Hey fellows,
I have a Samsung Galaxy S Advance and I saw that exist JIGs for the Galaxy S2 and other models.
I would like to know, if existe any for the Galaxy S Advance? Thx
What do u want to do with the jig?
Sent from my GT-I9070 using xda premium
sameer4344 said:
What do u want to do with the jig?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
What if he wants. :silly:
Probably, he will go to download mode.
sameer4344 said:
What do u want to do with the jig?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I want to safe test roms without risk of brick ... So idk if works...
USB JIG only reset binary count for s2
not work for advance
ramraj48 said:
USB JIG only reset binary count for s2
not work for advance
Click to expand...
Click to collapse
reset binary count and restore download mode if hardbricked . Are u sure the jig not work for advance?
exterminal said:
reset binary count and restore download mode if hardbricked . Are u sure the jig not work for advance?
Click to expand...
Click to collapse
work for only download mode
singhdharmendra48 said:
work for only download mode
Click to expand...
Click to collapse
So, if i buy the usb jig for the galaxy s2 the jig will work with my phone right? I want no restore the download mode if hardbrick and restore the binary count. best regards :good:
exterminal said:
So, if i buy the usb jig for the galaxy s2 the jig will work with my phone right? I want no restore the download mode if hardbrick and restore the binary count. best regards :good:
Click to expand...
Click to collapse
First get to know what can cause hardbrick. Instaling custom I9070 ROM will never do that. Only when you install firmware from some other phone (or non P version to P, and probably P to non P), but you know that you must not do that. And how can he know if JIG will work on our phone?
shut_down said:
First get to know what can cause hardbrick. Instaling custom I9070 ROM will never do that. Only when you install firmware from some other phone (or non P version to P, and probably P to non P), but you know that you must not do that. And how can he know if JIG will work on our phone?
Click to expand...
Click to collapse
bcoz i have a jig and work only download mode not reset binary count
shut_down said:
First get to know what can cause hardbrick. Instaling custom I9070 ROM will never do that. Only when you install firmware from some other phone (or non P version to P, and probably P to non P), but you know that you must not do that. And how can he know if JIG will work on our phone?
Click to expand...
Click to collapse
So it's not so important to buy the JIG... I heard that the binary count has limit ... Is it true?
Related
I can't get into download mode.
2.2
I9000XXJP2
2.6.32.9
[email protected] #1
GT-I9000-eng 2.2 MASTER 332 test-keys.332
What do i have to do to get into the download mode???
Starting to get a little bit of panic now...
/Sandra!
Sent from my GT-I9000 using XDA App
is your phone working or not ???
you probably dont have the 3 button combo, if your phone works, you can fix this using a program called 'Odin'
http://forum.xda-developers.com/showthread.php?t=821698
http://forum.xda-developers.com/showthread.php?t=785201
Have a read through these
Don't i have to be in download mode to use Odin?
Sent from my GT-I9000 using XDA App
well if you had actually read the threads i just posted you would know what im talking about.
azzledazzle said:
well if you had actually read the threads i just posted you would know what im talking about.
Click to expand...
Click to collapse
Yes I replied b4 reading the post u sent me... Will try it now but thank you a lot for the answer!
What do I do if I can't get in to download mod recovery mod or in to the phone?
What do I do if I can't get in to download mod recovery mod or in to the phone?
Service centre only choice left .
jje
JJEgan said:
What do I do if I can't get in to download mod recovery mod or in to the phone?
Service centre only choice left .
jje
Click to expand...
Click to collapse
Are u sure? Can't u fix it with a "fixed" usb? *panic*
you can buy or make a usb jig.... i suggest you buy one, and dont risk making one and damaging it further.
azzledazzle said:
you can buy or make a usb jig.... i suggest you buy one, and dont risk making one and damaging it further.
Click to expand...
Click to collapse
Thnx a lot...
hello guys, I have a serious problem with my mini galaxy.
I try to flash my mini with another phone rom (GT-I5510) and booom my phone is turned off and it won't turn on or go into download or recovery mod and i have tried all the tricks , it does not work .
and also odin does not detect it.
i need a solution guys please
(i did not try the jig method because i don't know if it will work )
and thanks
try usb jig) if not working, then you need jtag...
p.s. s5570i and s5570 have different hardware
lhamza said:
hello guys, I have a serious problem with my mini galaxy.
I try to flash my mini with another phone rom (GT-I5510) and booom my phone is turned off and it won't turn on or go into download or recovery mod and i have tried all the tricks , it does not work .
and also odin does not detect it.
i need a solution guys please
(i did not try the jig method because i don't know if it will work )
and thanks
Click to expand...
Click to collapse
Different hardware....pls do some google search to confirm its same hardware.
Sent from my GT-S5570 using XDA
AndroidUser99 said:
Different hardware....pls do some google search to confirm its same hardware.
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
what do you mean by hardware?
killar_aka_arabu said:
try usb jig) if not working, then you need jtag...
p.s. s5570i and s5570 have different hardware
Click to expand...
Click to collapse
I m sorry but i don't know wath that mean (jtag)
an thanks for you reply
Try volume down, home/ok button and power button and you maybe see yellow trangle and odin works!
Sent from my GT-S5570 using XDA
If all those above steps dont work, there is no other option than going to service center!
Sent from my GT-S5670 using xda premium
Wrong firmware,it is dangerous to play with....u might hard brick ur mini....us should take it to service center then....i think
janmae said:
Wrong firmware,it is dangerous to play with....u might hard brick ur mini....us should take it to service center then....i think
Click to expand...
Click to collapse
Hmm..he install the unfofficial rom and get hard brick no under warranty
Sent from my GT-S5570 using XDA
muro321 said:
Try volume down, home/ok button and power button and you maybe see yellow trangle and odin works!
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
thanks but already try this
lhamza said:
hello guys, I have a serious problem with my mini galaxy.
I try to flash my mini with another phone rom (GT-I5510) and booom my phone is turned off and it won't turn on or go into download or recovery mod and i have tried all the tricks , it does not work .
and also odin does not detect it.
i need a solution guys please
(i did not try the jig method because i don't know if it will work )
and thanks
Click to expand...
Click to collapse
Did you try to power up your phone, if not try it and tell me what happend
---------- Post added at 02:35 PM ---------- Previous post was at 02:30 PM ----------
When you try to power up phone and get this :http://img.tapatalk.com/b206f81e-6d46-c531.jpg . Then we can still fix it (MAYBE)
Thanks guys but i have already fix it .
It was hard bricked.
Ps : i fix it with ljag.
Sent from my GT-S5570 using XDA
it maybe hardware problem,try go to repair shop in your town. i think it will cost under $ 25
Samsung galaxy mini problem
Can anybody help me out ??
I made a partition on my sd, and i have moved play store and my other apps there too, now i made another partition and play play store is GONE !!!! I factory reset my galaxy mini with CWM, and now my phone would not turn on. It keeps being stuck with a black screen after boot.
Thanks.
:crying:
hi! I did update the phone with odin and put the Russian version (4.1) the problem is that I showed PASS in odin and after .. My phone has not started ... What can I do? I was interested and I know 2 ways, either with usb jig or with jtag (in service), there is a possibility to do it? I tried volume + - button in middle of ... + Power but nothing I put in download mode ... waiting for reply thanks!
You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070
frzek said:
You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070
Click to expand...
Click to collapse
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..
AseAlex said:
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..
Click to expand...
Click to collapse
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
yes , GT-I9070P
AseAlex said:
yes , GT-I9070P
Click to expand...
Click to collapse
Omg i9070p not support i9070 rom:banghead:
Sent from my GT-I9070 using Tapatalk 2
Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070
Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
frzek said:
Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070
Click to expand...
Click to collapse
and what to do?
AseAlex said:
and what to do?
Click to expand...
Click to collapse
I don't know. Wait for someone else to answer who have P version.
Sent from my GT-I9070
AseAlex said:
and what to do?
Click to expand...
Click to collapse
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium
Shaaan said:
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
with jtag can repair?
it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no
singhdharmendra48 said:
it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no
Click to expand...
Click to collapse
Well that and I want to do a workshop with jtag .. for to me in romania ... lose the warranty if you change the phone software
the service center will dont know you changed the software..
Sent from my GT-I9070 using xda premium
A LOT OF PEOPLE are bricking I9070-P by flashing JB,
darn it,Read PROPERLY,
Its never mentioned that it works
in P.
I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN
CallMeVentus said:
I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN
Click to expand...
Click to collapse
yeah seriously! ppl just read "s advance" and flash blindly!
I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.
purplepizza said:
I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.
Click to expand...
Click to collapse
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.
shut_down said:
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.
Click to expand...
Click to collapse
Technically the mini should have got a sub forum in s3 forum!! Damned naming system!!
Hi guys,
i have flashed the latest miui on cm 10.1. When i reboot my galaxy ace my battery fell out. i put the battery in and tried to turn my phone on but nothing happened. Can u help me? what do i do now? i have everything tried what i know (cwm) but nothing helped. my display i still black. pls help me
thanks a lot
Try powering phone with charger plugged in phone..
Sent from Unicorn Ace
n0p3zz said:
Try powering phone with charger plugged in phone..
Sent from Unicorn Ace
Click to expand...
Click to collapse
have tried it but still doesn't work but thanks has anyone else a idea?
Goto download mode & flash stock f/w via odin. Dats what u can do now.
Sent Via XDA™ Premium
Galaxy_Rohit said:
Goto download mode & flash stock f/w via odin. Dats what u can do now.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
I think he cant power on his phone at all so he cant go into download mode...did you tried charging it over the night( i mean just left it on charger and see what happens in the morning)
Sent from Unicorn Ace
Yes, i have. but still nothink. is it a hardware or software problem? what du you think? and where can i go to repair it? and what can i say there? maybe somethink with kies ?
pls help me
Thilo123 said:
Yes, i have. but still nothink. is it a hardware or software problem? what du you think? and where can i go to repair it? and what can i say there? maybe somethink with kies ?
pls help me
Click to expand...
Click to collapse
May be your battery is damaged. Try it with a new battery.
Sent from my GT-S5830 using xda premium
I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!
JoePhilip said:
I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!
Click to expand...
Click to collapse
What method did you use to update it?
shut_down said:
What method did you use to update it?
Click to expand...
Click to collapse
From the settings in the phone, check for updates then update, it downloaded then said it would restart
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I'm pretty sure it was the right update, all i did was wait for it to load and install, then after restarting i waited for half an hour and the phone didn't turn on, then i removed the battery and put it in again, still nothing
Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Oh I was actually typing my post when he posted his post so i didn't know what he had posted so that's why I asked that.
Sent from my GT-I9070 using xda premium
JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?
shut_down said:
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?
Click to expand...
Click to collapse
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up
JoePhilip said:
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up
Click to expand...
Click to collapse
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.
JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10
shut_down said:
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.
Click to expand...
Click to collapse
I gave it to a repair shop and they told me it'll be ready by tomorrow I hope it works
AnMotass said:
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10
Click to expand...
Click to collapse
Let's just say i bought it without one
i have the same problem
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070
eng_hossam_09 said:
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070
Click to expand...
Click to collapse
FACTORY RESET. I see you posted from your phone, soo it boots.