Database Develop

Very Stuck in Sony Ericson x8

i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.

Vlackrs said:
i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.
Click to expand...
Click to collapse
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.

smyth12 said:
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.
Click to expand...
Click to collapse
GingerDX i have installed before this problem, i will try to do what you say, brb

Vlackrs said:
GingerDX i have installed before this problem, i will try to do what you say, brb
Click to expand...
Click to collapse
After re-rooting your phone you can once again install GingerDX.. Just don't mess with settings you're not sure of

PC companion not work cuz i cant boot my phone =( im stuck in sony ericson, and where i can find SUES? ty

SEUS is no longer available... you have to plug your phone into the computer, remove the battery, on PC companion it will say "Repair this phone" in small lettering, click that then with your phone connected to the computer via USB hold the back button and put your battery in, this will put your phone into Flash mode and allow PC companion to repair your phone

i love you dude, thank you, i will not mess up again with that XD, btw i have a year using this website is awesome, i was trying to learn more about Xrecovery and CWM ty!!

What do you mean you have a gear using this website?
CWM and Xrecovery can be dangerous..
No problem!

haha my bad, "year", btw PC companion cant find a software to install, right now im talking to Sony ericson.
i think cuz i have other baseband =S

Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..

yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways

Vlackrs said:
yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways
Click to expand...
Click to collapse
There still is a way to fix the phone using PC companion, the baseband doesn't matter.. as far as I know, don't quote me on that... hmm.. When I think of something I will let you know

Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.

ty, and ive trying to fix it but nop, nothing.

smyth12 said:
Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..
Click to expand...
Click to collapse
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk

B.Jay said:
Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.
Click to expand...
Click to collapse
awesome i will try this!!! i will reply later.

taaviu said:
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
im the problem not "smyth12", but i cant do anything not even get into my xrecovery, i think what i did was unmount the file system using recovery by error, or some important file to boot at least with Xrecovery.

@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!

Vlackrs said:
@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!
Click to expand...
Click to collapse
You're welcome mate.
Remember to keep the instructions and required files save in case you manage to soft-brick the device again.

i dont understand this .

[Q] cannot root with v20c

Hello,
Last week i updated my phone throw the official LG PC suit to v20c 4.1.2, and i tried to root the phone throw that:
1st: i read this topic http://forum.xda-developers.com/showthread.php?t=1818502 and downloaded the recommended tools but when i tried to install
IS11LG_SystemBackupTest.signed.apk it said " unfortunitly an error occured " so this made me not to complete the steps
2nd: i tried this topic http://forum.xda-developers.com/showthread.php?t=2230934 but also it did not work !!!!!
so i wanna know my options now because i wanna to root it the fastest way as i can >>> some info from phone
Android version : 4.1.2
Kernel version : 3.1.10
Software version : p88020c-ame-xxx​

do you have the correct driver installed on your pc?
Sent from my tf101

arrivals18 said:
Hello,
Last week i updated my phone throw the official LG PC suit to v20c 4.1.2, and i tried to root the phone throw that:
1st: i read this topic http://forum.xda-developers.com/showthread.php?t=1818502 and downloaded the recommended tools but when i tried to install
IS11LG_SystemBackupTest.signed.apk it said " unfortunitly an error occured " so this made me not to complete the steps
2nd: i tried this topic http://forum.xda-developers.com/showthread.php?t=2230934 but also it did not work !!!!!
so i wanna know my options now because i wanna to root it the fastest way as i can >>> some info from phone
Android version : 4.1.2
Kernel version : 3.1.10
Software version : p88020c-ame-xxx​
Click to expand...
Click to collapse
IS11LG_SystemBackupTest.signed.apk ____> 4.0.x You can root V10 with this apk.
Tool all in one for 4.1.2
if you want to root your phone with tool.
Shut down your phone then press Volume down and power. Open the recovery mode and select adb sideload.
Tools will make your phone root.

momothecat said:
do you have the correct driver installed on your pc?
Sent from my tf101
Click to expand...
Click to collapse
Don't know i actually used the drivers in AIO tool first but after failed i used the drivers on LG site Also failed

barscenk said:
IS11LG_SystemBackupTest.signed.apk ____> 4.0.x You can root V10 with this apk.
Tool all in one for 4.1.2
if you want to root your phone with tool.
Shut down your phone then press Volume down and power. Open the recovery mode and select adb sideload.
Tools will make your phone root.
Click to expand...
Click to collapse
failed!!
i will tell u what i did
1- connected device and choose battery mode
2- shut down
3- pressing power button and vol- together
4- after the recovery mode appeared selected the second choice wich is " upgrade adb"
5- open all in one tool as admin.
6-choose 1 "root"
7- it said error device not found !!!!!!!!!!!!!!!!
remember from info above i am not EUR-XXX i am AME- XXX

Quite surprising someone tried to root V20x using V10x's method / exploit.
Try this method:
http://forum.xda-developers.com/showthread.php?t=2180688

arrivals18 said:
failed!!
i will tell u what i did
1- connected device and choose battery mode
2- shut down
3- pressing power button and vol- together
4- after the recovery mode appeared selected the second choice wich is " upgrade adb"
5- open all in one tool as admin.
6-choose 1 "root"
7- it said error device not found !!!!!!!!!!!!!!!!
remember from info above i am not EUR-XXX i am AME- XXX
Click to expand...
Click to collapse
I am AME-xx too
Check your device manager, you will see unknown device named LGP880 ( In recovery Mode )
Use AdbDriverInstaller at attached for install Lg driver.
Then Try again adbsideload.

L2Deliver said:
Quite surprising someone tried to root V20x using V10x's method / exploit.
Try this method:
http://forum.xda-developers.com/showthread.php?t=2180688
Click to expand...
Click to collapse
thanx thanx my friend it really works much easier than i thought
so thax ,thanx ,thanx and >>>>>>>>>>>>>>>>>>>>>> thanks BUTTON

Thank You guys .. all of u

[Q] Help with root

Hi,
Just got my new ZR and it came with 10.3.1.A.0.244
I need to root, so I can restore my app's data from my old phone (Xperia SOLA) via Titanium.
I started by following this thread and doing as advised:
- install USB drivers (Z, A, fastboot and flashmode)
- change USB mode to MSC
- activate debug over USB
- install Flashtool (upgrade in my case)
- restart phone in flash mode
- use flashtool to flash XperiaZ_C660X_KernelOnly_10.3.A.0.423_Generic_NL.ftf
- flashtool says it succeeds, to remove cable and start phone
That's where it gets stuck! The phone doesn't wake up. I remove the battery, press the power button for a couple of seconds and it vibrates and ... nothing else. If I hook the phone into FlashTool, it says the phone is in flash mode.
I've tried flashing the XperiaZ_C660X_KernelOnly_10.3.1.A.0.244_BE.ftf, but nothing works.
I bring the phone back alive by using SUS, but I'm back where I started. I've done this 3 times, and redownloaded the FTF 2 times.
What am I doing wrong? I'm still on locked bootloader. The phone has less than 24 hours... hasn't seen water yet :cyclops:
Wanted to test a couple of things, before voiding my warranty!!
If anyone has any ideas/sugestions, I'd love to hear them!
Hajah

Dude, XZR is C550X, you're flashing C660X which is XZ's kernel...
Follow the instruction here for root in 4.1.2 -> http://forum.xda-developers.com/showthread.php?t=2384590
If you're on 4.2, you can try follow here but it seems still buggy -> http://forum.xda-developers.com/showthread.php?t=2387008

Hi,
I see now where I got mislead... (n00b)
As I see it, no valid method to get root on 4.2!
Can I flash 4.1.2 on my locked bootloader? And where do I find the correct ROM image for my C5503?
Thanks again!
------------
Found it! It was hiding behind a spoiler box in the 4.2 thread
Hajah, the C5503 n00b

try
try using doomlord rooting kit download it and connect your phone to your computer install driver if you want start doomlord press any key to continue it will automaticaly restart when it has finished

Yes, you can flash any firmware without unlocking your bootloader.
You can get all 4.1 and 4.2 stock ROM from different region in this thread
http://forum.xda-developers.com/showthread.php?t=2384512
You can try to root your 4.2 using the method, some reported to be successful.

did it work
did it work dude cause it works on all devices:fingers-crossed:

tam Esument
is there a quick and easy method to check if the bootloader is unlocked or not?

See this post.

[Q] How To Root Bell Sony Xperia T LT30a W/LB Using FW/9.2.A.0.295

To Whom It May Concern...
Yesterday, I updated my Bell Sony Xperia T LT30a W/LB using FW/9.2.A.0.295. This update removed my Root Access. I haven't been successful using Bin4ry v33 to restore my Root Access.
Please provide me with step by step instructions on how to ReRoot my subject phone/firmware. Currently I have very limited App access since I was using Link2SD and without Root almost all my Apps are missing
Appreciated...Rasher0123

currently the only way to have root on 4.3 is to downgrade to 4.1, then root, flash CWM for LB then upgrade with one of the packages in the development section that has root pre-installed.
If you have an UB then you need to unlock it and flash one of the stock kernels with CWM

4.3 vs 4.1
Matt...
Thanks for your response
I was rooted before I updated my firmware to 9.2.A.0.295. Did the firmware upgrade me from 4.1>4.3 as well because I thought I was 4.3 before?
Previously I was able to achieve root by using Bin4ry v31 however since I upgraded the firmware I've lost root access and Bin4ry v33 doesn't seem to be working to restore it, I have also tried DooMLoRD v18, Kingo Root & SuperOneClick.
Are you familiar with any of the above Bin4ry, DooMLoRD, Kingo Root & SuperOneClick?
I am an avid computer user however I don't understand some of the terms and abbreviations you provided below such as LB and UB as I am new to phone mods
Any further help you could provide or others could provide would be greatly appreciated...in the simplest of terms
Thanks...Rasher0123
matt4321 said:
currently the only way to have root on 4.3 is to downgrade to 4.1, then root, flash CWM for LB then upgrade with one of the packages in the development section that has root pre-installed.
If you have an UB then you need to unlock it and flash one of the stock kernels with CWM
Click to expand...
Click to collapse

Rasher0123 said:
Matt...
Thanks for your response
I was rooted before I updated my firmware to 9.2.A.0.295. Did the firmware upgrade me from 4.1>4.3 as well because I thought I was 4.3 before?
Click to expand...
Click to collapse
Rasher0123, you would have been rooted on Jellybean 4.1.2 before. The Xperia T's have only recently officially got JB 4.3 with this 9.2.A.0.295 update that started to roll out last month.
Rasher0123 said:
Previously I was able to achieve root by using Bin4ry v31 however since I upgraded the firmware I've lost root access and Bin4ry v33 doesn't seem to be working to restore it, I have also tried DooMLoRD v18 & Kingo Root.
Are you familiar with any of the above Bin4ry, DooMLoRD & Kingo?
I am an avid computer user however I don't understand some of the terms and abbreviations you provided below such as LB and UB as I am new to phone mods
Any further help you could provide or others could provide would be greatly appreciated...in the simplest of terms
Thanks...Rasher0123
Click to expand...
Click to collapse
LB = locked bootloader
UB = unlocked bootloader
As someone new to phone mods a good place to start is the All in One Thread that's at the top of this Q&A forum.
I managed to keep root with an Over-The-Air update from JB 4.1.2 (FW: 9.1.A.1.141) to JB 4.3 (FW: 9.2.A.1.199) following this thread, so you could give that a try. Whether you go by Matt's advise or follow the method in the thread I've linked, I believe downgrading to JB 4.1 using flashtool will wipe your settings so make sure to backup beforehand.

Flashmode
BarneyJ & Matt...
I am trying to use Sony Mobile Flasher by Androxyde and downgrade from 9.2.A.0.295 to 9.1.A.1.141 but after Preparing Files For Flashing I can't get past the Wait For Flashmode pop-up. I unplug my Sony Xperia T from the USB cable attached to my computer. I power off my Sony Xperia T. I then hold the volume down and immediately or a second or so later replug my Sony Xperia T to the USB cable attached to my computer however NOTHING happens. This is driving me nuts! I've been trying almost all day to no avail. Please help
...Rasher0123
BarneyJ said:
Rasher0123, you would have been rooted on Jellybean 4.1.2 before. The Xperia T's have only recently officially got JB 4.3 with this 9.2.A.0.295 update that started to roll out last month.
LB = locked bootloader
UB = unlocked bootloader
As someone new to phone mods a good place to start is the All in One Thread that's at the top of this Q&A forum.
I managed to keep root with an Over-The-Air update from JB 4.1.2 (FW: 9.1.A.1.141) to JB 4.3 (FW: 9.2.A.1.199) following this thread, so you could give that a try. Whether you go by Matt's advise or follow the method in the thread I've linked, I believe downgrading to JB 4.1 using flashtool will wipe your settings so make sure to backup beforehand.
Click to expand...
Click to collapse

Power Button & Volume Down
Unfreaking believable I've been trying for hours and finally...with my replugged Sony Xperia T to the USB cable attached to my computer I hold the volume down and push the power button and immediately Flashmode started! No where did I read or see instruction to push the power button let alone while holding another button!! We'll see what happens from here
Rasher0123 said:
BarneyJ & Matt...
I am trying to use Sony Mobile Flasher by Androxyde and downgrade from 9.2.A.0.295 to 9.1.A.1.141 but after Preparing Files For Flashing I can't get past the Wait For Flashmode pop-up. I unplug my Sony Xperia T from the USB cable attached to my computer. I power off my Sony Xperia T. I then hold the volume down and immediately or a second or so later replug my Sony Xperia T to the USB cable attached to my computer however NOTHING happens. This is driving me nuts! I've been trying almost all day to no avail. Please help
...Rasher0123
Click to expand...
Click to collapse

Rasher0123 said:
Unfreaking believable I've been trying for hours and finally...with my replugged Sony Xperia T to the USB cable attached to my computer I hold the volume down and push the power button and immediately Flashmode started! No where did I read or see instruction to push the power button let alone while holding another button!! We'll see what happens from here
Click to expand...
Click to collapse
Volume up is fastboot mode.

Bootloop
Do I need to know that Volume up is fastboot mode?
Now I am stuck in Bootloop. My flash was successful but when I rebooted upon direction from the software it's now stuck in Bootloop. What can I do to get out of Bootloop?! HELP
nlooooo said:
Volume up is fastboot mode.
Click to expand...
Click to collapse

Volume Up & Power Button For 5 Seconds
Well I held the Volume Up & Power Button For 5 Seconds and it turned my phone off taking me out of Bootloop. Then I restarted the Flashmode by again holding Volume Down & Power Button and now my phone is reflashing...success...I am successfully downgraded & booted into 4.1.2. The negative is that it's a factory fresh install, not sure if that was preventable but I'll work with it...now to try BarneyJ's method...I couldn't get Flashtool nor SuperOneClick to Root my device but Kingo Root worked!
Rasher0123 said:
Do I need to know that Volume up is fastboot mode?
Now I am stuck in Bootloop. My flash was successful but when I rebooted upon direction from the software it's now stuck in Bootloop. What can I do to get out of Bootloop?! HELP
Click to expand...
Click to collapse

CWM Installation
So I've successfully downgraded my device from 4.3 > 4.1.2 and I've successfully Rooted my device using Kingo Root. Now I am trying to install CWM4XperiaT_v9i_JB but I get a consistent 'adb server is out of date. killing... ADB server didn't ACK * failed to start daemon * error:' over and over how can I overcome this, once again HELP PLEASE how can I install CWM?

Rasher0123 said:
Do I need to know that Volume up is fastboot mode?
Click to expand...
Click to collapse
You surely don't know what are good manners, so you don't even deserve a time that someone could spend on you.

My apologies if my comment appeared rude
I didn't intend for my comment to be rude, I honestly was just asking if I needed to know that. I am a new user to phone mods and have spent over the last 24hrs trying to overcome many roadblocks
nlooooo said:
You surely don't know what are good manners, so you don't even deserve a time that someone could spend on you.
Click to expand...
Click to collapse

Firsr of all don't use CWM v9 it has bugs, try v8.
Before you start terminal open Win Task manager and close all adb processes and try again.

nlooooo...
Thanks for the advice of using CWM v8 instead of v9
I've been reading this link http://forum.xda-developers.com/showthread.php?t=865245 but I'm very confused by 'Step 2.
Unzip the file you chose (cwmod_internal.zip OR cwmod_microsd.zip) to the root folder on the storage option of your choice.
So, for example, if the storage option you chose has the drive letter “F:” assigned to it when hooked up to your computer, you would want it to look something like this…
A folder located at “F:\recovery”
A file located at “F:\update.zip”;
Does that mean I unzip it to my phone directly? Any walkthrough you can provide would be greatly appreciated. I am so frustrated and confused, I haven't had anything go straightforward in this whole process that has taken me over 24hrs.
nlooooo said:
Firsr of all don't use CWM v9 it has bugs, try v8.
Before you start terminal open Win Task manager and close all adb processes and try again.
Click to expand...
Click to collapse

Just use the installer of v9 (with .bat file) and replace recovery.zip with older version.

CWM Installation
I am stuck...
So I've successfully downgraded my device from 4.3 > 4.1.2 and I've successfully Rooted my device using Kingo Root. Now I am trying to install CWM but I don't know how to do it even though I've read MANY posts and watched several videos. HELP PLEASE how can I install CWM? I really need a step by step walkthrough with files attached PLEASE I don't know how to do it and even though I've tried non of the files I've found seem to work......I am running a Bell Sony Xperia T LT30a on 4.1.2 with Locked Bootloader (not unlockable)

Rasher0123 said:
I am stuck...
So I've successfully downgraded my device from 4.3 > 4.1.2 and I've successfully Rooted my device using Kingo Root. Now I am trying to install CWM but I don't know how to do it even though I've read MANY posts and watched several videos. HELP PLEASE how can I install CWM? I really need a step by step walkthrough with files attached PLEASE I don't know how to do it and even though I've tried non of the files I've found seem to work......I am running a Sony Xperia T LT30p on 4.1.2 with Locked Bootloader (not unlockable)
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=2012738
Find text:
Older versions can be found here.
And on the right side if page find link to download v8 installer (the first with mark v8), and unpack folder from zip.
Enable USB debugging on phone (developer options) and connect booted phone.
From unpacked folder run install.bat and Grant superuser access when prompt.

Boot Into Recovery?
I downloaded the file CWM4XperiaT_v8i_JB and installed it
https://www.dropbox.com/s/903lf9pzwfq8enz/CWM4XperiaT_v8i_JB.jpg
It appears to have worked but I don't know how to test it and I can't seem to boot into recovery. I've tried by having the phone disconnected from the computer, shutting down the phone and then once shut down holding the volume up button and pushing power. It just regular boots. I have also tried When SONY logo appears: On Xperia T/TL/TX press repeatedly (not holding) volume-down button until the phone vibrates. The phone does not vibrate and just regular boots. I've also tried a program from Google Play Store called Quick Boot which I selected Recovery within the program and the phone reboots but again just regular boots.
More suggestions please?
nlooooo said:
Go here:
http://forum.xda-developers.com/showthread.php?t=2012738
Find text:
Older versions can be found here.
And on the right side if page find link to download v8 installer (the first with mark v8), and unpack folder from zip.
Enable USB debugging on phone (developer options) and connect booted phone.
From unpacked folder run install.bat and Grant superuser access when prompt.
Click to expand...
Click to collapse

Try installer again.

LTE
New more important problem, I've lost Mobile Date/LTE how do I get that back?!
nlooooo said:
Try installer again.
Click to expand...
Click to collapse

rooting problem ,i can't enter flashmode

hello guys i rooted my xperia z using fastboot tool and i had a problem with it ,when i connect it with the flash tool it connect but the usb debugging is off !!!!!!! , i turn it on but it doesn't work ! , when i try to put the stock framware 4.4.2 .it stops it 0%!!, i used root checker and i found that i doesn't have a proper root access.:crying:i had a backup with sony pc companion but it didn't help , ,also i try SuberSU it tills me that 'ther is no su binary installed and supersu can't install it !! please help me i don't know any thing about root

At first you should check towelroot thread. Its simplest way to get root.
But the flashtool should start from the beginning. close flashtool program, install drivers from \flashtool\drivers. kill all processes that use adb.exe (all instances of adb.exe, pc compagnion in task manager) and start over.
I suggest you check what condition is the usb cable. Once cheap cable was fault of brick my xperia S.
PS. You do not need to have enabled debugging for flashing.