Database Develop

Help!

Im new in Flashing firmware via Flashtool. I read a thread about how to Flash FW via Flashtool. I follow every steps. I downloaded SE Stock Firmware From "htt*p://w*ww.mediafire.co*m/?d3pobqqc3py66#4c02265ox4l1r" there. It was a Zip format. I extract it and found 11 files.I put them in exact location. after that i follow the steps-
"""Start Flashtool and click the First icon: the "Lightning" icon [Flash]
Choose the required firmware from the list (if you have more than one ftf file in /firmwares folder you will see all of them in the list)
Click the OK button
the following screen will pop-up
1. Unplug the USB cabel from the phone (you can leave it plugged in the PC)
2. Turn off the phone
3. Press and hold the "Back" button on the phone
4. Plug in the USB cabel in the phone
5. Release the "Back" button after the above screen disappers
A flashing procedure will start...
Wait till Flashtool finishes flashing
The program will prompt you to power on your phone
Turn on "Uknown scources" and "USB Debugging" (in Settings/Applications/Development)""""
Everythings done and i found the output in flashtool-
""". . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . Fasing Finished.
. . . . . . Now unplug the device and power it on.
. . . . . . Then go application seting.
. . . . . . turn on unknown sources and debuging."""
But when i turn on my phone i found it still in my old rom KyuaDroid 2.3.5 :"(
what happened. pls reply. (sorry for my bad english)
I need to go back to stock rom because i want to unlock my bootloader.

itsShuvo said:
It was a Zip format. I extract it and found 11 files.I put them in exact location.
Click to expand...
Click to collapse
I looked at the file you linked to and that's not exactly a FTF file fit for Flashtool.
Use this one (2.1.1.C.0.0) instead.
Download and extract (7-Zip)! You should get a file with a FTF extension.
EDIT: Do NOT unpack the resulting FTF ... it needs to stay as a single FTF file!
itsShuvo said:
But when i turn on my phone i found it still in my old rom KyuaDroid 2.3.5
Click to expand...
Click to collapse
That most likely happened because the file you used wasn't really prepared as a Flashtool FTF bundle.
Repeat the procedure with the file from above and it should work.

thanks for reply. i will give it a try.
my Flashtool vesion is o.2.9. is it okay?

Solved!
Solved! Succesfully Flashed to Stock rom and Unlocked Bootloader! Its great thing for me i was afraid lol.

[TUT][Complete] How to flash stock (.Kdz) firmwares on LG p970 [Beginers]

Hi LG p970 Users
Here is the Lasest method of flashing .Kdz stock firmwares on your LG P970 !
Step by Step!
Do all Steps and make Sure attent to them!
Let Start
1 - if your phone has less than 30% charge take it to charge till it have More than 30%
2 - Download your phone drivers from Here and install them
3 - Download your desired Stock Firmware from Here (Thanks funhk)
4 - Download This Tool for Converting .Kdz firmwares to .fls & .bin : Download
5 - Place The .Kdz Firmware and Convert tool in a same folder
6 - Run the convertor tool and type "1" and press enter to start converting!
- Note : Converting by this tool have more than 1 Step ! let it to do all of them , Dont CLOSE it before than you see all of this stepe in this picture on your screen !
- Note: in last step you cant add CWM to your kernel , Type "N" and enter , adding CWM may cause of bricking Your device [Tnx diazao]!
- After Complete Converting You have 2 Files ( .bin and . fls)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7 - Download Smart Flash Tool from Here (password : bluedreams) and extract it to any where you want!
8 - This is IMPORTANT step
8,1 - Turn off Phone
8,2 - Make Sure Battery inserted
8,3 - Make Sure Simcard inserted
8,4 - Sd card is not important
8,5 - Hold Vol+ key
8,6 - Plug the USB cable while you are Holding Vol+ key
8,7 - See the " S/W Upgrade " on your phone screen
9 - Run the B_SmartFlashTool_Extern.exe with administrator rights ( Right click on it and then Run as administrator )
10 - Go to 2nd panel ( ROM copy D/L )
11 - In " Destination Binary File " section :
11,1 - Select .fls file in 1st line!
11,2 - Select .bin file in 2nd line!
12 - In " Select mode " section choose Normall mode
13 - In " Communication Setup " section :
13,1 - If your phone drivers installed correst you can see Com port and Comminucation driver if not those are empty !
13,2 - if you install the drivers in step 2 and it doesnt help
13,3 - connect your intrnet and unplog the phone and eject battery to turning off phone and then insert battery and do step 8
13,4 - and wait for installing drivers from internet
13,5 - check line 13,1
14 - When you saw Com port and Comminucation driver , can press Start for flashing !
15 - Wait for flashing done , when flashing done phone will restart automaticly !
16 - NOTE : Dont unplog USB cable or turn off your phone or PC or any other work that dissconnects phone from PC untill flashing Done !
17 - This is Very Important Step , Press Thanks if i helped you

why is it on the development section?
Sent from my LG-P970 using Xparent Green Tapatalk 2

baddiva said:
why is it on the development section?
Sent from my LG-P970 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Beginers usually check this section JUST

Patched ICS (v30X) firmware (KDZ) with CWM will BRICK your device!
So it just can be done with GB / Froyo (?)

diazao said:
Patched ICS (v30X) firmware (KDZ) with CWM will BRICK your device!
So it just can be done with GB / Froyo (?)
Click to expand...
Click to collapse
No...

Hi i just preformed this update on my phone as the lg updater was not working for me infact made my fone unusable... i downloaded uk latest version it install ics 4.0.4 works great expect i have no signal, infact its not registering my sim at all not asking for pin code and not displaying contacts. Any idea how to fix this? thanks

Habel69 said:
Hi i just preformed this update on my phone as the lg updater was not working for me infact made my fone unusable... i downloaded uk latest version it install ics 4.0.4 works great expect i have no signal, infact its not registering my sim at all not asking for pin code and not displaying contacts. Any idea how to fix this? thanks
Click to expand...
Click to collapse
Did you flash your phone, with SIM inserted, or not? Either way, try it tge other way around
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
Did you flash your phone, with SIM inserted, or not? Either way, try it tge other way around
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I flashed it with the sim card in. The person i bought it off from hong kong has agreed to send a repalcement if i send it back so im going to do this, im just unsure if i dare try update to ICS when i get the new one! im deffinatly not buying an LG phone again

Habel69 said:
Hi i just preformed this update on my phone as the lg updater was not working for me infact made my fone unusable... i downloaded uk latest version it install ics 4.0.4 works great expect i have no signal, infact its not registering my sim at all not asking for pin code and not displaying contacts. Any idea how to fix this? thanks
Click to expand...
Click to collapse
i think your phone chipset is not registered with your ****ry operator!

hi, i have a froyo 2.2.2 (v10a) can i use flashtool to flash V30B_12.2012(EU) (ics 4.0.4) ?

minor issue
1. I encountered a minor issue: 1st time I tried to flash, the windows cab expansion utility crashed. I moved the kdz and the extract tool into a folder on desktop and restarted and 2nd time went all ok. maybe it`s something with permissions on my system or a bug in windows cab utility.
2. After flashing all OK and phone rebooting, it takes 10-15 min for the phone to start (just this first time). Don`t do anything, just be patient and wait!
I posted this just for your information, if someone encounters the same problem.
---------- Post added at 11:03 AM ---------- Previous post was at 10:58 AM ----------
baddiva said:
why is it on the development section?
Sent from my LG-P970 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I think just because it`s not recommended for beginners to start experiencing flashing their phones That way, you have to look "deeper" and have to read and learn some more stuff before pressing START

HEEEELP
- Note: in last step you cant add CWM to your kernel , Type "N" and enter , adding CWM may cause of bricking Your device [Tnx diazao]!]
ok i just bricked one because it haved CWM preinstalled. What can I do?

cannot download stock rom
Hi,
I get this error when trying to download a stock firmware from this page: http://www.lg-phones.org/official-stock-lg-optimus-black-firmware-rom.html
Access Denied
You don't have permission to access "http://csmgdl.lgmobile.com/swdata/WDLSW/LGP970/ANEUTL/V10e_00/V10E_00.kdz" on this server.
Reference #18.245e0e17.1389953433.a2dc5e
Click to expand...
Click to collapse
Is there an alternative page?
I'm interrested in the V10e (EUROPE OPEN) stock rom.
Thanks
Philippe

filzip said:
Hi,
I get this error when trying to download a stock firmware from this page: http://www.lg-phones.org/official-stock-lg-optimus-black-firmware-rom.html
Is there an alternative page?
I'm interrested in the V10e (EUROPE OPEN) stock rom.
Thanks
Philippe
Click to expand...
Click to collapse
Sorry i dont have this files on my Lap and i cant upload it for you just search on net ...

This tutorial still works!
I would like to thank the author,
I followed steps describe here and its working flawlessly. Well done.!
Anyway, I tried the Stock Rom link you provided and they all show access denied, but I search and get the V30B from this link.
" h t t p : / / d - h . s t / z k U " (please remove "white space" then you get the correct link). Also in my case, first attemp to connect phone with SmartFlasher Tool didn't show COM PORT , but after (did exactly what suggest by the author) remove battery - then try again, it show COM PORT as expected. Press start -> wait 4:20 minutes and my phone start rebooting. After 2 more minutes all works well. :good: Sim OK, Signal OK, WIFI work, every thing looks perfect.!
Thanks again.

Bro the links for rom you posted are not working please post working links..........!

s.bluedreams said:
Hi LG p970 Users
Here is the Lasest method of flashing .Kdz stock firmwares on your LG P970 !
Step by Step!
Do all Steps and make Sure attent to them!
Let Start
1 - if your phone has less than 30% charge take it to charge till it have More than 30%
2 - Download your phone drivers from Here and install them
3 - Download your desired Stock Firmware from Here
4 - Download This Tool for Converting .Kdz firmwares to .fls & .bin : Download
5 - Place The .Kdz Firmware and Convert tool in a same folder
6 - Run the convertor tool and type "1" and press enter to start converting!
- Note : Converting by this tool have more than 1 Step ! let it to do all of them , Dont CLOSE it before than you see all of this stepe in this picture on your screen !
- Note: in last step you cant add CWM to your kernel , Type "N" and enter , adding CWM may cause of bricking Your device [Tnx diazao]!
- After Complete Converting You have 2 Files ( .bin and . fls)
7 - Download Smart Flash Tool from Here (password : bluedreams) and extract it to any where you want!
8 - This is IMPORTANT step
8,1 - Turn off Phone
8,2 - Make Sure Battery inserted
8,3 - Make Sure Simcard inserted
8,4 - Sd card is not important
8,5 - Hold Vol+ key
8,6 - Plug the USB cable while you are Holding Vol+ key
8,7 - See the " S/W Upgrade " on your phone screen
9 - Run the B_SmartFlashTool_Extern.exe with administrator rights ( Right click on it and then Run as administrator )
10 - Go to 2nd panel ( ROM copy D/L )
11 - In " Destination Binary File " section :
11,1 - Select .fls file in 1st line!
11,2 - Select .bin file in 2nd line!
12 - In " Select mode " section choose Normall mode
13 - In " Communication Setup " section :
13,1 - If your phone drivers installed correst you can see Com port and Comminucation driver if not those are empty !
13,2 - if you install the drivers in step 2 and it doesnt help
13,3 - connect your intrnet and unplog the phone and eject battery to turning off phone and then insert battery and do step 8
13,4 - and wait for installing drivers from internet
13,5 - check line 13,1
14 - When you saw Com port and Comminucation driver , can press Start for flashing !
15 - Wait for flashing done , when flashing done phone will restart automaticly !
16 - NOTE : Dont unplog USB cable or turn off your phone or PC or any other work that dissconnects phone from PC untill flashing Done !
17 - This is Very Important Step , Press Thanks if i helped you
Click to expand...
Click to collapse
This is great! It works!
For those who are looking for stock ROM, you can access here where it was found in other thread from XDA

i have followed all steps, and flashing done correctly, but why my phone stuck on LG logo? any idea how to solve this? thanks

!!!
as when as go to the startin flashin give eror that is stoped
and when i run flashtool it say that cant find model.dll
what can i do?

Flash it againn
kamiar1370 said:
as when as go to the startin flashin give eror that is stoped
and when i run flashtool it say that cant find model.dll
what can i do?
Click to expand...
Click to collapse
Flash it again and be careful to select proper files

Blue Light flash

Hey all,
I have Zuk z2pro z2121. I wanted more than stock ROM so I downloaded zui 2.5.344. I unlocked bootloader n rooted my phone as well as installed TWRP. "Tool All in one" PC software helped me to carry out above with ease.
While playing around I clicked "Lock Bootloader" and phone got switched off with indicating continuous blue light. I tried pressing vol down + power + Home button, and several other combination but didn't help. When I pressed power button for long, I got Zuk logo onscreen with a white flash on indicator for 1 sec and then again the blue light indicator.
After a little RnD after pressing power button till I got white flash for 3 times and the blue light got completely off. I don't know what to do further. I have backup of my boot , recovery and ROM. Kindly suggest.
Shoaib

Press and hold volume - and power . Release power, after vibration you can release the volume -. You will be in that menu https://ibb.co/f3vOHm . Go to device manager and check if pc recognize your phone https://ibb.co/bHqZOR . Open CMD in adb folder and write adb devices https://ibb.co/cwCg3R . Then adb reboot edl . You are i EDL https://ibb.co/cvjiHm . Use Qfil to flash stock rom

Didn't work...
Thanks for responding. As said, tried pressing Vol + Power and never got any vibrations. Tried Up vol + power, tried Down vol + power. No vibrations.
When I press power button with any combination, this is what happens,
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
Still keeping power button pressed
After approx 7-8 secs - same as above
Still keeping power button pressed
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
But now after this third time of flash, blue light appears and after 4-5 secs disssappears. If I leave the button only at this time, the blue light doesn't comes back.
If I leave the power button before or after this sequence, the blue light doeanon the indicator doesn't goes off at all.

What is happening when you connect phone with pc ? Is there any reaction ?

No reaction from PC.
I tried connecting to PC, earlier Tool all in one immediately use to detect, n now there is no response from the PC or the software after making USB connection.

Sir,
As I said earlier, I clicked lock bootloader, n when the screen went off, I disconnected the phone from PC. There is a possibility of the boot partition getting damaged or so. Kindly assist.
Rgds

There aren't any ways to enter in fastboot or recovery , even in service menu . I think you should try deep flash cable to enter in EDL .

Will do as u say. Just one last thing, when I checked device manager in my PC, it showed the phone as other devicez "QUSB XXXX". Question is,
1. Any possibilities of recovery without going for a deep flash, as I got to learn it first.
2. Other part is, my phones battery seems to be drained now. So, it won't be a problem for a deep flash.

Could you give some print screen ?

The matter is that you must switch your phone to edl . Try this yet . Your phone must be turn off .
Press only volume up button for 10 sec and while keeping it pressed,connect phone to PC . Hold volume up until your PC finds a new hardware . It should be android phone - ShenQi composite adb interface . If it doesn't work I have no more ideas apart from df cable . This cable works on Zuk z2 and I think it should works on our Zuk z2 pro

Sir,
I managed to connect the phone via USB as 9008. Miflash not supporting my ROM. Will download Stock ROM n then try with QFIL and MiFlash as well. Thanks for all your support. Will keep u posted about the progres. XML file is not found in any ROMs I have. Miflash some error also but detecting the device. Is there any other tool similar to Miflash, which I can try..
Rgds

First use QPST/Qfil . Follow this guide https://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Do all steps .

Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds

DrTahseen said:
Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds
Click to expand...
Click to collapse
U need ufs flash not emmc. Change programmer in qfil.

I have a some experience with miflash but I use it for xiaomi . I've never flashed my zuk z2 pro by miflash . If you want to use miflash use 2016.03.30 and run it on PC with win 64 . Create a folder on c: for example "zuk" and copy to that all contents of unrar Qpst/Qfil zui rom . If you have Qualcomm hs usb 9008 that means your phone is in edl ( download mode ) . Good luck

I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards

It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors

DrTahseen said:
I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards
Click to expand...
Click to collapse
Did u use ufs flash in qfil instead of emmc?

Starchm said:
Did u use ufs flash in qfil instead of emmc?
Click to expand...
Click to collapse
Yups !!! I already did with Meta Build Type selection. Didnt Help. I tried to search for mbn file also to try emmc but cudnt find so was stuck with ufs....

mar.ur said:
It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors[/QUOTE
https://forum.xda-developers.com/attachment.php?attachmentid=4339940&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339941&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339942&stc=1&d=1511421690
Click to expand...
Click to collapse

Le X620 brick

Hello please help
I bricked my X620 when i tried to reset my phone so i'm now on red light button
My phone can't boot and it's inusable now
I tried with sp flash tool with a tutorial but failed
Please help me with the good rescue rom and method even more the good Drivers
thank you in advance

moyses said:
Hello please help
I bricked my X620 when i tried to reset my phone so i'm now on red light button
My phone can't boot and it's inusable now
I tried with sp flash tool with a tutorial but failed
Please help me with the good rescue rom and method even more the good Drivers
thank you in advance
Click to expand...
Click to collapse
See this video https: // www . youtube . com / watch?v=8wlnJOKISDM
(Delete spaces between address)

pap9488 said:
See this video https: // www . youtube . com / watch?v=8wlnJOKISDM
(Delete spaces between address)
Click to expand...
Click to collapse
Thank you for the replay
I tried those tutorial but not working for me
I tried since 4 days but not succeed
I thinks that the problem came from a bad usage of driver, despite i use those provided in the tuto
My resolution is never come to MTK devices

Please
Is there something to help me

No OS
I installed TWRP and mistakenly wiped some partitions.
I have unlocked bootloader and installed TWRP . I can enter fastboot. I am not getting how to install a working OS in it (Le x620) . I entered in TWRP and tried to mount OTG but could not select ( OTG (0 MB) ) . I tried https: // www . youtube . com / watch?v=8wlnJOKISDM (added spaces in the link) but didn't get anything when clicking Download.
Please help.

MTP Not Working

Hey guys ,
So , suddenly mtp on my lenovo k3 note stopped working . I have reset my phone but still no luck . I want to install twrp . So , I downloaded sp flash tool and twrp image with scatter file and installed lenovo drivers .
I have developer options and usb debugging enabled . The type of usb connection in developer options is MTP .
I opened sp tools hit the download button ( checksum checkbox checked in options menu ) , turned off my phone and connected .
Instead of flashing , the phone started charging .
OS on my PC is Windows 10 x64 latest update , the phone is on s327