Hello to everyone , I just got an Galaxy S i9000 with froyo 2.2 on it and I can't get Downloading mode to work , I can enter in Downloading Mode but I receive an USB error - Unrecognized Device ... , I have installed Kies many times , Samsung Drivers on 64 and 32 bit (i got Windows 7 - 64 bit) , nothing worked , I don't know how to get rid of this stupid Firmware , my phone is also blocked on Orange , and can't unlock it until flashing CWM to root my phone , also my default kernel has that stupid "signed thing" options active and can't install update.zip files O_O , any solution how can I get my phone rooted at least 3 ?
ekzil said:
but I receive an USB error - Unrecognized Device ... ,
Click to expand...
Click to collapse
you can try USB solutions on MY Android Solutions, link below, and you can use rooters in My Android collections, link below
xsenman said:
you can try USB solutions on MY Android Solutions, link below, and you can use rooters in My Android collections, link below
Click to expand...
Click to collapse
OMFG , You made my day !! One of the Root'ers actually worked , I could kiss you 9999x times !! Thanks a LOT !
I managed to root the phone and unlock it , any idea how can I install CWM without ODIN , since my PC don't recognize the device and through Phone recovery mode it's not working , it says that the file it's not signed and **** ... 3
ekzil said:
I managed to root the phone and unlock it , any idea how can I install CWM without ODIN , since my PC don't recognize the device and through Phone recovery mode it's not working , it says that the file it's not signed and **** ... 3
Click to expand...
Click to collapse
well, it needs to be flashed with Odin, so resolve your connections problems, by patiently trying out the solutions in My Android Solutions
xsenman said:
well, it needs to be flashed with Odin, so resolve your connections problems, by patiently trying out the solutions in My Android Solutions
Click to expand...
Click to collapse
Install the samsung driver pack (search for it on xda) doesnt matter if pc does not recognise phone, ODIN will see it ...
PantherZA said:
Install the samsung driver pack (search for it on xda) doesnt matter if pc does not recognise phone, ODIN will see it ...
Click to expand...
Click to collapse
Only found Drivers for ICS , unfortunately I got 2.2 (froyo) :3
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
I can't able to flash because i get error after flash "checksum error",,can you please help me my phone is dead now,,,only i hear connection sound of usb,,other nothing show after flashing!!
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
Getting error.
For CheckSum Error
Try flashing with this file " Micromax_AQ4501_V9_29.08.14 " from XDA firmware site.
Flash tool error
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
flash tool gives error S_ft download fail
i done it correct and i have that green tick mark but my phone still doesn't turn on sir.plz help me
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
nihal29 said:
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
Click to expand...
Click to collapse
Same here, used Flash tool and Firmwire as told by the OP
my computer detect phone and after some second it don't. this continuously happen
cant boot even after flashing
i tried your steps as is and the download come up ok but phone still dont show sign's of life please help
stuck on step 4
im stuck at step 4 the sp flash tool is not recognizing my device but on the devices and printers my phone states as mediatek da usb vcom (android) (com 5) please help, thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
usb error?
I recently flashed a rom onto my phone. I hard bricked it. I plugged it into my computer and it said it recognized my phone as a snapdragon qcomm processor. I unplugged it and plugged it back in. now my computer says it malfunctioned. Is there a fix for this. I really want my phone back and I know They won't repair it since I rooted it and flashed twrp.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
okay, can u please help me with the proper name of drivers required with their location in the file u provided.
i have these drivers installed, do i need any more: https://imgur.com/a/h8j7h.
Please reply ASAP
My computer detected my phone one and either stopped or just said usb device malfunctioned.
BaconBombz said:
My computer detected my phone one and either stopped or just said usb device malfunctioned.
Click to expand...
Click to collapse
Use the installer that automatically installs all the signed and signed drivers automatically. Will do the link when I find it.
I have firmware, but is it the right firmware?
`.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
So, a while ago I soft bricked my lg tribute, so I downloaded the firmware for an Lg tribute 2 consisting of a tot file and a dll file, the dll file is called lgupwebdl.dll, so I assume the firmware I have downloaded to my computer isn't the right one for my hardbricked lg tribute 2 (I'm really bad with devices I guess) since now I'm trying to unbrick my device with mediaTek and Sp flash tool. So, will the firmware I have right now cut it for mediaTek? If it won't, could you point me to the place where I could download the proper files to unbrick my device using mediaTek? Thanks!
I can't find the scatter file. Is there a specific kind of rom that has one or what?
No scatter file
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
iloveoreos said:
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
Click to expand...
Click to collapse
To flash using SP Flash Tool, you need a firmware package, not a custom rom. Every firmware package contains a scatter file in .txt extension. See attached image.
If you can't find scatter file. Maybe you got wrong firmware.
Ok, where should I get firmware package from? Phone is a Samsung galaxy s3 i9300 Canada. A bricked one. :silly: