hi
can any one kindly give me some guidance on how to use the SUTL i did try it but it did not detect my phone kindly advise on what i need to do for the same
what i did
put my phone in the download mode ie VOLUME+POwer, then activated the SUTL on my Laptop and connected the phone did as per the instructions but it kept saying no phone connected. Kindly advise on the same sorry if this has been given i did search and could not find the same
I had some problem with my phone yesterday and took it to service all he did was re flash the OS via SUTL and the problem got solved
haree said:
hi
can any one kindly give me some guidance on how to use the SUTL i did try it but it did not detect my phone kindly advise on what i need to do for the same
what i did
put my phone in the download mode ie VOLUME+POwer, then activated the SUTL on my Laptop and connected the phone did as per the instructions but it kept saying no phone connected. Kindly advise on the same sorry if this has been given i did search and could not find the same
I had some problem with my phone yesterday and took it to service all he did was re flash the OS via SUTL and the problem got solved
Click to expand...
Click to collapse
Check if you have installed SUTL properly. It works as any windows application. second check if you have necessary admin rights on your laptop. You phone device should first be detected in the download mode as 'FIH' and should be visible in "My computer'. You should be able to browse thorugh and see the Image folder. If this is not happening check device manager on windows and see if your device drive has been diabled - Rightclick My Computer, Properties, Device Manager, On the top you will see "Qualcomm....", If it is diabled, right click and enable it.
Check in anoher laptop/desktop. I have had no issues with SUTL been installing stock using this now so many times...
vijayar said:
Check if you have installed SUTL properly. It works as any windows application. second check if you have necessary admin rights on your laptop. You phone device should first be detected in the download mode as 'FIH' and should be visible in "My computer'. You should be able to browse thorugh and see the Image folder. If this is not happening check device manager on windows and see if your device drive has been diabled - Rightclick My Computer, Properties, Device Manager, On the top you will see "Qualcomm....", If it is diabled, right click and enable it.
Check in anoher laptop/desktop. I have had no issues with SUTL been installing stock using this now so many times...
Click to expand...
Click to collapse
hi
thanks i can see the file and all but let me also do all the cheks u have mentioned and ill keep u posted
ONE question USB Debugging on or OFF while USING SUT
haree said:
hi
thanks i can see the file and all but let me also do all the cheks u have mentioned and ill keep u posted
ONE question USB Debugging on or OFF while USING SUT
Click to expand...
Click to collapse
USB debugging ?!...It is irrelevant, you are on download mode which is outside the Android System !
vijayar said:
USB debugging ?!...It is irrelevant, you are on download mode which is outside the Android System !
Click to expand...
Click to collapse
hi
thanks buddy by the way im not having problem flashing an .nb0 via stock recovery using the phone
and more thing sorry i forgot do i need to rename the file to .nb0 or can i use the original file for example like the file you get from Spice Indian site ie it says
FB0-318B-0-5012-A01.nb0 - do i use this extracted file direct on the Sut or do i need to rename it to firmware.nb0 and then use it
thanks in advance
haree said:
hi
thanks buddy by the way im not having problem flashing an .nb0 via stock recovery using the phone
and more thing sorry i forgot do i need to rename the file to .nb0 or can i use the original file for example like the file you get from Spice Indian site ie it says
FB0-318B-0-5012-A01.nb0 - do i use this extracted file direct on the Sut or do i need to rename it to firmware.nb0 and then use it
thanks in advance
Click to expand...
Click to collapse
Yes you need to rename the file to "firmware.nb0".
I think renaming the file to 'firmware ' is unnecessary while using SUT to flash a nb0 file... it is required for flashing thru stock recovery as far as I remember
mi410 said:
I think renaming the file to 'firmware ' is unnecessary while using SUT to flash a nb0 file... it is required for flashing thru stock recovery as far as I remember
Click to expand...
Click to collapse
My oversight !!!!...MI410 is right, not mandatory to rename the file to firmware while updating via SUTL - I have by default kept it renamed as firmware in my comp so that I don't miss out this aspect if updating via SD card !
mi410 said:
I think renaming the file to 'firmware ' is unnecessary while using SUT to flash a nb0 file... it is required for flashing thru stock recovery as far as I remember
Click to expand...
Click to collapse
vijayar said:
My oversight !!!!...MI410 is right, not mandatory to rename the file to firmware while updating via SUTL - I have by default kept it renamed as firmware in my comp so that I don't miss out this aspect if updating via SD card !
Click to expand...
Click to collapse
hi
just fyi all these days i have flashed the official OS via stock recovery and recently wen i tried the CM7 and went back both via CWM and stock recovery i had the screen lag problem so i had to take to service and get the issue resolved all he did was flash via SUT and i have never used SUT is why i asked for guidance thanks again guys it was very nice of you most obliged for the same i have thanked u on ur post but still wanted to say it again
Thanks got it working
hi
i installed 1.7.2 version of SUTL and it was working fine i was able to flash the official Indian rom via the same
once again thanks for ur kind help regarding the same
Sorry for this thread.
MY ENGLISH NOT GOOD. :crying:
I Follow " http://forum.xda-developers.com/showthread.php?t=2392865 ".
1. Flash 10.1.1.A.1.310 with all Wipes using flashtools (All data will be erased.)
2. Obtain Root using the toolkit.
3. Flash this Recovery to your device.
4. Download the System only Rom and put it on the sd-card.
5. Go into Recovery (when the press "Volume up" when the blue LED lights up)
6. Search for the previously downloaded System only Rom file and flash it in CWM recovery .
7. Boot into flash mode (when booting from USB-connected cable to press "Volume down")
8. Flash 10.3.1.A.0.244 through FlashTool without system (tick the box Exclude) / / After loading you will have the new firmware./ /
9. Flash Recovery again.
10. Download the latest version SuperSU (at the bottom of the link to the zip file), add this file to the sd-card.
11. Go into Recovery, flash the archive SuperSU / / After loading you will have the new firmware with the normal working Root privileges./ /
I have proplem with step 7 and 8.
In step 6. I setup Rom from SD Card and reboot and Unplug the device.
When My phone Reboot. I open Flashtool -> Selec Firmware Russ 10.3.1.A.0.244 -> UnTick DATA, CACHE, APPSLOCK and tick all the box Exclude -> Click Flash -> Press Volume down my phone + Plug USB cable with Laptop -> When Flash Finish, Unplug device and press PoWer .... My phone die on LOGO sony.
Help me PLS.
IF Thread not post here, i sorry admin. => New member.
Anyone help me..?
Help me pls..!!!!1 :crying:
SonyZR said:
Help me pls..!!!!1 :crying:
Click to expand...
Click to collapse
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:
Normal
jackman17 said:
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:
Click to expand...
Click to collapse
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.
SonyZR said:
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.
Click to expand...
Click to collapse
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?
Yes.
jackman17 said:
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?
Click to expand...
Click to collapse
Do you have try my tutorial.?
If my tutorial not success
And you can not login logo sony
I think your phone has brick. You need go to warranty center.
tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:
jackman17 said:
tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:
Click to expand...
Click to collapse
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.
djpeesh said:
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.
Click to expand...
Click to collapse
fastboot is the second option in my flashtool menu, which should i choose?
ps and should I leave battery out?
THANK YOU DJpeesh,
you saved my day:fingers-crossed::fingers-crossed:
followed your instructions ( 1e option flashmode with battery still removed ) an successfuly flashed phone.
I think it went wrong when I flashed boot.img file from cmw recovery with fastboot from cl when phone was also still connected throw Flashtool.
I use all linux tools (flashtool, adb, fastboot , doomlord-rooting kit)
ps By your opinion, is it still save to follow intructions on the link in my first post to get my xperia zR on latest firmware and have root access?
Jackman17. Try updating through Sony update service and then use vroot (can send you thread link later).
I'm running 4.2.2 and I'm rooted.
Sent from my C5502 using Tapatalk 4
Hi everyone....
I've created this thread asking for help ... but as my issue is solved, I'd like to share the glory with u ..
The ZR root after the automatic update to 4.4.4 is really tricky ...
this is how i got this minutes ago ..
First of all ….
1- install the ADB-Drivers … There is no ZR drivers,,, so install all the Z drivers to make sure…
U will find a file called "Flashtool drivers" ... the first download in this page ...
http://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
2- download the kernels from the post 35#:
http://forum.xda-developers.com/xperia-zr/general/guide-how-to-root-10-5-1-0-283-t2873841/page4
put it in the folder "Firmware" in ur flashtool folder..
3- Enable the USB-Debugging from the developers options (by clicking the Build-Number many times) so u will have the developers options..
4- connect the device in “Flashmode” by connecting the cable to it while holding the Vol down .
5- run the Flashtool. install the kernel 230.tft using the “Flashmode” without changing anything…
After this ,,, restart ur ZR and root it using “Towelroot” from its website …. Wi-Fi will not work. it is ok....
6- Done? check root (using root checker from the google play) if it is ok turn ur ZR off …
7- connect it again in “Flashmode” and install the kernel 283.tft ….
finished ? restart and everything will work perfect … thanks to the great developers of XDA ..
Error_Rebel said:
Hi everyone....
I've created this thread asking for help ... but as my issue is solved, I'd like to share the glory with u ..
The ZR root after the automatic update to 4.4.4 is really tricky ...
this is how i got this minutes ago ..
First of all ….
1- install the ADB-Drivers … There is no ZR drivers,,, so install all the Z drivers to make sure…
U will find a file called "Flashtool drivers" ... the first download in this page ...
http://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
2- download the kernels from the post 35#:
http://forum.xda-developers.com/xperia-zr/general/guide-how-to-root-10-5-1-0-283-t2873841/page4
put it in the folder "Firmware" in ur flashtool folder..
3- Enable the USB-Debugging from the developers options (by clicking the Build-Number many times) so u will have the developers options..
4- connect the device in “Flashmode” by connecting the cable to it while holding the Vol down .
5- run the Flashtool. install the kernel 230.tft using the “Flashmode” without changing anything…
After this ,,, restart ur ZR and root it using “Towelroot” from its website …. Wi-Fi will not work. it is ok....
6- Done? check root (using root checker from the google play) if it is ok turn ur ZR off …
7- connect it again in “Flashmode” and install the kernel 283.tft ….
finished ? restart and everything will work perfect … thanks to the great developers of XDA ..
Click to expand...
Click to collapse
Hey do you need an unlocked bootloader or is it fine to do it with a locked bootloader?
with a stock device ... u do nothing before this ... this is what I did and it works
This a pretty old thing
Mentioned several times on our forum
Tapped from my furious ZR
hi guys . i own a xperia z1 c6902 which since this morning has stuck to showing sony logo and restarting . i tried to install twrp recovery from another source and it happen . the computer gives sound while connecting and disconnecting and when i goto adb and hit adb devices command , it is shown . i installed twrp today morning and had this problem . iam currently on 5.0.2 and had downloaded 5.1.1 firmware but after i try to flash it with flashtool , it is showing me a " device selector " window . I have installed all drivers according to instructions and my phone is shown in flashboot mode also in flashboot but flashing cannot start . when i click cancel in device selector window , it says " no loader found " [ screenshot ] there is no exclamation in device manager too so iam sure all correct drivers are installed . i have attached a screenshot . please help me bring my phone to life asap
Try flashtool's different, or, latest version, cannot see which version you re using on SS
techfreak.rawmess said:
hi guys . i own a xperia z1 c6902 which since this morning has stuck to showing sony logo and restarting . i tried to install twrp recovery from another source and it happen . the computer gives sound while connecting and disconnecting and when i goto adb and hit adb devices command , it is shown . i installed twrp today morning and had this problem . iam currently on 5.0.2 and had downloaded 5.1.1 firmware but after i try to flash it with flashtool , it is showing me a " device selector " window . I have installed all drivers according to instructions and my phone is shown in flashboot mode also in flashboot but flashing cannot start . when i click cancel in device selector window , it says " no loader found " [ screenshot ] there is no exclamation in device manager too so iam sure all correct drivers are installed . i have attached a screenshot . please help me bring my phone to life asap
Click to expand...
Click to collapse
I think flashing the twrp corrupted your bootloader. Was it meant for another device?
goztepe said:
Try flashtool's different, or, latest version, cannot see which version you re using on SS
Click to expand...
Click to collapse
thanks , using a newer version solved the problem
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
I can't able to flash because i get error after flash "checksum error",,can you please help me my phone is dead now,,,only i hear connection sound of usb,,other nothing show after flashing!!
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k"]https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone back . If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone .
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
Getting error.
For CheckSum Error
Try flashing with this file " Micromax_AQ4501_V9_29.08.14 " from XDA firmware site.
Flash tool error
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
flash tool gives error S_ft download fail
i done it correct and i have that green tick mark but my phone still doesn't turn on sir.plz help me
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial from fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Click to expand...
Click to collapse
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
nihal29 said:
i got BROM ERROR : S_CHECKSUM_ERROR(1041)
help me please . i have karbonn sparkle v
Click to expand...
Click to collapse
Same here, used Flash tool and Firmwire as told by the OP
my computer detect phone and after some second it don't. this continuously happen
cant boot even after flashing
i tried your steps as is and the download come up ok but phone still dont show sign's of life please help
stuck on step 4
im stuck at step 4 the sp flash tool is not recognizing my device but on the devices and printers my phone states as mediatek da usb vcom (android) (com 5) please help, thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
usb error?
I recently flashed a rom onto my phone. I hard bricked it. I plugged it into my computer and it said it recognized my phone as a snapdragon qcomm processor. I unplugged it and plugged it back in. now my computer says it malfunctioned. Is there a fix for this. I really want my phone back and I know They won't repair it since I rooted it and flashed twrp.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
okay, can u please help me with the proper name of drivers required with their location in the file u provided.
i have these drivers installed, do i need any more: https://imgur.com/a/h8j7h.
Please reply ASAP
My computer detected my phone one and either stopped or just said usb device malfunctioned.
BaconBombz said:
My computer detected my phone one and either stopped or just said usb device malfunctioned.
Click to expand...
Click to collapse
Use the installer that automatically installs all the signed and signed drivers automatically. Will do the link when I find it.
I have firmware, but is it the right firmware?
`.
henryjack1995 said:
Hi guys , finally i came up with solution to revive your Android one device from dead . ( yeah u have heard me right )
Please read this tutorial fully don't skip anything in between and have patience .
My phone : Micromax AQ4501
What you need ?
* MTK device drivers https://drive.google.com/open?id=0BwbnsFYGZUGcdTduWkpLVjhTR1k
* SP flash tool latest ( v5.1604 recommended)
* Stock Rom for your Device ( I've used Micromax_AQ4501_V9_29.08.14 from XDA Firmware )
This tutorial is only for Hard Bricked Devices .
Want to know whether your phone is hard bricked ? Answer this following questions ...
1 . Your Phone doesn't turn on . (Even charging symbol won't be shown).
2 . No matter how many times you flash it , it won't work .
One last thing :
Your phone must be detected in computer , atleast connecting sound . If not your Motherboard is dead ( I'm sorry , i can't help you in this )
Firstly install required drivers for phone ,
Your Phone requires two drivers , Preloader driver and VCOM driver ( most of you already have it if not i've provided the link above :fingers-crossed: ) and remove your phone's battery .
DON'T CONNECT YOUR PHONE ( ! IMPORTANT)
STEP : 1 -- Open your SP Flash tools , goto options , then select download , Tick two checksum ( USB and Storage ) .
STEP : 2 -- Now select your location of Scatter file ( available in Stock ROM folder ) .
STEP : 3 -- Goto Format menu and select Auto format flash and press start .
STEP : 4 -- Now connect your phone (press volume down button and connect with battery). If you installed drivers connectly , then sp tools will detect your phone and it will format it .
STEP : 5 -- Disconnect your phone . select " Download only " Option . Press Download and again connect your phone without battery.
STEP : 6 -- Patience , it will finish and Display " OK " with Green box .
Voila ! I've have just revived your phone ! . Your 90% done . Once u turn it on ,
You will find two bugs
1 . No IMEI numbers
2 . NVRAM problem ( Wifi error )
Search through XDA for solution for these two , people has solution for these .
If my solution works for you , say thanks in comment below it means alot to me hearing from you
Further queries ? Feel free to ask i'll help you whenever i can .
Known Problems and Solution .
Check Sum Error : It means your firmware has some errors . Try with other stock firmware for your device.
If you are getting errors , after flashing try holding VOLUME DOWN throughout the download process till green box appears.
One thing turn off internet while doing driver installation because your windows will update the driver and it cause your phone not being detected by SP tools.
To remove old driver . Goto Device Manager and Connect your phone in META . Preload Device will be displayed . Quickly right click on it uninstall.
Click to expand...
Click to collapse
So, a while ago I soft bricked my lg tribute, so I downloaded the firmware for an Lg tribute 2 consisting of a tot file and a dll file, the dll file is called lgupwebdl.dll, so I assume the firmware I have downloaded to my computer isn't the right one for my hardbricked lg tribute 2 (I'm really bad with devices I guess) since now I'm trying to unbrick my device with mediaTek and Sp flash tool. So, will the firmware I have right now cut it for mediaTek? If it won't, could you point me to the place where I could download the proper files to unbrick my device using mediaTek? Thanks!
I can't find the scatter file. Is there a specific kind of rom that has one or what?
No scatter file
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
iloveoreos said:
I got sp flash and the rom for my phone downloaded, but i can't find any scatter file. Is there specific roms that have them or what?
Click to expand...
Click to collapse
To flash using SP Flash Tool, you need a firmware package, not a custom rom. Every firmware package contains a scatter file in .txt extension. See attached image.
If you can't find scatter file. Maybe you got wrong firmware.
Ok, where should I get firmware package from? Phone is a Samsung galaxy s3 i9300 Canada. A bricked one. :silly: