Database Develop

Super One click stuck during root

Hello everyone, this is my first post on XDA
I am trying to root my girlfriend's galaxy S and having few difficulties:
I'm using SuperOneClick and I connected my device into the PC, i pressed "root"
after it wrote "daemon started successfully" it went "OK" and then "waiting for device"... and that's it now its not responding and i dont know if i should unplug the device ot retry or whatever...
Before i tried using One click lag fix but it prompt "item could not be found" and said "root was successful" but it wasnt so "successful" according to titanium backup.
device: galaxy s GT-i9000
firmware version: 2.2
kernel version: 2.6.32.9 [email protected]_ANRD_SRV2 #1
build version number: froyo.JIJPA.
Thank you in advance.

http://forum.xda-developers.com/showthread.php?t=788108
Upgrade ur firmware to JPY....

Use cf root instead of one click

after i installed CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1_NO-CWM.zip via odin as PDA the device just keeps restarting.
it goes till the homepage and then reboots again showing the company's screen.
after installation the device booted and then it started rebooting over and over, i unplugged the device from the pc and it keeps rebooting
what can i do?
odin log:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Removed!!

Go get your firmware from the stock thread in general or one of Ramad's pre rooted firmwares. Follow the instructions to flash. You just need to reflash, it'll work out just fine. Then worry about kernels.
Speed mod kernel is what worked best for me in FroYo to lag fix and root, I recommend it highly.
Sent from my GT-I9000M using XDA App

now it seems the device is bricked.
i cant access download and recovery mode and got a screen of a phone and a pc and yellow triangle between them.
is there anything i can do?
edit:
i got into download mode what can i do now? im really nervous, where can i find the instructions to flush.
im on download mode right now, can i turn of the device without bricking it?

This happened to me once, don't panic. Take out your battery, plug in your phone to the charger and use the 3 button combo to get into download. You can repair from this screen. The phone ! Pc is only a soft brick.
Sent from my GT-I9000M using XDA App

First, thanks for your help dude,
I thought the phone is dead, but i said lets try one more time before i go to fix it somewhere.
Now im in download mode, can i flash rom with a tar file i have, its a stock rom of the company i bought it from, i need other file then .tar or the .tar is enough?
can i plug it to the charger while in download mode?

No problem buddy.
If the tar is a full rom, flash it as a PDA with no other files. Make sure repartition is not checked.
You can plug it in, but there is no over charge protection so make sure it doesn't overheat for too long. You do need the battery to be over 65% though, to flash safely.other than that, flash normally. Tell me if you need instructions on flashing.
Sent from my GT-I9000M using XDA App

this is how i flash:
get my device to download mode.
open odin v1.7, open the tar file as PDA
connect the device to the usb, auto reboot and F.reset time and the only option checked and then i press "start".
Is there anything else i have to do?
OK i installed JVQ stock rom and its working
I thank you very much my friend you helped me alot.
now i wanna install semphore kernel, how i do it via odin?

Make sure to kill all kies processes in the task manager before starting. Make sure you have the usb drivers installed. Also start and get odin ready before plugging in your phone in download mode.
That's about it, you should be fine.
Sent from my GT-I9000M using XDA App

well i flashed the kernel, but now i cant download apps from the market, it just get stuck on "starting download"...
i can browse the web but cant download....
any ideas?

Did you do a factory reset and clear your cache? That's usually where my errors came from. Beyond that I'm not sure.
Sent from my GT-I9000M using XDA App

Go to http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
Download, use Odin to install

Can't flash with Odin - Please help!

I have been trying to flash my Samsung Galaxy S i9000 for a week now with no success.
First off, it has a lot of problems connecting when I am in download mode. It has no problem at all when the phone is fully booted up, but Odin has a really hard time seeing it while the phone is in download mode. I have to restart the phone several times into download mode and pull the cable, etc until I can finally get Odin to see it.
Once I get Odin to finally see the phone in download mode I loaded the PIT and the PDA files from the tutorial for DarkyROM_10.2_Resurrection.
But when I hit start is just stops here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And will not go any further.
I originally rooted with one click, but I am afraid I might have messed that up. After I did the one click I was messing around with the phone and formatted the internal memory from the download screen. I even went back into one click to try to unroot, but it gives me an error message.
Did I mess up my phone? Is there any way to fix this?

have you ever succeeded in flashing with odin or first time?
have you closed all kies programs from task manager? (do you even have it installed?)
if you have win7, have you opened odin with right click menu->as administrator?
what ver. of odin do you use?
maybe the cable is faulty?
did you connect it directly to the comp or by some hub? (better connect directly)

guy7685,
No, I have never flashed before. This is the first time.
I tried running Odin as system admin, made no difference.
I do not have Kies installed.
I'm pretty sure the cable is good, it works fine for everything else including data transfer on my other phone, just not in download mode for this phone.
I've tried a few different versions. v1.30, v1.83, v1.85
When I tried in in v1.83 & v1.85 I get a fail, then this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any thoughts?

If you have another computer you can try it on, do that otherwise I think you need to install the drivers again. You can search for them or you can install them via kies. Once you have kies installed go to tools and install drivers.
Remember that before you open Odin you go through task manager to close all kies processes.
Good luck
Sent from my GT-I9000 using XDA

Got it to work
I was finally able to get it to work. I think I was using the wrong recovery screen or at least what I thought was a recovery screen because I finally got the guy in the construction picture and it flashed no problem with Odin.

After Odin Succes
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!

jimnycricket65 said:
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!
Click to expand...
Click to collapse
i have similar problem. Please have you gotten solution to this problem? Your help is appreciated. Thanks.

are you instaled drivers completly???

alireza17mah said:
are you instaled drivers completly???
Click to expand...
Click to collapse
Right Click -> Run As Administrator it should resolve the issue

If its showing the battery only then its probably the wrong flash file.
Sent from my GT-I9000 using xda app-developers app

[Q] how to root an SGN after flashing stock ICS with odin pc

i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?

AleksLenin said:
i want too root my phone! i just flashed the stock ICS ROM in Odin Pc.
i tried this - Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin.
but it didnt work. anyone knows the best way getting an ics stock rom rooted?
Click to expand...
Click to collapse
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270

re:
dr. xp55 said:
Either you flashed stock ICS, flashed that KJ1 file in odin, and you went back to Gingerbread (in that case, what happened? were you able to boot up? cause of different bootloaders) or you did NOT flash stock ICS and that file you flashed (KJ1) is an already, very old stock Gingerbread rom.
In any case, http://forum.xda-developers.com/showthread.php?t=1646270
Click to expand...
Click to collapse
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...

i flashed stock ics as well but i want to know if is safe to flash back to GB to root?

AleksLenin said:
i flashed stock ICS, flashed KJ1 in odin then I got problems on the boot up, cause of different bootloaders, android chrashed every time I tried to press the android man? i did an full wipe and now i back on stock ICS trying to root again...
Click to expand...
Click to collapse
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
nightfox11 said:
i flashed stock ics as well but i want to know if is safe to flash back to GB to root?
Click to expand...
Click to collapse
See me reply to gain root in ICS without going back to GB

matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
Click to expand...
Click to collapse
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day

dr. xp55 said:
I'd like to say thanks, haha, I did not see that earlier. Unfortunately, I ran out of thanks for the day
Click to expand...
Click to collapse
No worries, be proud you're trying your best to help and we all make mistakes

i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?

lol4it said:
i flashed my phone with odin but my screeen won't turn on?!
i hear sound etc but screen stays black?
what can i do?
Click to expand...
Click to collapse
Did you try a reflash?

matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse

anubis1126 said:
matius44 said:
You can flash CF-Root kernel with PC Odin but that will increase your flash counter..
Download the prerooted ICS ROM from this thread and flash it with PC Odin..
You'll have ICS ROM with root after flash
i did flash with pre rooted rom however no root access mobile odin cant work because of this any ideas
Click to expand...
Click to collapse
Are you sure you got the prerooted ROM? It's reported that it works..
You can get the CF-Root kernel from Chainfire's thread and flash it using "already rooted.bat" method described in post #2 of said thread..
If that did not work then your only way is Gingerbread, root it, flash ICS with Mobile Odin and keeping root
Click to expand...
Click to collapse

matius44 said:
Did you try a reflash?
Click to expand...
Click to collapse
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!

reflashed with the prerooted but no root access

lol4it said:
yes i've tried 3 times with 2 differents roms
EDIT:
dat happens:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
I have no idea why your screen is black, sorry..
Try to get a pit file for the 16GB Note and do repartition?
anubis1126 said:
reflashed with the prerooted but no root access
Click to expand...
Click to collapse
Then your only way is to flash directly rootable Gingerbread ROM and start from there, sorry..

where can i get a pit file??

lol4it said:
where can i get a pit file??
Click to expand...
Click to collapse
Search dr.ketan thread..use at your own risk..

matius44 said:
Search dr.ketan thread..use at your own risk..
Click to expand...
Click to collapse
anyways it doen't work now so can it be any worse using odin?

lol4it said:
anyways it doen't work now so can it be any worse using odin?
Click to expand...
Click to collapse
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also

matius44 said:
yes use PC Odin, flash the ROM and check if it solved..try couple of reboots also
Click to expand...
Click to collapse
his post is so complicated Oo
can u tell me what to download?

lol4it said:
his post is so complicated Oo
can u tell me what to download?
Click to expand...
Click to collapse
Sorry I did not do repartition before and I do not want to be responsible for any possible bricks..you can ask dr.ketan he knows about Odin better than me

[Q] Please help me with my Note GT-N7000 (I might have bricked it)

My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.

you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium

immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.

khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!

No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.

Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4

khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.

Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.

Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.

khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.

Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.

khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918

Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.

khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone

Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.

khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone

Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.

Just two options above, warranty or repartition.
Sent from my phone

[Q] help!!my i1890 is dead,reboot again and again

This device is strange.
first,I use odin to try to flash recovery.I can flash success,but always enter the 3e recovery..I tried lots of recovery version...and always can flash success ,and always enter the 3e recovery , It's can't enter my recovery.
and than I try to use ROM MANAGER to flash CWM RECOVERY. It's success to flash and it's can enter.
And than I use this CWM RECOVERY to flash a "DMod V6" ROM(http://forum.xda-developers.com/showthread.php?t=2165575)
...And than ..after finish and reboot,the trobble is coming.....
can not enter system , always show "Samsung Galaxy S III mini", and reboot,it's reboot again and again.
I try to use odin to flash a original rom and it's not useful , it'is always reboot again and again.
I try to use samsung kies to fix it , but not useful.
I try to flash PARAM_I8190.tar.md5 and PARAM.tar , it's not useful.
I try to flash a pit file to repartition but it cannot flash into device:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now , I can enter odin mode and CWM RECOVERY.
What can I do ? What should I do ?
Thanks!

and than I flash "cm10.1_golden.maclaw.20130712.zip"(bbs.gfan.com/forum.php?mod=viewthread&tid=6366912&extra=page%3D1)
It's can enter system.but i saw it not IMEI .
so i try to flash "GT-I8190_modem.bin-XXAMG1-update.zip"(bbs.gfan.com/forum.php?mod=viewthread&tid=6120250&extra=page%3D1)
and now ...It reboot and reboot again ...
I try to flash back to cm10.1 ...it's not useful...
..:crying::crying: what is the matter?
Now I also can enter CWM RECOVERY and odin mode

Try factory reset /wipe data then flash stock
Sent from my GT-I8190 using xda app-developers app

serophia said:
Try factory reset /wipe data then flash stock
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I done everything I can do .....
Someone flash a new rom it's can enter system but cant enter desktop , it's can wipe data to fix ..
but now I cant enter system......

Try to flash stock rom via odin, but i don't know how bad a missing IMEI is, don't know if it comes back..

No IMEI means no RIL no calls, no messages, no 3G network...
The only way to get it back is to take it back to Sammy's, but first try in any way you can to flash the original Samsung's ROM.

tux95 said:
Try to flash stock rom via odin, but i don't know how bad a missing IMEI is, don't know if it comes back..
Click to expand...
Click to collapse
I tried many many stock rom via odin...but all is not useful...it is still reboot again and again......
and now it's still can enter CWM RECOVERY and odin and can flash.
I think can use "dd if" backup a normal i8190 /dev/block/xxxx and use CWM RECOVERY to flash to my dead i1890.
It's can do ?

A few days ago my phone was on an endless boot loop.
Nothing worked (stock or custom rom) until someone suggested "La Fleur", a russian firmware from this post: Link

slowdyve said:
A few days ago my phone was on an endless boot loop.
Nothing worked (stock or custom rom) until someone suggested "La Fleur", a russian firmware from this post: Link
Click to expand...
Click to collapse
On thanks! It's may useful...but I have sent the phone back to the store...

thakns for this thread,im planning to flash my S3 mini with CM11 right now hope wont be needing this