Hello All,
I have a Samsung Galaxy S I9000 phone. I am currently on AT&T. I needed to know the APN settings for it. For the first time i see that at $50 GoPhone has included unlimited data now. So i was hoping to make use of it. I have googled and found out many different settings for it. Some same, some with minor changes. But none of them work. I put I know i wont be able to get LTE. But need the normal settings to start using data service.
I currently have this:
Name: AT&T
APN: wap.cingular
Proxy: blank
Port: blank
Username:[email protected]
Password:CINGULAR1
Server: blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: blank
All I see "H" symbol on top appear.
Related
My Captivate can read the SIM Card, but I can't connect to the AT&T service.
I go to Settings > Wireless & Network > Mobile Netoworks > Network Operators > And select AT&T, but it says "Your SIM card does not allow a connection to this network."
On Perception 9.5, When I do the same thing, It says "Unable to connect. Try again later."
I flashed other ROMs and they all do the same thing.
Help?
Are you using an AT&T sim that has a data plan enabled?
ua549 said:
Are you using an AT&T sim that has a data plan enabled?
Click to expand...
Click to collapse
Yep. 3G, Calling and SMS was all working before.
Have you manually checked the apn settings?
newter55 said:
Have you manually checked the apn settings?
Click to expand...
Click to collapse
Yeah.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC 410
Authentication type: None
APN type: Internet + SMS
Rikusaki said:
Yeah.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC 410
Authentication type: None
APN type: Internet + SMS
Click to expand...
Click to collapse
Did you flash a new rom recently? Maybe the modem isn't playing nice.
If nothing else, go get a new sim from the local store and see if that fixes it.
DarrellRaines said:
Did you flash a new rom recently? Maybe the modem isn't playing nice.
If nothing else, go get a new sim from the local store and see if that fixes it.
Click to expand...
Click to collapse
Yeah, I flashed multiple roms (Perception, Doc's, Darky, GingerClone...). They all do the same thing.
I guess I will just head over to AT&T and get a new SIM.
I did a recover of my installed Cognitionv2.3b8 ROM using ROM Manager and now for some reason my phone doesn't get 3G data (or any mobile data) even though it says it's activated. How can I fix this?
Johnny Paranoid said:
I did a recover of my installed Cognitionv2.3b8 ROM using ROM Manager and now for some reason my phone doesn't get 3G data (or any mobile data) even though it says it's activated. How can I fix this?
Click to expand...
Click to collapse
Because you installed a new ROM, you need to re-setup your APN. These settings are carrier specific, and can be found on the carrier website (usually).
You edit (or create APN's) in Settings=> Wireless and Network=> Mobile Networks=> Access Point Names.
Everytime you flash a ROM (because you wipe the data from the phone), you will need to set these up.
If you are having finding your carrier settings, let me know what carrier, and I will see if i can help.
AT&T Steeings are here:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
CHorden said:
AT&T Steeings are here:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
That did it! You're a life saver! Thanks so much!
You are very welcome. Glad I could help.
Got my Captivate last week.
I cannot browse on 3G, everything else seems to work fine: email, market, youtube, etc.
When turn on the Wi-Fi, it do browse perfectly.
Download Skyfire to see if there was a difference but still can't browse on 3G.
Did a lot of search before posting and don't find anyone with the same problem.
whitebeast2 said:
Got my Captivate last week.
I cannot browse on 3G, everything else seems to work fine: email, market, youtube, etc.
When turn on the Wi-Fi, it do browse perfectly.
Download Skyfire to see if there was a difference but still can't browse on 3G.
Did a lot of search before posting and don't find anyone with the same problem.
Click to expand...
Click to collapse
Could be a problem with ur modem. Try using JK4 modem.
check your apn settings, they can be found on here
Check your parental settings on your AT&T account. Does your 3G browsing say this web page can not be viewed at this time? I had similar issues before and it was a setting that I had never touched but somehow it was turned on
The browser reads: Access to this URL has been blocked.
Check the APN settings:
ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.cingular.com
MMS port: 80
MCC: 310
MNC:410
Authentication type: None
APN type: internet + mms
Did I have anything wrong?
Can't seem to find the parental settings....
Thanks for your help!
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
If you do a google search, you'll find here and there forum posts saying that it could be a problem on the AT&T side.
I had exactly the same problem (by the way Firefox was the only browser that still worked on 3G). I contacted a tech support through a chat on the website. It is easier this way because there will be mostly waiting and little interaction. The tech representative first restarted some service (I had to pull the battery out for this step). It did not worked, then he contacted some level 2 specialist (have no idea what's that means), after that there was Tier 3 (or Level 3 - don't remember) support, and at the end everything started working.
Don't know what they changed but apparently it was some setting that only Level 3 (or Tier 3?) tech support has access to.
mcord11758 said:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
Try this but still can't browse.
You did not mention: Authentication type
Thanks.
mcord11758 said:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
Turn Off the Phone and now I'm browsing on 3G.
Thank you so much!!
whitebeast2 said:
Turn Off the Phone and now I'm browsing on 3G.
Thank you so much!!
Click to expand...
Click to collapse
No problem
I just flashed Overcome 3.1 on the my ATT Galaxy Tab 7. The rom is super smooth. Everything appeared to go flawlessly however once completed I was unable to establish a proper data connection.
Its shows 4 bars and says connected to ATT as the "Network" under the Status menu. However the "Mobile Network State" is listed as disconnected.
If I go into the Mobile Network Settings. Under Network Operators ATT is listed under Auto Connect and if I rescan it accepts the choice and then says Registered on Network.
I cannot browse the internet. I called ATT and they were able to send me a SMS so there is some sort of connection. We could not troubleshoot any further as there systems are down.
I did a vanilla Overcome Install. Is there a post install step that I need to do? I seem to remember a similar issue with my Dell Streak that involved modifying my APN settings. Here are the APN settings for the device. (these are the Overcome defaults i believe)
Name: ATT
APN: wap.cingular
Proxy: leave blank
Port: leave blank
User name: [email protected]
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: none
APN type: internet+mms
I read this on this forum somewhere, and has always worked for me when reflashing. This is ONLY for the Pay as You Go data service to my knowledge. Your mileage may vary.
I changed my APN to the following EXACTLY:
Name: Broadband
APN: Broadband
Proxy: leave blank
Port: leave blank
User name: blank
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: not set (delete whats in here)
MMS proxy: not set (delete whats in here)
MMS port: not set (delete whats in here)
MCC: 310
MNC: 410
Authentication type: none
APN type: internet
I always get a connection this way. No MMS, but I don't use it anyway, that's what my phone is for.
The "broadband" apn is only for the sim card that came with a stock at&t tab, and not for the sim cards we all took from other phones.
For the former phone sim cards, wap.cingular or isp.cingular apn's.
The setting should be to "auto".
You didn't mention your modem - baseband.
rangercaptain said:
You didn't mention your modem - baseband.
Click to expand...
Click to collapse
Baseband: I9000UGJK3
Modem: I am not sure how to verify this on the device (Im an n00b). I did follow the wonderful guide on Team Overcome and it recommended using "JK3 Modem" During the install. I would assume this is what I am using. How can I verify this?
PS. I wapped in my phone SIM card and everything works just fine. I can even make phone calls!
Droid2Froyo said:
I read this on this forum somewhere, and has always worked for me when reflashing. This is ONLY for the Pay as You Go data service to my knowledge. Your mileage may vary.
I changed my APN to the following EXACTLY:
Name: Broadband
APN: Broadband
Proxy: leave blank
Port: leave blank
User name: blank
Password: blank
Sever: leave blank (Will read: <not set>)
MMSC: not set (delete whats in here)
MMS proxy: not set (delete whats in here)
MMS port: not set (delete whats in here)
MCC: 310
MNC: 410
Authentication type: none
APN type: internet
I always get a connection this way. No MMS, but I don't use it anyway, that's what my phone is for.
Click to expand...
Click to collapse
This did the trick! I used these settings with the replacement SIM card they gave me at the ATT store...
Good job. The baseband is the modem, so you are using JK3 - that's the best choice for you.
Downloading the AT&T Widget seemed to of helped: http://forum.xda-developers.com/showthread.php?t=898688
Just came from the rezound, upgraded to HTC one. The phone is only a week old, all stock, the data doesn't seem to be working right. Always getting connection timeout or just sits there, arrows on top don't even light up. I've gone thru 4 gigs in less than a week and I haven't done anything. Everything is unsynced and background data is restricted. Called Verizon and got some girl who wouldn't do anything but have me take out the SIM card. Any fix or any suggestions? I can also still return the phone, I'm still under the 14 day trial.
rickyjohn said:
Just came from the rezound, upgraded to HTC one. The phone is only a week old, all stock, the data doesn't seem to be working right. Always getting connection timeout or just sits there, arrows on top don't even light up. I've gone thru 4 gigs in less than a week and I haven't done anything. Everything is unsynced and background data is restricted. Called Verizon and got some girl who wouldn't do anything but have me take out the SIM card. Any fix or any suggestions? I can also still return the phone, I'm still under the 14 day trial.
Click to expand...
Click to collapse
check your apn settings:
settings ---> mobile data ---> access point names
check that your apn is correctly configured for verizon
Name: Verizon
APN: internet or vzwinternet
Proxy: blank
Port: blank
Username: blank
Password: blank
Server: blank
MMSC: http://mms.vtext.com/servlets/mms
MMS Proxy: blank
MMS Port: 80
MCC: 310
MNC: 012
Authent. type: not set
APN Type: internet + mms
You could try installing something like 3g watchdog, or my data manager. It will tell you which apps are downloading/uploading, and how much they have used aswel.
Sent from my HTC One using Tapatalk
Name: internet
APN: vzwinternet
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
Mmsc: its ok!
Mms proxy: not set
Mms port: not set
Mms protocol: wap 2.0
Mcc: 311
Mnc: 480
Authentication type: not set
Apn type: not set
Apn enable/disable: enabled
Bearer: unspecified
I'm guessing it's not right. Stock 4.4.2 - 3.11.605.1