesn't use. Thus you didn't get the updated recovery.
3. Using odin will not work due to 1&2
Download the Philz kernel DDLC tar version and flash using Odin (uncheck Auto reboot). Once it shows Pass, then power off the phone and remove the usb cable. Boot into recovery using the vol up+home+power. The flash a kernel like Raw r4/r5. reboot into recovery and wipe. Flash Omni, Gapps, SU. Reboot.
Revive your phone by flashing stock firmware using.
So its not really "Bricked Galaxy Note GT-N7000 using CWM" but bricked due to sheer ignorance.
Click to expand...
Click to collapse
techblazes said:
Hello Sir,
I have the same problem as that guy above. I am unable to boot into download mode itself. How can I connect to odin? Please help sir.
Click to expand...
Click to collapse
So no download and recovery mode? Is your battery charged?
nokiamodeln91 said:
So no download and recovery mode? Is your battery charged?
Click to expand...
Click to collapse
I got the download mode after removing and replacing the battery sir. But ODIN is not showing Added message when I connect my device...
techblazes said:
I got the download mode after removing and replacing the battery sir. But ODIN is not showing Added message when I connect my device...
Click to expand...
Click to collapse
Try different USB port, cables, and check if the drivers are installed properly.. Samsung USB drivers..
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Got into the same problem as the OP. Wiped everyting and only have Phliz recovery. Couldn't flash CM11 because according to CM thread must have latest version of CWM (6.0.3.4) while the philz recovery I installed is based on 6.0.2.7. Couldn't flash newer recovery I downloaded from CWM site, it would just freeze and get stuck.
My solution is to just flash CM10.1.3 stable plus gapps. Worked fine. Then proceed from there.
You must have CWM 6.0.4.4 or higher, which is fully SELinux compatible for KitKat.
Just flash Raw kernel r4, reboot in recovery (of raw kernel ) and then do your flash and wipes.
You can't simply install a newer recovery on our device, as kernel and recovery are bound together, but ...THIS IS BASIC KNOWLEDGE FOR OUR DEVICE!!!
#fail²
Just resurrecting this!
After failing to flash KitKat because I had Philz kernel installed, I've got into a real mess.
I'm trying to flash raw kernel r5 but recovery isn't able to mount the SD card and so can't see the zip files on it.
I'm on a Mac and don't have Bootcamp so can't use Odin. Any suggestions?
Oops didnt realise this was kinda necroed :/
Same problem...i have brisked my N7000
i want to know where you have got stock ROM 4.1.2....please help me sir. regards,
manojleo79 said:
i want to know where you have got stock ROM 4.1.2....please help me sir. regards,
Click to expand...
Click to collapse
Go find what you want Here
chirags1986 said:
Here’s what I tried to do.
1. Downloaded CWM 6.0.4.3 touch .zip from clockworkmode.com
2. Renamed it to recovery.img.
3. Converted it to tar.md5 using img to tar tool.
4. Using Odin version 3.07, I tried flashing CWM.6.0.4.3.tar.md5 It stucks at NAND Write start.
Please help me recover my phone.
Specs: Samsung Galaxy NOTE GT-N7000
Original firmware: 4.1.2 kernelDLSC
16 GB internal usb storage
Country India.
Click to expand...
Click to collapse
No need to do all this ^
Flash this using ODIN. Pick the tar file
techblazes said:
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Click to expand...
Click to collapse
Hi all,
I too have the same problem, tried following as instructed
- Download the Philz kernel DDLC tar version (PhilZ-cwm6-DDLSC-ODD-5.11.2.tar)
- flashed using Odin by unchecking Auto reboot option
- Once it showed Pass( it also showed RESTE then went on to became green), then power off the phone and removed the usb cable.
- Tried to boot into recovery by using the vol up+home+power
unfortunately got stuck in the initial screen with yellow triangle
Kindly help
---------- Post added at 04:22 AM ---------- Previous post was at 04:07 AM ----------
techblazes said:
Looks like the drivers are working back after using Kies. Now I connected the device and ODIN is doing its task. Will update if it successfully finishes the job.
Thanks
Edit: Everything is working as expected. ODIN has flashed CWM on my device and now I am restoring my device using the backup I created yesterday...
Click to expand...
Click to collapse
Hi all,
I am new to XDA, and has been following XDA for ROM upgradation on my GTN7000 Samsung note
But today I have landed in the problem when I tried to upgrade the CWM through ROM manager. May be because of half knowledge.
After searching on the XDA I came across above thread identical to the issue I am facing wit same note config, with a great relief I tried to replicate the same for my N7000
steps followed.
- Download the Philz kernel DDLC tar version (PhilZ-cwm6-DDLSC-ODD-5.11.2.tar)
- flashed using Odin by unchecking Auto reboot option
- Once it showed Pass( it also showed RESTE then went on to became green), then power off the phone and removed the usb cable.
- Tried to boot into recovery by using the vol up+home+power
unfortunately got stuck in the initial screen with yellow triangle
Kindly help.
Hi Experts,
please help. I am still stuck with yellow triangle and samsung logo.
Regards
n7000g said:
Hi Experts,
please help. I am still stuck with yellow triangle and samsung logo.
Regards
Click to expand...
Click to collapse
Try downloading XXLTA stock firmware. Flash it with odin, after finished reboot to stock recovery n do a factory wipe reset, reboot. After that download phils XXLTA kernel and flash it in stock recovery. It will give u root n phils recovery. After that u can do whatever u want with ur phone
Sent from my GT-N7000 using XDA Free mobile app