Related
Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..
What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
But you have to worry about?
What are the consequences?
Is serious?
crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.
sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.
Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.
okay so new to the whole WP7.5 scene coming from android so im wondering how to dev unlock my HD7 ofc but i have this pressing issue of how mango is supposedly locked down for now or something
is their a way to downgrade my bootloader inorder to unlock WITHOUT external hardware or a goldcard except a windows 7 computer Data cable and HD7 if anybody can help greatly appreciated thanks
ps i did search but all info is old or confuses me kinda seems the WP7 is in shambles right now half of us want android the other half dont and everything for dev unlock that i can find is Goldcard i know theirs got to be another way
actually 2 ways
Franzferdinan51 said:
okay so new to the whole WP7.5 scene coming from android so im wondering how to dev unlock my HD7 ofc but i have this pressing issue of how mango is supposedly locked down for now or something
is their a way to downgrade my bootloader inorder to unlock WITHOUT external hardware or a goldcard except a windows 7 computer Data cable and HD7 if anybody can help greatly appreciated thanks
ps i did search but all info is old or confuses me kinda seems the WP7 is in shambles right now half of us want android the other half dont and everything for dev unlock that i can find is Goldcard i know theirs got to be another way
Click to expand...
Click to collapse
hi Franzferdinan51
actually there are 2 ways;
1; goldcard
2; HSPL/RSPL
first you have to see if your phone is supported for custom rom.
enter bootloader and see info ....
cheers and have a gr8 day
thanks button is next to qoute button
Hi,
did you solved your downgrade problem?
you didn't gave enough informations about your device (ie os/boot version) but you can try ansar's spl rom here...works on european devices.
no i'm still unsuccessful this is what my bootloader reads
PD29110 SS-BC (4K)
SPL-5.10.2250.0(132968) MNG
MicroP(LED) 0x07
TOUCH S1(V1.8,#1624)
SD SANDISK 15193MB
Partition Info-v211v413
any help would be much appreciated i cannot do gold card
you have to down load a stock rom first.....http://forum.xda-developers.com/showthread.php?t=1411904
flash/install rom
that will downgrade hspl
then check hspl again....it should not be 5.1 anymore
then flash cotulla custom hspl
them get and install custom rom of your chose
cheers and have a gr8 day
thanks button is next to qoute button
device relocked
hey guys, i know this isn't in the correct (specific) thread, but i can't post there yet because of the 10 post rule.
So I have DeepShining 7.6 and everything was great until I used HTC Connection twice. Now XAPs won't deploy and Zune always says something about not being able to connect the device through the internet and also I had some tweak for WMDC to detect the phone, but now it does not.
I know that using HTC Connection Setup twice can relock the device but I can't change the past I would just like to know what I can do now (besides reflash) to fully unlock the device.
Also, if there is no other way besides reflashing; does anyone know a way to back up all things like the layout of my pinned tiles and just general data like that, including apps downloaded. I really do not want to have to install all my apps again, then restart my games, then reset all the settings in my apps, then add my contacts again etc.
Sorry if I'm hijacking the thread but I really did try to search everywhere for a suitable solution to no avail.
Thanks for any help.
Hi, I have a HTC HD7 and is being bricked for a while now, I went to a couple of shops to see if they could fixed but none of them did.. So I would like to know if someone here could help me and I would pay for it.. I live in Miami, FL and if someone is around here south florida, that can do it please let me know and get in touch with me.
Thanks,
Jr ritzer
See if you can enter bootloader,if you can u can flash a new rom using the goldcard method
http://forum.xda-developers.com/showthread.php?t=1295068
bootloader
hey sirajgoku, thanks for the link..:good: im going to try ur advice, but can u please tell me where to get a goldcard and another thing I just try to get the hd7 in bootloader and it got and it's showing me this "PD29110 SS-BC (4k)", do u know where can I find what that means..
thank u so much for everything.
The PD29110 is your devices MID (model id) There are a couple goldcard method tutorials available for hd7. Here's a pretty detailed one you can follow. you need a card reader, some USB cables to make a Y cable, easiest method Y cable (otg)
http://forum.xda-developers.com/showthread.php?t=893152
The hd7 is considered the Schubert, which you'll see in the tutorial.
Are you getting any other information while in bootloader mode, like bootloader version, OS or mico info?
If you found this helpful please click he thank you button!
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
Ok, definitely bricked, but is it a small or big brick and it sounds like you have the big brick! Then the only other question is, can you enter USB host mode still and if so does your computer recognize it when it's plugged in? Press camera+volume down+power on, to enter in host mode.
If you found this helpful please click the thank you button!
Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
If you can get to BL mode then you should be able to get to USB HOST MODE. If you can do that PM me. I'm in Ft Lauderdale not too far and I'v goldcarded at least ten of 'em. If you can't get to Host mode next stop JTAG.
It will go into bootloader mode but it's bricked. Meaning there's only one line of information showing in BL mode which is the devices MID. If it will go into USB host mode there is a possibility of fixing it using the Goldcard method. If it won't go into USB host mode, there is one more possibility of fixing it besides using and having to resort to the Jtag/riff box. Using a cab and the cab sender, like the schubert 2250.21.50001.728 cab. Which if successful would upgrade the spl to 5.xxx and would added a few more lines of information to the bootloader screen but wouldn't repair it completely to where the serial/USB show up on the bottom line. However this should allow you to enter into USB host mode now and then you could use the Goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what version you flash. At this point you can update through Zune to the current OS version and mango. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom!
Hi guys,
I bought a HD7 a while ago, and it had been nice to use, right up to when it decided to randomly restart, and freeze. Saw there was a 7.10 update, and went for it. Half way through the update, my phone restarted, out of the blue, as the updates where installing... Typical, eh? so, before it did restart it had took a back up, Zune saw the backup and I attempted to restore. A few hours later, it had failed and the device doesn't boot past some stupid PC connection screen. Its a black screen with a mobile device, connected to a computer....
So... After a while of research, I decided to downgrade, and then flash a custom rom.
problem being, I wasn't able to get the bootloader info or OS version before the phone decided to brick its self. When I was an android user, I had bricked my phone many times, but this is so much harder.
Heres the info from what I got from the bootloader screen,
PD29*** SS-BC (4K)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Can any one help me with this?
I am on o2 UK.
I have been attempting to use task 29+00. Apon using 00, I use radio 1.16 and 1.69 and both somehow restart the phone from the install percentage bar. Also been pointed to the this website, an archive of xda: http://forum.xda-developers.com/wiki/HTC_HD7/Radios
Can some one give me a helping hand and point me in the right direction?
Thanks!
davalav said:
Hi guys,
I bought a HD7 a while ago, and it had been nice to use, right up to when it decided to randomly restart, and freeze. Saw there was a 7.10 update, and went for it. Half way through the update, my phone restarted, out of the blue, as the updates where installing... Typical, eh? so, before it did restart it had took a back up, Zune saw the backup and I attempted to restore. A few hours later, it had failed and the device doesn't boot past some stupid PC connection screen. Its a black screen with a mobile device, connected to a computer....
So... After a while of research, I decided to downgrade, and then flash a custom rom.
problem being, I wasn't able to get the bootloader info or OS version before the phone decided to brick its self. When I was an android user, I had bricked my phone many times, but this is so much harder.
Heres the info from what I got from the bootloader screen,
PD29*** SS-BC (4K)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Can any one help me with this?
I am on o2 UK.
I have been attempting to use task 29+00. Apon using 00, I use radio 1.16 and 1.69 and both somehow restart the phone from the install percentage bar. Also been pointed to the this website, an archive of xda: http://forum.xda-developers.com/wiki/HTC_HD7/Radios
Can some one give me a helping hand and point me in the right direction?
Thanks!
Click to expand...
Click to collapse
The goldcard/ Ycable method is your best bet and truthfully your only hope without having to use a Jtag or Riff box. The goldcard method can repair a damaged bootloader and is used while in USB host mode... The black screen indicating to connect to a P/C. This is the basic idea of it...use the goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what rom version you flash. At this point you can update through Zune to the current OS version. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom! Here's Shadows tutorial on how to downgrade spl, this will give you a background on how the process work and links to all the shipped/stock roms:
http://forum.xda-developers.com/showthread.php?t=1295068
This gives a good view and idea on how to make the cable:
http://forum.xda-developers.com/showthread.php?t=1676794
If you need anymore help just let us know!
Hi, i have an half bricked HD7
Hi, i have an half bricked HD7 :when i used goldcard it stayd in enter usb mod ...would u help me?
asadasad11 said:
Hi, i have an half bricked HD7 :when i used goldcard it stayd in enter usb mod ...would u help me?
Click to expand...
Click to collapse
Hi,
When it gets stuck on "Enter USB host mode" it means that it can't read the file from the SD card.
Try this -
1. Try switching around the connections of the Y cable.
2. Try a different SD card reader. This is usually the problem.
3. Make sure you renamed the .nbh file to SCHUIMG.nbh (has to be capitalized)
4. Sometimes the camera button will get stuck in and prevent the device from reading the file.
Also when the device gets stuck on "Enter USB host mode" you have to reset the device to get an active connection again... Disconnect the Y cable from the device, pull the battery and reinstall, then re-enter USB host mode and try the flash process again.
Try those and let me know if you have any success!
hi
do u know anyone with this problem, how i can contact with him/her?
I just got this message:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'PD291500'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
My phone is an AT&T HTC HD7S model PD29150 on the SPL screen. Is it just that last 0 that's missing that's causing all of this? My SPL screen also says SS-BC (4K) and SPL-4.5.2250.0(129185) MMG
I updated it with SevenEighter to that latest Windows Phone OS 7.8 and I now badly need to unlock it.
Any help please?
Thank you!
(P.S. I thought the Schubert was supported on DFT_XSPL_WP7FG1..)
(P.S.2. I tried DFT_XSPL_WP7FG2 and it does properly detect my phone as a Schubert but my SPL is 4.5 and the newest I can select from the list is 3.4. Is there a newer version of this DFT tool for me to use?)
TLDR;
The simple step to be done here, since you have the same phone as me, is to use Y-Cable a goldcard and downgrade the bootloader with this ROM: RUU_Schubert_Cingular_US_3.03.502.04_Radio_5.66.09.09a_22.46.50.21_Signed_SCHUBERT_RELEASE
after that you can use Dynamics and forget about those idiotic official roms, because they suck!
You don't need to report anything to DFT, and this post is USELESS! You can unlock it with the RUU_Schubert_Cingular_US_3.03.502.04_Radio_5.66.09.09a_22.46.50.21_Signed_SCHUBERT_RELEASE and upgrade via zune, but that takes TOO MUCH TIME, it is better to use Dynamics, and you'll get only 2 updates: the 8860 and the 8862, and that'll be all.
faustolg said:
The simple step to be done here, since you have the same phone as me, is to use Y-Cable a goldcard and downgrade the bootloader with this ROM: RUU_Schubert_Cingular_US_3.03.502.04_Radio_5.66.09.09a_22.46.50.21_Signed_SCHUBERT_RELEASE
after that you can use Dynamics and forget about those idiotic official roms, because they suck!
You don't need to report anything to DFT, and this post is USELESS! You can unlock it with the RUU_Schubert_Cingular_US_3.03.502.04_Radio_5.66.09.09a_22.46.50.21_Signed_SCHUBERT_RELEASE and upgrade via zune, but that takes TOO MUCH TIME, it is better to use Dynamics, and you'll get only 2 updates: the 8860 and the 8862, and that'll be all.
Click to expand...
Click to collapse
No it's not useless, at least n00b users like me aren't puzzled by that message now.
I am still having a hard time doing what you said, I made my own Y USB cable and the power's fine it's just that I don't have a MicroSD card reader and so I'm trying to use a 4 GB flash drive to do the thing but it's like my phone doesn't detect it at all.
So I downloaded what you said.
Do I still have to rename that .nbh file to SCHUIMG.nbh?
And what about that confusing Goldcard, some posts say I can use any goldcard.img, is that true or do I have to make one in accordance with the flash storage card or drive I'm using on the other side of the Y USB cable?
Shouldn't the CID in the goldcard.img file match the one of the device I transferred the .nbh file to?
I saw a thread, I forget where it is now, that said something along the lines of: "just download and use this goldcard.img file".
Weren't we supposed to make our own by using http://psas.revskills.de/?q=goldcard ?
And anyways, most of the threads here are horribly old and full of linkrot, what do you expect me to make of them?
At least I'm trying and hopefully you guys will FINALLY have a how-to that is properly written in English with SkyDrive links that don't expire like the rapidshare ones...