Yep MB886 on QPST mode or QHSUSB_DLOAD or whatever that is. Any possible fix for this hard brick?
Related
Hello ,
Is it possible to recover data after QDL mode ?
And is it possible to recover phone ? I was trying to recover it using Ubuntu but no luck
i think this should be the solution
MPooZD said:
Hello ,
Is it possible to recover data after QDL mode ?
And is it possible to recover phone ? I was trying to recover it using Ubuntu but no luck
Click to expand...
Click to collapse
hi,
even i bricked my opo
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
found this but too late. already sent the phone for a motherboard replacement.
Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?
EAimTY said:
Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?
Click to expand...
Click to collapse
No.
I tried to flash through EDL mode with this method:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
Turned out it didn't work, but now I'm stuck on a black and non-responsive screen wich I guess is EDL mode. Physical keys doesn't work either.
So I tried this repair method:
https://forum.xda-developers.com/rog-phone-2/how-to/repair-rog2-phone-edl-modeofficial-t4012175
to no avail. PC sees the phone, but the flashing fails.
Is there a way out of here ?
Ok so that's Vol-/Vol+/Power to get out.
duck from space said:
Ok so that's Vol-/Vol+/Power to get out.
Click to expand...
Click to collapse
HAHAH. thanks. i was in same situation
same here
apollo3x said:
HAHAH. thanks. i was in same situation
Click to expand...
Click to collapse
same here
i hope someone give us a solution with this problem
bxujayz said:
same here
i hope someone give us a solution with this problem
Click to expand...
Click to collapse
Just follow what the guy above said. That's the solution man.
Same here
Stuck in EDL mode
Im in EDL mode and cant reboot the phone, anyone know how to reset?
Device manager picks it up as Qualcomm HS-USB QDLoader 9008 COM 4
Vol-/Vol+/Power isnt working for me, do you just press each button in that order or hold them down?
Update: I held down all three buttons for around 30 secs and the bootloader popped up.
Thanks.
Hi everyone,
I was wondering does anyone know the Nokia TA-1004 JTAG points by any chance?
I tried looking around and I can't seem to find anything.
Because of my bricked device, I am thinking of going down the JTAG route to extract my data.
This is the absolute last resort as I REALLY don't want to loose any of my data, primarily Contacts and Messages
Hope to hear back from you wonderful lot ?
Nokia_8_fan said:
Hi everyone,
I was wondering does anyone know the Nokia TA-1004 JTAG points by any chance?
I tried looking around and I can't seem to find anything.
Because of my bricked device, I am thinking of going down the JTAG route to extract my data.
This is the absolute last resort as I REALLY don't want to loose any of my data, primarily Contacts and Messages
Hope to hear back from you wonderful lot
Click to expand...
Click to collapse
I don't know what JTAG is. Please give some more info about your bricked device, how you bricked it etc. It might be possible to recover it without hardware intervention. Looking at your current post I am guessing you have a hard brick. In that case you have 2 options:
1.) Press and hold power button for about 2-4 minutes and wait for the device to shut down. When the device shuts down, boot to fastboot mode and fix any broken partitions.
2.) If that doesn't work you need hardware based methods. You need to open your device and short some pins to enter Qualcomm EDL (Emergency Download) mode. From there you can recover your device.
emufan4568 said:
I don't know what JTAG is. Please give some more info about your bricked device, how you bricked it etc. It might be possible to recover it without hardware intervention. Looking at your current post I am guessing you have a hard brick. In that case you have 2 options:
1.) Press and hold power button for about 2-4 minutes and wait for the device to shut down. When the device shuts down, boot to fastboot mode and fix any broken partitions.
2.) If that doesn't work you need hardware based methods. You need to open your device and short some pins to enter Qualcomm EDL (Emergency Download) mode. From there you can recover your device.
Click to expand...
Click to collapse
Thanks for getting back to me.
I have done both suggestions and they don't work.
It is probably a hard bricked device, the only thing I can get is a 9008 recognition in Device Manager.
QFIL, OST and NOST doesn't seem or want to communicate with the device either
Did you open your device and short the pins required? EDL mode is different than Download mode. OST and NOST work in Download Mode not EDL. QFIL does support EDL mode. If you look at this article (https://xiaomitools.com/how-to-use-qualcomm-flash-image-loader-tool-qfil/) at Step 5 it mentions that the device should be recognised as 9008 which you mention it does. Have you installed the Qualcomm drivers? Please provide some screenshots too, it is difficult to help you without specific info about your problem
emufan4568 said:
Did you open your device and short the pins required? EDL mode is different than Download mode. OST and NOST work in Download Mode not EDL. QFIL does support EDL mode. If you look at this article (https://xiaomitools.com/how-to-use-qualcomm-flash-image-loader-tool-qfil/) at Step 5 it mentions that the device should be recognised as 9008 which you mention it does. Have you installed the Qualcomm drivers? Please provide some screenshots too, it is difficult to help you without specific info about your problem
Click to expand...
Click to collapse
@emufan4568
Sorry for my late reply, but I thought Download Mode is the same as EDL mode???
And yes, I have the Qualcomm drivers installed.
I have also shorted the EDL pins on the board, this did not do anything at all.
I have tried QFIL many times and it keeps giving me error messages.
I have done so many things and posted screenshots across the forums that I am at a complete lost!
Nokia_8_fan said:
@emufan4568
Sorry for my late reply, but I thought Download Mode is the same as EDL mode???
And yes, I have the Qualcomm drivers installed.
I have also shorted the EDL pins on the board, this did not do anything at all.
I have tried QFIL many times and it keeps giving me error messages.
I have done so many things and posted screenshots across the forums that I am at a complete lost!
Click to expand...
Click to collapse
EDL mode is Emergency Download Mode in Qualcomm devices for recovering the device at a low level. QFIL calls it download mode but it really is not. Download mode in Nokia phones is really fastboot mode or bootloader mode where you basically communicate with the bootloader and flash/erase images from the device. From what I have seen though NOST supports EDL mode too (with the Emergency Download option) but it does not really work well.
Hey everyone,
yesterday my zenfone 8 just shutdown without any sign of a problem before . i thought its nothing but since then it dosnt turn on !!!
my only hope is when i connected it to my pc i got qualcomm 900e , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update.
but still no fastboot no nothing.
i understand there is a way with qfil tool but i dont know how to get the files for it. any help please???
i see that qfil can fix it with rawdata and patch0 but i dont have this files. can some one please help???
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
AzimBahar said:
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
Click to expand...
Click to collapse
Hey azim , i downloaded the files but it seems it knows that i am on 900e even when i tries to use other drivers to be 9008. can you please assits how to get out of 900e?? btw i managed to get the files out of my device but sahara server failed because of 900e :/
Connect phone to pC using test point and follow guides
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
AzimBahar said:
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
Click to expand...
Click to collapse
I dont understand what i need to do . I even tried with edl cable but still stuck on 900e
Once try to uninstall USB Driver & install ASUS QCOM Driver.
As you said , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update
Click to expand...
Click to collapse
After try again !
Note - You May use EDL Cable for EDL mode !
AzimBahar said:
Once try to uninstall USB Driver & install ASUS QCOM Driver.
After try again !
Note - You May use EDL Cable for EDL mode !
Click to expand...
Click to collapse
I tried with edl cable... Only test point left to find
duduhayo said:
I tried with edl cable... Only test point left to find
Click to expand...
Click to collapse
sir i have the same issues, are you know the test point right now?
Kiyori said:
sir i have the same issues, are you know the test point right now?
Click to expand...
Click to collapse
Hey, i wish. No one found it, I am still waiting for the one