Database Develop

[Q] GPS Standalone doubt (Clarification required too)

I know SGS has a lot of issue with GPS. Here's mine. I've cold start and standalone set-up in lbs test mode. Now the problem is it'll lock on to satellites in a matter of 20sec with 15m accuracy only when connected to wi-fi couldn't check for gprs since sgs doesn't save my apn =(. But with wi-fi switched off it doesn't speak to any satellites forget about getting a lock on them. Doubt here is, isn't standalone mode supposed to be GPS working without any data connection of any sort or am I missing something here? Kindly clarify. Also what does MS based and MS assisted mean in the test mode. Checked for GPS with Network Provider selected in test mode. I get accuracy of 3.8km here at my home....
Thanks & Regards

Bump to the top....
Sent from my GT-I9000 using XDA App

I just tested indoors (rainy here) and the SGS did get a lock. I've switched off cellular data and wifi, cleared the AGPS data with "GPS Status", and it took a long time (few minutes) to get a lock.
But that was indoors, where it always takes a bit longer to get a lock.

I tried it outside last evening and it would only see the sat's no lock =|

[Q] Is anyone able to locate yourself with GPS alone?

With data from network I can identify the location instantly. However, if I uncheck "Use wireless network", I have never located myself on Googles Maps. Is it a defect on the GPS?
Thanks in advance!

Google maps doesn't includes world map installed, it only store some caches.. you still need network to download map data & network based location, GPS is used for more accurate result & yes it's true p970 gps is not so good.

lesp4ul said:
Google maps doesn't includes world map installed, it only store some caches.. you still need network to download map data & network based location, GPS is used for more accurate result & yes it's true p970 gps is not so good.
Click to expand...
Click to collapse
Thanks for your help! In fact, I already have cache of Google Maps, then turn off the wireless connection, to figure out the performance of the GPS alone. It sucks!
BTW, I used HTC Touch before and its GPS could identify the location very quickly.

have you test with the GPS fix (in hidden menu) ?

Actually you are wrong, GPS in very good in OB.
I used it for a trip of 700 KM and it has difficulty only the first time when it aquires a position (this is normal if you don't use AGPS) like 3-4 minutes...
On the road I turned off GPS by simply locking the screen (IGO8), and on relaunch the GPS position will not take more than 30 seconds. I don't have any data on my contract so it was purely GPS!
The first time it's normal to take a very long time because a large number of sattelites have to be aquired to for pin-point accuracy. Afterword I think it works with 2-3 visible sattelites!
My previous phone was a HTC Diamond, and it was exactly the same if I dind't used the GPS app every day that downloaded sattelites in advance.

It works but it's slow (as it should be). For me it's around 1 minute in hidden menu. Best place for testing outside hidden menu is Compass app (If you don't have data connection for maps)
For hidden menu:
1. Go into the LG hidden menu (3845#*970#)
2. Go into GPS Test
Test it (you need activated GPS of course)
if it's really slow, try this (I think it's if you use network to pinpoint but everyone is suggesting it, so I will too)
1. Go into System Settings
2. SULP Setting -> SLP Server Setting
create new:
Nokia (slp address: supl.nokia.com, port: 7275, no cert and no TLS setting)
If it still doesn't work, try other variants (LGE SUPL, Spirent, etc).

Thanks everyone!
It works now! The. GPS is quite sensitive!
Sent from my LG-P970 using XDA App

In the gps test in the hidden menu, there's not such option as gps fix.
Me too, I'm interested in using my gps without the assistance of the network cells. I've already tried the three supl servers and it doesn't seems to work for me. So, if someone knows how to use it without network assistance I'll be really grateful.
Thanks in advance.

It should work out of the box.. afaik, you don't need to mess with the SLP servers unless you are using some sort of assisted GPS mode (with wifi or 3g connection). I'm using it straight out of the box (after installing the fresh firmware) and it works normal in the car (1-2 minutes first fix, a couple of seconds for any other subsequent fix). Getting a first fix while on foot does take a bit longer, but that's true with all the other non-android devices I've had. the OB has normal (no more, no less) sensitivity when it comes to GPS.

i think there it`s a problem in OB mine has problems with gps too , and already o try`d all kind of apps and even use the gps standalone from the fresh new update soft and nothing , fix the gps for the first time and after then i can`t travel with standalone gps

[Q] WiFi issue.

Alright, here's the problem. I can connect to my WiFi at work. I get full bars. But it won't pull any data. Nothing loads in any app or browser. It's only here that it happens and I'm the only one with any problems. I've read everything I can find and tried many things (WiFi "fixer" apps (both root and non-root), switching IPs, forgetting the network and setting it up from scratch) to no avail. I've spoken with our network administrator to ask him if he'd blocked any IPs or anything and he assured me that he had not (he doesn't even have the administrative passwords and can't reset the router as it is stuck to the ceiling 50 feet in the air).
So wtf? Anybody have any suggestions outside of a factory reset? I'm all ears. Thanks in advance (I'll also spank your Thanks Button )
Edit: Also, I've been on this network for years. This happened out of nowhere last week and I'm getting frustrated.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Boraltis said:
Alright, here's the problem. I can connect to my WiFi at work. I get full bars. But it won't pull any data. Nothing loads in any app or browser. It's only here that it happens and I'm the only one with any problems. I've read everything I can find and tried many things (WiFi "fixer" apps (both root and non-root), switching IPs, forgetting the network and setting it up from scratch) to no avail. I've spoken with our network administrator to ask him if he'd blocked any IPs or anything and he assured me that he had not (he doesn't even have the administrative passwords and can't reset the router as it is stuck to the ceiling 50 feet in the air).
So wtf? Anybody have any suggestions outside of a factory reset? I'm all ears. Thanks in advance (I'll also spank your Thanks Button )
Edit: Also, I've been on this network for years. This happened out of nowhere last week and I'm getting frustrated.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AT&T Smart Wi-Fi connection manager is a free app that finds and auto-connects to available hotspots, maximizes battery life by only turning Wi-Fi on & off when needed, logs missed hotspot opportunities for your review and action for subsequent use, and displays your real-time cellular and Wi-Fi data usage.

Paulita1 said:
AT&T Smart Wi-Fi connection manager is a free app that finds and auto-connects to available hotspots, maximizes battery life by only turning Wi-Fi on & off when needed, logs missed hotspot opportunities for your review and action for subsequent use, and displays your real-time cellular and Wi-Fi data usage.
Click to expand...
Click to collapse
...You work for AT&T Mobility??? That isn't helpful at all.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Lmao

Boraltis said:
Alright, here's the problem. I can connect to my WiFi at work. I get full bars. But it won't pull any data. Nothing loads in any app or browser. It's only here that it happens and I'm the only one with any problems. I've read everything I can find and tried many things (WiFi "fixer" apps (both root and non-root), switching IPs, forgetting the network and setting it up from scratch) to no avail. I've spoken with our network administrator to ask him if he'd blocked any IPs or anything and he assured me that he had not (he doesn't even have the administrative passwords and can't reset the router as it is stuck to the ceiling 50 feet in the air).
So wtf? Anybody have any suggestions outside of a factory reset? I'm all ears. Thanks in advance (I'll also spank your Thanks Button )
Edit: Also, I've been on this network for years. This happened out of nowhere last week and I'm getting frustrated.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't find the thread where this tip came from at the moment but this is what I remembered. It shouldn't be hard to search thru the forums. It may or may not fix your issue but give it a try anymore. It won't break anything. GL
1. at your dial pad enter *#0011#, this will take you to the SERVICE MODE
2. press the "menu" - the soft key on the left side of home button
3. select "WiFi"
3. toggle the ON/OFF switch to turn off the wifi power save mode.
4. press home button to exit

I've seen android devices fail to resolve domain names on corporate networks. Check if you can ping outside IP addresses and such - if so, there's probably a way to force it to use google public DNS, though of course this won't resolve intranet names...
(Also, before you exert too much effort on this, make sure your corporate wifi is worth connecting to. Some wifi networks in offices are crap...).
Paulita1 said:
AT&T Smart Wi-Fi connection manager is a free app that finds and auto-connects to available hotspots, maximizes battery life by only turning Wi-Fi on & off when needed, logs missed hotspot opportunities for your review and action for subsequent use, and displays your real-time cellular and Wi-Fi data usage.
Click to expand...
Click to collapse
Maybe I'm just spoiled by living in a place with excellent 4G LTE coverage, but I don't see any appeal in connecting to random hotspots - I've never connected to a hotspot that performed better than the 4G, and I don't come close to the data limits of my plan (This month I'll hit 1GB for the first time, I think, because our connection at home was out yesterday, and I had to tether for me and roommate who work from home). Plus good deal of the hotspots I tried (before I realized this was silly) didn't even have internet behind them. The majority of the attwifi ones around here (in red cambridge, ma) don't work - on default settings, I'd just be walking along, and bam - no connectivity, what happened? Oh, it autoconnected to an attwifi hotspot that didn't have any internet connectivity.

I turned the WiFi power saving mode off. I'll report back once I get back to work and check the results.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

No go. Still no data.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Try to manually configure it by using 4636v2. Download from the play store.
Sent from my phone yo!

[Q] Razr I - Failing to swap to Mobile Data after Wireless Connection out of Range

Hi.
I've recently started having lots of difficulty when moving out of range of my home's wireless signal in the phone picking up and connecting to the Mobile Data network.
Specifically:
1) Run phone for ages at home using wireless
2) Walk out of house, out of range. Wireless connection goes unconneced
3) Wait for Mobile Network to connect, have at least 3 bars of signal - fails, no E/G/H Sign, Network indicator stays white ( So far waited up to 3 hours)
4) Reboot Phone, instant Mobile Network Connection @ H
Things I have tried:
1) Turning Wireless off before leaving range of wi-fi, sometimes this works ( circa 1 in 20)
2) Turning Phone to Airplane Mode & Back - sometimes this works ( circa 1 in 15 ).
Turning Airplane mode on can take about 4 minutes, as though something is waiting for a closure timeout. Normally, this takes about 5 seconds.
3) Phone calls are intermittant during this time - sometimes I can make them, sometimes i can't.
4) While in range, turn phone off/on again so a "clean" boot, then walk out of range. No affect on ability to reconnect.
Check Phone Status under About Phone, the Mobile Network States reports "Not Connected"
It's really annoying, as I want to use the phone to during breakfast to check the latest traffic information and map updates from Google Maps before I leave home, then get in the car and go, not reboot the phone.
Has anyone else suffered a similar problem?
Phone Specifics:
Motorola Razr I XT890
Android 4.1.2 Stock
T-Mobile
Is there some investigative
Thanks!

I've had exactly the same issue on/off for weeks.
Not found a reason/fix for it yet, although I've been loath to do a full wipe with how busy I am atm.

6630 4682333
harryjan said:
I've had exactly the same issue on/off for weeks.
Not found a reason/fix for it yet, although I've been loath to do a full wipe with how busy I am atm.
Click to expand...
Click to collapse
Hmm.
At least we know we are not in the same boat, and a recent forum query on Engagdet highlighted others.
I've tried to capture a bug report to give me some logs to look at, but that's not working at the moment either !
Thinking it might be an "Always On" app related problem such as sykpe or amazon mp3 :S

Any way to turn on and off wifi calling with wifi?

I'm getting annoyed that every time I turn off wifi the wifo callind feature keeps bugging me to connect to wifi even if I'm not at home or near any wifi... Any way to shut it up so I can still use it at home but it doeant bug me when im not on a wifi area?
Sent from my 831C using XDA Free mobile app

Anyone?
Sent from my 831C using XDA Free mobile app

There is no current way to do this as far as I know as I don't believe there is a tasker plugin for wifi calling. The only thing you could do is set up key presses in tasker so basically a macro to emulate what you want to do. I used this technique to set it up so when I connected to wifi, it would automatically detect that and switch the phone to CDMA only so the phone is not hanging on to a weaker LTE signal for no reason wasting battery. When wi-fi would drop it would go back and set it to LTE. It actually works fairly well and much better battery life especially since I have a repeater in my office.

Found a way!
This breaks ALL notifications from wifi calling but it doesn't break the functionality of calling itself. So when you're on wifi you just gotta trust that wifi calling is connected (or go into settings to see if it's on). Also it DOES break address confirmation but since this should only be a one time deal for most people you can just reenable the service when you need to confirm your address if you're adding a new network or simply want to re-confirm it. You also wont be able to turn the service on and off in settings, but since it's not a radio itself turning of wifi will kill any battery usage by wifi calling:
1. Get ROMtoolbox (I have the pro version so idk if it works on the free version)
2. Go into app manager
3. Find and open wifi calling (make sure its NOT the one from htc)(also dont just select it, make sure you go into the menu)
4. Go right to the advanced section
5. Select advanced freeze
6. Find the service "vowifiservice"
7. Click on it to disable it and agree to the promt
8. *optional* Reboot the phone or refresh the setting to clear any notifications currently showing
9.???
10. Profit
Sent from my 831C using XDA Free mobile app