Database Develop

[Q] Help can't access usb mode or adb sideload

I went to update my htc one AT&T (stock rom 4.2) to a custom rom (android revolution hd ver51) but when it it finished it was stuck on a loop. so I went to twrp (2.5) and cleared the cache but that didn't work. I wiped everything including my backup. now i can only go from bootloader to twrp. I tried to get into fastboot usb mode my pc won't recognize the device. I then tried to sideload adb via twrp and again won't recognize by the pc. I uninstalled the drivers restarted my computer tried many different cables and every pc port i had and still get nothing. I tried using a flash drive and an otg cable but again fail to recognize the device. I reinstalled the sdk and sync manager tried older drivers the newest driver and still nothing. I tried ruu but bootloader won't let me lock sim (sd int fail) Any help would be appreciated. I'm running out of options. Thanks

Tengen_Horder said:
I went to update my htc one (stock rom 4.2) to a custom rom (android revolution hd ver51) but when it it finished it was stuck on a loop. so I went to twrp (2.5) and cleared the cache but that didn't work. I wiped everything including my backup. now i can only go from bootloader to twrp. I tried to get into fastboot usb mode my pc won't recognize the device. I then tried to sideload adb via twrp and again won't recognize by the pc. I uninstalled the drivers restarted my computer tried many different cables and every pc port i had and still get nothing. I tried using a flash drive and an otg cable but again fail to recognize the device. I reinstalled the sdk and sync manager tried older drivers the newest driver and still nothing. Any help would be appreciated. I'm running out of options. Thanks
Click to expand...
Click to collapse
1- if you have an m7_u/ul model then you need TWRP 2.6.3.3 or higher as mentioned in the OP, this guys had the same problem: http://forum.xda-developers.com/showthread.php?t=2728415
2- if adb doesn't see your phone in recovery, please check FAQ#2 in my guide (you can disregard the guide only check the FAQ section)

nkk71 said:
1- if you have an m7_u/ul model then you need TWRP 2.6.3.3 or higher as mentioned in the OP, this guys had the same problem: http://forum.xda-developers.com/showthread.php?t=2728415
2- if adb doesn't see your phone in recovery, please check FAQ#2 in my guide (you can disregard the guide only check the FAQ section)
Click to expand...
Click to collapse
My device is not showing up in device manager how can I update to the latest twrp

Tengen_Horder said:
My device is not showing up in device manager how can I update to the latest twrp
Click to expand...
Click to collapse
Follow this guide to be sure your drivers are installed correctly:
originally from @nkk71: [GUIDE] [02-MAR-2014] nkk71's SuperGUIDE to returning 100% back to stock
2) Q: I'm using Windows 7 what should I worry about
A: when you issue the command "fastboot boot CWM.img" (now only in CWM/TWRP restore method) there's a high chance drivers won't correctly install
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
follow the below instructions to fix
Open "Device Manager" -> select the unknown "One" -> right-click -> "Update Driver Software ..." -> "Browse my computer" -> "Let me pick" -> "Android USB Devices" -> select "My HTC ..." -> install that
just in case, HTC Drivers can be found here: [Drivers] HTC Drivers for Windows - Several Versions (credits to @mdmower)
though you should already have them since you have been using your phone anyways​
for those who like a visual guide:
okay so I did a fastboot boot command, and as you can see it didnt install correct driver
Open "Device Manager"
there's the culprit
right click and Update Driver Software
select Browse my computer for driver software
select Let me pick from a list of device drivers on my computer
select Android USB Devices
select My HTC ... (if you have more than one version, choose the latest)
warning, select Yes
successful installation
now it looks better
and can confirm:
Code:
C:\ADB3>[B]adb devices[/B]
List of devices attached
HTxxxxxxxxxx recovery
-------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse

alray said:
Follow this guide to be sure your drivers are installed correctly:
Click to expand...
Click to collapse
I tried your directions but windows is not detecting the one when i try to plug it in. I don't see it in the device manager. I uninstalled all drives for it and when I plugged it back the phone does nothing. is the device detectable in bootloader or twrp I don't have an os so I cannot go into usb host mode or dev mode.

Tengen_Horder said:
I tried your directions but windows is not detecting the one when i try to plug it in. I don't see it in the device manager. I uninstalled all drives for it and when I plugged it back the phone does nothing. is the device detectable in bootloader or twrp I don't have an os so I cannot go into usb host mode or dev mode.
Click to expand...
Click to collapse
you should be able to use fastboot commands from bootloader and adb commands from twrp. Try using another usb port and another cable.

Tengen_Horder said:
I tried your directions but windows is not detecting the one when i try to plug it in. I don't see it in the device manager. I uninstalled all drives for it and when I plugged it back the phone does nothing. is the device detectable in bootloader or twrp I don't have an os so I cannot go into usb host mode or dev mode.
Click to expand...
Click to collapse
Uninstall everything that starts with "HTC ....", then install latest drivers from http://forum.xda-developers.com/showthread.php?t=2089508
plug your phone in, what does it get recognized as? It has to be recognized as something, otherwise it's not connected (possibly bad USB port on PC/phone).

alray said:
Follow this guide to be sure your drivers are installed correctly:
Click to expand...
Click to collapse
nkk71 said:
Uninstall everything that starts with "HTC ....", then install latest drivers from http://forum.xda-developers.com/showthread.php?t=2089508
plug your phone in, what does it get recognized as? It has to be recognized as something, otherwise it's not connected (possibly bad USB port on PC/phone).
Click to expand...
Click to collapse
After several different computers, different cords and every port on my pc I'm guessing the usb port on the phone is corrupted. I'm not sure this is fixable but any help would be appreciated.

Tengen_Horder said:
After several different computers, different cords and every port on my pc I'm guessing the usb port on the phone is corrupted. I'm not sure this is fixable but any help would be appreciated.
Click to expand...
Click to collapse
Well if nothing is showing up in Windows Device Manager, then the port is damaged and not fixable via software.... try opening Device Manager, then plug in the phone.... does Device Manager screen "refresh"?

nkk71 said:
Well if nothing is showing up in Windows Device Manager, then the port is damaged and not fixable via software.... try opening Device Manager, then plug in the phone.... does Device Manager screen "refresh"?
Click to expand...
Click to collapse
No it doesn't.

guys i need some help, i wiped my device but formated system and data, dont have access to mount usb because dont work, in adb sideload my device is not reconized when type adb devices in prompt.
so i think it´s a soft brick because i have access to fastboot and recovery, but device cant be reconized in sideload and cant access usb
my device is s-on

marken said:
guys i need some help, i wiped my device but formated system and data, dont have access to mount usb because dont work, in adb sideload my device is not reconized when type adb devices in prompt.
so i think it´s a soft brick because i have access to fastboot and recovery, but device cant be reconized in sideload and cant access usb
my device is s-on
Click to expand...
Click to collapse
If you can get into fastboot and recovery then the issue is most likely the drivers on your computer. Start there. You may end up flashing an ruu and starting from scratch. I take it you didnt make a backup first like it is advised?

zelendel said:
If you can get into fastboot and recovery then the issue is most likely the drivers on your computer. Start there. You may end up flashing an ruu and starting from scratch. I take it you didnt make a backup first like it is advised?
Click to expand...
Click to collapse
yes i did but it is on my pc and i formated internal storage :silly:
can i flash ruu s-on? how?

marken said:
yes i did but it is on my pc and i formated internal storage :silly:
can i flash ruu s-on? how?
Click to expand...
Click to collapse
Always keep a backup on your device. On your PC is pointless to be honest. To be honest I think you can but I dont know as I have been S-off and super CID since the day I got it as I cant stand what Sense has turned into.

zelendel said:
Always keep a backup on your device. On your PC is pointless to be honest. To be honest I think you can but I dont know as I have been S-off and super CID since the day I got it as I cant stand what Sense has turned into.
Click to expand...
Click to collapse
do you think an OTG cable works? it´s my last hope and ill try to purchase one if nothing works

marken said:
do you think an OTG cable works? it´s my last hope and ill try to purchase one if nothing works
Click to expand...
Click to collapse
To be honest I have no idea. I have no use for OTG so never bothered to use it. Cant even say it works on my device or any rom I have ever used.

marken said:
do you think an OTG cable works? it´s my last hope and ill try to purchase one if nothing works
Click to expand...
Click to collapse
take a look at the FAQ sticky thread, last post (page 3), see if that helps

nkk71 said:
take a look at the FAQ sticky thread, last post (page 3), see if that helps
Click to expand...
Click to collapse
now my oc recognizes my device, i just installed universal adb from koush and list my device in adb but every time i try to do a command give me the message error: closed

marken said:
now my oc recognizes my device, i just installed universal adb from koush and list my device in adb but every time i try to do a command give me the message error: closed
Click to expand...
Click to collapse
adb lists your device in sideload mode, so you need to sideload the rom
if you want to push the rom, you need to exit sideload mode, and be in normal recovery mode

nkk71 said:
adb lists your device in sideload mode, so you need to sideload the rom
if you want to push the rom, you need to exit sideload mode, and be in normal recovery mode
Click to expand...
Click to collapse
thanks, but when i type adb usb usb mode but nothing happen will try to push
everytime i try sideload command my pc freezes and i need to unplug from the wall

xperia SP dead! please help

1- i have a xperia SP and i connect to charger!
2- after 1 minutes phone power off automatic & showing a picture like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i want to flash a stock rom with flashtools, but flash tools cant flash it!
flashtools only know phone in fastboot mode correctly!
but in flashmode there is a unknow problem!
i can't boot device & can't flash it! flashtools & other ways can't flash it! i don't know for what!
but flashtools can't connect correctly to device!
i test it in other PC but no any change happend!
i know there is a problem with flashmode, but i don't know what is it!
driver install correctly & i know what i doing
so please don't say basic work
thanks for any help

Try Sony Update Service. Download from their website, install and try

i try it but even don't know phone when connect it in flashmode!

Start up Sony Update Service, select your phone and follow the stepps. At one point you'll see this pic:
Remove the backcover. If you look closely you'll see a tiny yellow button.. Use a pen or paperclip to push and hold it for a few second to turn it off (will take some time and patience because our phone has its own will xD and will boot up again) Plug in cable into phone and into pc and press volume down untill you see a green light. This indicates flashmode.
If it goes well the programm should start doing its download and flash work

the green light is showing but Sony Update Service don't start flashing & it remaining in your screenshot stat!

Got a picture for me?
On second thought:
You got flashtool installed? (and thus the drivers located in C:\Flashtool\drivers?)

picture is like post 4#
yes i install it & drivers

I mean of your phone? I mean if the phone is connected into flashmode it should work.. So I dont understand why it wont work...

@amir_n71, did you download a firmware to use with Flashtool?

yes i download

And tried ofcourse...
Prior issue now is we need to get the phone into working flashmode so that Flashtool or Sony Update Center can reflash the Firmware...

Just to be sure, did you:
a. Check if your battery had enough juice left for flashing and, if not, tried to recharge it,
b. Try to enter recovery by powering on the phone while holding Volume Down button (if you had a recovery previously installed),
c. Use a Windows computer,
d. Exit and kill any running ADB processes (Sony Update Service and PC Companion included) before trying to flash with Flasthool?
and then:
1. Power off the phone (using side power button OR by pressing the Off button under the battery cover),
2. Download latest Flashtool,
3. Install FT AND flashmode and fastboot drivers,
4. Download a suitable official firmware in a form of a .FTF file (full firmware, not just a kernel),
5. Copy that firmware to the "firmwares" folder in FT's install directory,
6. Start FT, click on a "lightning" icon, wait for the proram to finish its thing, select the firmware you downloaded, click on "Flash", connect the phone to a USB port while powered off and holding Volume Down button until FT started the flashing process?

Is that a xperia sp?
Sent from my C5303 using XDA Free mobile app

No a Xperia with same issue as op he used it as picture to show his issue
Sent because I pressed enter

yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information

amir_n71 said:
yes it is xperia sp
i use any way but i don't know for what can't flash it
in flashtools when i connect device must say a xperia sp connected and model nomber is c5302
but flashtools not say xperia sp & worng model number is showing
look at this :
flashing started but waiting in this state : Reading device information
Click to expand...
Click to collapse
Just disconnect and reconnect. I got that a lot with my Xperia ray
Verstuurd vanaf mijn C5303 met Tapatalk

i tried but no answering!

ADB drivers: None
Fastboot Drivers: None
I suggest you reinstall Flashtool. It misses some drivers. (perhaps the cause?)
And also update Flashtool... See their thread and website

i installed latest version from flashtools website!

Now install fastboot and flashmode drivers that came with Flashtool. Open "drivers" folder, run that single EXE file, select fastboot and flashmode from the list and install them.
And be careful to run the correct version of Flashtool on your system! Run "flashtool64.exe" on a 64bit Windows, and "flashtool.exe" if you have a 32bit Windows OS.

[Q] Problems with unlocking bootloader for Sony Xpera SP

I'm having problems unlocking the bootlaoder for my Sony Xpera SP.
The part I'm getting stuck at is where I'm supposed to connect my phone in fastboot mode to the PC.
I've tried installing a bunch of drivers everywhere, followed guides and stuff, but whatever I do, I can't get the phone in proper fastboot mode.
The flashtool says:
"Drivers need to be installed for connected device.
You can find them in the drivers folder of Flashtool."
First off, I can't even find the drivers for Sony Xperia SP, but there are tons for the S and P versions.
But when I try installing those drivers it still doesn't work.
I just want to install CM 11 on it, though I never thought it would be this much work.. I've been trying to fix this for over 5 hours already.
It would be really nice if anyone could help me through this.

xpopy said:
I'm having problems unlocking the bootlaoder for my Sony Xpera SP.
The part I'm getting stuck at is where I'm supposed to connect my phone in fastboot mode to the PC.
I've tried installing a bunch of drivers everywhere, followed guides and stuff, but whatever I do, I can't get the phone in proper fastboot mode.
The flashtool says:
"Drivers need to be installed for connected device.
You can find them in the drivers folder of Flashtool."
First off, I can't even find the drivers for Sony Xperia SP, but there are tons for the S and P versions.
But when I try installing those drivers it still doesn't work.
I just want to install CM 11 on it, though I never thought it would be this much work.. I've been trying to fix this for over 5 hours already.
It would be really nice if anyone could help me through this.
Click to expand...
Click to collapse
You'll need to run the installer located within Flashtool install directory. It seems you are currently run Windows. Assuming you did not change the install path, you can find Flashtool in the root of your local hard disk. Navigate to C:\Flashtool\drivers and then execute the installer there in. Tick "Flashmode drivers" and "Fastboot drivers" cause obviously you'll require it. Scroll down a bit and tick "Common drivers for Viskan board". This will install proper flash drivers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Afterwards for the exclusive driver for your SP (I am assuming you're on stock), Open PC Companion (install it if you don't have it) then connect your Xperia SP with your cable. This will install the drivers for your SP. If you have done this before, you actually already have the drivers installed.
Note that if above methods are well executed by you, you'll find out on the first connect, flashtool will detect the phone partially and somehow later it disconnects. Don't worry, somehow through this process your computer might be installing additional drivers. Retry to connect your Xperia SP.
Above all, do note that in order to unlock the bootloader, you'll need to connect your phone in flashmode. To do so, when prompted, while the phone in its powered down state, hold the volume down button then connect the cable to your phone.

Thanks a lot!
I'm not sure what the problem was, but over the night + installing PC Companion fixed it. Finally CM 11 is mine

xpopy said:
Thanks a lot!
I'm not sure what the problem was, but over the night + installing PC Companion fixed it. Finally CM 11 is mine
Click to expand...
Click to collapse
Glad it worked out for you

device starts charging immediately after entering fastboot mode.
TechnoSparks said:
You'll need to run the installer located within Flashtool install directory. It seems you are currently run Windows. Assuming you did not change the install path, you can find Flashtool in the root of your local hard disk. Navigate to C:\Flashtool\drivers and then execute the installer there in. Tick "Flashmode drivers" and "Fastboot drivers" cause obviously you'll require it. Scroll down a bit and tick "Common drivers for Viskan board". This will install proper flash drivers.
Afterwards for the exclusive driver for your SP (I am assuming you're on stock), Open PC Companion (install it if you don't have it) then connect your Xperia SP with your cable. This will install the drivers for your SP. If you have done this before, you actually already have the drivers installed.
Note that if above methods are well executed by you, you'll find out on the first connect, flashtool will detect the phone partially and somehow later it disconnects. Don't worry, somehow through this process your computer might be installing additional drivers. Retry to connect your Xperia SP.
Above all, do note that in order to unlock the bootloader, you'll need to connect your phone in flashmode. To do so, when prompted, while the phone in its powered down state, hold the volume down button then connect the cable to your phone.
Click to expand...
Click to collapse
once i enter the fastboot mode by pressing vol up key, it shows blue light and after some 5secs it starts charging. how to solve this?

[OP7PRO][LATEST OOS 9.5.10 GM31CB] Newest version of T-Mobile MSM tool

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
This MSM tool is only meant for T-Mobile version of OnePlus 7 Pro.
The previous MSM tool shared by @slayerh4x in his thread restore to OOS 9.5.5 while the one I will share in this thread will restore your device to OOS 9.5.9/9.5.10 .
You can download 9.5.9 tool here and 9.5.10 tool here.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device

FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsoft...f-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
My device doesn't stay in EDL mode for more than 10 seconds
Some units can have this problem and there isn't a lot of things to do to fix that, except being fast after plugging your phone to your computer.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.

Reserved

Credits:
@Titokhan for inspiration in writing
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost a few months ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS

Added 9.5.10 GM31CB unbrick tool

I used the 9.5.5 MDM tool and it worked fine. Then I got the OTAs for the updates from T-Mobile almost immediately. I believe it was 2 of them.
Thanks for putting this out there! I'll swap it out with the other tool.

Mine just stays asaram pre-processing, and it shows the right device in device mgr. I am on9.5.10 but wanted to go to the international version too. Oh well... Is there a way to check that the phone is in EDL mode?

T-Mobile variant, get stuck at Param preload. Device Manager shows Qualcomm HS-USB QDLoader 9008. See screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, am I missing something or is there no download for the driver OP linked in FAQ?

bobbarker2 said:
T-Mobile variant, get stuck at Param preload. Device Manager shows Qualcomm HS-USB QDLoader 9008. See screenshot below.
Also, am I missing something or is there no download for the driver OP linked in FAQ?
Click to expand...
Click to collapse
Fixed download link in FAQ (source https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )
Try removing any previous Qualcomm drivers and use the one I linked

CountryEd said:
Mine just stays asaram pre-processing, and it shows the right device in device mgr. I am on9.5.10 but wanted to go to the international version too. Oh well... Is there a way to check that the phone is in EDL mode?
Click to expand...
Click to collapse
Same as above, try using the Qualcomm drivers I linked in FAQ.
The way to check your device is in EDL mode is by looking at COM ports section in your device manager and search for "QDLOADER 9008" or "QHUSB_BULK" mentions.

Should we be able to extract a boot.img from this? Would love to be able to root the stock firmware.
Sent from my GM1915 using Tapatalk

Some_Random_Username said:
Fixed download link in FAQ (source https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )
Try removing any previous Qualcomm drivers and use the one I linked
Click to expand...
Click to collapse
Which driver? I see multiple drivers that apply to win10

Ok so the download you linked turned my computer from recognizing it QDLoader 9008 to Qualcomm HS-USB Diagnostics 900E. Whats wrong with the L2 Drivers from other threads?

Well thanks for the share I guess. Now I have to figure out how to get rid of the drivers you provided (Uninstall Driver doesn't remove them and cant update manually with L2 Drivers from other threads).

bobbarker2 said:
Ok so the download you linked turned my computer from recognizing it QDLoader 9008 to Qualcomm HS-USB Diagnostics 900E. Whats wrong with the L2 Drivers from other threads?
Click to expand...
Click to collapse
The L2 drivers from other threads can be outdated or not work for some persons, hence why I recommend the one present on Windows Update website (odd they didn't work for you though ...)
bobbarker2 said:
Well thanks for the share I guess. Now I have to figure out how to get rid of the drivers you provided (Uninstall Driver doesn't remove them and cant update manually with L2 Drivers from other threads).
Click to expand...
Click to collapse
Damn, really?
It should normally go away after right clicking on them, selecting Uninstall device and ticking "delete the driver software for this device"

mjdavis871 said:
Should we be able to extract a boot.img from this? Would love to be able to root the stock firmware.
Click to expand...
Click to collapse
I doubt it is possible to extract it from the OPS file itself.
There is however a hidden readback mode which should allow you to extract it from your device running T-Mo software

Some_Random_Username said:
I doubt it is possible to extract it from the OPS file itself.
There is however a hidden readback mode which should allow you to extract it from your device running T-Mo software
Click to expand...
Click to collapse
Where can I find info on that?
Sent from my GM1915 using Tapatalk

mjdavis871 said:
Where can I find info on that?
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
Press F8 while in tool, select the partitions you want to readback, input "oneplus" as password, press "ok" and click on Readback button.
Partitions you selected will be saved to the root of your system drive.
Note also that your device won't reboot automatically to OOS after a readback contrarily to upgrade mode, you will need to use power button to turn it back on.
Source https://forum.xda-developers.com/showpost.php?p=78226654&postcount=88

Some_Random_Username said:
The L2 drivers from other threads can be outdated or not work for some persons, hence why I recommend the one present on Windows Update website (odd they didn't work for you though ...)
Damn, really?
It should normally go away after right clicking on them, selecting Uninstall device and ticking "delete the driver software for this device"
Click to expand...
Click to collapse
I've done this countless times and that didn't work but i figured out a work around. So I got it back the QBLoader device but the driver version is 2.1.2.0. Can't seem to find 2.1.2.2 anywhere.

I'm really thankful you put this together for us, and the FAQ after the OP has some info in it I needed but hadn't seen anywhere else.
On the other hand, I may never get to see your work. I'm looking at a 12 hour download from Android File Host. I hope I don't need to reboot my laptop before tomorrow.

Fake Android 10" Phone TS-M704A -ZML10

Hi guys I am new to Android as you can see otherwise I wouldn't have touched one of these fake tablets at all , but the price looked good and it was for a Christmas gift to a child who would most likely drop it on the first day so took a chance. BIG mistake it wouldnt accept Family link or any decent Child security apps so it was basically useless , I watched a video on how to upgrade it and to check what system was installed it was supposed to be Android 9 it was in fact KitKat 4.4.2 so I followed the video ( to the letter ) and now it only loops the android logo . I can't find any firmware for it and am not even sure what manufacturer has the cheek to put their or it's brand to it , but I have persevered and not yet thrown it against the wall ( but i'm frikin close to it ) so please can anyone point me in the right direction to unbrick this Marvel of a Chinese Puzzle ( honestly it makes a Rubik Cube look easy ) I would be eternally grateful as would my wife who didnt know I knew so many swear words as I am 68 she should have known I had a few up my sleave lol so looking for a MTK6582 scatter file and firmware for a TS-M704A (10" model ) board marked as ZLM10 Thanks guys .

hi, i am not much of a expert but it seems you have messed up something wrong in the tablet.
i would need some information about tablet to help you.
1) is it still on stock rom?
2) can you go to recovery mode just by pressing power button simultaneously with either volume up or volume down button
3) it any thing shown in pc (windows) inside control panel when tablet is connected with usb.

Hi Bhanu no nothing visible on tablet no access to any system , when conected to PC MTK port shows on com15 but the tablet does not show in My Pc as a mass storage or anything. If I plug in aniother tablet I have it shows up on my pc , but with this one nothing at all . The board is a ZL10-MB V3.2 Arm cortex 7 cpu and I think its an MTK MT6582 but not sure but that is what most specs say for this tablet . When SP-Flash plugged in it says no partion and times out , only firmware I have ben able to find fot it off Leaktite is corrupted plus the logo is no longer looping it's a brick .. Regards Clive

clives40 said:
Hi Bhanu no nothing visible on tablet no access to any system , when conected to PC MTK port shows on com15 but the tablet does not show in My Pc as a mass storage or anything. If I plug in aniother tablet I have it shows up on my pc , but with this one nothing at all . The board is a ZL10-MB V3.2 Arm cortex 7 cpu and I think its an MTK MT6582 but not sure but that is what most specs say for this tablet . When SP-Flash plugged in it says no partion and times out , only firmware I have ben able to find fot it off Leaktite is corrupted plus the logo is no longer looping it's a brick .. Regards Clive
Click to expand...
Click to collapse
Hi, clives good news after searching for hours on russian forms i found your tables frimware just made for your tablet so
first thing to do is install mtk device drivers/ flash tool driver in to your computer
secondly download SP_Flash_Tool_v5.1636_Win i recommend this version because it works without error
thirdly download the frimware of your phone from link https://androidhost.ru/2CKf
fourthly remove battery to make sure phone is switch of
finaly connect good usb cable to tablet and loadup sp flash tool flash frimware and abra ka dabra your tablet is working again
and ya be happy.

to add extra help here are website for drives
1) mtk drivers
Download MTK USB All Drivers for Windows (Official MediaTek Drivers)
Download the latest version of MTK USB All Drivers (MediaTek Driver) to connect any MediaTek Device with the Windows Computer.
androidmtk.com
note:- if you are using windows 10 then there would be problem with installing drivers as these are not updated for it so what you need to do is
go to settings in windows 10
and go to update and security
then select recovery tab
then click advanced restart option. as seen in image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then you pc will restart and when start it will show advanced recovery option where you need to select
then select startup settings as seen in image
then select option 7 disable driver signature enforcement
then proceed to start windows
the process is bit lengthy but believe me it worth it .
after this you need to extract driver pack downloaded from link https://androidmtk.com/download-mtk-usb-all-drivers
then open folder vcom drivers
you will see a file name mtk_sp_usb2ser.inf just right click on it to install it manually
after all this just download spflash tool from link bellow do not use any other version
SP Flash Tool v5.1636 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.1636 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
after it just download the frimware from the link
https://androidhost.ru/2CKf
extract it and use spflash tool to flash the rom.
if it work do not say thanks just do some thing good for any other person who need help.

Bhanu8082 said:
to add extra help here are website for drives
1) mtk drivers
Download MTK USB All Drivers for Windows (Official MediaTek Drivers)
Download the latest version of MTK USB All Drivers (MediaTek Driver) to connect any MediaTek Device with the Windows Computer.
androidmtk.com
note:- if you are using windows 10 then there would be problem with installing drivers as these are not updated for it so what you need to do is
go to settings in windows 10
and go to update and security
then select recovery tab
then click advanced restart option. as seen in image
View attachment 5199127
then you pc will restart and when start it will show advanced recovery option where you need to select
View attachment 5199129
then select startup settings as seen in image
View attachment 5199133
then select option 7 disable driver signature enforcement
then proceed to start windows
the process is bit lengthy but believe me it worth it .
after this you need to extract driver pack downloaded from link https://androidmtk.com/download-mtk-usb-all-drivers
then open folder vcom drivers
you will see a file name mtk_sp_usb2ser.inf just right click on it to install it manually
after all this just download spflash tool from link bellow do not use any other version
SP Flash Tool v5.1636 for Windows - MediaTek Flash Tool
Download SP Flash Tool v5.1636 to flash or install Stock Firmware ROM (Flash File) on the devices powered by Mediatek Chipset.
spflashtools.com
after it just download the frimware from the link
https://androidhost.ru/2CKf
extract it and use spflash tool to flash the rom.
if it work do not say thanks just do some thing good for any other person who need help.
Click to expand...
Click to collapse
Hi Bhanu no luck I'm afraid the sp comes back with the message time out , computer is detecting and stable so now I'm completely lost. but thanks for trying to help regards Clive.

are you sure giving up so early ????
if decided to try once again, check if pc detects phone or not
how?
simple,
connect your phone and open control panel go to device manager and see if there is any vcom driver connected or not

Hi Bhanu yes the tablet does show up in the device manager and isn't jumping in and out so no interupt to connection , it just keeps timing out when plugged back in to pc on download from Flashtool. I am thinking maybe the sd is locked or damaged I don't know , been reading up a bit on these and many have had the same problems with this model just basically a load of junk lol but if you have any ideas I will more than gladly try them .regards Clive

yes you are right when i searched for your phone i found that flash drive is missing in it so tablet will not work now.
but you can try resetting it through recovery if not then its just useless.

Yeah but the only way you can do that with these phones/tablet/ dung pile lol is to have ad debugging which without a system in it you're screwed ? so I think I'm going to use it as a Frisbee ha ha . whatever you do do not buy any tablets from a company called well 4 shopping UK . Not only are they not in the UK so delivery times are ridiculous but they lie through their teeth , I suppose my own fault for buying from ebay lol thanks anyway Bhana
your help was much appreciated regards Clive PS if I ever do crack it I will let you know ..
​