Galaxy S i9000 No IMEI / No Network - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello guys, I have a device with no EFS Backup. Baseband says "Unknown" and *#06# brings up just empty popup with OK button.
I have read a lot of threads about this problem, a lot of ways to fix it, but none of them worked for me.
I'm not trying to restore my IMEI, I just want to make network available, even with the generic IMEI (My Carrier doesn't have any problems with that)
Right now I'm on stock rooted 2.3.6 and waiting for help.

archildroid said:
Hello guys, I have a device with no EFS Backup. Baseband says "Unknown" and *#06# brings up just emty popup with OK button.
I have read a lot of threads about this problem, a lot of ways to fix it, but none of the worked for me.
I'm not trying to restore my IMEI, I just want to make network available, even with the generic IMEI (My Carrier doesn't have any problems with that)
Right now I'm on stock rooted 2.3.6 and waiting for help.
Click to expand...
Click to collapse
Network is not there because of the IMEI. Ideally, IMEI should not have been wiped as you are on stock. But anyways, flash to original STOCK ROM should i get fixed...just follow the link:
- Flashing To Original Rom - Using Odin on GT-i9000
- Flashing To Original Rom - Using Heimdall on GT-i9000

gopalasubramanium said:
Network is not there because of the IMEI. Ideally, IMEI should not have been wiped as you are on stock. But anyways, flash to original STOCK ROM should i get fixed...just follow the link:
- Flashing To Original Rom - Using Odin on GT-i9000
- Flashing To Original Rom - Using Heimdall on GT-i9000
Click to expand...
Click to collapse
hello and thanks for replying.
I tried flashing several stock roms on 2.2.1 and 2.3.6 but it didn't fix my issue (

Guys, I really need your suggestions.
I'm stuck with no signal ((

happened to me today too. i flashed semaphore jb then i flashed voodoo then
i flashed speedmod for the sake of testing it. now i have no imei and signal.
please help us asap. thanks.
EDIT:
hey i found a solution. i was able to restore my imei and mobile signal.
HERE.

Cedi0117 said:
happened to me today too. i flashed semaphore jb then i flashed voodoo then
i flashed speedmod for the sake of testing it. now i have no imei and signal.
please help us asap. thanks.
EDIT:
hey i found a solution. i was able to restore my imei and mobile signal.
HERE.
Click to expand...
Click to collapse
Thanks, I'll try it as soon as I get home and reply here.
Hope it will help.

I've been trying to solve my mum's i9000 out - I have an IMEI but it isn't the same one - EFS folder is empty. Tried everything I know. Still no luck :/

archildroid said:
Hello and thanks for the link. Please, can you tell me what steps did you exactly take? step-by-step.
Thanks in advance
Click to expand...
Click to collapse
I just flashed the three files in odin, the PDA, PHONE and CSC in the link i gave you.
LINK
Necessary files :
ODIN 1.85
ODINFILES
1.go to download mode on your phone. open up odin before you plug in your phone.
2.Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
3.Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
4.Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
5.Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
(don't tick re-partition and flash lock)
When you have all the files needed in ODIN
6.Click Start let it Run.
it will boot up and open recovery and if it has red errors (the dbdata one)
just flash this file as PDA and don't tick re-partition and flash lock. Otherwise, skip these steps.
DBDATA.RFS
To root your device again, just flash this file: LINK (or this file can be found in the OdinFiles.zip). Flash this file as PDA again.
after doing so, my problem regarding missing imei and mobile network were gone.
however, i do recommend reading the thread if you weren't able to understand some things or whatnot.
CREDITS:
EwOkie's thread.
Source:
experience this morning lol
hope i could be of assistance.
Regards,
Ken

Great reply +thank'ed.
I haven't tried JVU yet, but I've tried quite a lot of other GB stock roms.
I'll give that a go now.
EDIT:
Did that and it came with "confirm password" error!

what do you mean password error? i haven't experienced an error like that
Sent from my GT-I9000 using xda premium

Cedi0117 said:
what do you mean password error? i haven't experienced an error like that
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
The photo is linked.
Don't worry nothing to do with the IMEI problem.

Cedi0117 said:
happened to me today too. i flashed semaphore jb then i flashed voodoo then
i flashed speedmod for the sake of testing it. now i have no imei and signal.
please help us asap. thanks.
EDIT:
hey i found a solution. i was able to restore my imei and mobile signal.
HERE.
Click to expand...
Click to collapse
I flashed the ROM medntioned in the link, but after succesfull flashing with odin and reboot I recieve error:
E:failed to mount /efs (invalid argument)
E:failed to mount /efs (invalid argument)
E:check_selective_file:Can't mount /efs

archildroid said:
I flashed the ROM medntioned in the link, but after succesfull flashing with odin and reboot I recieve error:
E:failed to mount /efs (invalid argument)
E:failed to mount /efs (invalid argument)
E:check_selective_file:Can't mount /efs
Click to expand...
Click to collapse
Sorry about that error. i forgot to mention it.
Download this file : LINK
Flash it under .PIT and tick re-partition together with the PDA, PHONE and CSC.
Tell me if it works.
Regards,
Ken

Cedi0117 said:
Sorry about that error. i forgot to mention it.
Download this file : LINK
Flash it under .PIT and tick re-partition together with the PDA, PHONE and CSC.
Tell me if it works.
Regards,
Ken
Click to expand...
Click to collapse
flashing right now. will reply soon
=====
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
result - same error. flashing again
=====
re-flashed - same error (

archildroid said:
flashing right now. will reply soon
=====
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> Sbl.bin
<ID:0/008> param.lfs
<ID:0/008> factoryfs.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> cache.rfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response form LOKE
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
result - same error. flashing again
=====
re-flashed - same error (
Click to expand...
Click to collapse
Sorry about this mess. i'm trying to find solutions for your problem as i wasn't able to encounter it.
Did you by chance ticked on "Phone EFS Clear" ?

Or try flashing another stock rom - after factory resetting in recovery and pulling the battery.

flashed stock froyo - up and running.
No IMEI, No Baseband
==
I rooted it, and when I checked efs folder - it was empty, only .android folder.
I tried to insert another galaxy s efs files (thanks to Cedi0117 for providing them) - set proper permissions with root explorer, restarted - efs is empty again.

archildroid said:
flashed stock froyo - up and running.
No IMEI, No Baseband
==
I rooted it, and when I checked efs folder - it was empty, only .android folder.
I tried to insert another galaxy s efs files (thanks to Cedi0117 for providing them) - set proper permissions with root explorer, restarted - efs is empty again.
Click to expand...
Click to collapse
Same here.
I've contacted samsung btw - I'm waiting for their reply.
I even told them I flashed via ODIN (warranty is over so nothing to lose)

There should be some way at least to get the generic IMEI.

TotallydubbedHD said:
Same here.
I've contacted samsung btw - I'm waiting for their reply.
I even told them I flashed via ODIN (warranty is over so nothing to lose)
Click to expand...
Click to collapse
Any news?

Related

[Q] anyone can help me to flash back my krean version rom?

HI,everyone,
i have an problem about my 'I9000' ,it is korean version and type code is
'SHW-M110S' in krean,
i flash the rom 'jh1' by the tools 'odin',
and select "re-partition",but now the function of mobile is failed,
i can not call and sent sms.
the IMIE code can not be query,display :unknown:,
now i want to flah the korean M110S ROM "DH9",use odin.exe
but always display failed
counld anyone tell me how to do?
if use odin can do,how to set the pararmeter?
if i need to the pit file?which one?if need to re-partition?and so on.
tks a lot
Start Odin, tick re-partition, select 512.pit (do not select PDA, Phone, CSC or anything else).
Put phone to download mode and connect to pc.
Once Odin finds your phone (the first ID window turns yellow and shows COM ID), click start.
It takes up to ten minutes until Odin finishes (Pass! text appears), and phone will turn off automatically.
In Odin, press reset button and untick re-partition.
Remove the battery and insert it again.
Put phone to download mode and connect to pc.
Select the M110S-NPS-IMAGE-REV03-DH09-2002-USER.tar archive as PDA and press start. After Odin completes your phone will be booted and restarted in Online mode automatically.
I know most people flash .pit file at the same time with the ROM itself, but this way is described in Samsung service manual so I personally do it this way.
If your IMEI is unknown sounds that you have wiped your efs folder.
This happens when you select clear efs in Odin.
tks very much
i followed the method to do
but
after 'Select the M110S-NPS-IMAGE-REV03-DH09-2002-USER.tar archive as PDA and press start.' the odin display failed when process :modem.bin;
can you help me again for this problem?
tks and hoghly appreciation
the odin's message as follows:
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.rfs
<ID:0/010> dbdata.rfs
<ID:0/010> factoryfs.rfs
<ID:0/010> modem.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
maybe try it again with 513.pit ?
did you select repartition on the 2nd try when you used the 512.pit ?
yes i am sure,and i have try the 513.pit.
have the same error
i want the pit file for korean version
where can i find it?
help!!!
seem me do u post rom this site may i can fix
sornvichian said:
seem me do u post rom this site may i can fix
Click to expand...
Click to collapse
tks
but the korean rom is about 300M
how can i post here?
i download it on here
http://www.mediafire.com/?sharekey=...c276fc89cb2aeee33b0a5e6fe9806c5747305ce783dac
this verson is DG14,
i also have DG23,and DH09,all failed.
have the same problem! its refusing to install via odin! any tips?
They have diffent hardware. Really dont flash it.
Its made for sk telecom and they have different way of sending sms and alsi korean galaxys has dmb
Sent from my GT-I9000 using XDA App
if you can read Chinese, you can try the below method
h ttp://bbs.gfan.com/viewthread.php?tid=259358&extra=&page=1

[Q] Black screen after reflash, SOLVED!

Hey guys bear with me because I am a little new to android but I pick up things relatively quick. I tried applying a morph theme to my newly rooted and lagfixed SGS and things went horribly wrong. On reboot it spammed force closes so I decided there was no option but to reflash. It is a Australian Virgin/Optus SGS and I found the closest firmware would be DTJG4, got it and ODIN and a PIT file (513) and attempted with no success. It flashes fine but then reboots into recovery with this message-
Update media, please wait ...
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
If I choose reboot, it will go past the welcome screen and then just black screen. I have also done a factory reset/wipe.
Any help at all would be very appreciated.
It seems i have made things worse now, I redownloaded the firmware from sams and this time odin wouldnt upload the firmware.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
is where it was stuck for about an hour so I disconnected the SGS and rebooted it and it is now semi bricked with only access to the download screen. Should i just return it to the shop and hope they replace it/fix it?
koukla said:
It seems i have made things worse now, I redownloaded the firmware from sams and this time odin wouldnt upload the firmware.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
is where it was stuck for about an hour so I disconnected the SGS and rebooted it and it is now semi bricked with only access to the download screen. Should i just return it to the shop and hope they replace it/fix it?
Click to expand...
Click to collapse
Try another usb port... It should pass that step pretty quickly (almost instant)
I also have this problem...after a search, I cannot find a solution.
Thank you dagrim1, changing usb port got it to wake up again. I also got my phone back up and running!! It seems the DTJG4 requires the 512 PIT file to repartition. I sure did get scared there but taking a step back and reassesing helped me sort that one out. Now back to theme testing!

Invalid Bootloader error. Phone stuck on bootloop

Hey guys. I have a peculiar problem with my friends Galaxy S. Yesterday, I tries to flash a Jelly Bean ROM from the forums. Straight from Gingerbread, I followed all the instructions to the line and finished flashing.
But sadly, the phone got stuck in a bootloop and is not booting right now. The three button combos aren't working - both download and recovery mode and I was pissed. Thankfully, I had a JIG with me (one I use with my Galaxy Note) and got my phone into download mode.
The problem now is that whenever I try to flash a stock ROM, it gets stuck at the boot.ini file and Odin says "Complete (Write) process failed". The phone (from inside downloaded mode) shows the text "Invalid Bootloader !!!" on the top.
I realize this is fixable but I just don't know what file to flash I am used to the Galaxy Note and the naming conventions and forum posts aren't quite clear to me. Can someone tell me what file I should be flashing to get the bootloader working again?
Thanks in advance!
Sent from my GT-N7000 using xda premium
gramessh said:
Can someone tell me what file I should be flashing to get the bootloader working again?
Click to expand...
Click to collapse
you can use any recovery kit from the My Androids Collections link below
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
gramessh said:
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
Click to expand...
Click to collapse
First remove battery, EXT SD card and SIM Card, press power for a few mins before reinserting battery to try
use the rescue kit with boot loader using heimdall or you can use those files with Odin too
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
gramessh said:
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
Click to expand...
Click to collapse
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
benhouli said:
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
Click to expand...
Click to collapse
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
xsenman said:
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
Click to expand...
Click to collapse
already did , but i get message heimdall not installed , do u what to install now ?
i say yes
but even i am with windows xp and with admim permissions
it say i need admin permissions and need to do run as admin
and even i do it, it don't stop say it . and won't continue
by the way
on the sticker on back the phone it say I9000GSMH
and what i start the phone i see logo of anycall
benhouli said:
on the sticker on back the phone it say I9000GSMH and what i start the phone i see logo of anycall
Click to expand...
Click to collapse
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
it's without the antenna
and i know about the 3 files and the pit file...
i tried that
try a lot of roms from the link u give me...
the only one i could start the phone was
Froyo 2.2.1
Asia
ZSJPJ/ZSJPG/OZSJPG
but it was very slow , without sound , and no imei
all the others got me to invalid bootloader
and the version was installed on the phone when i got him was
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
benhouli said:
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
Click to expand...
Click to collapse
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
xsenman said:
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
Click to expand...
Click to collapse
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and why the message invalid bootloader repeat itself ?
after every rom i try to flash?
benhouli said:
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
xsenman said:
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
Click to expand...
Click to collapse
still fail after i got 803 pit and untick repartition
and invalid bootloader too...
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
by the way
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
benhouli said:
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
Click to expand...
Click to collapse
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
xsenman said:
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
Click to expand...
Click to collapse
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
benhouli said:
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
Click to expand...
Click to collapse
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
xsenman said:
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
Click to expand...
Click to collapse
tried both...
both failed
You saod one of them worked... Froyo one i guess.
I think you should try to flash it after that get CM7.custom roms have boot images so...
I suggest this... But not sure if it works
Really sorry mate... I wish you luck .
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?
Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Even if you get a whole rom, it's good. Flash with odin without the pit
Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!
Nothing to do with the the dll file. Congrats for a working phone.
Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing

[Q] Help my 9305

Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken
x_biff said:
Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken
Click to expand...
Click to collapse
if you want to flash official stock rom again you will not need 3 files. go to http://www.sammobile.com/firmwares/ search for i9305 in the firmware searchbar and download the firmware for your country/carrier and after that flash it with odin. select the tar. md5 file in AP button in odin and hit start. all the needed files are in 1 package!
in odin the boxes auto reboot and F. reset time should be checked and re-partition should be unchecked
odin
not work , pit file defect
x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719
viktorak said:
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719
Click to expand...
Click to collapse
already tested with 4 cables nexus 4, original samsung, nokia and new highway wiko
Your partition table might be corrupted. You can try to flash with a pit file.
Search for i9305 pit file, DO NOT USE ANY OTHER VERSION pit file.
Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin
1Ishara said:
Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin
Click to expand...
Click to collapse
enter into download mode with the jig
x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591
MaHo_66 said:
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591
Click to expand...
Click to collapse
pit file only not work , need the unpacked rom (csc modem. tar)

Categories

Resources