Database Develop

Anyone tried CWM image file on Gingerbread firmware?

Hey all!
I recently updated my phone's firmware to 2.3.5 (S5570XWKS7 firmware).
Has anyone tried downloading the recovery image from here
http://www.clockworkmod.com/rommanager
and installing it on a gingerbread firmware?
Thanks in advance!

Go here, download and flash from odin in 2 seconds last CWM for own phone ;-)

yeah works fine

lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!

quendil said:
lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!
Click to expand...
Click to collapse
well changing recovery from recovery is like to say someone kill yourself and when you finish make me a sandwitch

quendil said:
lol
Tried to flash it through normal recovery (renamed to update.zip) but the screen went all fuzzy!
At least i didnt brick the phone!
Click to expand...
Click to collapse
That simply will not work on a un-rooted phone. The stock / original recovery has very limited functionality.

Well, it's easy. Just follow this way:
1. Download the attachments to this post. (tass-recovery.cwm is the recovery, the other .rar has odin and tass.ops)
2. Put upd_1.zip on the root (On top, not in a folder) of your SD-card.
3. Boot into recovery. (When phone is powered off: Home-button + power) (Now you'll root your phone.
4. Use the volume buttons to highlight 'apply update from sdcard', then press home to select.
5. Use volume buttons to highlight 'upd_1.zip', then select with the home button.
6. Press home button to 'reboot system now'. Your phone is now rooted.
7. Power down your phone.
8. Enter download mode by pressing 'Volume down + Home button + power button.
9. Connect through USB to your PC.
10. Launch ODIN v4.38.
11. Wait for Odin to recognize your phone. (At the left, there will be a yellow box that says COM "?", the number can be different.)
12. Select Tass_v1.0.ops by pressing the 'OPS-button'
13. Make sure 'One package' is marked at the left of the window.
14. Select tass-recovery-cwm.tar with the 'One Package-button' at the bottom of your window.
15. Press start, wait 'till your phone reboots. Now you'll have ClockWorkMod-recovery installed.

then you're ready to flash any custom roms
via Public Phone ^-^

[Q] Mini S5570I stuck on loading screen / failed recovery flash

Hello,
So I have a galaxy mini s5570i version and I tried to flash recovery on it. As i realized Odin can't seem to identify this version, I might be wrong tho, god hope so. So i tried to find another way of flashing it. I managed to get root on it (with an update.zip) but I couldn't find any cwm for it, so at last I tried my luck by putting the s5570 cwm 5.2.0.8 touch recovery on it via the original recovery.
Now the phone hangs on boot logo, I assume it can't find the system partition or something like that.
I'm still able to get into stock recovery and download mode.
What are my options?
Can I get custom recovery on it via odin or sd card or somehow?
Can I get back to original Android at least via sd and downloaded stock ROM and update that?
Thanks in advance

Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!

missing parts
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.

dglteam said:
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
Click to expand...
Click to collapse
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead

FixMyProblems said:
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
Click to expand...
Click to collapse
yes, it turns into Download mode. but Odin did not recongnise phone. it says: odin mode..check platform verification

FixMyProblems said:
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
Click to expand...
Click to collapse
many many thanks to you my friend.. finally finished .. thanks a lot

sir plz guide me my phone is stuke when i start mobile

Samsung gt-s6500D root

Hello.
I'm tryint to root my phone with 2nd method on this link http://forum.xda-developers.com/showthread.php?p=27596546
first download files from here
cwm recovery
doomlord's kit
boot phone in download mode by pressing vol down+home key+power button
open odin3 1.85
click the PDA button on the midle right and then select clockworkmod-5.0.2.8.tar.md5 that you downloaded
click start.
w8 for it to say pass with green background
now the phone will boot normally
shut it down again and press vol up+down+home+power to go to recovery
it will show gt-s7500 but it doesnt matter!
Now close Odin
when it gives you a menu go to your pc to the rootme.zip that you downloaded
extract everything in desktop
run the runme.bat (my first time failed so repeat)
w8 for it to finish
press the home button (it should be on the first choise of the menu "reboot system" )
you are done!
ENJOY ROOTED S6500 AND s6500D
Click to expand...
Click to collapse
everything in green works for me but after I press vol up+home+power I don't see gts7500 it's the same gts6500d adn there is no menu I get only this screen: http://i.imgur.com/G5TduZ8.jpg

You use volume up + power + home to open recovery?
It's volume up + volume down + power + home
If I HelpeD U PresS ThankS
Sent from my device GT-S5570I in my own words

[Q] How to root and install Custom rom

I want to root and install Custom rom on my Samsung galaxy s3 19305T on stock android 4.3
Sent from my GT-I9305T using XDA Free mobile app

Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.

How to root your samsung galaxy s3

How to root your Samsung galaxy S3 Running Android 4.3 XXUGNA8

Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.

Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
my Galaxy S III i9300 not i9305

Then why are you posting in the wrong forum....

Raistlin1158 said:
Steps:
1. Download Odin from this post.
2. Download I9305_CWM_Recovery.tar.md5
3. Unzip Odin to your desktop.
4. Copy the I9305_CWM_Recovery.tar.md5 to the same directory.
5. Boot your SGS in to download mode.
(Power off and then press and hold the power + volume down + home buttons at the same time)
6. Connect your phone to your PC using the cable that came with it.
7. If Kies is running on your pc shut it down.
8. Open the Odin application.
(Make sure your phone is detected, there will be a yellow square in the top left corner.)
9. Choose PDA button and select the I9305_CWM_Recovery.tar.md5.
10. Press start and wait. Your phone will be flashed and reboot when it is finished.
(After Odin finish let the device reboot to android at least one time before applying I9305_CWM_Recovery.tar.md5.)
11. When the phone reboot, power it off again.
12. Put the phone in recovery mode.
(Hold down power, volume up and home when the device is turned off and unplugged.)
13. After that you can flash the Root_SuperSU.1.02-Busybox.1.21.0.zip to be ROOTED to any firmware and make a backup and restore of your firmware, also you can now flash any custom rom / kernel made for GT-I9305.
Click to expand...
Click to collapse
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?

godlesplay said:
what about knox etc? is it safe to flash this? will knox will change from 0x0 to 0x1 after this?
Click to expand...
Click to collapse
Yes this will trip knox, but you can use Triangle Away to reset the counter

If you are thinking of changing to custom ROMs then use CyanogenMod installer

G33k_ said:
Yes this will trip knox, but you can use Triangle Away to reset the counter
Click to expand...
Click to collapse
is there any other way to root s3 lte without rising knox?

Hi,
i got this Phone for my Girlfriend yesterday. There is 4.4.2 on the Phone. Does this work on this Version too?
Best regards
Chris
EDIT: sorry, wrong phone version.
Unterwegs @ G-Pad