Hello Community,
I have one problem my Samsung Galaxy S i9000 is in a bad condition, because I can not download any Apps or Softwares,
I also have tried to reset the Phone but I always get the same Message (No Deleteduty / I am not sure Iv'e got the right word in German means Löschdienst) I tried also Reset with the Code ........
So I like to Flash my Handy with a new Software but their is the next problem I can not use the Downloadingmode on the Phone (Volumedown / Home/ Power) I can not go in the phone.
Can somebody please help me
Maybe it's just penauts for some Guys here in the Forum (sry for wasting Time)
, but for me its a problem
Are you sure you are doing the downloadmode the right way? In doubt follow this guide: http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_galaxysmtd
Also id like to know where your problem with the „löschdienst„ exactly occurs
Sent from my GT-I9000 using xda app-developers app
Oldmann99 said:
Hello Community,
I have one problem my Samsung Galaxy S i9000 is in a bad condition, because I can not download any Apps or Softwares,
I also have tried to reset the Phone but I always get the same Message (No Deleteduty / I am not sure Iv'e got the right word in German means Löschdienst) I tried also Reset with the Code ........
So I like to Flash my Handy with a new Software but their is the next problem I can not use the Downloadingmode on the Phone (Volumedown / Home/ Power) I can not go in the phone.
Can somebody please help me
Maybe it's just penauts for some Guys here in the Forum (sry for wasting Time)
, but for me its a problem
Click to expand...
Click to collapse
you can try to go to download mode via ADB (Android Debug Bridge)
you need the android SDK ( google for it you'll find it, and install it !!)
if you have installed it you have to check the developer options for activating the debugging via ADB
now you can open a CMD on you pc move to you Android directory ant there to platform tools
example "cd C:\Program Files\Android\android-sdk\platform-tools\"
there you can call the ADB and check if your device gets detected
for this type "adb devices"
if it shows an device all is ok ...
if not you havent the driver or debugging is not activated in developer options
if it shows your device you can type "adb reboot download" in your cmd
and it should reboot to download mode
Hope i can help you
Greetz StalCaiRe
after flashing cm 10.1 i lost my imei number and now i got no network =\ only wifi
i flashed werewolfJB kernel v004
anyone please help
raviboy100 said:
after flashing cm 10.1 i lost my imei number and now i got no network =\ only wifi
i flashed werewolfJB kernel v004
anyone please help
Click to expand...
Click to collapse
Have you tried formatting the /system partition and reflashing the official CM 10.1? I had a lot of fun recently with the IMEI partition of the Samsung Galaxy S II which seems to fall apart quite easily, but I don't know if it's even possible to break your IMEI information on our phone.
raviboy100 said:
after flashing cm 10.1 i lost my imei number and now i got no network =\ only wifi
i flashed werewolfJB kernel v004
anyone please help
Click to expand...
Click to collapse
sometime ago, when i was LG p990 user, i had flashed Cyanogen 10.1, and lost the IMEI, and following the instructions below, I could recover it, but the only problem is that you need the LG stock Official ROM, because you have to set a option in the hidden menu.
maybe works for LG p880, to access hidden menu is 1845#*880#
1. Connect phone by USB
2. Enter 1809#*990# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=XXXXXXXXXXXXXXX , where x,x,x... is your orginal IMEI number
8. Reset
No i got it back now i did a nandroid backup which restored the imei but also stock firmware =/
I really want cm10.1 so bad but without imei i cant do anything so ill try the hidden menu option
Sent from my LG-P880 using xda premium
raviboy100 said:
No i got it back now i did a nandroid backup which restored the imei but also stock firmware =/
I really want cm10.1 so bad but without imei i cant do anything so ill try the hidden menu option
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
Try to flash it again
Sent from my LG-P880 using xda app-developers app
what is not losin the IMEI good for?
Ok. I have this same problem but i don't have backup and windows on pc. Only linux :/
I try flash cm or make factory reset but this don't work :/
I wipe everything in cwm but i have normal cm, this dont delete any data :/
Somebody have blank orginal rom backup ??
Plaease help me, i don't have any idea :/
damn, same problem after flash cm rc3.
and no system backup at all.
good for you, LG
Ok i back to the nightly version and everything works so this is rc3 bug
Wysyłane z mojego LG-P880 za pomocą Tapatalk 2
IMEI Problem on RC3 & RC4
RC3 & RC4 still have problem witt IMEI. Go back to Nightly and IMEI back.
LOST IMEI
*delete*
donkanmcklaus said:
sometime ago, when i was LG p990 user, i had flashed Cyanogen 10.1, and lost the IMEI, and following the instructions below, I could recover it, but the only problem is that you need the LG stock Official ROM, because you have to set a option in the hidden menu.
maybe works for LG p880, to access hidden menu is 1845#*880#
1. Connect phone by USB
2. Enter 1809#*990# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=XXXXXXXXXXXXXXX , where x,x,x... is your orginal IMEI number
8. Reset
Click to expand...
Click to collapse
When I try this I just get "device no recognised" in Windows after I select "CP USB" on my phone.
Am I missing a driver file? If so, which one?
My IMEI got lost after my phone crashed out on me. I've tried flashing kz and kdz but that won't work, regardless of what I try, on whatever computer.
WeeJockMacFeegle said:
When I try this I just get "device no recognised" in Windows after I select "CP USB" on my phone.
Am I missing a driver file? If so, which one?
My IMEI got lost after my phone crashed out on me. I've tried flashing kz and kdz but that won't work, regardless of what I try, on whatever computer.
Click to expand...
Click to collapse
I currently got the same issue. Did you solve the problem?
Had to get the phone replaced.
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
I can't able to flash because i get error after flash "checksum error",,can you please help me my phone is dead now,,,only i hear connection sound of usb,,other nothing show after flashing!!
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
Getting error.
For CheckSum Error
Try flashing with this file " Micromax_AQ4501_V9_29.08.14 " from XDA firmware site.
Flash tool error
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
flash tool gives error S_ft download fail
i done it correct and i have that green tick mark but my phone still doesn't turn on sir.plz help me
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
nihal29 said:
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
Click to expand...
Click to collapse
Same here, used Flash tool and Firmwire as told by the OP
my computer detect phone and after some second it don't. this continuously happen
cant boot even after flashing
i tried your steps as is and the download come up ok but phone still dont show sign's of life please help
stuck on step 4
im stuck at step 4 the sp flash tool is not recognizing my device but on the devices and printers my phone states as mediatek da usb vcom (android) (com 5) please help, thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
usb error?
I recently flashed a rom onto my phone. I hard bricked it. I plugged it into my computer and it said it recognized my phone as a snapdragon qcomm processor. I unplugged it and plugged it back in. now my computer says it malfunctioned. Is there a fix for this. I really want my phone back and I know They won't repair it since I rooted it and flashed twrp.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
okay, can u please help me with the proper name of drivers required with their location in the file u provided.
i have these drivers installed, do i need any more: https://imgur.com/a/h8j7h.
Please reply ASAP
My computer detected my phone one and either stopped or just said usb device malfunctioned.
BaconBombz said:
My computer detected my phone one and either stopped or just said usb device malfunctioned.
Click to expand...
Click to collapse
Use the installer that automatically installs all the signed and signed drivers automatically. Will do the link when I find it.
I have firmware, but is it the right firmware?
`.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
So, a while ago I soft bricked my lg tribute, so I downloaded the firmware for an Lg tribute 2 consisting of a tot file and a dll file, the dll file is called lgupwebdl.dll, so I assume the firmware I have downloaded to my computer isn't the right one for my hardbricked lg tribute 2 (I'm really bad with devices I guess) since now I'm trying to unbrick my device with mediaTek and Sp flash tool. So, will the firmware I have right now cut it for mediaTek? If it won't, could you point me to the place where I could download the proper files to unbrick my device using mediaTek? Thanks!
I can't find the scatter file. Is there a specific kind of rom that has one or what?
No scatter file
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
iloveoreos said:
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
Click to expand...
Click to collapse
To flash using SP Flash Tool, you need a firmware package, not a custom rom. Every firmware package contains a scatter file in .txt extension. See attached image.
If you can't find scatter file. Maybe you got wrong firmware.
Ok, where should I get firmware package from? Phone is a Samsung galaxy s3 i9300 Canada. A bricked one. :silly:
Hello please help
I bricked my X620 when i tried to reset my phone so i'm now on red light button
My phone can't boot and it's inusable now
I tried with sp flash tool with a tutorial but failed
Please help me with the good rescue rom and method even more the good Drivers
thank you in advance
moyses said:
Hello please help
I bricked my X620 when i tried to reset my phone so i'm now on red light button
My phone can't boot and it's inusable now
I tried with sp flash tool with a tutorial but failed
Please help me with the good rescue rom and method even more the good Drivers
thank you in advance
Click to expand...
Click to collapse
See this video https: // www . youtube . com / watch?v=8wlnJOKISDM
(Delete spaces between address)
pap9488 said:
See this video https: // www . youtube . com / watch?v=8wlnJOKISDM
(Delete spaces between address)
Click to expand...
Click to collapse
Thank you for the replay
I tried those tutorial but not working for me
I tried since 4 days but not succeed
I thinks that the problem came from a bad usage of driver, despite i use those provided in the tuto
My resolution is never come to MTK devices
Please
Is there something to help me
No OS
I installed TWRP and mistakenly wiped some partitions.
I have unlocked bootloader and installed TWRP . I can enter fastboot. I am not getting how to install a working OS in it (Le x620) . I entered in TWRP and tried to mount OTG but could not select ( OTG (0 MB) ) . I tried https: // www . youtube . com / watch?v=8wlnJOKISDM (added spaces in the link) but didn't get anything when clicking Download.
Please help.